diff options
Diffstat (limited to 'doc/README.alaska8220')
| -rw-r--r-- | doc/README.alaska8220 | 482 |
1 files changed, 0 insertions, 482 deletions
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220 deleted file mode 100644 index 3345073..0000000 --- a/doc/README.alaska8220 +++ /dev/null @@ -1,482 +0,0 @@ -Freescale Alaska MPC8220 board -============================== - -TsiChung Liew(Tsi-Chung.Liew@freescale.com) -Created 9/21/04 -=========================================== - - -Changed files: -============== - -- Makefile added MPC8220 and Alaska8220_config -- MAKEALL added MPC8220 and Alaska8220 -- README added CONFIG_MPC8220, Alaska8220_config - -- common/cmd_bdinfo.c added board information members for MPC8220 -- common/cmd_bootm.c added clocks for MPC8220 in do_bootm_linux() - -- include/common.h added CONFIG_MPC8220 - -- include/asm-ppc/u-boot.h added board information members for MPC8220 -- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk, - vco_clk, pev_clk, flb_clk, and bExtUart - -- arch/powerpc/lib/board.c added CONFIG_MPC8220 support - -- net/eth.c added FEC support for MPC8220 - -Added files: -============ -- board/alaska directory for Alaska MPC8220 -- board/alaska/alaska.c Alaska dram and BATs setup -- board/alaska/extserial.c external serial (debug card serial) support -- board/alaska/flash.c Socket (AMD) and Onboard (INTEL) flash support -- board/alaska/serial.c to determine which int/ext serial to use -- board/alaska/Makefile Makefile -- board/alaska/config.mk config make -- board/alaska/u-boot.lds Linker description - -- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file -- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file -- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file -- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code -- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup -- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup -- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver -- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver -- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable) -- arch/powerpc/cpu/mpc8220/loadtask.c load dma -- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock -- arch/powerpc/cpu/mpc8220/traps.c exception -- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver -- arch/powerpc/cpu/mpc8220/Makefile Makefile -- arch/powerpc/cpu/mpc8220/config.mk config make -- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program -- arch/powerpc/cpu/mpc8220/io.S io functions -- arch/powerpc/cpu/mpc8220/start.S start up - -- include/mpc8220.h - -- include/asm-ppc/immap_8220.h - -- include/configs/Alaska8220.h - - -1. SWITCH SETTINGS -================== -1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL) - SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART - SW3: unsed - SW4: 0 - 1284 or 1 - FEC1 - SW5: 0 - PEV or 1 - FEC2 - - -2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL -=========================================== -2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and - linux kernel, you can customize it based on your system requirements: - DDR: 0x00000000-0x1fffffff (max 512MB) - MBAR: 0xf0000000-0xf0027fff (128KB) - CPLD: 0xf1000000-0xf103ffff (256KB) - FPGA: 0xf2000000-0xf203ffff (256KB) - Flash: 0xfe000000-0xffffffff (max 32MB) - -3. DEFINITIONS AND COMPILATION -============================== -3.1 Explanation on NEW definitions in include/configs/alaska8220.h - CONFIG_MPC8220 MPC8220 specific - CONFIG_ALASKA8220 Alaska board specific - CONFIG_SYS_MPC8220_CLKIN Define Alaska Input Clock - CONFIG_PSC_CONSOLE Enable MPC8220 UART - CONFIG_EXTUART_CONSOLE Enable External 16552 UART - CONFIG_SYS_AMD_BOOT To determine the u-boot is booted from AMD or Intel - CONFIG_SYS_MBAR MBAR base address - CONFIG_SYS_DEFAULT_MBAR Reset MBAR base address - -3.2 Compilation - export CROSS_COMPILE=cross-compile-prefix - cd u-boot-1-1-x - make distclean - make Alaska8220_config - make - - -4. SCREEN DUMP -============== -4.1 Alaska MPC8220 board - Boot from AMD (NOTE: May not show exactly the same) - -U-Boot 1.1.1 (Sep 22 2004 - 22:14:41) - -CPU: MPC8220 (JTAG ID 1640301d) at 300 MHz - Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz -Board: Alaska MPC8220 Evaluation Board -I2C: 93 kHz, ready -DRAM: 256 MB -Reserving 167k for U-Boot at: 0ffd6000 -FLASH: 16.5 MB -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -Net: FEC ETHERNET -=> flinfo - -Bank # 1: INTEL 28F128J3A - Size: 8 MB in 64 Sectors - Sector Start Addresses: - FE000000 FE020000 FE040000 FE060000 FE080000 - FE0A0000 FE0C0000 FE0E0000 FE100000 FE120000 - FE140000 FE160000 FE180000 FE1A0000 FE1C0000 - FE1E0000 FE200000 FE220000 FE240000 FE260000 - FE280000 FE2A0000 FE2C0000 FE2E0000 FE300000 - FE320000 FE340000 FE360000 FE380000 FE3A0000 - FE3C0000 FE3E0000 FE400000 FE420000 FE440000 - FE460000 FE480000 FE4A0000 FE4C0000 FE4E0000 - FE500000 FE520000 FE540000 FE560000 FE580000 - FE5A0000 FE5C0000 FE5E0000 FE600000 FE620000 - FE640000 FE660000 FE680000 FE6A0000 FE6C0000 - FE6E0000 FE700000 FE720000 FE740000 FE760000 - FE780000 FE7A0000 FE7C0000 FE7E0000 - -Bank # 2: INTEL 28F128J3A - Size: 8 MB in 64 Sectors - Sector Start Addresses: - FE800000 FE820000 FE840000 FE860000 FE880000 - FE8A0000 FE8C0000 FE8E0000 FE900000 FE920000 - FE940000 FE960000 FE980000 FE9A0000 FE9C0000 - FE9E0000 FEA00000 FEA20000 FEA40000 FEA60000 - FEA80000 FEAA0000 FEAC0000 FEAE0000 FEB00000 - FEB20000 FEB40000 FEB60000 FEB80000 FEBA0000 - FEBC0000 FEBE0000 FEC00000 FEC20000 FEC40000 - FEC60000 FEC80000 FECA0000 FECC0000 FECE0000 - FED00000 FED20000 FED40000 FED60000 FED80000 - FEDA0000 FEDC0000 FEDE0000 FEE00000 FEE20000 - FEE40000 FEE60000 FEE80000 FEEA0000 FEEC0000 - FEEE0000 FEF00000 (RO) FEF20000 (RO) FEF40000 FEF60000 - FEF80000 FEFA0000 FEFC0000 FEFE0000 (RO) - -Bank # 3: AMD AMD29F040B - Size: 0 MB in 7 Sectors - Sector Start Addresses: - FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000 FFF40000 - FFF50000 FFF60000 - -Bank # 4: AMD AMD29F040B - Size: 0 MB in 1 Sectors - Sector Start Addresses: - FFF70000 (RO) -=> bdinfo - -memstart = 0xF0009800 -memsize = 0x10000000 -flashstart = 0xFFF00000 -flashsize = 0x01080000 -flashoffset = 0x00025000 -sramstart = 0xF0020000 -sramsize = 0x00008000 -bootflags = 0x00000001 -intfreq = 300 MHz -busfreq = 120 MHz -inpfreq = 30 MHz -flbfreq = 30 MHz -pcifreq = 30 MHz -vcofreq = 480 MHz -pevfreq = 81 MHz -ethaddr = 00:E0:0C:BC:E0:60 -eth1addr = 00:E0:0C:BC:E0:61 -IP addr = 192.162.1.2 -baudrate = 115200 bps -=> printenv -bootargs=root=/dev/ram rw -bootdelay=5 -baudrate=115200 -ethaddr=00:e0:0c:bc:e0:60 -eth1addr=00:e0:0c:bc:e0:61 -ipaddr=192.162.1.2 -serverip=192.162.1.1 -gatewayip=192.162.1.1 -netmask=255.255.255.0 -hostname=Alaska -stdin=serial -stdout=serial -stderr=serial -ethact=FEC ETHERNET - -Environment size: 268/65532 bytes -=> setenv ipaddr 192.160.1.2 -=> setenv serverip 192.160.1.1 -=> setenv gatewayip 192.160.1.1 -=> saveenv -Saving Environment to Flash... - -. -Un-Protected 1 sectors -Erasing Flash... -Erasing sector 0 ... done -Erased 1 sectors -Writing to Flash... done - -. -Protected 1 sectors -=> tftp 0x10000 linux.elf -Using FEC ETHERNET device -TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1 -Filename 'linux.elf'. -Load address: 0x10000 -Loading: invalid RARP header -################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################## -done -Bytes transferred = 2917494 (2c8476 hex) -=> bootelf -Loading .text @ 0x00a00000 (23820 bytes) -Loading .data @ 0x00a06000 (2752512 bytes) -Clearing .bss @ 0x00ca6000 (12764 bytes) -## Starting application at 0x00a00000 ... - -Collect some entropy from RAM........done -loaded at: 00A00000 00CA91DC -zimage at: 00A06A93 00AD7756 -initrd at: 00AD8000 00CA5565 -avail ram: 00CAA000 014AA000 - -Linux/PPC load: ip=off console=ttyS0,115200 -Uncompressing Linux...done. -Now booting the kernel -Total memory in system: 256 MB -Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb -Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004 -Motorola Alaska port (C) 2003 Motorola, Inc. -CPLD rev 3 -CPLD switches 0x1b -Set Pin Mux for FEC1 -Set Pin Mux for FEC2 -Alaska Pin Multiplexing: -Port Configuration Register 0 = 0 -Port Configuration Register 1 = 0 -Port Configuration Register 2 = 0 -Port Configuration Register 3 = 50000000 -Port Configuration Register 3 - PCI = 51400180 -Setup Alaska FPGA PIC: -Interrupt Enable Register *(u32) = 0 -Interrupt Status Register = 2f0000 -Interrupt Enable Register in_be32 = 0 -Interrupt Status Register = 2f0000 -Interrupt Enable Register in_le32 = 0 -Interrupt Status Register = 2f00 -Interrupt Enable Register readl = 0 -Interrupt Status Register = 2f00 -Interrupt Enable Register = 0 -Interrupt Status Register = 2f0000 -Setup Alaska PCI Controller: -On node 0 totalpages: 65536 -zone(0): 65536 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: ip=off console=ttyS0,115200 -Using XLB clock (120.00 MHz) to set up decrementer -Calibrating delay loop... 199.88 BogoMIPS -Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem) -Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) -Inode cache hash table entries: 16384 (order: 5, 131072 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) -Page-cache hash table entries: 65536 (order: 6, 262144 bytes) -POSIX conformance testing by UNIFIX -PCI: Probing PCI hardware -PCI: (pcibios_init) Global-Hose = 0xc029d000 -Scanning bus 00 -Fixups for bus 00 -Bus scan for 00 returning with max=00 -PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000) -PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1 -PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing! -PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88 -PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4 -PCI: (pcibios_init) finished allocating and assigning resources! -initDma! -Using 90 DMA buffer descriptors -descUsed f0023600, descriptors f002360c freeSram f0024140 -unmask SDMA tasks: 0xf0008018 = 0x6f000000 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -Journalled Block Device driver loaded -JFFS version 1.0, (C) 1999, 2000 Axis Communications AB -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -pty: 256 Unix98 ptys configured -tracek: Copyright (C) Motorola, 2003. -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xf1001008 (irq = 73) is a ST16650 -ttyS01 at 0xf1001010 (irq = 74) is a ST16650 -elp-fpanel: Copyright (C) Motorola, 2003. -fpanel: fpanelWait timeout -elp-engine: Copyright (C) Motorola, 2003. -Video disabled due to configuration switch 4 -Alpine 1284 driver: Copyright (C) Motorola, 2003. -1284 disabled due to configuration switch 5 -Alpine USB driver: Copyright (C) Motorola, 2003. -OK -USB: Descriptor download completed OK -enable_irq(41) unbalanced -enable_irq(75) unbalanced -elp-dmaram: Copyright (C) Motorola, 2003. -Total memory in system: 256 MB -elp_dmaram: offset is 0x10000000, size is 0 -Xicor NVRAM driver: Copyright (C) Motorola, 2003. -elp-video: Copyright (C) Motorola, 2003. -Video disabled due to configuration switch 4 -elp-pfm: Copyright (C) Motorola, 2003. -paddle: Copyright (C) Motorola, 2001, present. -RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -PPP Deflate Compression module registered -Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 -ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx -init_alaska_mtd: chip probing count 0 -cfi_cmdset_0001: Erase suspend on write enabled -Using buffer write method -init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes -ALASKA flash0: Using Static image partition definition -Creating 3 MTD partitions on "ALASKA0": -0x00000000-0x00280000 : "kernel" -0x00280000-0x00fe0000 : "user" -0x00fe0000-0x01000000 : "signature" -mgt_fec_module_init -mgt_fec_init() -mgt_fec_init -mgt_init_fec_dev(0xc05f6000,0) -dev c05f6000 fec_priv c05f6160 fec f0009000 -mgt_init_fec_dev(0xc05f6800,1) -dev c05f6800 fec_priv c05f6960 fec f0009800 -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 2048 buckets, 16Kbytes -TCP: Hash tables configured (established 16384 bind 32768) -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -RAMDISK: Compressed image found at block 0 -Freeing initrd memory: 1845k freed -JFFS: Trying to mount a non-mtd device. -VFS: Mounted root (romfs filesystem) readonly. -Freeing unused kernel memory: 228k init -INIT: version 2.78 booting -INIT: Entering runlevel: 1 -"Space, a great big place of unknown stuff." -Dexter, for our MotD. -[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3 -[01/Jan/1970:00:00:01 +0000] boa: server built Sep 7 2004 at 17:40:55. -[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80 -Mounting flash filesystem, will take a minute... -/etc/rc: line 30: /dev/lp0: No such devish-2.05b# -sh-2.05b# ifup eth0 -client (v0.9.9-pre) started -adapter index 2 -adapter hardware address 00:e0:0c:bc:e0:60 -execle'ing /usr/share/udhcpc/default.script -/sbin/ifconfig eth0 -eth0 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:60 - BROADCAST MULTICAST MTU:1500 Metric:1 - mgt_fec_open - Rfec request irq -X fec_open: rcv_ring_size 8, xmt_ring_size 8 -packmgt_fec_open(): call netif_start_queue() -ets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:100 - RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) - Base address:0x9000 - -/sbin/ifconfig eth0 up -entering raw listen mode -Opening raw socket on ifindex 2 -adding option 0x35 -adding option 0x3d -adding option 0x3c -Sending discover... -Waiting on select... -unrelated/bogus packet -Waiting on select... -oooooh!!! got some! -adding option 0x35 -adding option 0x3d -adding option 0x3c -adding option 0x32 -adding option 0x36 -Sending select for 163.12.48.146... -Waiting on select... -oooooh!!! got some! -Waiting on select... -oooooh!!! got some! -Lease of 163.12.48.146 obtained, lease time 345600 -execle'ing /usr/share/udhcpc/default.script -/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0 -/sbin/ifconfig eth0 up -deleting routers -/sbin/route del default -/sbin/route add default gw 163.12.49.254 dev eth0 -adding dns 163.12.252.230 -adding dns 192.55.22.4 -adding dns 192.5.249.4 -entering none listen mode -sh-2.05b# - -5. REPROGRAM U-BOOT -=================== -5.1 Reprogram u-boot (boot from AMD) - 1. Unprotect the boot sector - => protect off bank 3 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfff00000 0xfff6ffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfff00000 - 5. Reset for the new u-boot to take place - => reset - -5.2 Reprogram u-boot (boot from AMD program at INTEL) - 1. Unprotect the boot sector - => protect off bank 2 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfef00000 0xfefdffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfef00000 - 5. Reset for the new u-boot to take place - => reset - -5.3 Reprogram u-boot (boot from INTEL) - 1. Unprotect the boot sector - => protect off bank 4 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfff00000 0xfffdffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfff00000 - 5. Reset for the new u-boot to take place - => reset - -5.4 Reprogram u-boot (boot from INTEL program at AMD) - 1. Unprotect the boot sector - => protect off bank 1 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfe080000 0xfe0effff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfe080000 - 5. Reset for the new u-boot to take place - => reset |