diff options
Diffstat (limited to 'doc/README.lynxkdi')
| -rw-r--r-- | doc/README.lynxkdi | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/doc/README.lynxkdi b/doc/README.lynxkdi new file mode 100644 index 0000000..8fdf495 --- /dev/null +++ b/doc/README.lynxkdi @@ -0,0 +1,57 @@ + LYNX KDI SUPPORT + + Last Update: July 20, 2003 +======================================================================= + +This file describes support for LynuxWorks KDI within U-Boot. Support +is enabled by defining CONFIG_LYNXKDI. + + +LYNXOS AND BLUECAT SUPPORTED +============================ +Both LynxOS and BlueCat linux KDIs are supported. The implementation +automatically detects which is being booted. When you use mkimage +you should specify "lynxos" for both (see target-specific notes). + + +SUPPORTED ARCHITECTURE/TARGETS +============================== +The following targets have been tested: + +-PowerPC MPC8260ADS + + +FILES TO LOOK AT +================ +include/lynxkdi.h -defines a simple struct passed to a kdi. +common/lynxkdi.c -implements the call to the kdi. +common/cmd_bootm.c -top-level command implementation ("bootm"). + + +==================================================================== +TARGET SPECIFIC NOTES +==================================================================== + +MPC8260ADS +=========== +The default LynxOS and BlueCat implementations require some +modifications to the config file. + +Edit include/configs/MPC8260ADS.h to use the following: + +#define CFG_IMMR 0xFA200000 +#define CFG_BCSR 0xFA100000 +#define CFG_BR1_PRELIM 0xFA101801 + +When creating a LynxOS or BlueCat u-boot image using mkimage, +you must specify the following: + +Both: -A ppc -O lynxos -T kernel -C none +LynxOS: -a 0x00004000 -e 0x00004020 +BlueCat: -a 0x00500000 -e 0x00507000 + +To pass the MAC address to BlueCat you should define the +"fcc2_ether_addr" parameter in the "bootargs" environment +variable. E.g.: + +==> setenv bootargs fcc2_ether_addr=00:11:22:33:44:55:66 |