summaryrefslogtreecommitdiff
path: root/doc/README.evb64260
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.evb64260')
-rw-r--r--doc/README.evb6426054
1 files changed, 0 insertions, 54 deletions
diff --git a/doc/README.evb64260 b/doc/README.evb64260
deleted file mode 100644
index 74211de..0000000
--- a/doc/README.evb64260
+++ /dev/null
@@ -1,54 +0,0 @@
-This file contains status information for the port of U-Boot to the
-Galileo Evaluation Board.
-
-Author: Josh Huber <huber@mclx.com>
- Mission Critical Linux, Inc.
-
-The support for the Galileo Evaluation board is fairly minimal now.
-It's sufficient to boot Linux, but doesn't provide too much more than
-what's required to do this.
-
-Both DUART channels are supported (to use the second one, you have to
-modify the board -- see the schematics for where to solder on the
-devices module). The ethernet ports are supported, and the MPSC is
-supported as a console driver. (keep in mind that the kernel has no
-support for this yet)
-
-There are still occaisonal lockups with the MPSC console driver due to
-(we think!) overrun problems. If you're looking for something stable
-to use for Linux development, consider sticking with the DUART console
-for now.
-
-Automatic memory sizing mostly works. We've had problems with some
-combinations of memory. Please send us email if you're having trouble
-with respect to the memory detection.
-
-Right now, only the 512k boot flash is supported. Support for the
-16MB flash on the devices module is forthcoming. Right now the flash
-is stored at the 256k boundry in flash, wasting a whole sector (64k!)
-for environment data. This isn't really a big deal since we're not
-using the 512k for anything else. (Just U-Boot and the environment)
-
-Finally, here is a sample output session:
-
-U-Boot 1.0.0-pre1 (Jun 6 2001 - 12:45:11)
-
-Initializing...
- CPU: MPC7400 (altivec enabled) v2.9
- Board: EVB64260
- DRAM: 256 MB
- FLASH: 512 kB
- In: serial
- Out: serial
- Err: serial
-
-=>
-
-The default configuration should be correct for the evaluation board,
-as it's shipped from Galileo. Keep in mind that the default baudrate
-is set to 38400, 8N1.
-
-Good luck, and make sure to send any bugreports to us (or the
-u-boot-users list).
-
-Josh