diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/mpc5xx/start.S | 2 | ||||
| -rw-r--r-- | cpu/mpc8260/start.S | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr.c | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/cpu_init.c | 4 |
5 files changed, 10 insertions, 8 deletions
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S index 9572837..0637003 100644 --- a/cpu/mpc5xx/start.S +++ b/cpu/mpc5xx/start.S @@ -155,7 +155,7 @@ in_flash: /* Initialize some SPRs that are hard to access from C */ /*----------------------------------------------------------------------*/ - lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ + lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ lis r2, CFG_INIT_SP_ADDR@h ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */ /* Note: R0 is still 0 here */ diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index bc55b58..7f5dc81 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -676,13 +676,13 @@ init_debug: bdnz 1b /* Load the Instruction Address Breakpoint Register (IABR). */ - /* */ + /* */ /* The address to load is stored in the first word of dual port */ /* ram and should be preserved while the power is on, so you */ /* can plug addresses into that location then reset the cpu and */ /* this code will load that address into the IABR after the */ /* reset. */ - /* */ + /* */ /* When the program counter matches the contents of the IABR, */ /* an exception is generated (before the instruction at that */ /* location completes). The vector for this exception is 0x1300 */ diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index fe7bbab..e24cd81 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -1340,14 +1340,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, */ cr |= SDRAM_BXCR_SDBE; - for (i = 0; i < num_banks; i++) { + for (i = 0; i < num_banks; i++) { bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = (4 << 20) * bank_size_id; bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", dimm_num, i, ctrl_bank_num[dimm_num]+i, bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); - } + } } } diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 874cec0..b5c0f53 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -58,8 +58,8 @@ #define SDRAM_DDR2 2 #define SDRAM_NONE 0 -#define MAXDIMMS 2 -#define MAXRANKS 4 +#define MAXDIMMS 2 +#define MAXRANKS 4 #define MAXBXCF 4 #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 66e8637..351da36 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -153,7 +153,7 @@ cpu_init_f (void) */ asm volatile(" bl 0f" ::: "lr"); asm volatile("0: mflr 3" ::: "r3"); - asm volatile(" addi 4, 0, 14" ::: "r4"); + asm volatile(" addi 4, 0, 14" ::: "r4"); asm volatile(" mtctr 4" ::: "ctr"); asm volatile("1: icbt 0, 3"); asm volatile(" addi 3, 3, 32" ::: "r3"); @@ -211,6 +211,8 @@ cpu_init_f (void) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ +#elif defined(CONFIG_440EPX) + val |= 0xb0000000; /* generate system reset after 1.34 seconds */ #else val |= 0xf0000000; /* generate system reset after 2.684 seconds */ #endif |