1 files changed, 0 insertions, 128 deletions
diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds
deleted file mode 100644
index 4142aa9..0000000
--- a/doc/README.mpc832xemds
+++ /dev/null
@@ -1,128 +0,0 @@
-Freescale MPC832XEMDS Board
------------------------------------------
-1. Board Switches and Jumpers
-1.0 There are five Dual-In-Line Packages(DIP) Switches on MPC832XE SYS board
-	For some reason, the HW designers describe the switch settings
-	in terms of 0 and 1, and then map that to physical switches where
-	the label "On" refers to logic 0 and "Off" is logic 1.
-
-	Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
-	bits may contribute to signals that are numbered based at 0,
-	and some of those signals may be high-bit-number-0 too.  Heed
-	well the names and labels and do not get confused.
-
-		"Off" == 1
-		"On"  == 0
-
-	SW3 is switch 18 as silk-screened onto the board.
-	SW4[8] is the bit labeled 8 on Switch 4.
-	SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
-	SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
-	SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
-		and bits labeled 8 is set as "Off".
-
-1.1 For the MPC832XEMDS PROTO Board
-
-	First, make sure the board default setting is consistent with the document
-		 shipped with your board. Then apply the following setting:
-	SW3[1-8]= 0000_1000  (core PLL setting, core enable)
-	SW4[1-8]= 0001_0010  (Flash boot on local bus, system PLL setting)
-	SW5[1-8]= 0010_0110  (Boot from high end)
-	SW6[1-8]= 0011_0100  (Flash boot on 16 bit local bus)
-	SW7[1-8]= 1000_0011  (QE PLL setting)
-
-	ENET3/4 MII mode settings:
-	J1 1-2 (ETH3_TXER)
-	J2 2-3 (MII mode)
-	J3 2-3 (MII mode)
-	J4 2-3 (ADSL clockOscillator)
-	J5 1-2 (ETH4_TXER)
-	J6 2-3 (ClockOscillator)
-	JP1 removed (don't force PORESET)
-	JP2 mounted (ETH4/2 MII)
-	JP3 mounted (ETH3 MII)
-	JP4 mounted (HRCW from BCSR)
-
-	ENET3/4 RMII mode settings:
-	J1 1-2 (ETH3_TXER)
-	J2 1-2 (RMII mode)
-	J3 1-2 (RMII mode)
-	J4 2-3 (ADSL clockOscillator)
-	J5 1-2 (ETH4_TXER)
-	J6 2-3 (ClockOscillator)
-	JP1 removed (don't force PORESET)
-	JP2 removed (ETH4/2 RMII)
-	JP3 removed (ETH3 RMII)
-	JP4 removed (HRCW from FLASH)
-
-	on board Oscillator: 66M
-
-
-2. Memory Map
-
-2.1 The memory map should look pretty much like this:
-
-	0x0000_0000	0x7fff_ffff	DDR			2G
-	0x8000_0000	0x8fff_ffff	PCI MEM prefetch	256M
-	0x9000_0000	0x9fff_ffff	PCI MEM non-prefetch	256M
-	0xc000_0000	0xdfff_ffff	Empty			512M
-	0xe000_0000	0xe01f_ffff	Int Mem Reg Space	2M
-	0xe020_0000	0xe02f_ffff	Empty			1M
-	0xe030_0000	0xe03f_ffff	PCI IO			1M
-	0xe040_0000	0xefff_ffff	Empty			252M
-	0xf400_0000	0xf7ff_ffff	Empty			64M
-	0xf800_0000	0xf800_7fff	BCSR on CS1		32K
-	0xf800_8000	0xf800_ffff	PIB CS2			32K
-	0xf801_0000	0xf801_7fff	PIB CS3			32K
-	0xfe00_0000	0xfeff_ffff	FLASH on CS0		16M
-
-
-3. Definitions
-
-3.1 Explanation of NEW definitions in:
-
-	include/configs/MPC832XEPB.h
-
-    CONFIG_MPC83xx	MPC83xx family for MPC8349, MPC8360 and MPC832x
-    CONFIG_MPC832x	MPC832x specific
-    CONFIG_MPC832XEMDS	MPC832XEMDS board specific
-
-4. Compilation
-
-	Assuming you're using BASH shell:
-
-		export CROSS_COMPILE=your-cross-compile-prefix
-		cd u-boot
-		make distclean
-		make MPC832XEMDS_config
-		make
-
-	MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
-
-		1)Make sure the DIP SW support PCI mode as described in Section 1.1.
-
-		2)To Make U-Boot image support PCI 33MHz, use
-			Make MPC832XEMDS_HOST_33_config
-
-		3)To Make U-Boot image support PCI 66MHz, use
-			Make MPC832XEMDS_HOST_66M_config
-
-5. Downloading and Flashing Images
-
-5.0 Download over network:
-
-	tftp 10000 u-boot.bin
-
-5.1 Reflash U-boot Image using U-boot
-
-	tftp 20000 u-boot.bin
-	protect off fe000000 fe0fffff
-	erase fe000000 fe0fffff
-	cp.b 20000 fe000000 xxxx
-
-You have to supply the correct byte count with 'xxxx' from the TFTP result log.
-Maybe 3ffff will work too, that corresponds to the erased sectors.
-
-
-6. Notes
-	1) The console baudrate for MPC832XEMDS is 115200bps.