diff options
Diffstat (limited to 'doc/README.mpc8323erdb')
| -rw-r--r-- | doc/README.mpc8323erdb | 71 |
1 files changed, 0 insertions, 71 deletions
diff --git a/doc/README.mpc8323erdb b/doc/README.mpc8323erdb deleted file mode 100644 index 6f89829..0000000 --- a/doc/README.mpc8323erdb +++ /dev/null @@ -1,71 +0,0 @@ -Freescale MPC8323ERDB Board ------------------------------------------ - -1. Memory Map - The memory map looks like this: - - 0x0000_0000 0x03ff_ffff DDR 64M - 0x8000_0000 0x8fff_ffff PCI MEM 256M - 0x9000_0000 0x9fff_ffff PCI_MMIO 256M - 0xe000_0000 0xe00f_ffff IMMR 1M - 0xd000_0000 0xd3ff_ffff PCI IO 64M - 0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M - -2. Compilation - - Assuming you're using BASH (or similar) as your shell: - - export CROSS_COMPILE=your-cross-compiler-prefix- - make distclean - make MPC8323ERDB_config - make - -3. Downloading and Flashing Images - -3.1 Reflash U-boot Image using U-boot - - N.b, have an alternate means of programming - the flash available if the new u-boot doesn't boot. - - First try a: - - tftpboot $loadaddr $uboot - - to make sure that the TFTP load will succeed before - an erase goes ahead and wipes out your current firmware. - Then do a: - - run tftpflash - - which is a shorter version of the manual sequence: - - tftp $loadaddr u-boot.bin - protect off fe000000 +$filesize - erase fe000000 +$filesize - cp.b $loadaddr fe000000 $filesize - - To keep your old u-boot's environment variables, do a: - - saveenv - - prior to resetting the board. - -3.2 Downloading and Booting Linux Kernel - - Ensure that all networking-related environment variables are set - properly (including ipaddr, serverip, gatewayip (if needed), - netmask, ethaddr, eth1addr, rootpath (if using NFS root), - fdtfile, and bootfile). - - Then, do one of the following, depending on whether you - want an NFS root or a ramdisk root: - - run nfsboot - - or - - run ramboot - -4 Notes - - The console baudrate for MPC8323ERDB is 115200bps. |