1 files changed, 0 insertions, 74 deletions
diff --git a/doc/README-x86 b/doc/README-x86
deleted file mode 100644
index e8c2fc9..0000000
--- a/doc/README-x86
+++ /dev/null
@@ -1,74 +0,0 @@
-This is my attempt to port U-Boot to the x86 platform. This
-work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
-
-It is currently capable of booting a linux bzImage from flash on
-the AMD SC520 CDP platform.
-
-It was originally based on PPCBoot taken from the CVS October 28 2002.
-
-To compile:
-
-1) Unpack the source tree, either from the complete tarball or
-   from the virgin snapshot + the patch
-
-2) Configure the source
-   $ make sc520_cdp_comfig
-   $ make
-
-To use this code on the CDP:
-1) Make a suitable kernel, I used 2.4.19 with the mtd-support updated
-   from the MTD CVS and a patch to allow root=/dev/mtdblock1 which I
-   included at the end of this file.
-   The following options in the MTD section might be useful:
-
-   CONFIG_MTD_PHYSMAP=y
-   CONFIG_MTD_PHYSMAP_START=38100000
-   CONFIG_MTD_PHYSMAP_LEN=7a0000
-   CONFIG_MTD_PHYSMAP_BUSWIDTH=2
-
-
-2) Program it in to the CDP flashbank with remon
-   u-boot.bin should be programmed att offset 0x7e000 and the kernel at
-   offset 0. If you want to use a jffs2 root file system (not included here),
-   it should be  programmed to offset 0x100000.
-
-   remon> z
-   remon> yi
-   remon> ns u-boot.bin 7e0000
-   remon> ns bzImage 0
-   remon> ns image.jffs2 100000
-
-3) Connect a terminal to the 25pin serial port at 9600bps, and start the CDP.
-
-   remon> z
-   remon> g
-
-4) U-Boot should output some message and a prompt on the terminal, to
-   start the kernel issue the following command:
-
-   BOOT> bootm
-
-5) The kernel should boot, and mount the root filesystem if present.
-
-We hope you find this stuff useful
-Daniel Engström, Omicron Ceti AB, daniel@omicron.se
-
-
---- linux-2.4.19-orig/init/do_mounts.c	Sat Aug  3 02:39:46 2002
-+++ linux-2.4.19/init/do_mounts.c	Mon Sep 23 16:21:33 2002
-@@ -224,6 +224,14 @@
-	{ "ftlc", 0x2c10 },
-	{ "ftld", 0x2c18 },
-	{ "mtdblock", 0x1f00 },
-+	{ "mtdblock0", 0x1f00 },
-+	{ "mtdblock1", 0x1f01 },
-+	{ "mtdblock2", 0x1f02 },
-+	{ "mtdblock3", 0x1f03 },
-+	{ "mtdblock4", 0x1f04 },
-+	{ "mtdblock5", 0x1f05 },
-+	{ "mtdblock6", 0x1f06 },
-+	{ "mtdblock7", 0x1f07 },
-	{ NULL, 0 }
- };
-
--------------------