diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/mpc83xx/spd_sdram.c | 130 |
1 files changed, 108 insertions, 22 deletions
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 63dcd66..06a7da8 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -63,12 +63,16 @@ picos_to_clk(int picos) return clks; } -unsigned int -banksize(unsigned char row_dens) +unsigned int banksize(unsigned char row_dens) { return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24; } +int read_spd(uint addr) +{ + return ((int) addr); +} + long int spd_sdram(int(read_spd)(uint addr)) { volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; @@ -84,7 +88,7 @@ long int spd_sdram(int(read_spd)(uint addr)) #warning Current spd_sdram does not fit its usage... adjust implementation or API... CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); - + if (spd.nrows > 2) { puts("DDR:Only two chip selects are supported on ADS.\n"); return 0; @@ -282,8 +286,13 @@ long int spd_sdram(int(read_spd)(uint addr)) */ #if defined(CONFIG_DDR_ECC) if (spd.config == 0x02) { - ddr->err_disable = 0x0000000d; - ddr->err_sbe = 0x00ff0000; + /* disable error detection */ + ddr->err_disable = ~ECC_ERROR_ENABLE; + + /* set single bit error threshold to maximum value, + * reset counter to zero */ + ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) | + (0 << ECC_ERROR_MAN_SBEC_SHIFT); } debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); @@ -297,7 +306,8 @@ long int spd_sdram(int(read_spd)(uint addr)) * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM * clock cycle after address/command */ - ddr->sdram_clk_cntl = 0x82000000; + /*ddr->sdram_clk_cntl = 0x82000000;*/ + ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05); /* * Figure out the settings for the sdram_cfg register. Build up @@ -324,7 +334,7 @@ long int spd_sdram(int(read_spd)(uint addr)) * If the user wanted ECC (enabled via sdram_cfg[2]) */ if (spd.config == 0x02) { - tmp |= 0x20000000; + tmp |= SDRAM_CFG_ECC_EN; } #endif @@ -348,29 +358,87 @@ long int spd_sdram(int(read_spd)(uint addr)) #if defined(CONFIG_DDR_ECC) /* - * Initialize all of memory for ECC, then enable errors. + * Use timebase counter, get_timer() is not availabe + * at this point of initialization yet. */ +static __inline__ unsigned long get_tbms (void) +{ + unsigned long tbl; + unsigned long tbu1, tbu2; + unsigned long ms; + unsigned long long tmp; + + ulong tbclk = get_tbclk(); + + /* get the timebase ticks */ + do { + asm volatile ("mftbu %0":"=r" (tbu1):); + asm volatile ("mftb %0":"=r" (tbl):); + asm volatile ("mftbu %0":"=r" (tbu2):); + } while (tbu1 != tbu2); + + /* convert ticks to ms */ + tmp = (unsigned long long)(tbu1); + tmp = (tmp << 32); + tmp += (unsigned long long)(tbl); + ms = tmp/(tbclk/1000); + + return ms; +} -void -ddr_enable_ecc(unsigned int dram_size) +/* + * Initialize all of memory for ECC, then enable errors. + */ +//#define CONFIG_DDR_ECC_INIT_VIA_DMA +void ddr_enable_ecc(unsigned int dram_size) { -#ifndef FIXME - uint *p = 0; - uint i = 0; + uint *p; volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + volatile ddr8349_t *ddr = &immap->ddr; + unsigned long t_start, t_end; +#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) + uint i; +#endif + debug("Initialize a Cachline in DRAM\n"); + icache_enable(); + +#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) + /* Initialise DMA for direct Transfers */ dma_init(); +#endif - for (*p = 0; p < (uint *)(8 * 1024); p++) { + t_start = get_tbms(); + +#if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA) + debug("DDR init: Cache flush method\n"); + for (p = 0; p < (uint *)(dram_size); p++) { if (((unsigned int)p & 0x1f) == 0) { ppcDcbz((unsigned long) p); } + + /* write pattern to cache and flush */ *p = (unsigned int)0xdeadbeef; + if (((unsigned int)p & 0x1c) == 0x1c) { ppcDcbf((unsigned long) p); } } +#else + printf("DDR init: DMA method\n"); + for (p = 0; p < (uint *)(8 * 1024); p++) { + /* zero one data cache line */ + if (((unsigned int)p & 0x1f) == 0) { + ppcDcbz((unsigned long)p); + } + + /* write pattern to it and flush */ + *p = (unsigned int)0xdeadbeef; + + if (((unsigned int)p & 0x1c) == 0x1c) { + ppcDcbf((unsigned long)p); + } + } /* 8K */ dma_xfer((uint *)0x2000, 0x2000, (uint *)0); @@ -396,13 +464,31 @@ ddr_enable_ecc(unsigned int dram_size) for (i = 1; i < dram_size / 0x800000; i++) { dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); } - - /* - * Enable errors for ECC. - */ - ddr->err_disable = 0x00000000; - asm("sync;isync"); #endif -} + t_end = get_tbms(); + icache_disable(); + + debug("\nREADY!!\n"); + debug("ddr init duration: %ld ms\n", t_end - t_start); + + /* Clear All ECC Errors */ + if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME) + ddr->err_detect |= ECC_ERROR_DETECT_MME; + if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE) + ddr->err_detect |= ECC_ERROR_DETECT_MBE; + if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE) + ddr->err_detect |= ECC_ERROR_DETECT_SBE; + if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE) + ddr->err_detect |= ECC_ERROR_DETECT_MSE; + + /* Disable ECC-Interrupts */ + ddr->err_int_en &= ECC_ERR_INT_DISABLE; + + /* Enable errors for ECC */ + ddr->err_disable &= ECC_ERROR_ENABLE; + + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); +} #endif /* CONFIG_DDR_ECC */ |