diff options
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/ixp/npe/Makefile | 2 | ||||
-rw-r--r-- | cpu/mpc86xx/cpu.c | 24 | ||||
-rw-r--r-- | cpu/mpc86xx/spd_sdram.c | 28 | ||||
-rw-r--r-- | cpu/mpc86xx/start.S | 42 |
4 files changed, 69 insertions, 27 deletions
diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile index 4de34fd..7f020b5 100644 --- a/cpu/ixp/npe/Makefile +++ b/cpu/ixp/npe/Makefile @@ -87,7 +87,7 @@ START := $(addprefix $(obj),$(START)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 84f5bef..a33acfe 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -280,22 +280,38 @@ ft_cpu_setup(void *blob, bd_t *bd) #if defined(CONFIG_MPC86XX_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); - memcpy(p, bd->bi_enetaddr, 6); + if (p != NULL) + memcpy(p, bd->bi_enetaddr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enetaddr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); - memcpy(p, bd->bi_enet1addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet1addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet1addr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC3) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); - memcpy(p, bd->bi_enet2addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet2addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet2addr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC4) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); - memcpy(p, bd->bi_enet3addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet3addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet3addr, 6); #endif } diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index ac9ff81..f37ab43 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -51,20 +51,32 @@ extern int dma_xfer(void *dest, uint count, void *src); #define CFG_SUPER_BANK_INTERLEAVING 0 /* - * Convert picoseconds into clock cycles (rounding up if needed). + * Convert picoseconds into DRAM clock cycles (rounding up if needed). */ -int -picos_to_clk(int picos) +static unsigned int +picos_to_clk(unsigned int picos) { - int clks; - - clks = picos / (2000000000 / (get_bus_freq(0) / 1000)); - if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) { + /* use unsigned long long to avoid rounding errors */ + const unsigned long long ULL_2e12 = 2000000000000ULL; + unsigned long long clks; + unsigned long long clks_temp; + + if (! picos) + return 0; + + clks = get_bus_freq(0) * (unsigned long long) picos; + clks_temp = clks; + clks = clks / ULL_2e12; + if (clks_temp % ULL_2e12) { clks++; } - return clks; + if (clks > 0xFFFFFFFFULL) { + clks = 0xFFFFFFFFULL; + } + + return (unsigned int) clks; } diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 7406fe2..67c56db 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -241,26 +241,40 @@ in_flash: bl setup_ccsrbar #endif - /* Fix for SMP linux - Changing arbitration to round-robin */ - lis r3, CFG_CCSRBAR@h - ori r3, r3, 0x1000 - xor r4, r4, r4 - li r4, 0x1000 - stw r4, 0(r3) - /* setup the law entries */ - bl law_entry + /* -- MPC8641 Rev 1.0 MCM Errata fixups -- */ + + /* skip fixups if not Rev 1.0 */ + mfspr r4, SVR + rlwinm r4,r4,0,24,31 + cmpwi r4,0x10 + bne 1f + + lis r3,MCM_ABCR@ha + lwz r4,MCM_ABCR@l(r3) /* ABCR -> r4 */ + + /* set ABCR[A_STRM_CNT] = 0 */ + rlwinm r4,r4,0,0,29 + + /* set ABCR[ARB_POLICY] to 0x1 (round-robin) */ + addi r0,r0,1 + rlwimi r4,r0,12,18,19 + + stw r4,MCM_ABCR@l(r3) /* r4 -> ABCR */ sync - /* Don't use this feature due to bug in 8641D PD4 */ - /* Disable ERD_DIS */ - lis r3, CFG_CCSRBAR@h - ori r3, r3, 0x1008 - lwz r4, 0(r3) + /* Set DBCR[ERD_DIS] */ + lis r3,MCM_DBCR@ha + lwz r4,MCM_DBCR@l(r3) oris r4, r4, 0x4000 - stw r4, 0(r3) + stw r4,MCM_DBCR@l(r3) + sync +1: + /* setup the law entries */ + bl law_entry sync + #if (EMULATOR_RUN == 1) /* On the emulator we want to adjust these ASAP */ /* otherwise things are sloooow */ |