summaryrefslogtreecommitdiff
path: root/doc/README.fsl-ddr
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.fsl-ddr')
-rw-r--r--doc/README.fsl-ddr69
1 files changed, 69 insertions, 0 deletions
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
new file mode 100644
index 0000000..9c2224f
--- /dev/null
+++ b/doc/README.fsl-ddr
@@ -0,0 +1,69 @@
+
+Table of interleaving modes supported in cpu/8xxx/ddr/
+======================================================
+ +-------------+---------------------------------------------------------+
+ | | Rank Interleaving |
+ | +--------+-----------+-----------+------------+-----------+
+ |Memory | | | | 2x2 | 4x1 |
+ |Controller | None | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
+ |Interleaving | | {CS0+CS1} | {CS2+CS3} | {CS2+CS3} | CS2+CS3} |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |None | Yes | Yes | Yes | Yes | Yes |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Cacheline | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Page | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Bank | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Superbank | No | Yes | No | No, Only(*)| Yes |
+ | | | | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ (*) Although the hardware can be configured with memory controller
+ interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
+ from each controller. {CS2+CS3} on each controller are only rank
+ interleaved on that controller.
+
+The ways to configure the ddr interleaving mode
+==============================================
+1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
+ under "CONFIG_EXTRA_ENV_SETTINGS", like:
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "memctl_intlv_ctl=2\0" \
+ ......
+
+2. Run u-boot "setenv" command to configure the memory interleaving mode.
+ Either numerical or string value is accepted.
+
+ # disable memory controller interleaving
+ setenv memctl_intlv_ctl
+
+ # cacheline interleaving
+ setenv memctl_intlv_ctl 0 or setenv memctl_intlv_ctl cacheline
+
+ # page interleaving
+ setenv memctl_intlv_ctl 1 or setenv memctl_intlv_ctl page
+
+ # bank interleaving
+ setenv memctl_intlv_ctl 2 or setenv memctl_intlv_ctl bank
+
+ # superbank
+ setenv memctl_intlv_ctl 3 or setenv memctl_intlv_ctl superbank
+
+ # disable bank (chip-select) interleaving
+ setenv ba_intlv_ctl
+
+ # bank(chip-select) interleaving cs0+cs1
+ setenv ba_intlv_ctl 0x40 or setenv ba_intlv_ctl cs0_cs1
+
+ # bank(chip-select) interleaving cs2+cs3
+ setenv ba_intlv_ctl 0x20 or setenv ba_intlv_ctl cs2_cs3
+
+ # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3) (2x2)
+ setenv ba_intlv_ctl 0x60 or setenv ba_intlv_ctl cs0_cs1_and_cs2_cs3
+
+ # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
+ setenv ba_intlv_ctl 0x04 or setenv ba_intlv_ctl cs0_cs1_cs2_cs3