diff options
Diffstat (limited to 'doc/README.modnet50')
| -rw-r--r-- | doc/README.modnet50 | 62 |
1 files changed, 0 insertions, 62 deletions
diff --git a/doc/README.modnet50 b/doc/README.modnet50 deleted file mode 100644 index 2ac3c8f..0000000 --- a/doc/README.modnet50 +++ /dev/null @@ -1,62 +0,0 @@ -U-BOOT Port for FSForth ModNET50 Board --------------------------------------- - -author: Thomas Elste <info@elste.org> - IMMS gGmbH <www.imms.de> - -The port based upon an early (partial complete) -armboot-port from Stephan Linz for the ModNET50 Board. - - -Overview: - -- board with Netsilicon NET+50 ARM7TDMI CPU without MMU -- 16 MB SDRAM -- 2 MB Flash (MBL29LV160BE) -- 10/100 Ethernet PHY (LXT971A) - - -Current Configuration (include/configs/modnet50.h): - -Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM - 0x10000000 - 0x101FFFFF 2M Flash - -The Flash uses a BB-Architectur with 35 sectors -(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in -the first 5 sectors. - -The environment is located at the end of the 4th Flash -sector (0x1001C000-0x1001FFFF). - -Build: - -U-boot should be build by using the ELDK Toolchain (arm-linux-*). - - make modnet50_config - make - - -Status: - -Everything seems to work fine. Booting images was tested by -booting uCLinux (with and without a separate ramdisk image) from -flash. - - -Files: - -arch/arm/cpu/arm720t/serial_netarm.c .. serial I/O for the cpu - -board/modnet50/lowlevel_init.S .. memory setup for ModNET50 -board/modnet50/flash.c .. flash routines -board/modnet50/modnet50.c .. some board init stuff - -drivers/net/netarm_eth.c .. ethernet driver for the NET+50 CPU -drivers/net/netarm_eth.h .. header for ethernet driver - -include/configs/modnet50.h .. configuration file for ModNET50 - -include/netarm_*.h .. register and macro definitions for - the NETARM CPU family - -doc/README.modnet50 .. this readme |