diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/mpc85xx/release.S | 38 | ||||
| -rw-r--r-- | cpu/mpc85xx/start.S | 38 | ||||
| -rw-r--r-- | cpu/mpc86xx/cpu.c | 36 | ||||
| -rw-r--r-- | cpu/mpc86xx/cpu_init.c | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/i2c.c | 5 |
5 files changed, 106 insertions, 15 deletions
diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 00c4c54..dab784e 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -70,18 +70,40 @@ __secondary_start_page: mttbu r3 /* Enable/invalidate the I-Cache */ - mfspr r0,SPRN_L1CSR1 - ori r0,r0,(L1CSR1_ICFI|L1CSR1_ICE) - mtspr SPRN_L1CSR1,r0 + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 isync +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b /* Enable/invalidate the D-Cache */ - mfspr r0,SPRN_L1CSR0 - ori r0,r0,(L1CSR0_DCFI|L1CSR0_DCE) - msync - isync - mtspr SPRN_L1CSR0,r0 + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 isync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b #define toreset(x) (x - __secondary_start_page + 0xfffff000) diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 386fa81..af18c1c 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -108,13 +108,41 @@ _start_e500: mtspr L1CSR2,r2 #endif - lis r2,L1CSR0_CPE@H /* enable parity */ - ori r2,r2,L1CSR0_DCE - mtspr L1CSR0,r2 /* enable L1 Dcache */ + /* Enable/invalidate the I-Cache */ + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 isync - mtspr L1CSR1,r2 /* enable L1 Icache */ +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b + + /* Enable/invalidate the D-Cache */ + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 isync - msync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b /* Setup interrupt vectors */ lis r1,TEXT_BASE@h diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index f7e012d..1887575 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2006,2009 Freescale Semiconductor, Inc. + * Copyright 2006,2009-2010 Freescale Semiconductor, Inc. * Jeff Brown * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -197,3 +197,37 @@ void mpc86xx_reginfo(void) printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7)); } + +/* + * Set the DDR BATs to reflect the actual size of DDR. + * + * dram_size is the actual size of DDR, in bytes + * + * Note: we assume that CONFIG_MAX_MEM_MAPPED is 2G or smaller as we only + * are using a single BAT to cover DDR. + * + * If this is not true, (e.g. CONFIG_MAX_MEM_MAPPED is 2GB but HID0_XBSEN + * is not defined) then we might have a situation where U-Boot will attempt + * to relocated itself outside of the region mapped by DBAT0. + * This will cause a machine check. + * + * Currently we are limited to power of two sized DDR since we only use a + * single bat. If a non-power of two size is used that is less than + * CONFIG_MAX_MEM_MAPPED u-boot will crash. + * + */ +void setup_ddr_bat(phys_addr_t dram_size) +{ + unsigned long batu, bl; + + bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED)); + + if (BATU_SIZE(bl) != dram_size) { + u64 sz = (u64)dram_size - BATU_SIZE(bl); + print_size(sz, " left unmapped\n"); + } + + batu = bl | BATU_VS | BATU_VP; + write_bat(DBAT0, batu, CONFIG_SYS_DBAT0L); + write_bat(IBAT0, batu, CONFIG_SYS_IBAT0L); +} diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c index 5a78a9c..b4f047d 100644 --- a/cpu/mpc86xx/cpu_init.c +++ b/cpu/mpc86xx/cpu_init.c @@ -138,8 +138,12 @@ int cpu_init_r(void) /* Set up BAT registers */ void setup_bats(void) { +#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L) write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L); +#endif +#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L) write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L); +#endif write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L); write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L); write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L); diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 7976e75..9b86187 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -93,7 +93,7 @@ static void _i2c_bus_reset(void) void i2c_init(int speed, int slaveaddr) { - struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; + struct ppc4xx_i2c *i2c; int val, divisor; int bus; @@ -109,6 +109,9 @@ void i2c_init(int speed, int slaveaddr) for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) { I2C_SET_BUS(bus); + /* Set i2c pointer after calling I2C_SET_BUS() */ + i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; + /* Handle possible failed I2C state */ /* FIXME: put this into i2c_init_board()? */ _i2c_bus_reset(); |