summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/blackfin/Makefile2
-rw-r--r--cpu/blackfin/i2c.c428
2 files changed, 1 insertions, 429 deletions
diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile
index 8fed4b4..b90fb48 100644
--- a/cpu/blackfin/Makefile
+++ b/cpu/blackfin/Makefile
@@ -17,7 +17,7 @@ EXTRA :=
CEXTRA := initcode.o
SEXTRA := start.o
SOBJS := interrupt.o cache.o
-COBJS := cpu.o traps.o interrupts.o reset.o serial.o i2c.o watchdog.o
+COBJS := cpu.o traps.o interrupts.o reset.o serial.o watchdog.o
ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
COBJS += initcode.o
diff --git a/cpu/blackfin/i2c.c b/cpu/blackfin/i2c.c
deleted file mode 100644
index 2a3e223..0000000
--- a/cpu/blackfin/i2c.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * i2c.c - driver for Blackfin on-chip TWI/I2C
- *
- * Copyright (c) 2006-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <asm/blackfin.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/twi.h>
-
-/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
-#ifdef TWI0_CLKDIV
-#define bfin_read_TWI_CLKDIV() bfin_read_TWI0_CLKDIV()
-#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val)
-#define bfin_read_TWI_CONTROL() bfin_read_TWI0_CONTROL()
-#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val)
-#define bfin_read_TWI_SLAVE_CTL() bfin_read_TWI0_SLAVE_CTL()
-#define bfin_write_TWI_SLAVE_CTL(val) bfin_write_TWI0_SLAVE_CTL(val)
-#define bfin_read_TWI_SLAVE_STAT() bfin_read_TWI0_SLAVE_STAT()
-#define bfin_write_TWI_SLAVE_STAT(val) bfin_write_TWI0_SLAVE_STAT(val)
-#define bfin_read_TWI_SLAVE_ADDR() bfin_read_TWI0_SLAVE_ADDR()
-#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write_TWI0_SLAVE_ADDR(val)
-#define bfin_read_TWI_MASTER_CTL() bfin_read_TWI0_MASTER_CTL()
-#define bfin_write_TWI_MASTER_CTL(val) bfin_write_TWI0_MASTER_CTL(val)
-#define bfin_read_TWI_MASTER_STAT() bfin_read_TWI0_MASTER_STAT()
-#define bfin_write_TWI_MASTER_STAT(val) bfin_write_TWI0_MASTER_STAT(val)
-#define bfin_read_TWI_MASTER_ADDR() bfin_read_TWI0_MASTER_ADDR()
-#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val)
-#define bfin_read_TWI_INT_STAT() bfin_read_TWI0_INT_STAT()
-#define bfin_write_TWI_INT_STAT(val) bfin_write_TWI0_INT_STAT(val)
-#define bfin_read_TWI_INT_MASK() bfin_read_TWI0_INT_MASK()
-#define bfin_write_TWI_INT_MASK(val) bfin_write_TWI0_INT_MASK(val)
-#define bfin_read_TWI_FIFO_CTL() bfin_read_TWI0_FIFO_CTL()
-#define bfin_write_TWI_FIFO_CTL(val) bfin_write_TWI0_FIFO_CTL(val)
-#define bfin_read_TWI_FIFO_STAT() bfin_read_TWI0_FIFO_STAT()
-#define bfin_write_TWI_FIFO_STAT(val) bfin_write_TWI0_FIFO_STAT(val)
-#define bfin_read_TWI_XMT_DATA8() bfin_read_TWI0_XMT_DATA8()
-#define bfin_write_TWI_XMT_DATA8(val) bfin_write_TWI0_XMT_DATA8(val)
-#define bfin_read_TWI_XMT_DATA_16() bfin_read_TWI0_XMT_DATA16()
-#define bfin_write_TWI_XMT_DATA16(val) bfin_write_TWI0_XMT_DATA16(val)
-#define bfin_read_TWI_RCV_DATA8() bfin_read_TWI0_RCV_DATA8()
-#define bfin_write_TWI_RCV_DATA8(val) bfin_write_TWI0_RCV_DATA8(val)
-#define bfin_read_TWI_RCV_DATA16() bfin_read_TWI0_RCV_DATA16()
-#define bfin_write_TWI_RCV_DATA16(val) bfin_write_TWI0_RCV_DATA16(val)
-#endif
-
-#ifdef DEBUG_I2C
-#define PRINTD(fmt,args...) do { \
- DECLARE_GLOBAL_DATA_PTR; \
- if (gd->have_console) \
- printf(fmt ,##args); \
- } while (0)
-#else
-#define PRINTD(fmt,args...)
-#endif
-
-#ifndef CONFIG_TWICLK_KHZ
-#define CONFIG_TWICLK_KHZ 50
-#endif
-
-/* All transfers are described by this data structure */
-struct i2c_msg {
- u16 addr; /* slave address */
- u16 flags;
-#define I2C_M_STOP 0x2
-#define I2C_M_RD 0x1
- u16 len; /* msg length */
- u8 *buf; /* pointer to msg data */
-};
-
-/**
- * i2c_reset: - reset the host controller
- */
-static void i2c_reset(void)
-{
- /* Disable TWI */
- bfin_write_TWI_CONTROL(0);
- SSYNC();
-
- /* Set TWI internal clock as 10MHz */
- bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
-
- /* Set Twi interface clock as specified */
- if (CONFIG_TWICLK_KHZ > 400)
- bfin_write_TWI_CLKDIV(((5 * 1024 / 400) << 8) | ((5 * 1024 /
- 400) & 0xFF));
- else
- bfin_write_TWI_CLKDIV(((5 * 1024 /
- CONFIG_TWICLK_KHZ) << 8) | ((5 * 1024 /
- CONFIG_TWICLK_KHZ)
- & 0xFF));
-
- /* Enable TWI */
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
- SSYNC();
-}
-
-int wait_for_completion(struct i2c_msg *msg, int timeout_count)
-{
- unsigned short twi_int_stat;
- unsigned short mast_stat;
- int i;
-
- for (i = 0; i < timeout_count; i++) {
- twi_int_stat = bfin_read_TWI_INT_STAT();
- mast_stat = bfin_read_TWI_MASTER_STAT();
-
- if (XMTSERV & twi_int_stat) {
- /* Transmit next data */
- if (msg->len > 0) {
- bfin_write_TWI_XMT_DATA8(*(msg->buf++));
- msg->len--;
- } else if (msg->flags & I2C_M_STOP)
- bfin_write_TWI_MASTER_CTL
- (bfin_read_TWI_MASTER_CTL() | STOP);
- SSYNC();
- /* Clear status */
- bfin_write_TWI_INT_STAT(XMTSERV);
- SSYNC();
- i = 0;
- }
- if (RCVSERV & twi_int_stat) {
- if (msg->len > 0) {
- /* Receive next data */
- *(msg->buf++) = bfin_read_TWI_RCV_DATA8();
- msg->len--;
- } else if (msg->flags & I2C_M_STOP) {
- bfin_write_TWI_MASTER_CTL
- (bfin_read_TWI_MASTER_CTL() | STOP);
- SSYNC();
- }
- /* Clear interrupt source */
- bfin_write_TWI_INT_STAT(RCVSERV);
- SSYNC();
- i = 0;
- }
- if (MERR & twi_int_stat) {
- bfin_write_TWI_INT_STAT(MERR);
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_STAT(0x3e);
- bfin_write_TWI_MASTER_CTL(0);
- SSYNC();
- /*
- * if both err and complete int stats are set,
- * return proper results.
- */
- if (MCOMP & twi_int_stat) {
- bfin_write_TWI_INT_STAT(MCOMP);
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_CTL(0);
- SSYNC();
- /*
- * If it is a quick transfer,
- * only address bug no data, not an err.
- */
- if (msg->len == 0 && mast_stat & BUFRDERR)
- return 0;
- /*
- * If address not acknowledged return -3,
- * else return 0.
- */
- else if (!(mast_stat & ANAK))
- return 0;
- else
- return -3;
- }
- return -1;
- }
- if (MCOMP & twi_int_stat) {
- bfin_write_TWI_INT_STAT(MCOMP);
- SSYNC();
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_CTL(0);
- SSYNC();
- return 0;
- }
- }
- if (msg->flags & I2C_M_RD)
- return -4;
- else
- return -2;
-}
-
-/**
- * i2c_transfer: - Transfer one byte over the i2c bus
- *
- * This function can tranfer a byte over the i2c bus in both directions.
- * It is used by the public API functions.
- *
- * @return: 0: transfer successful
- * -1: transfer fail
- * -2: transmit timeout
- * -3: ACK missing
- * -4: receive timeout
- * -5: controller not ready
- */
-int i2c_transfer(struct i2c_msg *msg)
-{
- int ret = 0;
- int timeout_count = 10000;
- int len = msg->len;
-
- if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) {
- ret = -5;
- goto transfer_error;
- }
-
- while (bfin_read_TWI_MASTER_STAT() & BUSBUSY)
- continue;
-
- /* Set Transmit device address */
- bfin_write_TWI_MASTER_ADDR(msg->addr);
-
- /*
- * FIFO Initiation.
- * Data in FIFO should be discarded before start a new operation.
- */
- bfin_write_TWI_FIFO_CTL(0x3);
- SSYNC();
- bfin_write_TWI_FIFO_CTL(0);
- SSYNC();
-
- if (!(msg->flags & I2C_M_RD)) {
- /* Transmit first data */
- if (msg->len > 0) {
- PRINTD("1 in i2c_transfer: buf=%d, len=%d\n", *msg->buf,
- len);
- bfin_write_TWI_XMT_DATA8(*(msg->buf++));
- msg->len--;
- SSYNC();
- }
- }
-
- /* clear int stat */
- bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
-
- /* Interrupt mask . Enable XMT, RCV interrupt */
- bfin_write_TWI_INT_MASK(MCOMP | MERR |
- ((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV));
- SSYNC();
-
- if (len > 0 && len <= 255)
- bfin_write_TWI_MASTER_CTL((len << 6));
- else if (msg->len > 255) {
- bfin_write_TWI_MASTER_CTL((0xff << 6));
- msg->flags &= I2C_M_STOP;
- } else
- bfin_write_TWI_MASTER_CTL(0);
-
- /* Master enable */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
- ((msg->flags & I2C_M_RD)
- ? MDIR : 0) | ((CONFIG_TWICLK_KHZ >
- 100) ? FAST : 0));
- SSYNC();
-
- ret = wait_for_completion(msg, timeout_count);
- PRINTD("3 in i2c_transfer: ret=%d\n", ret);
-
- transfer_error:
- switch (ret) {
- case 1:
- PRINTD(("i2c_transfer: error: transfer fail\n"));
- break;
- case 2:
- PRINTD(("i2c_transfer: error: transmit timeout\n"));
- break;
- case 3:
- PRINTD(("i2c_transfer: error: ACK missing\n"));
- break;
- case 4:
- PRINTD(("i2c_transfer: error: receive timeout\n"));
- break;
- case 5:
- PRINTD(("i2c_transfer: error: controller not ready\n"));
- i2c_reset();
- break;
- default:
- break;
- }
- return ret;
-
-}
-
-/* ---------------------------------------------------------------------*/
-/* API Functions */
-/* ---------------------------------------------------------------------*/
-
-void i2c_init(int speed, int slaveaddr)
-{
- i2c_reset();
-}
-
-/**
- * i2c_probe: - Test if a chip answers for a given i2c address
- *
- * @chip: address of the chip which is searched for
- * @return: 0 if a chip was found, -1 otherwhise
- */
-
-int i2c_probe(uchar chip)
-{
- struct i2c_msg msg;
- u8 probebuf;
-
- i2c_reset();
-
- probebuf = 0;
- msg.addr = chip;
- msg.flags = 0;
- msg.len = 1;
- msg.buf = &probebuf;
- if (i2c_transfer(&msg))
- return -1;
-
- msg.addr = chip;
- msg.flags = I2C_M_RD;
- msg.len = 1;
- msg.buf = &probebuf;
- if (i2c_transfer(&msg))
- return -1;
-
- return 0;
-}
-
-/**
- * i2c_read: - Read multiple bytes from an i2c device
- *
- * chip: I2C chip address, range 0..127
- * addr: Memory (register) address within the chip
- * alen: Number of bytes to use for addr (typically 1, 2 for larger
- * memories, 0 for register type devices with only one
- * register)
- * buffer: Where to read/write the data
- * len: How many bytes to read/write
- *
- * Returns: 0 on success, not 0 on failure
- */
-
-int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- struct i2c_msg msg;
- u8 addr_bytes[3]; /* lowest...highest byte of data address */
-
- PRINTD("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x\n", chip,
- addr, alen, len);
-
- if (alen > 0) {
- addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
- addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
- addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
- msg.addr = chip;
- msg.flags = 0;
- msg.len = alen;
- msg.buf = addr_bytes;
- if (i2c_transfer(&msg))
- return -1;
- }
-
- /* start read sequence */
- PRINTD(("i2c_read: start read sequence\n"));
- msg.addr = chip;
- msg.flags = I2C_M_RD;
- msg.len = len;
- msg.buf = buffer;
- if (i2c_transfer(&msg))
- return -1;
-
- return 0;
-}
-
-/**
- * i2c_write: - Write multiple bytes to an i2c device
- *
- * chip: I2C chip address, range 0..127
- * addr: Memory (register) address within the chip
- * alen: Number of bytes to use for addr (typically 1, 2 for larger
- * memories, 0 for register type devices with only one
- * register)
- * buffer: Where to read/write the data
- * len: How many bytes to read/write
- *
- * Returns: 0 on success, not 0 on failure
- */
-
-int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- struct i2c_msg msg;
- u8 addr_bytes[3]; /* lowest...highest byte of data address */
-
- PRINTD
- ("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x, buf0=0x%x\n",
- chip, addr, alen, len, buffer[0]);
-
- /* chip address write */
- if (alen > 0) {
- addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
- addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
- addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
- msg.addr = chip;
- msg.flags = 0;
- msg.len = alen;
- msg.buf = addr_bytes;
- if (i2c_transfer(&msg))
- return -1;
- }
-
- /* start read sequence */
- PRINTD(("i2c_write: start write sequence\n"));
- msg.addr = chip;
- msg.flags = 0;
- msg.len = len;
- msg.buf = buffer;
- if (i2c_transfer(&msg))
- return -1;
-
- return 0;
-
-}
-
-#endif /* CONFIG_HARD_I2C */
generated by cgit v1.1 at 2024-12-20 19:08:25 +0000