diff options
Diffstat (limited to 'cpu')
114 files changed, 3542 insertions, 9182 deletions
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile index d5ac7d3..7701b03 100644 --- a/cpu/arm1136/Makefile +++ b/cpu/arm1136/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = interrupts.o cpu.o +COBJS = cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c index fa78eaa..90e9553 100644 --- a/cpu/arm1136/cpu.c +++ b/cpu/arm1136/cpu.c @@ -33,9 +33,6 @@ #include <common.h> #include <command.h> -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include <asm/arch/omap2420.h> -#endif #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void) unsigned long value; __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); return value; } diff --git a/cpu/bf533/Makefile b/cpu/arm1136/mx31/Makefile index ad48f1c..1fc8eea 100644 --- a/cpu/bf533/Makefile +++ b/cpu/arm1136/mx31/Makefile @@ -1,8 +1,5 @@ -# U-boot - Makefile # -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2006 +# (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -10,43 +7,38 @@ # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of +# published by the Free Software Foundatio; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA # include $(TOPDIR)/config.mk -LIB = $(obj)lib$(CPU).a - -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o +LIB = $(obj)lib$(SOC).a -EXTRA = init_sdram_bootrom_initblock.o +COBJS = interrupts.o serial.o generic.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) +all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) -######################################################################### +####################################################################### +## # defines $(obj).depend target include $(SRCTREE)/rules.mk sinclude $(obj).depend - -######################################################################### diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c new file mode 100644 index 0000000..297d616 --- /dev/null +++ b/cpu/arm1136/mx31/generic.c @@ -0,0 +1,99 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx31-regs.h> + +static u32 mx31_decode_pll(u32 reg, u32 infreq) +{ + u32 mfi = (reg >> 10) & 0xf; + u32 mfn = reg & 0x3f; + u32 mfd = (reg >> 16) & 0x3f; + u32 pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + mfd += 1; + pd += 1; + + return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) / + (mfd * pd)) << 10; +} + +u32 mx31_get_mpl_dpdgck_clk(void) +{ + u32 infreq; + + if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM) + infreq = CONFIG_MX31_CLK32 * 1024; + else + infreq = CONFIG_MX31_HCLK_FREQ; + + return mx31_decode_pll(__REG(CCM_MPCTL), infreq); } + +u32 mx31_get_mcu_main_clk(void) +{ + /* For now we assume mpl_dpdgck_clk == mcu_main_clk + * which should be correct for most boards + */ + return mx31_get_mpl_dpdgck_clk(); +} + +u32 mx31_get_ipg_clk(void) +{ + u32 freq = mx31_get_mcu_main_clk(); + u32 pdr0 = __REG(CCM_PDR0); + + freq /= ((pdr0 >> 3) & 0x7) + 1; + freq /= ((pdr0 >> 6) & 0x3) + 1; + + return freq; +} + +void mx31_dump_clocks(void) +{ + u32 cpufreq = mx31_get_mcu_main_clk(); + printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000); + printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); +} + +void mx31_gpio_mux(unsigned long mode) +{ + unsigned long reg, shift, tmp; + + reg = IOMUXC_BASE + (mode & 0xfc); + shift = (~mode & 0x3) * 8; + + tmp = __REG(reg); + tmp &= ~(0xff << shift); + tmp |= ((mode >> 8) & 0xff) << shift; + __REG(reg) = tmp; +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("CPU: Freescale i.MX31 at %d MHz\n", + mx31_get_mcu_main_clk() / 1000000); + return 0; +} +#endif diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c new file mode 100644 index 0000000..189f601 --- /dev/null +++ b/cpu/arm1136/mx31/interrupts.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/mx31-regs.h> + +#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ + +/* General purpose timers registers */ +#define GPTCR __REG(TIMER_BASE) /* Control register */ +#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */ +#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */ +#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */ + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ + +/* + * nothing really to do with interrupts, just starts up a counter. + */ +int interrupt_init(void) +{ + int i; + + /* setup GP Timer 1 */ + GPTCR = GPTCR_SWR; + for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */ + GPTPR = 0; /* 32Khz */ + /* Freerun Mode, PERCLK1 input */ + GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; + + return 0; +} + +void reset_timer_masked(void) +{ + GPTCR = 0; + /* Freerun Mode, PERCLK1 input*/ + GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN; +} + +ulong get_timer_masked(void) +{ + ulong val = GPTCNT; + return val; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + if (usec >= 1000) { + /* "big" number, spread normalization to seconds */ + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + tmo /= 1000; /* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CFG_HZ; + tmo /= (1000*1000); + } + + tmp = get_timer(0); /* get current timestamp */ + if ((tmo + tmp + 1) < tmp) + /* setting this forward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else + /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo)/* loop till event */ + /*NOP*/; +} + +void reset_cpu(ulong addr) +{ + __REG16(WDOG_BASE) = 4; +} diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c new file mode 100644 index 0000000..f7e1b3b --- /dev/null +++ b/cpu/arm1136/mx31/serial.c @@ -0,0 +1,230 @@ +/* + * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> + +#if defined CONFIG_MX31_UART + +#include <asm/arch/mx31.h> + +#define __REG(x) (*((volatile u32 *)(x))) + +#ifdef CFG_MX31_UART1 +#define UART_PHYS 0x43f90000 +#elif defined(CFG_MX31_UART2) +#define UART_PHYS 0x43f94000 +#elif defined(CFG_MX31_UART3) +#define UART_PHYS 0x5000c000 +#elif defined(CFG_MX31_UART4) +#define UART_PHYS 0x43fb0000 +#elif defined(CFG_MX31_UART5) +#define UART_PHYS 0x43fb4000 +#else +#error "define CFG_MX31_UARTx to use the mx31 UART driver" +#endif + +/* Register definitions */ +#define URXD 0x0 /* Receiver Register */ +#define UTXD 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define UTS 0xb4 /* UART Test Register (mx31) */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +DECLARE_GLOBAL_DATA_PTR; + +void serial_setbrg(void) +{ + u32 clk = mx31_get_ipg_clk(); + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + __REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */ + __REG(UART_PHYS + UBIR) = 0xf; + __REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate); + +} + +int serial_getc(void) +{ + while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); + return __REG(UART_PHYS + URXD); +} + +void serial_putc(const char c) +{ + __REG(UART_PHYS + UTXD) = c; + + /* wait for transmitter to be ready */ + while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY)); + + /* If \n, also do \r */ + if (c == '\n') + serial_putc('\r'); +} + +/* + * Test whether a character is in the RX buffer */ +int serial_tstc(void) +{ + /* If receive fifo is empty, return false */ + if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY) + return 0; + return 1; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init(void) +{ + __REG(UART_PHYS + UCR1) = 0x0; + __REG(UART_PHYS + UCR2) = 0x0; + + while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST)); + + __REG(UART_PHYS + UCR3) = 0x0704; + __REG(UART_PHYS + UCR4) = 0x8000; + __REG(UART_PHYS + UESC) = 0x002b; + __REG(UART_PHYS + UTIM) = 0x0; + + __REG(UART_PHYS + UTS) = 0x0; + + serial_setbrg(); + + __REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \ + UCR2_TXEN | UCR2_SRST; + + __REG(UART_PHYS + UCR1) = UCR1_UARTEN; + + return 0; +} + + +#endif /* CONFIG_MX31 */ diff --git a/cpu/bf561/Makefile b/cpu/arm1136/omap24xx/Makefile index 418a437..39b0a82 100644 --- a/cpu/bf561/Makefile +++ b/cpu/arm1136/omap24xx/Makefile @@ -1,8 +1,5 @@ -# U-boot - Makefile # -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 +# (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -10,34 +7,31 @@ # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of +# published by the Free Software Foundatio; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA # include $(TOPDIR)/config.mk -LIB = $(obj)lib$(CPU).a - -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o +LIB = $(obj)lib$(SOC).a -EXTRA = init_sdram_bootrom_initblock.o +COBJS = interrupts.o +SOBJS = start.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) +all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c index 491c902..8503b24 100644..100755 --- a/cpu/arm1136/interrupts.c +++ b/cpu/arm1136/omap24xx/interrupts.c @@ -32,31 +32,28 @@ #include <common.h> #include <asm/arch/bits.h> - -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -# include <asm/arch/omap2420.h> -#endif +#include <asm/arch/omap2420.h> #define TIMER_LOAD_VAL 0 /* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR)) - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp.c */ -#else +#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR))) static ulong timestamp; static ulong lastinc; -/* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init (void) +/* + * nothing really to do with interrupts, just starts up a counter. + */ +int interrupt_init(void) { int32_t val; /* Start the counter ticking up */ - *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/ - val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/ + /* reload value on overflow*/ + *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; + /* mask to enable timer*/ + val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ reset_timer_masked(); /* init the timestamp and lastinc value */ @@ -66,82 +63,99 @@ int interrupt_init (void) /* * timer without interrupts */ -void reset_timer (void) +void reset_timer(void) { - reset_timer_masked (); + reset_timer_masked(); } -ulong get_timer (ulong base) +ulong get_timer(ulong base) { - return get_timer_masked () - base; + return get_timer_masked() - base; } -void set_timer (ulong t) +void set_timer(ulong t) { timestamp = t; } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void udelay(unsigned long usec) { ulong tmo, tmp; - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + /* finish normalize. */ + tmo /= 1000; + } else { + /* else small number, don't kill it prior to HZ multiply */ tmo = usec * CFG_HZ; tmo /= (1000*1000); } - - tmp = get_timer (0); /* get current timestamp */ - if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */ - reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */ + /* get current timestamp */ + tmp = get_timer(0); + if ((tmo + tmp + 1) < tmp) + /* setting this forward will roll time stamp */ + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); else - tmo += tmp; /* else, set advancing stamp wake up time */ - while (get_timer_masked () < tmo)/* loop till event */ + /* else, set advancing stamp wake up time */ + tmo += tmp; + while (get_timer_masked() < tmo)/* loop till event */ /*NOP*/; } -void reset_timer_masked (void) +void reset_timer_masked(void) { /* reset time */ - lastinc = READ_TIMER; /* capture current incrementer value time */ - timestamp = 0; /* start "advancing" time stamp from 0 */ + /* capture current incrementer value time */ + lastinc = READ_TIMER; + /* start "advancing" time stamp from 0 */ + timestamp = 0; } -ulong get_timer_masked (void) +ulong get_timer_masked(void) { - ulong now = READ_TIMER; /* current tick value */ + ulong now = READ_TIMER; /* current tick value */ - if (now >= lastinc) /* normal mode (non roll) */ - timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ - else /* we have rollover of incrementer */ + /* normal mode (non roll) */ + if (now >= lastinc) + /* move stamp forward with absolute diff ticks */ + timestamp += (now - lastinc); + else + /* we have rollover of incrementer */ timestamp += (0xFFFFFFFF - lastinc) + now; lastinc = now; return timestamp; } /* waits specified delay value and resets timestamp */ -void udelay_masked (unsigned long usec) +void udelay_masked(unsigned long usec) { ulong tmo; ulong endtime; signed long diff; - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ + if (usec >= 1000) { + /* "big" number, spread normalization to seconds */ + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CFG_HZ; + tmo /= 1000;/* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ tmo = usec * CFG_HZ; tmo /= (1000*1000); } - endtime = get_timer_masked () + tmo; + endtime = get_timer_masked() + tmo; do { - ulong now = get_timer_masked (); + ulong now = get_timer_masked(); diff = endtime - now; } while (diff >= 0); } @@ -158,10 +172,9 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On ARM it returns the number of timer ticks per second. */ -ulong get_tbclk (void) +ulong get_tbclk(void) { ulong tbclk; tbclk = CFG_HZ; return tbclk; } -#endif /* !Integrator/CP */ diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S new file mode 100644 index 0000000..5634312 --- /dev/null +++ b/cpu/arm1136/omap24xx/start.S @@ -0,0 +1,42 @@ +/* + * armboot - Startup Code for OMP2420/ARM1136 CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> + * + * Copyright (c) 2001 Marius Gr??ger <mag@sysgo.de> + * Copyright (c) 2002 Alex Z??pke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/omap2420.h> + +.globl reset_cpu +reset_cpu: + ldr r1, rstctl /* get addr for global reset reg */ + mov r3, #0x2 /* full reset pll+mpu */ + str r3, [r1] /* force reset */ + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PM_RSTCTRL_WKUP diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S index 8b765f1..56009d0 100644 --- a/cpu/arm1136/start.S +++ b/cpu/arm1136/start.S @@ -30,9 +30,6 @@ #include <config.h> #include <version.h> -#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) -#include <asm/arch/omap2420.h> -#endif .globl _start _start: b reset #ifdef CONFIG_ONENAND_IPL @@ -438,22 +435,4 @@ fiq: arm1136_cache_flush: mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache mov pc, lr @ back to caller - -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) -/* Use the IntegratorCP function from board/integratorcp/platform.S */ -#else - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl /* get addr for global reset reg */ - mov r3, #0x2 /* full reset pll+mpu */ - str r3, [r1] /* force reset */ - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PM_RSTCTRL_WKUP - -#endif #endif /* CONFIG_ONENAND_IPL */ diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 1902bd0..98363eb 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -46,7 +46,7 @@ #define MC_ASR 0xFFFFFF04 #define MC_AASR 0xFFFFFF08 #define EBI_CFGR 0xFFFFFF64 -#define SMC2_CSR 0xFFFFFF70 +#define SMC_CSR0 0xFFFFFF70 /* clocks */ #define PLLAR 0xFFFFFC28 @@ -146,8 +146,8 @@ SMRDATA: .word MC_AASR_VAL .word EBI_CFGR .word EBI_CFGR_VAL - .word SMC2_CSR - .word SMC2_CSR_VAL + .word SMC_CSR0 + .word SMC_CSR0_VAL .word PLLAR .word PLLAR_VAL .word PLLBR diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91cap9/spi.c deleted file mode 100644 index 0953820..0000000 --- a/cpu/arm926ejs/at91cap9/spi.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Driver for ATMEL DataFlash support - * Author : Hamid Ikdoumi (Atmel) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <config.h> -#include <common.h> -#include <asm/hardware.h> - -#ifdef CONFIG_HAS_DATAFLASH -#include <dataflash.h> - -/* Max Value = 10MHz to be compliant to the Continuous Array Read function */ -#define AT91C_SPI_CLK 10000000 - -/* AC Characteristics: DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xFA << 16) -#define DATAFLASH_TCHS (0x8 << 24) - -#define AT91C_TIMEOUT_WRDY 200000 -#define AT91C_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ - -void AT91F_SpiInit(void) -{ - /* Reset the SPI */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SWRST; - - /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI0->SPI_MR = - AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; - - /* Configure CS0 */ - AT91C_BASE_SPI0->SPI_CSR[0] = - AT91C_SPI_CPOL | - (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -} - -void AT91F_SpiEnable(int cs) -{ - switch (cs) { - case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS0_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - case 3: - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - } - - /* SPI_Enable */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SPIEN; -} - -unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -{ - unsigned int timeout; - - pDesc->state = BUSY; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI0->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt; - AT91C_BASE_SPI0->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt; - - /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI0->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI0->SPI_TCR = pDesc->tx_cmd_size; - - if (pDesc->tx_data_size != 0) { - /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI0->SPI_RNPR = (unsigned int)pDesc->rx_data_pt; - AT91C_BASE_SPI0->SPI_TNPR = (unsigned int)pDesc->tx_data_pt; - - /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI0->SPI_RNCR = pDesc->rx_data_size; - AT91C_BASE_SPI0->SPI_TNCR = pDesc->tx_data_size; - } - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - timeout = 0; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while (!(AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - pDesc->state = IDLE; - - if (timeout >= CFG_SPI_WRITE_TOUT) { - printf("Error Timeout\n\r"); - return DATAFLASH_ERROR; - } - - return DATAFLASH_OK; -} -#endif diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile index bf15e1e..203abc2 100644 --- a/cpu/arm926ejs/at91cap9/Makefile +++ b/cpu/arm926ejs/at91sam9/Makefile @@ -25,11 +25,14 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = ether.o timer.o spi.o usb.o +COBJS-y += ether.o +COBJS-y += timer.o +COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o +COBJS-y += usb.o SOBJS = lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) all: $(obj).depend $(LIB) diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk index ca2cae1..ca2cae1 100644 --- a/cpu/arm926ejs/at91cap9/config.mk +++ b/cpu/arm926ejs/at91sam9/config.mk diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c index b7958d5..e4f5601 100644 --- a/cpu/arm926ejs/at91cap9/ether.c +++ b/cpu/arm926ejs/at91sam9/ether.c @@ -23,13 +23,13 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/hardware.h> extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -void at91cap9_eth_initialize(bd_t *bi) +void at91sam9_eth_initialize(bd_t *bi) { - macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00); + macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); } #endif diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S index 24d950c..40a3f6a 100644 --- a/cpu/arm926ejs/at91cap9/lowlevel_init.S +++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * AT91CAP9 setup stuff + * AT91CAP9/SAM9 setup stuff * * (C) Copyright 2007-2008 * Stelian Pop <stelian.pop <at> leadtechdesign.com> diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c new file mode 100644 index 0000000..c9fe6d8 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/spi.c @@ -0,0 +1,157 @@ +/* + * Driver for ATMEL DataFlash support + * Author : Hamid Ikdoumi (Atmel) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_spi.h> + +#include <dataflash.h> + +#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ +#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ +#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ + +void AT91F_SpiInit(void) +{ + /* Reset the SPI */ + writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); + + /* Configure SPI in Master Mode with No CS selected !!! */ + writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, + AT91_BASE_SPI + AT91_SPI_MR); + + /* Configure CS0 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(0)); + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 + /* Configure CS1 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(1)); +#endif + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 + /* Configure CS3 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(3)); +#endif + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + + /* + * Add tempo to get SPI in a safe state. + * Should not be needed for new silicon (Rev B) + */ + udelay(500000); + readl(AT91_BASE_SPI + AT91_SPI_SR); + readl(AT91_BASE_SPI + AT91_SPI_RDR); + +} + +void AT91F_SpiEnable(int cs) +{ + unsigned long mode; + + switch (cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 3: + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + } + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); +} + +unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); + +unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) +{ + unsigned int timeout; + + pDesc->state = BUSY; + + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + + /* Initialize the Transmit and Receive Pointer */ + writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); + + /* Intialize the Transmit and Receive Counters */ + writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); + + if (pDesc->tx_data_size != 0) { + /* Initialize the Next Transmit and Next Receive Pointer */ + writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); + + /* Intialize the Next Transmit and Next Receive Counters */ + writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); + } + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + timeout = 0; + + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && + ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + pDesc->state = IDLE; + + if (timeout >= CFG_SPI_WRITE_TOUT) { + printf("Error Timeout\n\r"); + return DATAFLASH_ERROR; + } + + return DATAFLASH_OK; +} diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c index 4110e15..4e79466 100644 --- a/cpu/arm926ejs/at91cap9/timer.c +++ b/cpu/arm926ejs/at91sam9/timer.c @@ -24,36 +24,35 @@ #include <common.h> #include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/io.h> /* - * We're using the AT91CAP9 PITC in 32 bit mode, by + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by * setting the 20 bit counter period to its maximum (0xfffff). */ #define TIMER_LOAD_VAL 0xfffff -#define READ_RESET_TIMER (AT91C_BASE_PITC->PITC_PIVR) -#define READ_TIMER (AT91C_BASE_PITC->PITC_PIIR) +#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) +#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) #define TIMER_FREQ (AT91C_MASTER_CLOCK << 4) #define TICKS_TO_USEC(ticks) ((ticks) / 6) ulong get_timer_masked(void); ulong resettime; -AT91PS_PITC p_pitc; - /* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init(void) +int timer_init(void) { /* * Enable PITC Clock * The clock is already enabled for system controller in boot */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); /* Enable PITC */ - AT91C_BASE_PITC->PITC_PIMR = AT91C_PITC_PITEN; - - /* Load PITC_PIMR with the right timer value */ - AT91C_BASE_PITC->PITC_PIMR |= TIMER_LOAD_VAL; + at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); reset_timer_masked(); @@ -67,6 +66,7 @@ int interrupt_init(void) static inline ulong get_timer_raw(void) { ulong now = READ_TIMER; + if (now >= resettime) return now - resettime; else @@ -129,20 +129,20 @@ unsigned long long get_ticks(void) ulong get_tbclk(void) { ulong tbclk; + tbclk = CFG_HZ; return tbclk; } /* - * Reset the cpu by setting up the watchdog timer and let him time out - * on the AT91CAP9ADK board + * Reset the cpu by setting up the watchdog timer and let him time out. */ void reset_cpu(ulong ignored) { /* this is the way Linux does it */ - AT91C_BASE_RSTC->RSTC_RCR = (0xA5 << 24) | - AT91C_RSTC_PROCRST | - AT91C_RSTC_PERRST; + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_PERRST); while (1); /* Never reached */ diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c index 69da5f3..d678897 100644 --- a/cpu/arm926ejs/at91cap9/usb.c +++ b/cpu/arm926ejs/at91sam9/usb.c @@ -24,15 +24,16 @@ #include <common.h> #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) -#ifdef CONFIG_AT91CAP9 #include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pmc.h> int usb_cpu_init(void) { /* Enable USB host clock. */ - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UHP; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_UHP; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); return 0; } @@ -40,8 +41,8 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { /* Disable USB host clock. */ - AT91C_BASE_PMC->PMC_PCDR = 1 << AT91C_ID_UHP; - AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_UHP; + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); return 0; } @@ -50,5 +51,4 @@ int usb_cpu_init_fail(void) return usb_cpu_stop(); } -#endif /* CONFIG_AT91CAP9 */ #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S index a87c112..79bc692 100644 --- a/cpu/arm926ejs/davinci/lowlevel_init.S +++ b/cpu/arm926ejs/davinci/lowlevel_init.S @@ -3,6 +3,11 @@ * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * + * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl> + * Changed: + * Made board specific defines such as DDR timing and PLL + * dividers. These should be set in the board config file + * * Partially based on TI sources, original copyrights follow: */ @@ -156,17 +161,17 @@ WaitPPL2Loop: /* Program the PLL Multiplier */ ldr r6, PLL2_PLLM - mov r2, $0x17 /* 162 MHz */ + mov r2, $CFG_DAVINCI_PLL2_PLLM str r2, [r6] /* Program the PLL2 Divisor Value */ ldr r6, PLL2_DIV2 - mov r3, $0x01 + mov r3, $CFG_DAVINCI_PLL2_DIV2 str r3, [r6] /* Program the PLL2 Divisor Value */ ldr r6, PLL2_DIV1 - mov r4, $0x0b /* 54 MHz */ + mov r4, $CFG_DAVINCI_PLL2_DIV1 str r4, [r6] /* PLL2 DIV2 MMR */ @@ -273,7 +278,7 @@ checkDDRStatClkStop: bne checkDDRStatClkStop /*------------------------------------------------------* - * Program DDR2 MMRs for 162MHz Setting * + * Program DDR2 MMRs * *------------------------------------------------------*/ /* Program PHY Control Register */ @@ -288,12 +293,12 @@ checkDDRStatClkStop: /* Program SDRAM TIM-0 Config Register */ ldr r6, SDTIM0 - ldr r7, SDTIM0_VAL_162MHz + ldr r7, SDTIM0_VAL str r7, [r6] /* Program SDRAM TIM-1 Config Register */ ldr r6, SDTIM1 - ldr r7, SDTIM1_VAL_162MHz + ldr r7, SDTIM1_VAL str r7, [r6] /* Program the SDRAM Bank Config Control Register */ @@ -435,7 +440,7 @@ WaitLoop: /* Program the PLL Multiplier */ ldr r6, PLL1_PLLM - mov r3, $0x15 /* For 594MHz */ + mov r3, $CFG_DAVINCI_PLL1_PLLM str r3, [r6] /* Wait for PLL to Reset Properly */ @@ -467,7 +472,7 @@ PLL1Lock: nop /*------------------------------------------------------* - * AEMIF configuration for NOR Flash (double check) * + * AEMIF configuration for NAND/NOR Flash * *------------------------------------------------------*/ ldr r0, _PINMUX0 ldr r1, _DEV_SETTING @@ -479,6 +484,12 @@ PLL1Lock: orr r2, r2, r1 str r2, [r0] + ldr r0, ACFG2 + ldr r1, ACFG2_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + ldr r0, ACFG3 ldr r1, ACFG3_VAL ldr r2, [r0] @@ -497,6 +508,12 @@ PLL1Lock: and r1, r2, r1 str r1, [r0] + ldr r0, NANDFCR + ldr r1, NANDFCR_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + /*--------------------------------------* * VTP manual Calibration * *--------------------------------------*/ @@ -560,24 +577,36 @@ _PINMUX1: .word 0x01c40004 /* Device Configuration Registers */ _DEV_SETTING: - .word 0x00000c1f + .word CFG_DAVINCI_PINMUX_0 WAITCFG: .word 0x01e00004 WAITCFG_VAL: - .word 0 + .word CFG_DAVINCI_WAITCFG +ACFG2: + .word 0x01e00010 +ACFG2_VAL: + .word CFG_DAVINCI_ACFG2 ACFG3: .word 0x01e00014 ACFG3_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG3 ACFG4: .word 0x01e00018 ACFG4_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG4 ACFG5: .word 0x01e0001c ACFG5_VAL: - .word 0x3ffffffd + .word CFG_DAVINCI_ACFG5 +NANDFCR: + .word 0x01e00060 +NANDFCR_VAL: +#ifdef CFG_DAVINCI_NANDCE + .word (1 << (CFG_DAVINCI_NANDCE - 2)) +#else + .word 0x00000000 +#endif MDCTL_DDR2: .word 0x01c41a34 @@ -599,33 +628,27 @@ PSC_FLAG_CLEAR: PSC_GEM_FLAG_CLEAR: .word 0xfffffeff -/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */ +/* DDR2 MMR & CONFIGURATION VALUES */ DDRCTL: .word 0x200000e4 DDRCTL_VAL: - .word 0x50006405 + .word CFG_DAVINCI_DDRCTL SDREF: .word 0x2000000c SDREF_VAL: - .word 0x000005c3 + .word CFG_DAVINCI_SDREF SDCFG: .word 0x20000008 SDCFG_VAL: -#ifdef DDR_4BANKS - .word 0x00178622 -#elif defined DDR_8BANKS - .word 0x00178632 -#else -#error "Unknown DDR configuration!!!" -#endif + .word CFG_DAVINCI_SDCFG SDTIM0: .word 0x20000010 -SDTIM0_VAL_162MHz: - .word 0x28923211 +SDTIM0_VAL: + .word CFG_DAVINCI_SDTIM0 SDTIM1: .word 0x20000014 -SDTIM1_VAL_162MHz: - .word 0x0016c722 +SDTIM1_VAL: + .word CFG_DAVINCI_SDTIM1 VTPIOCR: .word 0x200000f0 /* VTP IO Control register */ DDRVTPR: @@ -699,7 +722,7 @@ PLL2_DIV_MASK: MMARG_BRF0: .word 0x01c42010 /* BRF margin mode 0 (R/W)*/ MMARG_BRF0_VAL: - .word 0x00444400 + .word CFG_DAVINCI_MMARG_BRF0 DDR2_START_ADDR: .word 0x80000000 diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c index 127be9f..3257f83 100644 --- a/cpu/arm926ejs/davinci/nand.c +++ b/cpu/arm926ejs/davinci/nand.c @@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) dummy = emif_addr->NANDF3ECC; dummy = emif_addr->NANDF4ECC; - emif_addr->NANDFCR |= (1 << 8); + emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6)); } static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) @@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1; - region = 1; + region = (CFG_DAVINCI_NANDCE - 1); while (n--) { tmp = nand_davinci_readecc(mtd, region); *ecc_code++ = tmp; @@ -311,40 +311,9 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i static void nand_flash_init(void) { - u_int32_t acfg1 = 0x3ffffffc; - u_int32_t acfg2 = 0x3ffffffc; - u_int32_t acfg3 = 0x3ffffffc; - u_int32_t acfg4 = 0x3ffffffc; - emifregs emif_regs; - - /*------------------------------------------------------------------* - * NAND FLASH CHIP TIMEOUT @ 459 MHz * - * * - * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz * - * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns * - * * - *------------------------------------------------------------------*/ - acfg1 = 0 - | (0 << 31 ) /* selectStrobe */ - | (0 << 30 ) /* extWait */ - | (1 << 26 ) /* writeSetup 10 ns */ - | (3 << 20 ) /* writeStrobe 40 ns */ - | (1 << 17 ) /* writeHold 10 ns */ - | (1 << 13 ) /* readSetup 10 ns */ - | (5 << 7 ) /* readStrobe 60 ns */ - | (1 << 4 ) /* readHold 10 ns */ - | (3 << 2 ) /* turnAround ?? ns */ - | (0 << 0 ) /* asyncSize 8-bit bus */ - ; - - emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; - - emif_regs->AWCCR |= 0x10000000; - emif_regs->AB1CR = acfg1; /* 0x08244128 */; - emif_regs->AB2CR = acfg2; - emif_regs->AB3CR = acfg3; - emif_regs->AB4CR = acfg4; - emif_regs->NANDFCR = 0x00000101; + /* All EMIF initialization is done in lowlevel_init.S + * and config values are in the board config files + */ } int board_nand_init(struct nand_chip *nand) diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c index 8bb8b45..4797797 100644 --- a/cpu/arm926ejs/davinci/timer.c +++ b/cpu/arm926ejs/davinci/timer.c @@ -42,9 +42,9 @@ typedef volatile struct { u_int32_t pid12; - u_int32_t emumgt_clksped; - u_int32_t gpint_en; - u_int32_t gpdir_dat; + u_int32_t emumgt; + u_int32_t na1; + u_int32_t na2; u_int32_t tim12; u_int32_t tim34; u_int32_t prd12; @@ -52,21 +52,12 @@ typedef volatile struct { u_int32_t tcr; u_int32_t tgcr; u_int32_t wdtcr; - u_int32_t tlgc; - u_int32_t tlmr; } davinci_timer; davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE; #define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ) -#define READ_TIMER timer->tim34 - -/* - * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap - * around of timestamp already after min ~159s, divide it, e.g. by 16. - * timestamp will then wrap around all min ~42min - */ -#define DIV(x) ((x) >> 4) +#define TIM_CLK_DIV 16 static ulong timestamp; static ulong lastinc; @@ -76,63 +67,50 @@ int timer_init(void) /* We are using timer34 in unchained 32-bit mode, full speed */ timer->tcr = 0x0; timer->tgcr = 0x0; - timer->tgcr = 0x06; + timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8); timer->tim34 = 0x0; timer->prd34 = TIMER_LOAD_VAL; lastinc = 0; - timer->tcr = 0x80 << 16; timestamp = 0; + timer->tcr = 2 << 22; return(0); } void reset_timer(void) { - reset_timer_masked(); -} - -ulong get_timer(ulong base) -{ - return(get_timer_masked() - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} - -void udelay(unsigned long usec) -{ - udelay_masked(usec); -} - -void reset_timer_masked(void) -{ - lastinc = DIV(READ_TIMER); + timer->tcr = 0x0; + timer->tim34 = 0; + lastinc = 0; timestamp = 0; + timer->tcr = 2 << 22; } -ulong get_timer_raw(void) +static ulong get_timer_raw(void) { - ulong now = DIV(READ_TIMER); + ulong now = timer->tim34; if (now >= lastinc) { /* normal mode */ timestamp += now - lastinc; } else { /* overflow ... */ - timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc; + timestamp += now + TIMER_LOAD_VAL - lastinc; } lastinc = now; return timestamp; } -ulong get_timer_masked(void) +ulong get_timer(ulong base) +{ + return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); } + +void set_timer(ulong t) { - return(get_timer_raw() / DIV(TIMER_LOAD_VAL)); + timestamp = t; } -void udelay_masked(unsigned long usec) +void udelay(unsigned long usec) { ulong tmo; ulong endtime; @@ -140,7 +118,7 @@ void udelay_masked(unsigned long usec) tmo = CFG_HZ_CLOCK / 1000; tmo *= usec; - tmo /= 1000; + tmo /= (1000 * TIM_CLK_DIV); endtime = get_timer_raw() + tmo; @@ -165,8 +143,5 @@ unsigned long long get_ticks(void) */ ulong get_tbclk(void) { - ulong tbclk; - - tbclk = CFG_HZ; - return(tbclk); + return CFG_HZ; } diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c index 0971fea..1819f6b 100644 --- a/cpu/arm926ejs/interrupts.c +++ b/cpu/arm926ejs/interrupts.c @@ -38,7 +38,7 @@ #include <common.h> #include <arm926ejs.h> -#if defined(CONFIG_INTEGRATOR) || defined(CONFIG_AT91CAP9ADK) +#ifdef CONFIG_INTEGRATOR /* Timer functionality supplied by Integrator board (AP or CP) */ diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h deleted file mode 100644 index 9970b72..0000000 --- a/cpu/bf533/bf533_serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf533_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf533_SERIAL_H -#define _Bf533_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf533/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk deleted file mode 100644 index 2caa3cc..0000000 --- a/cpu/bf533/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# U-boot - config.mk -# -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -PLATFORM_RELFLAGS += -mcpu=bf533 diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c deleted file mode 100644 index edb771e..0000000 --- a/cpu/bf533/cpu.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, - * clear it so we don't confuse the next application - */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf533/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S deleted file mode 100644 index 62e3d65..0000000 --- a/cpu/bf533/flush.S +++ /dev/null @@ -1,405 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /* Anamoly 05000209 */ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ - - /* Save in extraction pattern for later deposit. */ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall: - IFLUSH [P0++]; -ieall: - NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf533/init_sdram.S b/cpu/bf533/init_sdram.S deleted file mode 100644 index 67a99e4..0000000 --- a/cpu/bf533/init_sdram.S +++ /dev/null @@ -1,183 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD; - w[p0] = r0.l; - SSYNC; -#endif - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf533/init_sdram_bootrom_initblock.S b/cpu/bf533/init_sdram_bootrom_initblock.S deleted file mode 100644 index 8694ca2..0000000 --- a/cpu/bf533/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,183 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; -#endif - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S deleted file mode 100644 index 7556ec9..0000000 --- a/cpu/bf533/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c deleted file mode 100644 index 3d1c3bc..0000000 --- a/cpu/bf533/interrupts.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * U-boot - interrupts.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on interrupts.c - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include "cpu.h" - -static ulong timestamp; -static ulong last_time; -static int int_flag; - -int irq_flags; /* needed by asm-blackfin/system.h */ - -/* Functions just to satisfy the linker */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On BF533 it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On BF533 it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - ulong tbclk; - - tbclk = CFG_HZ; - return tbclk; -} - -void enable_interrupts(void) -{ -} - -int disable_interrupts(void) -{ - return 1; -} - -int interrupt_init(void) -{ - return (0); -} - -void udelay(unsigned long usec) -{ - unsigned long delay, start, stop; - unsigned long cclk; - cclk = (CONFIG_CCLK_HZ); - - while (usec > 1) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ - if (usec < 1000) { - delay = (usec * (cclk / 244)) >> 12; - usec = 0; - } else { - delay = (1000 * (cclk / 244)) >> 12; - usec -= 1000; - } - - asm volatile (" %0 = CYCLES;":"=r" (start)); - do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); - } while (stop - start < delay); - } - - return; -} - -void timer_init(void) -{ - *pTCNTL = 0x1; - *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; - *pTPERIOD = MAX_TIM_LOAD; - *pTCNTL = 0x7; - asm("CSYNC;"); - - timestamp = 0; - last_time = 0; -} - -/* Any network command or flash - * command is started get_timer shall - * be called before TCOUNT gets reset, - * to implement the accurate timeouts. - * - * How ever milliconds doesn't return - * the number that has been elapsed from - * the last reset. - * - * As get_timer is used in the u-boot - * only for timeouts this should be - * sufficient - */ -ulong get_timer(ulong base) -{ - ulong milisec; - - /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - - /** - * Find if the TCOUNT is reset - * timestamp gives the number of times - * TCOUNT got reset - */ - if (clocks < last_time) - timestamp++; - last_time = clocks; - - /* Get the number of milliseconds */ - milisec = clocks / (CONFIG_CCLK_HZ / 1000); - - /** - * Find the number of millisonds - * that got elapsed before this TCOUNT cycle - */ - milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); - - return (milisec - base); -} diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c deleted file mode 100644 index 05d9a1b..0000000 --- a/cpu/bf533/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SIC_IMASK) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c deleted file mode 100644 index 05fcfcc..0000000 --- a/cpu/bf533/serial.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF533 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include <asm/io.h> -#include "bf533_serial.h" -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ - *pUART_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART_LSR; /* Clear status bit */ - uart_rbr_val = *pUART_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART_LSR & THRE)) - continue; - asm("csync;"); - - *pUART_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S deleted file mode 100644 index c32fef6..0000000 --- a/cpu/bf533/start.S +++ /dev/null @@ -1,313 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF533/BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - call init_sdram; - - /* relocate into to RAM */ - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - - /* DMA reset code to Hi of L1 SRAM */ -copy: - /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.H = hi(SYSMMR_BASE); - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - /* Destination DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - /* Set Destination Base Address */ - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - - /* Write 1 to clear DMA interrupt */ - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S deleted file mode 100644 index 6d4731b..0000000 --- a/cpu/bf533/start1.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * U-boot - start1.S Code running out of RAM after relocation - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -.global start1; -.global _start1; - -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c deleted file mode 100644 index 7e156d5..0000000 --- a/cpu/bf533/traps.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, - * return without doing anything. Then, - * if we get the same fault again, handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", - addr, last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) { - addr = *(unsigned int *)pDCPLB_FAULT_ADDR; - } else { - addr = *(unsigned int *)pICPLB_FAULT_ADDR; - } - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", - fp->rete, fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", - fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf533/video.c b/cpu/bf533/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf533/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf533/video.h b/cpu/bf533/video.h deleted file mode 100644 index d237f6a..0000000 --- a/cpu/bf533/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile deleted file mode 100644 index 06d1aae..0000000 --- a/cpu/bf537/Makefile +++ /dev/null @@ -1,52 +0,0 @@ -# U-boot - Makefile -# -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).a - -SOBJS = start.o start1.o interrupt.o cache.o flush.o init_sdram.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o i2c.o - -EXTRA = init_sdram_bootrom_initblock.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) - -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/cpu/bf537/cache.S b/cpu/bf537/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf537/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk deleted file mode 100644 index fbbe75d..0000000 --- a/cpu/bf537/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# U-boot - config.mk -# -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -PLATFORM_RELFLAGS += -mcpu=bf537 diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c deleted file mode 100644 index 7233908..0000000 --- a/cpu/bf537/cpu.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - if ((*pCHIPID >> 28) < 2) - return; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - if ((*pCHIPID >> 28) < 2) - return; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, - * clear it so we don't confuse the next application - */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf537/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S deleted file mode 100644 index fbd26cc..0000000 --- a/cpu/bf537/flush.S +++ /dev/null @@ -1,403 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /* Anamoly 05000209 */ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ - - /* Save in extraction pattern for later deposit. */ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf537/init_sdram.S b/cpu/bf537/init_sdram.S deleted file mode 100644 index e997500..0000000 --- a/cpu/bf537/init_sdram.S +++ /dev/null @@ -1,178 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) - -#ifdef CONFIG_BF537 - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; -#endif - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf537/init_sdram_bootrom_initblock.S b/cpu/bf537/init_sdram_bootrom_initblock.S deleted file mode 100644 index 197b836..0000000 --- a/cpu/bf537/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,203 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE != BF537_UART_BOOT) - -#ifdef CONFIG_BF537 - /* Enable PHY CLK buffer output */ - p0.h = hi(VR_CTL); - p0.l = lo(VR_CTL); - r0.l = w[p0]; - bitset(r0, 14); - w[p0] = r0.l; - ssync; -#endif - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S deleted file mode 100644 index fe850bf..0000000 --- a/cpu/bf537/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c deleted file mode 100644 index 853fa49..0000000 --- a/cpu/bf537/interrupts.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * U-boot - interrupts.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on interrupts.c - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include "cpu.h" - -static ulong timestamp; -static ulong last_time; -static int int_flag; - -int irq_flags; /* needed by asm-blackfin/system.h */ - -/* Functions just to satisfy the linker */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On BF533 it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On BF533 it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - - tbclk = CFG_HZ; - return tbclk; -} - -void enable_interrupts(void) -{ -} - -int disable_interrupts(void) -{ - return 1; -} - -int interrupt_init(void) -{ - return (0); -} - -void udelay(unsigned long usec) -{ - unsigned long delay, start, stop; - unsigned long cclk; - cclk = (CONFIG_CCLK_HZ); - - while (usec > 1) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ - if (usec < 1000) { - delay = (usec * (cclk / 244)) >> 12; - usec = 0; - } else { - delay = (1000 * (cclk / 244)) >> 12; - usec -= 1000; - } - - asm volatile (" %0 = CYCLES;":"=r" (start)); - do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); - } while (stop - start < delay); - } - - return; -} - -void timer_init(void) -{ - *pTCNTL = 0x1; - *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; - *pTPERIOD = MAX_TIM_LOAD; - *pTCNTL = 0x7; - asm("CSYNC;"); - - timestamp = 0; - last_time = 0; -} - -/* Any network command or flash - * command is started get_timer shall - * be called before TCOUNT gets reset, - * to implement the accurate timeouts. - * - * How ever milliconds doesn't return - * the number that has been elapsed from - * the last reset. - * - * As get_timer is used in the u-boot - * only for timeouts this should be - * sufficient - */ -ulong get_timer(ulong base) -{ - ulong milisec; - - /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - - /** - * Find if the TCOUNT is reset - * timestamp gives the number of times - * TCOUNT got reset - */ - if (clocks < last_time) - timestamp++; - last_time = clocks; - - /* Get the number of milliseconds */ - milisec = clocks / (CONFIG_CCLK_HZ / 1000); - - /** - * Find the number of millisonds - * that got elapsed before this TCOUNT cycle - */ - milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); - - return (milisec - base); -} - -void reset_timer (void) -{ - timestamp = 0; -} diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c deleted file mode 100644 index 05d9a1b..0000000 --- a/cpu/bf537/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SIC_IMASK) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c deleted file mode 100644 index 3c6a370..0000000 --- a/cpu/bf537/serial.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF537 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf537_serial.c: Serial driver for BlackFin BF537 internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include <asm/io.h> -#include "serial.h" -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART0_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART0_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART0_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ - *pUART0_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART0_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART0_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART0_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART0_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART0_LSR; /* Clear status bit */ - uart_rbr_val = *pUART0_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART0_LSR & THRE)) - continue; - asm("csync;"); - - *pUART0_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h deleted file mode 100644 index e4e0b9a..0000000 --- a/cpu/bf537/serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf537_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf537_SERIAL_H -#define _Bf537_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART0_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART0_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S deleted file mode 100644 index a48f3c6..0000000 --- a/cpu/bf537/start.S +++ /dev/null @@ -1,576 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF537 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; -.global _icache_enable; -.global _dcache_enable; -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) -.global _memory_post_test; -.global _post_flag; -#endif - -#if (BFIN_BOOT_MODE == BF537_UART_BOOT) -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif -#endif - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - -#if (BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; -#endif - -#if (BFIN_BOOT_MODE == BF537_UART_BOOT) - - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; -#endif - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - * we need to read MAC address from FLASH - */ - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - -#if ((BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) && (BFIN_BOOT_MODE != BF537_UART_BOOT)) - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - call init_sdram; -#endif - - -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) - /* DMA POST code to Hi of L1 SRAM */ -postcopy: - /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.H = hi(SYSMMR_BASE); - P1.L = lo(SYSMMR_BASE); - - R0.H = _text_l1; - R0.L = _text_l1; - R1.H = _etext_l1; - R1.L = _etext_l1; - R2 = R1 - R0; /* Count */ - R0.H = _etext; - R0.L = _etext; - R1.H = (CFG_MONITOR_BASE >> 16); - R1.L = (CFG_MONITOR_BASE & 0xFFFF); - R0 = R0 - R1; - R1.H = (CFG_FLASH_BASE >> 16); - R1.L = (CFG_FLASH_BASE & 0xFFFF); - R0 = R0 + R1; /* Source Address */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - /* Destination DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); - - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -POST_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump POST_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* DMA POST data to Hi of L1 SRAM */ - R0.H = _rodata_l1; - R0.L = _rodata_l1; - R1.H = _erodata_l1; - R1.L = _erodata_l1; - R2 = R1 - R0; /* Count */ - R0.H = _erodata; - R0.L = _erodata; - R1.H = (CFG_MONITOR_BASE >> 16); - R1.L = (CFG_MONITOR_BASE & 0xFFFF); - R0 = R0 - R1; - R1.H = (CFG_FLASH_BASE >> 16); - R1.L = (CFG_FLASH_BASE & 0xFFFF); - R0 = R0 + R1; /* Source Address */ - R1.H = hi(DATA_BANKB_SRAM); /* Destination Address (high) */ - R1.L = lo(DATA_BANKB_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -POST_DATA_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump POST_DATA_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - p0.l = _memory_post_test; - p0.h = _memory_post_test; - r0 = 0x0; - call (p0); - r7 = r0; /* save return value */ - - call init_sdram; -#endif - - /* relocate into to RAM */ - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - -#ifdef CONFIG_BF537 -/* Initialise General-Purpose I/O Modules on BF537 - * Rev 0.0 Anomaly 05000212 - PORTx_FER, - * PORT_MUX Registers Do Not accept "writes" correctly - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - R0.L = W[P0]; /* Read */ - nop; - nop; - nop; - ssync; - R0 = 0x000F(Z); - W[P0] = R0.L; /* Write */ - nop; - nop; - nop; - ssync; - W[P0] = R0.L; /* Enable peripheral function of PORTF for UART0 and UART1 */ - nop; - nop; - nop; - ssync; - - p0.h = hi(PORTH_FER); - p0.l = lo(PORTH_FER); - R0.L = W[P0]; /* Read */ - nop; - nop; - nop; - ssync; - R0 = 0xFFFF(Z); - W[P0] = R0.L; /* Write */ - nop; - nop; - nop; - ssync; - W[P0] = R0.L; /* Enable peripheral function of PORTH for MAC */ - nop; - nop; - nop; - ssync; - -#endif - - /* DMA reset code to Hi of L1 SRAM */ -copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(MDMA_D0_IRQ_STATUS); - p0.l = lo(MDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - -#if defined(CONFIG_BF537)&&defined(CONFIG_POST) - p0.l = _post_flag; - p0.h = _post_flag; - r0 = r7; - [p0] = r0; -#endif - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: - nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S deleted file mode 100644 index 6d4731b..0000000 --- a/cpu/bf537/start1.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * U-boot - start1.S Code running out of RAM after relocation - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -.global start1; -.global _start1; - -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c deleted file mode 100644 index 51de322..0000000 --- a/cpu/bf537/traps.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, - * return without doing anything. Then, - * if we get the same fault again, handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", - addr, last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) { - addr = *pDCPLB_FAULT_ADDR; - } else { - addr = *pICPLB_FAULT_ADDR; - } - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - -trap_c_return: - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", - fp->rete, fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", - fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf537/video.c b/cpu/bf537/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf537/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf537/video.h b/cpu/bf537/video.h deleted file mode 100644 index a43553f..0000000 --- a/cpu/bf537/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern*/ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/bf561/cache.S b/cpu/bf561/cache.S deleted file mode 100644 index d9015c6..0000000 --- a/cpu/bf561/cache.S +++ /dev/null @@ -1,129 +0,0 @@ -#define ASSEMBLY -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/mpu.h> - -.text -.align 2 -ENTRY(_blackfin_icache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; - 1: - IFLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - IFLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_blackfin_dcache_flush_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSH[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - FLUSH[P0]; - SSYNC; - RTS; - -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = (R7:5); - - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7, IMC_P); - CLI R6; - /* SSYNC required before invalidating cache. */ - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:5) =[SP++]; - RTS; - -/* - * Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = (R7:6); - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - R7 =[P0]; - - /* - * Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7, DMC0_P); - BITCLR(R7, DMC1_P); - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - /* Configures the data cache again */ - - R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - R7 = R7 | R6; - - CLI R6; - SSYNC; - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - (R7:6) =[SP++]; - RTS; - -ENTRY(_blackfin_dcache_invalidate_range) - R2 = -32; - R2 = R0 & R2; - P0 = R2; - P1 = R1; - CSYNC; -1: - FLUSHINV[P0++]; - CC = P0 < P1(iu); - IF CC JUMP 1b(bp); - - /* - * If the data crosses a cache line, then we'll be pointing to - * the last cache line, but won't have flushed/invalidated it yet, so do - * one more. - */ - FLUSHINV[P0]; - SSYNC; - RTS; diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk deleted file mode 100644 index 3628a02..0000000 --- a/cpu/bf561/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# U-boot - config.mk -# -# Copyright (c) 2005-2007 Analog Devices Inc. -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -PLATFORM_RELFLAGS += -mcpu=bf561 diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c deleted file mode 100644 index e0dd2f5..0000000 --- a/cpu/bf561/cpu.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/blackfin.h> -#include <command.h> -#include <asm/entry.h> -#include <asm/cplb.h> -#include <asm/io.h> - -#define CACHE_ON 1 -#define CACHE_OFF 0 - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_INST_SRAM) - ); - - return 0; -} - -/* These functions are just used to satisfy the linker */ -int cpu_init(void) -{ - return 0; -} - -int cleanup_before_linux(void) -{ - return 0; -} - -void icache_enable(void) -{ - unsigned int *I0, *I1; - int i, j = 0; - - /* Before enable icache, disable it first */ - icache_disable(); - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & icplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & icplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - icplb_table[i][0], icplb_table[i][1]); - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - - } - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); -} - -void icache_disable(void) -{ - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); -} - -int icache_status(void) -{ - unsigned int value; - value = *(unsigned int *)IMEM_CONTROL; - - if (value & (IMC | ENICPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} - -void dcache_enable(void) -{ - unsigned int *I0, *I1; - unsigned int temp; - int i, j = 0; - - /* Before enable dcache, disable it first */ - dcache_disable(); - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - /* make sure the locked ones go in first */ - for (i = 0; i < page_descriptor_table_size; i++) { - if (CPLB_LOCK & dcplb_table[i][1]) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - } else { - debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - } - } - - for (i = 0; i < page_descriptor_table_size; i++) { - if (!(CPLB_LOCK & dcplb_table[i][1])) { - debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, - dcplb_table[i][0], dcplb_table[i][1]); - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; - j++; - if (j == 16) { - break; - } - } - } - - /* Fill the rest with invalid entry */ - if (j <= 15) { - for (; j < 16; j++) { - debug("filling %i with 0", j); - *I1++ = 0x0; - } - } - - temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; - SSYNC(); -} - -void dcache_disable(void) -{ - - unsigned int *I0, *I1; - int i; - - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - - /* after disable dcache, clear it so we don't confuse the next application */ - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - - for (i = 0; i < 16; i++) { - *I0++ = 0x0; - *I1++ = 0x0; - } -} - -int dcache_status(void) -{ - unsigned int value; - value = *(unsigned int *)DMEM_CONTROL; - if (value & (ENDCPLB)) - return CACHE_ON; - else - return CACHE_OFF; -} diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h deleted file mode 100644 index b6b73b1..0000000 --- a/cpu/bf561/cpu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -#define INTERNAL_IRQS (32) -#define NUM_IRQ_NODES 16 -#define DEF_INTERRUPT_FLAGS 1 -#define MAX_TIM_LOAD 0xFFFFFFFF - -void blackfin_irq_panic(int reason, struct pt_regs *reg); -extern void dump(struct pt_regs *regs); -void display_excp(void); -asmlinkage void evt_nmi(void); -asmlinkage void evt_exception(void); -asmlinkage void trap(void); -asmlinkage void evt_ivhw(void); -asmlinkage void evt_rst(void); -asmlinkage void evt_timer(void); -asmlinkage void evt_evt7(void); -asmlinkage void evt_evt8(void); -asmlinkage void evt_evt9(void); -asmlinkage void evt_evt10(void); -asmlinkage void evt_evt11(void); -asmlinkage void evt_evt12(void); -asmlinkage void evt_evt13(void); -asmlinkage void evt_soft_int1(void); -asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs *regs); -void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs *fp); -void blackfin_do_irq(int vec, struct pt_regs *fp); -void blackfin_init_IRQ(void); -void blackfin_enable_irq(unsigned int irq); -void blackfin_disable_irq(unsigned int irq); -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); -int blackfin_request_irq(unsigned int irq, - void (*handler) (int, void *, struct pt_regs *), - unsigned long flags, const char *devname, - void *dev_id); -void timer_init(void); -#endif diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S deleted file mode 100644 index 0140a60..0000000 --- a/cpu/bf561/flush.S +++ /dev/null @@ -1,402 +0,0 @@ -/* Copyright (C) 2003-2007 Analog Devices Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/cplb.h> -#include <config.h> -#include <asm/blackfin.h> - -.text - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the instruction cache. - */ - -ENTRY(_flush_instruction_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL; - R6 = 16; -inext: R0 = [P5++]; - R1 = [P4++]; - [--SP] = RETS; - CALL _icplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -iskip: R6 += -1; - CC = R6; - IF CC JUMP inext; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular ICPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_icplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP iflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ - - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (ITEST_COMMAND & 0xFFFF); - P5.H = (ITEST_COMMAND >> 16); - P4.L = (ITEST_DATA0 & 0xFFFF); - P4.H = (ITEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 4; - LSETUP (ifs1, ife1) LC1 = P2; -ifs1: P0 = 32; /* iterate over all sets*/ - LSETUP (ifs0, ife0) LC0 = P0; -ifs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - [P5] = R6; /* Issue Command*/ - SSYNC; /* CSYNC will not work here :(*/ - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP ifskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - IFLUSH [P3]; /* And flush the entry*/ -ifskip: -ife0: R5 += 1; /* Advance to next Set*/ -ife1: NOP; - -ifinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -iflush_whole_page: - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - IFLUSH [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; - SSYNC; - JUMP ifinished; - -/* This is an external function being called by the user - * application through __flush_cache_all. Currently this function - * serves the purpose of flushing all the pending writes in - * in the data cache. - */ - -ENTRY(_flush_data_cache) - [--SP] = ( R7:6, P5:4 ); - LINK 12; - SP += -12; - P5.H = (DCPLB_ADDR0 >> 16); - P5.L = (DCPLB_ADDR0 & 0xFFFF); - P4.H = (DCPLB_DATA0 >> 16); - P4.L = (DCPLB_DATA0 & 0xFFFF); - R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); - R6 = 16; -next: R0 = [P5++]; - R1 = [P4++]; - CC = BITTST(R1, 14); /* Is it write-through?*/ - IF CC JUMP skip; /* If so, ignore it.*/ - R2 = R1 & R7; /* Is it a dirty, cached page?*/ - CC = R2; - IF !CC JUMP skip; /* If not, ignore it.*/ - [--SP] = RETS; - CALL _dcplb_flush; /* R0 = page, R1 = data*/ - RETS = [SP++]; -skip: R6 += -1; - CC = R6; - IF CC JUMP next; - SSYNC; - SP += 12; - UNLINK; - ( R7:6, P5:4 ) = [SP++]; - RTS; - -/* This is an internal function to flush all pending - * writes in the cache associated with a particular DCPLB. - * - * R0 - page's start address - * R1 - CPLB's data field. - */ - -.align 2 -ENTRY(_dcplb_flush) - [--SP] = ( R7:0, P5:0 ); - [--SP] = LC0; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC1; - [--SP] = LT1; - [--SP] = LB1; - - /* If it's a 1K or 4K page, then it's quickest to - * just systematically flush all the addresses in - * the page, regardless of whether they're in the - * cache, or dirty. If it's a 1M or 4M page, there - * are too many addresses, and we have to search the - * cache for lines corresponding to the page. - */ - - CC = BITTST(R1, 17); /* 1MB or 4MB */ - IF !CC JUMP dflush_whole_page; - - /* We're only interested in the page's size, so extract - * this from the CPLB (bits 17:16), and scale to give an - * offset into the page_size and page_prefix tables. - */ - - R1 <<= 14; - R1 >>= 30; - R1 <<= 2; - - /* The page could be mapped into Bank A or Bank B, depending - * on (a) whether both banks are configured as cache, and - * (b) on whether address bit A[x] is set. x is determined - * by DCBS in DMEM_CONTROL - */ - - R2 = 0; /* Default to Bank A (Bank B would be 1)*/ - - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); - - R3 = [P0]; /* If Bank B is not enabled as cache*/ - CC = BITTST(R3, 2); /* then Bank A is our only option.*/ - IF CC JUMP bank_chosen; - - R4 = 1<<14; /* If DCBS==0, use A[14].*/ - R5 = R4 << 7; /* If DCBS==1, use A[23];*/ - CC = BITTST(R3, 4); - IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ - R5 = R0 & R4; /* Use it to test the Page address*/ - CC = R5; /* and if that bit is set, we use Bank B,*/ - R2 = CC; /* else we use Bank A.*/ - R2 <<= 23; /* The Bank selection's at posn 23.*/ - -bank_chosen: - - /* We can also determine the sub-bank used, because this is - * taken from bits 13:12 of the address. - */ - - R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - /* Save in extraction pattern for later deposit.*/ - R3.H = R4.L << 0; - - /* So: - * R0 = Page start - * R1 = Page length (actually, offset into size/prefix tables) - * R2 = Bank select mask - * R3 = sub-bank deposit values - * - * The cache has 2 Ways, and 64 sets, so we iterate through - * the sets, accessing the tag for each Way, for our Bank and - * sub-bank, looking for dirty, valid tags that match our - * address prefix. - */ - - P5.L = (DTEST_COMMAND & 0xFFFF); - P5.H = (DTEST_COMMAND >> 16); - P4.L = (DTEST_DATA0 & 0xFFFF); - P4.H = (DTEST_DATA0 >> 16); - - P0.L = page_prefix_table; - P0.H = page_prefix_table; - P1 = R1; - R5 = 0; /* Set counter*/ - P0 = P1 + P0; - R4 = [P0]; /* This is the address prefix*/ - - - /* We're reading (bit 1==0) the tag (bit 2==0), and we - * don't care about which double-word, since we're only - * fetching tags, so we only have to set Set, Bank, - * Sub-bank and Way. - */ - - P2 = 2; - LSETUP (fs1, fe1) LC1 = P2; -fs1: P0 = 64; /* iterate over all sets*/ - LSETUP (fs0, fe0) LC0 = P0; -fs0: R6 = R5 << 5; /* Combine set*/ - R6.H = R3.H << 0 ; /* and sub-bank*/ - R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ - BITSET(R6,14); - [P5] = R6; /* Issue Command*/ - SSYNC; - R7 = [P4]; /* and read Tag.*/ - CC = BITTST(R7, 0); /* Check if valid*/ - IF !CC JUMP fskip; /* and skip if not.*/ - CC = BITTST(R7, 1); /* Check if dirty*/ - IF !CC JUMP fskip; /* and skip if not.*/ - - /* Compare against the page address. First, plant bits 13:12 - * into the tag, since those aren't part of the returned data. - */ - - R7 = DEPOSIT(R7, R3); /* set 13:12*/ - R1 = R7 & R4; /* Mask off lower bits*/ - CC = R1 == R0; /* Compare against page start.*/ - IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ - - /* Tag address matches against page, so this is an entry - * we must flush. - */ - - R7 >>= 10; /* Mask off the non-address bits*/ - R7 <<= 10; - P3 = R7; - SSYNC; - FLUSHINV [P3]; /* And flush the entry*/ -fskip: -fe0: R5 += 1; /* Advance to next Set*/ -fe1: BITSET(R2, 26); /* Go to next Way.*/ - -dfinished: - SSYNC; /* Ensure the data gets out to mem.*/ - - /*Finished. Restore context.*/ - LB1 = [SP++]; - LT1 = [SP++]; - LC1 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - LC0 = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -dflush_whole_page: - - /* It's a 1K or 4K page, so quicker to just flush the - * entire page. - */ - - P1 = 32; /* For 1K pages*/ - P2 = P1 << 2; /* For 4K pages*/ - P0 = R0; /* Start of page*/ - CC = BITTST(R1, 16); /* Whether 1K or 4K*/ - IF CC P1 = P2; - P1 += -1; /* Unroll one iteration*/ - SSYNC; - FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ - LSETUP (eall, eall) LC0 = P1; -eall: FLUSHINV [P0++]; - SSYNC; - JUMP dfinished; - -.align 4; -page_prefix_table: -.byte4 0xFFFFFC00; /* 1K */ -.byte4 0xFFFFF000; /* 4K */ -.byte4 0xFFF00000; /* 1M */ -.byte4 0xFFC00000; /* 4M */ -.page_prefix_table.end: diff --git a/cpu/bf561/init_sdram.S b/cpu/bf561/init_sdram.S deleted file mode 100644 index f5ccf30..0000000 --- a/cpu/bf561/init_sdram.S +++ /dev/null @@ -1,175 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S deleted file mode 100644 index 9cc5e78..0000000 --- a/cpu/bf561/init_sdram_bootrom_initblock.S +++ /dev/null @@ -1,189 +0,0 @@ -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mem_init.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> -.global init_sdram; - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -init_sdram: - [--SP] = ASTAT; - [--SP] = RETS; - [--SP] = (R7:0); - [--SP] = (P5:0); - - - p0.h = hi(SICA_IWR0); - p0.l = lo(SICA_IWR0); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - p0.h = hi(SPI_BAUD); - p0.l = lo(SPI_BAUD); - r0.l = CONFIG_SPI_BAUD_INITBLOCK; - w[p0] = r0.l; - SSYNC; - - /* - * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable - */ - p0.h = hi(PLL_LOCKCNT); - p0.l = lo(PLL_LOCKCNT); - r0 = 0x300(Z); - w[p0] = r0.l; - ssync; - - /* - * Put SDRAM in self-refresh, incase anything is running - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITSET (R0, 24); - [P2] = R0; - SSYNC; - - /* - * Set PLL_CTL with the value that we calculate in R0 - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -check_again: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump check_again; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* - * We now are running at speed, time to set the Async mem bank wait states - * This will speed up execution, since we are normally running from FLASH. - */ - - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* - * Now, Initialize the SDRAM, - * start with the SDRAM Refresh Rate Control Register - */ - p0.l = lo(EBIU_SDRRC); - p0.h = hi(EBIU_SDRRC); - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Memory Bank Control Register - bank specific parameters - */ - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - - /* - * SDRAM Global Control Register - global programmable parameters - * Disable self-refresh - */ - P2.H = hi(EBIU_SDGCTL); - P2.L = lo(EBIU_SDGCTL); - R0 = [P2]; - BITCLR (R0, 24); - - /* - * Check if SDRAM is already powered up, if it is, enable self-refresh - */ - p0.h = hi(EBIU_SDSTAT); - p0.l = lo(EBIU_SDSTAT); - r2.l = w[p0]; - cc = bittst(r2,3); - if !cc jump skip; - NOP; - BITSET (R0, 23); -skip: - [P2] = R0; - SSYNC; - - /* Write in the new value in the register */ - R0.L = lo(mem_SDGCTL); - R0.H = hi(mem_SDGCTL); - [P2] = R0; - SSYNC; - nop; - - - (P5:0) = [SP++]; - (R7:0) = [SP++]; - RETS = [SP++]; - ASTAT = [SP++]; - RTS; diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S deleted file mode 100644 index a10eaab..0000000 --- a/cpu/bf561/interrupt.S +++ /dev/null @@ -1,244 +0,0 @@ -/* - * U-boot - interrupt.S Processing of interrupts and exception handling - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on interrupt.S - * - * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> - * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * This file is also based on exception.asm - * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define ASSEMBLY -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> - -.global _blackfin_irq_panic; - -.text -.align 2 - -#ifndef CONFIG_KGDB -.global _evt_emulation -_evt_emulation: - SAVE_CONTEXT - r0 = 0; - r1 = seqstat; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - rte; -#endif - -.global _evt_nmi -_evt_nmi: - SAVE_CONTEXT - r0 = 2; - r1 = RETN; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -_evt_nmi_exit: - rtn; - -.global _trap -_trap: - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _trap_c - sp += 12; - RESTORE_ALL_SYS - rtx; - -.global _evt_rst -_evt_rst: - SAVE_CONTEXT - r0 = 1; - r1 = RETN; - sp += -12; - call _do_reset; - sp += 12; - -_evt_rst_exit: - rtn; - -irq_panic: - r0 = 3; - r1 = sp; - sp += -12; - call _blackfin_irq_panic; - sp += 12; - -.global _evt_ivhw -_evt_ivhw: - SAVE_CONTEXT - RAISE 14; - -_evt_ivhw_exit: - rti; - -.global _evt_timer -_evt_timer: - SAVE_CONTEXT - r0 = 6; - sp += -12; - /* Polling method used now. */ - /* call timer_int; */ - sp += 12; - RESTORE_CONTEXT - rti; - nop; - -.global _evt_evt7 -_evt_evt7: - SAVE_CONTEXT - r0 = 7; - sp += -12; - call _process_int; - sp += 12; - -evt_evt7_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt8 -_evt_evt8: - SAVE_CONTEXT - r0 = 8; - sp += -12; - call _process_int; - sp += 12; - -evt_evt8_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt9 -_evt_evt9: - SAVE_CONTEXT - r0 = 9; - sp += -12; - call _process_int; - sp += 12; - -evt_evt9_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt10 -_evt_evt10: - SAVE_CONTEXT - r0 = 10; - sp += -12; - call _process_int; - sp += 12; - -evt_evt10_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt11 -_evt_evt11: - SAVE_CONTEXT - r0 = 11; - sp += -12; - call _process_int; - sp += 12; - -evt_evt11_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt12 -_evt_evt12: - SAVE_CONTEXT - r0 = 12; - sp += -12; - call _process_int; - sp += 12; -evt_evt12_exit: - RESTORE_CONTEXT - rti; - -.global _evt_evt13 -_evt_evt13: - SAVE_CONTEXT - r0 = 13; - sp += -12; - call _process_int; - sp += 12; - -evt_evt13_exit: - RESTORE_CONTEXT - rti; - -.global _evt_system_call -_evt_system_call: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_system_call_exit: - rti; - -.global _evt_soft_int1 -_evt_soft_int1: - [--sp] = r0; - [--SP] = RETI; - r0 = [sp++]; - r0 += 2; - [--sp] = r0; - RETI = [SP++]; - r0 = [SP++]; - SAVE_CONTEXT - sp += -12; - call _exception_handle; - sp += 12; - RESTORE_CONTEXT - RTI; - -evt_soft_int1_exit: - rti; diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c deleted file mode 100644 index d6aa393..0000000 --- a/cpu/bf561/ints.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - ints.c Interrupt related routines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on ints.c - * - * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin - * drivers - * - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/stddef.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/blackfin.h> -#include "cpu.h" - -void blackfin_irq_panic(int reason, struct pt_regs *regs) -{ - printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); -} - -void blackfin_init_IRQ(void) -{ - *(unsigned volatile long *)(SICA_IMASK0) = 0; -#ifndef CONFIG_KGDB - *(unsigned volatile long *)(EVT1) = 0x0; -#endif - *(unsigned volatile long *)(EVT2) = - (unsigned volatile long)evt_nmi; - *(unsigned volatile long *)(EVT3) = - (unsigned volatile long)trap; - *(unsigned volatile long *)(EVT5) = - (unsigned volatile long)evt_ivhw; - *(unsigned volatile long *)(EVT0) = - (unsigned volatile long)evt_rst; - *(unsigned volatile long *)(EVT6) = - (unsigned volatile long)evt_timer; - *(unsigned volatile long *)(EVT7) = - (unsigned volatile long)evt_evt7; - *(unsigned volatile long *)(EVT8) = - (unsigned volatile long)evt_evt8; - *(unsigned volatile long *)(EVT9) = - (unsigned volatile long)evt_evt9; - *(unsigned volatile long *)(EVT10) = - (unsigned volatile long)evt_evt10; - *(unsigned volatile long *)(EVT11) = - (unsigned volatile long)evt_evt11; - *(unsigned volatile long *)(EVT12) = - (unsigned volatile long)evt_evt12; - *(unsigned volatile long *)(EVT13) = - (unsigned volatile long)evt_evt13; - *(unsigned volatile long *)(EVT14) = - (unsigned volatile long)evt_system_call; - *(unsigned volatile long *)(EVT15) = - (unsigned volatile long)evt_soft_int1; - *(volatile unsigned long *)ILAT = 0; - asm("csync;"); - *(volatile unsigned long *)IMASK = 0xffbf; - asm("csync;"); -} - -void exception_handle(void) -{ -#if defined (CONFIG_PANIC_HANG) - display_excp(); -#else - udelay(100000); /* allow messages to go out */ - do_reset(NULL, 0, 0, NULL); -#endif -} - -void display_excp(void) -{ - printf("Exception!\n"); -} diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c deleted file mode 100644 index a398fd5..0000000 --- a/cpu/bf561/serial.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * U-boot - serial.c Serial driver for BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on blkfinserial.c - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/delay.h> -#include "serial.h" -#include <asm/io.h> -#include <asm/mach-common/bits/uart.h> - -DECLARE_GLOBAL_DATA_PTR; - -unsigned long pll_div_fact; - -void calc_baud(void) -{ - unsigned char i; - int temp; - u_long sclk = get_sclk(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - temp = sclk / (baud_table[i] * 8); - if ((temp & 0x1) == 1) { - temp++; - } - temp = temp / 2; - hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; - hw_baud_table[i].dl_low = (temp) & 0xFF; - } -} - -void serial_setbrg(void) -{ - int i; - - calc_baud(); - - for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { - if (gd->baudrate == baud_table[i]) - break; - } - - /* Enable UART */ - *pUART_GCTL |= UCEN; - SSYNC(); - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH; - SSYNC(); - - *pUART_DLL = hw_baud_table[i].dl_low; - SSYNC(); - *pUART_DLH = hw_baud_table[i].dl_high; - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER; - SSYNC(); - - /* - * Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register - */ - *pUART_IER = ELSI | ERBFI | ETBEI; - SSYNC(); - - /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; - SSYNC(); - - return; -} - -int serial_init(void) -{ - serial_setbrg(); - return (0); -} - -void serial_putc(const char c) -{ - if ((*pUART_LSR) & TEMT) { - if (c == '\n') - serial_putc('\r'); - - local_put_char(c); - } - - while (!((*pUART_LSR) & TEMT)) - SYNC_ALL; - - return; -} - -int serial_tstc(void) -{ - if (*pUART_LSR & DR) - return 1; - else - return 0; -} - -int serial_getc(void) -{ - unsigned short uart_lsr_val, uart_rbr_val; - unsigned long isr_val; - int ret; - - /* Poll for RX Interrupt */ - while (!serial_tstc()) - continue; - asm("csync;"); - - uart_lsr_val = *pUART_LSR; /* Clear status bit */ - uart_rbr_val = *pUART_RBR; /* getc() */ - - if (uart_lsr_val & (OE|PE|FE|BI)) { - ret = -1; - } else { - ret = uart_rbr_val & 0xff; - } - - return ret; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -static void local_put_char(char ch) -{ - int flags = 0; - unsigned long isr_val; - - /* Poll for TX Interruput */ - while (!(*pUART_LSR & THRE)) - continue; - asm("csync;"); - - *pUART_THR = ch; /* putc() */ - - return; -} diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h deleted file mode 100644 index 647560c..0000000 --- a/cpu/bf561/serial.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * U-boot - bf561_serial.h Serial Driver defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. - * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.h: Definitions for the BlackFin DSP serial driver. - * - * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com - * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328serial.c which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _Bf561_SERIAL_H -#define _Bf561_SERIAL_H - -#include <linux/config.h> -#include <asm/blackfin.h> - -#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") -#define ACCESS_LATCH *pUART_LCR |= DLAB; -#define ACCESS_PORT_IER *pUART_LCR &= (~DLAB); - -void serial_setbrg(void); -static void local_put_char(char ch); -void calc_baud(void); -void serial_setbrg(void); -int serial_init(void); -void serial_putc(const char c); -int serial_tstc(void); -int serial_getc(void); -void serial_puts(const char *s); -static void local_put_char(char ch); - -int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; - -struct { - unsigned char dl_high; - unsigned char dl_low; -} hw_baud_table[5]; - -#ifdef CONFIG_STAMP -extern unsigned long pll_div_fact; -#endif - -#endif diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S deleted file mode 100644 index 6565de8..0000000 --- a/cpu/bf561/start.S +++ /dev/null @@ -1,303 +0,0 @@ -/* - * U-boot - start.S Startup file of u-boot for BF533/BF561 - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Note: A change in this file subsequently requires a change in - * board/$(board_name)/config.mk for a valid u-boot.bin - */ - -#define ASSEMBLY - -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> - -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global edata; -.global _exit; -.global init_sdram; - -.text -_start: -start: -_stext: - - R0 = 0x32; - SYSCFG = R0; - SSYNC; - - /* - * As per HW reference manual DAG registers, - * DATA and Address resgister shall be zero'd - * in initialization, after a reset state - */ - r1 = 0; /* Data registers zero'd */ - r2 = 0; - r3 = 0; - r4 = 0; - r5 = 0; - r6 = 0; - r7 = 0; - - p0 = 0; /* Address registers zero'd */ - p1 = 0; - p2 = 0; - p3 = 0; - p4 = 0; - p5 = 0; - - i0 = 0; /* DAG Registers zero'd */ - i1 = 0; - i2 = 0; - i3 = 0; - m0 = 0; - m1 = 0; - m3 = 0; - m3 = 0; - l0 = 0; - l1 = 0; - l2 = 0; - l3 = 0; - b0 = 0; - b1 = 0; - b2 = 0; - b3 = 0; - - /* - * Set loop counters to zero, to make sure that - * hw loops are disabled. - */ - r0 = 0; - lc0 = r0; - lc1 = r0; - - SSYNC; - - /* Check soft reset status */ - p0.h = SWRST >> 16; - p0.l = SWRST & 0xFFFF; - r0.l = w[p0]; - - cc = bittst(r0, 15); - if !cc jump no_soft_reset; - - /* Clear Soft reset */ - r0 = 0x0000; - w[p0] = r0; - ssync; - -no_soft_reset: - nop; - - /* Clear EVT registers */ - p0.h = (EVT0 >> 16); - p0.l = (EVT0 & 0xFFFF); - p0 += 8; - p1 = 14; - r1 = 0; - LSETUP(4,4) lc0 = p1; - [ p0 ++ ] = r1; - - p0.h = hi(SICA_IWR0); - p0.l = lo(SICA_IWR0); - r0.l = 0x1; - w[p0] = r0.l; - SSYNC; - - sp.l = (0xffb01000 & 0xFFFF); - sp.h = (0xffb01000 >> 16); - - /* - * Check if the code is in SDRAM - * If the code is in SDRAM, skip SDRAM initializaiton - */ - call get_pc; - r3.l = 0x0; - r3.h = 0x2000; - cc = r0 < r3 (iu); - if cc jump sdram_initialized; - call init_sdram; - /* relocate into to RAM */ -sdram_initialized: - call get_pc; -offset: - r2.l = offset; - r2.h = offset; - r3.l = start; - r3.h = start; - r1 = r2 - r3; - - r0 = r0 - r1; - p1 = r0; - - p2.l = (CFG_MONITOR_BASE & 0xffff); - p2.h = (CFG_MONITOR_BASE >> 16); - - p3 = 0x04; - p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); - p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); -loop1: - r1 = [p1 ++ p3]; - [p2 ++ p3] = r1; - cc=p2==p4; - if !cc jump loop1; - /* - * configure STACK - */ - r0.h = (CONFIG_STACKBASE >> 16); - r0.l = (CONFIG_STACKBASE & 0xFFFF); - sp = r0; - fp = sp; - - /* - * This next section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* To keep ourselves in the supervisor mode */ - p0.l = (EVT15 & 0xFFFF); - p0.h = (EVT15 >> 16); - - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - - p0.l = (IMASK & 0xFFFF); - p0.h = (IMASK >> 16); - r0.l = LO(EVT_IVG15); - r0.h = HI(EVT_IVG15); - [p0] = r0; - raise 15; - p0.l = WAIT_HERE; - p0.h = WAIT_HERE; - reti = p0; - rti; - -WAIT_HERE: - jump WAIT_HERE; - -.global _real_start; -_real_start: - [ -- sp ] = reti; - - /* DMA reset code to Hi of L1 SRAM */ -copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ - P1.L = lo(SYSMMR_BASE); - - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ - R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA: - R6 = 0x1 (Z); - W[P1+OFFSET_(IMDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(IMDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(IMDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(IMDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(IMDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(IMDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(IMDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(IMDMA_D0_CONFIG)] = R4; - -WAIT_DMA_DONE: - p0.h = hi(IMDMA_D0_IRQ_STATUS); - p0.l = lo(IMDMA_D0_IRQ_STATUS); - R0 = W[P0](Z); - CC = BITTST(R0, 0); - if ! CC jump WAIT_DMA_DONE - - R0 = 0x1; - W[P1+OFFSET_(IMDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* Initialize BSS Section with 0 s */ - p1.l = __bss_start; - p1.h = __bss_start; - p2.l = _end; - p2.h = _end; - r1 = p1; - r2 = p2; - r3 = r2 - r1; - r3 = r3 >> 2; - p3 = r3; - lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; - CC = p2<=p1; - if CC jump _clear_bss_skip; - r0 = 0; -_clear_bss: -_clear_bss_end: - [p1++] = r0; -_clear_bss_skip: - - p0.l = _start1; - p0.h = _start1; - jump (p0); - -reset_start: - p0.h = WDOG_CNT >> 16; - p0.l = WDOG_CNT & 0xffff; - r0 = 0x0010; - w[p0] = r0; - p0.h = WDOG_CTL >> 16; - p0.l = WDOG_CTL & 0xffff; - r0 = 0x0000; - w[p0] = r0; -reset_wait: - jump reset_wait; - -reset_end: nop; - -_exit: - jump.s _exit; -get_pc: - r0 = rets; - rts; diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c deleted file mode 100644 index e35620c..0000000 --- a/cpu/bf561/traps.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/errno.h> -#include <asm/system.h> -#include <asm/traps.h> -#include "cpu.h" -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> - -void init_IRQ(void) -{ - blackfin_init_IRQ(); - return; -} - -void process_int(unsigned long vec, struct pt_regs *fp) -{ - printf("interrupt\n"); - return; -} - -extern unsigned int icplb_table[page_descriptor_table_size][2]; -extern unsigned int dcplb_table[page_descriptor_table_size][2]; - -unsigned long last_cplb_fault_retx; - -static unsigned int cplb_sizes[4] = - { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; - -void trap_c(struct pt_regs *regs) -{ - unsigned int addr; - unsigned long trapnr = (regs->seqstat) & EXCAUSE; - unsigned int i, j, size, *I0, *I1; - unsigned short data = 0; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - -#if ANOMALY_05000261 - /* - * Work around an anomaly: if we see a new DCPLB fault, return - * without doing anything. Then, if we get the same fault again, - * handle it. - */ - addr = last_cplb_fault_retx; - last_cplb_fault_retx = regs->retx; - printf("this time, curr = 0x%08x last = 0x%08x\n", addr, - last_cplb_fault_retx); - if (addr != last_cplb_fault_retx) - goto trap_c_return; -#endif - data = 1; - - case VEC_CPLB_I_M: - - if (data) - addr = *pDCPLB_FAULT_ADDR; - else - addr = *pICPLB_FAULT_ADDR; - - for (i = 0; i < page_descriptor_table_size; i++) { - if (data) { - size = cplb_sizes[dcplb_table[i][1] >> 16]; - j = dcplb_table[i][0]; - } else { - size = cplb_sizes[icplb_table[i][1] >> 16]; - j = icplb_table[i][0]; - } - if ((j <= addr) && ((j + size) > addr)) { - debug("found %i 0x%08x\n", i, j); - break; - } - } - if (i == page_descriptor_table_size) { - printf("something is really wrong\n"); - do_reset(NULL, 0, 0, NULL); - } - - /* Turn the cache off */ - if (data) { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL &= - ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); - } - - if (data) { - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - j = 0; - while (*I1 & CPLB_LOCK) { - debug("skipping %i %08p - %08x\n", j, I1, *I1); - *I0++; - *I1++; - j++; - } - - debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); - - for (; j < 15; j++) { - debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); - *I0++ = *(I0 + 1); - *I1++ = *(I1 + 1); - } - - if (data) { - *I0 = dcplb_table[i][0]; - *I1 = dcplb_table[i][1]; - I0 = (unsigned int *)DCPLB_ADDR0; - I1 = (unsigned int *)DCPLB_DATA0; - } else { - *I0 = icplb_table[i][0]; - *I1 = icplb_table[i][1]; - I0 = (unsigned int *)ICPLB_ADDR0; - I1 = (unsigned int *)ICPLB_DATA0; - } - - for (j = 0; j < 16; j++) { - debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); - } - - /* Turn the cache back on */ - if (data) { - j = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)DMEM_CONTROL = - ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; - SSYNC(); - } else { - SSYNC(); - asm(" .align 8; "); - *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); - } - - break; - default: - /* All traps come here */ - printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int)regs); - printf("bad PC=0x%04x\n", (unsigned int)regs->pc); - dump(regs); - printf("\n\n"); - - printf("Unhandled IRQ or exceptions!\n"); - printf("Please reset the board \n"); - do_reset(NULL, 0, 0, NULL); - } - -trap_c_return: - return; - -} - -void dump(struct pt_regs *fp) -{ - debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", fp->rete, - fp->retn, fp->retx, fp->rets); - debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); - debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); - debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", fp->r0, - fp->r1, fp->r2, fp->r3); - debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", fp->r4, - fp->r5, fp->r6, fp->r7); - debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", fp->p0, - fp->p1, fp->p2, fp->p3); - debug("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp); - debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, - fp->lc0); - debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, - fp->lc1); - debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0, - fp->m0, fp->i0); - debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1, - fp->m1, fp->i1); - debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2, - fp->m2, fp->i2); - debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3, - fp->m3, fp->i3); - - debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); - debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); - -} diff --git a/cpu/bf561/video.c b/cpu/bf561/video.c deleted file mode 100644 index 3ff0151..0000000 --- a/cpu/bf561/video.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * (C) Copyright 2006 - * Aubrey Li, aubrey.li@analog.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <asm/blackfin.h> -#include <i2c.h> -#include <linux/types.h> -#include <devices.h> - -#ifdef CONFIG_VIDEO -#define NTSC_FRAME_ADDR 0x06000000 -#include "video.h" - -/* NTSC OUTPUT SIZE 720 * 240 */ -#define VERTICAL 2 -#define HORIZONTAL 4 - -int is_vblank_line(const int line) -{ - /* - * This array contains a single bit for each line in - * an NTSC frame. - */ - if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) - return true; - - return false; -} - -int NTSC_framebuffer_init(char *base_address) -{ - const int NTSC_frames = 1; - const int NTSC_lines = 525; - char *dest = base_address; - int frame_num, line_num; - - for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { - for (line_num = 1; line_num <= NTSC_lines; ++line_num) { - unsigned int code; - int offset = 0; - int i; - - if (is_vblank_line(line_num)) - offset++; - - if (line_num > 266 || line_num < 3) - offset += 2; - - /* Output EAV code */ - code = SystemCodeMap[offset].EAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output horizontal blanking */ - for (i = 0; i < 67 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - - /* Output SAV */ - code = SystemCodeMap[offset].SAV; - write_dest_byte((char)(code >> 24) & 0xff); - write_dest_byte((char)(code >> 16) & 0xff); - write_dest_byte((char)(code >> 8) & 0xff); - write_dest_byte((char)(code) & 0xff); - - /* Output empty horizontal data */ - for (i = 0; i < 360 * 2; ++i) { - write_dest_byte(0x80); - write_dest_byte(0x10); - } - } - } - - return dest - base_address; -} - -void fill_frame(char *Frame, int Value) -{ - int *OddPtr32; - int OddLine; - int *EvenPtr32; - int EvenLine; - int i; - int *data; - int m, n; - - /* fill odd and even frames */ - for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { - OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); - EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); - for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { - *OddPtr32 = Value; - *EvenPtr32 = Value; - } - } - - for (m = 0; m < VERTICAL; m++) { - data = (int *)u_boot_logo.data; - for (OddLine = (22 + m), EvenLine = (285 + m); - OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); - OddLine += VERTICAL, EvenLine += VERTICAL) { - OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); - EvenPtr32 = - (int *)((Frame + ((EvenLine) * 1716)) + 276); - for (i = 0; i < u_boot_logo.width / 2; i++) { - /* enlarge one pixel to m x n */ - for (n = 0; n < HORIZONTAL; n++) { - *OddPtr32++ = *data; - *EvenPtr32++ = *data; - } - data++; - } - } - } -} - -void video_putc(const char c) -{ -} - -void video_puts(const char *s) -{ -} - -static int video_init(void) -{ - char *NTSCFrame; - NTSCFrame = (char *)NTSC_FRAME_ADDR; - NTSC_framebuffer_init(NTSCFrame); - fill_frame(NTSCFrame, BLUE); - - *pPPI_CONTROL = 0x0082; - *pPPI_FRAME = 0x020D; - - *pDMA0_START_ADDR = NTSCFrame; - *pDMA0_X_COUNT = 0x035A; - *pDMA0_X_MODIFY = 0x0002; - *pDMA0_Y_COUNT = 0x020D; - *pDMA0_Y_MODIFY = 0x0002; - *pDMA0_CONFIG = 0x1015; - *pPPI_CONTROL = 0x0083; - return 0; -} - -int drv_video_init(void) -{ - int error, devices = 1; - - device_t videodev; - - video_init(); /* Video initialization */ - - memset(&videodev, 0, sizeof(videodev)); - - strcpy(videodev.name, "video"); - videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = device_register(&videodev); - - return (error == 0) ? devices : error; -} -#endif diff --git a/cpu/bf561/video.h b/cpu/bf561/video.h deleted file mode 100644 index d237f6a..0000000 --- a/cpu/bf561/video.h +++ /dev/null @@ -1,25 +0,0 @@ -#include <video_logo.h> -#define write_dest_byte(val) {*dest++=val;} -#define BLACK (0x01800180) /* black pixel pattern */ -#define BLUE (0x296E29F0) /* blue pixel pattern */ -#define RED (0x51F0515A) /* red pixel pattern */ -#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ -#define GREEN (0x91229136) /* green pixel pattern */ -#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ -#define YELLOW (0xD292D210) /* yellow pixel pattern */ -#define WHITE (0xFE80FE80) /* white pixel pattern */ - -#define true 1 -#define false 0 - -typedef struct { - unsigned int SAV; - unsigned int EAV; -} SystemCodeType; - -const SystemCodeType SystemCodeMap[4] = { - {0xFF000080, 0xFF00009D}, - {0xFF0000AB, 0xFF0000B6}, - {0xFF0000C7, 0xFF0000DA}, - {0xFF0000EC, 0xFF0000F1} -}; diff --git a/cpu/blackfin/.gitignore b/cpu/blackfin/.gitignore new file mode 100644 index 0000000..0ec9d56 --- /dev/null +++ b/cpu/blackfin/.gitignore @@ -0,0 +1 @@ +bootrom-asm-offsets.[chs] diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile new file mode 100644 index 0000000..f194a38 --- /dev/null +++ b/cpu/blackfin/Makefile @@ -0,0 +1,65 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Licensed under the GPL-2 or later. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +EXTRA := +CEXTRA := initcode.o +SEXTRA := start.o +SOBJS := interrupt.o cache.o flush.o +COBJS := cpu.o traps.o interrupts.o reset.o serial.o i2c.o watchdog.o + +ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) +COBJS += initcode.o +endif + +SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +EXTRA := $(addprefix $(obj),$(EXTRA)) +CEXTRA := $(addprefix $(obj),$(CEXTRA)) +SEXTRA := $(addprefix $(obj),$(SEXTRA)) + +all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +$(OBJS): $(obj)bootrom-asm-offsets.h +$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk + echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp + mv $@.tmp $@ +$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c + $(CC) $(CFLAGS) -S $^ -o $@.tmp + mv $@.tmp $@ +$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s + sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@ + +# make sure our initcode (which goes into LDR) does not +# have relocs or external references +READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $< +check_initcode: $(obj)initcode.o +ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) + @if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \ + echo "$< contains external references!" 1>&2 ; \ + exit 1 ; \ + fi +endif + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/blackfin/bootrom-asm-offsets.awk b/cpu/blackfin/bootrom-asm-offsets.awk new file mode 100755 index 0000000..1d61824 --- /dev/null +++ b/cpu/blackfin/bootrom-asm-offsets.awk @@ -0,0 +1,41 @@ +#!/usr/bin/gawk -f +BEGIN { + print "/* DO NOT EDIT: AUTOMATICALLY GENERATED" + print " * Input files: bootrom-asm-offsets.awk bootrom-asm-offsets.c.in" + print " * DO NOT EDIT: AUTOMATICALLY GENERATED" + print " */" + print "" + system("cat bootrom-asm-offsets.c.in") + print "{" +} + +{ + /* find a structure definition */ + if ($0 ~ /typedef struct .* {/) { + delete members; + i = 0; + + /* extract each member of the structure */ + while (1) { + getline + if ($1 == "}") + break; + gsub(/[*;]/, ""); + members[i++] = $NF; + } + + /* grab the structure's name */ + struct = $NF; + sub(/;$/, "", struct); + + /* output the DEFINE() macros */ + while (i-- > 0) + print "\tDEFINE(" struct ", " members[i] ");" + print "" + } +} + +END { + print "\treturn 0;" + print "}" +} diff --git a/cpu/blackfin/bootrom-asm-offsets.c.in b/cpu/blackfin/bootrom-asm-offsets.c.in new file mode 100644 index 0000000..3146e46 --- /dev/null +++ b/cpu/blackfin/bootrom-asm-offsets.c.in @@ -0,0 +1,12 @@ +/* A little trick taken from the kernel asm-offsets.h where we convert + * the C structures automatically into a bunch of defines for use in + * the assembly files. + */ + +#include <linux/stddef.h> +#include <asm/mach-common/bits/bootrom.h> + +#define _DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) +#define DEFINE(s, m) _DEFINE(offset_##s##_##m, offsetof(s, m)) + +int main(int argc, char *argv[]) diff --git a/cpu/blackfin/cache.S b/cpu/blackfin/cache.S new file mode 100644 index 0000000..51bdb30 --- /dev/null +++ b/cpu/blackfin/cache.S @@ -0,0 +1,61 @@ +/* cache.S - low level cache handling routines + * Copyright (C) 2003-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <asm/linkage.h> +#include <config.h> +#include <asm/blackfin.h> + +.text +.align 2 +ENTRY(_blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_icache_flush_range) + +ENTRY(_blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_dcache_flush_range) + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; +ENDPROC(_blackfin_dcache_invalidate_range) diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c new file mode 100644 index 0000000..53de5ab --- /dev/null +++ b/cpu/blackfin/cpu.c @@ -0,0 +1,141 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/mpu.h> +#include <asm/mach-common/bits/trace.h> + +#include "cpu.h" +#include "serial.h" + +void icache_enable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() | (IMC | ENICPLB)); + SSYNC(); +} + +void icache_disable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() & ~(IMC | ENICPLB)); + SSYNC(); +} + +int icache_status(void) +{ + return bfin_read_IMEM_CONTROL() & ENICPLB; +} + +void dcache_enable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() | (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +void dcache_disable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +int dcache_status(void) +{ + return bfin_read_DMEM_CONTROL() & ENDCPLB; +} + +__attribute__ ((__noreturn__)) +void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) +{ + /* Build a NOP slide over the LDR jump block. Whee! */ + serial_early_puts("NOP Slide\n"); + char nops[0xC]; + memset(nops, 0x00, sizeof(nops)); + extern char _stext_l1; + memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops)); + + if (!loaded_from_ldr) { + /* Relocate sections into L1 if the LDR didn't do it -- don't + * check length because the linker script does the size + * checking at build time. + */ + serial_early_puts("L1 Relocate\n"); + extern char _stext_l1, _etext_l1, _stext_l1_lma; + memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1)); + extern char _sdata_l1, _edata_l1, _sdata_l1_lma; + memcpy(&_sdata_l1, &_sdata_l1_lma, (&_edata_l1 - &_sdata_l1)); + } +#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + /* The BF537 bootrom will reset the EBIU_AMGCTL register on us + * after it has finished loading the LDR. So configure it again. + */ + else + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); +#endif + +#ifdef CONFIG_DEBUG_DUMP + /* Turn on hardware trace buffer */ + bfin_write_TBUFCTL(TBUFPWR | TBUFEN); +#endif + +#ifndef CONFIG_PANIC_HANG + /* Reset upon a double exception rather than just hanging. + * Do not do bfin_read on SWRST as that will reset status bits. + */ + bfin_write_SWRST(DOUBLE_FAULT); +#endif + + serial_early_puts("Board init flash\n"); + board_init_f(bootflag); +} + +int exception_init(void) +{ + bfin_write_EVT3(trap); + return 0; +} + +int irq_init(void) +{ +#ifdef SIC_IMASK0 + bfin_write_SIC_IMASK0(0); + bfin_write_SIC_IMASK1(0); +# ifdef SIC_IMASK2 + bfin_write_SIC_IMASK2(0); +# endif +#elif defined(SICA_IMASK0) + bfin_write_SICA_IMASK0(0); + bfin_write_SICA_IMASK1(0); +#else + bfin_write_SIC_IMASK(0); +#endif + bfin_write_EVT2(evt_default); /* NMI */ + bfin_write_EVT5(evt_default); /* hardware error */ + bfin_write_EVT6(evt_default); /* core timer */ + bfin_write_EVT7(evt_default); + bfin_write_EVT8(evt_default); + bfin_write_EVT9(evt_default); + bfin_write_EVT10(evt_default); + bfin_write_EVT11(evt_default); + bfin_write_EVT12(evt_default); + bfin_write_EVT13(evt_default); + bfin_write_EVT14(evt_default); + bfin_write_EVT15(evt_default); + bfin_write_ILAT(0); + CSYNC(); + /* enable all interrupts except for core timer */ + irq_flags = 0xffffffbf; + local_irq_enable(); + CSYNC(); + return 0; +} diff --git a/cpu/bf561/start1.S b/cpu/blackfin/cpu.h index 6d4731b..0a13c28 100644 --- a/cpu/bf561/start1.S +++ b/cpu/blackfin/cpu.h @@ -1,7 +1,7 @@ /* - * U-boot - start1.S Code running out of RAM after relocation + * U-boot - cpu.h * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -22,17 +22,17 @@ * MA 02110-1301 USA */ -#define ASSEMBLY -#include <linux/config.h> -#include <config.h> -#include <asm/blackfin.h> +#ifndef _CPU_H_ +#define _CPU_H_ -.global start1; -.global _start1; +#include <command.h> -.text -_start1: -start1: - sp += -12; - call _board_init_f; - sp += 12; +void board_reset(void) __attribute__((__weak__)); +void bfin_reset_or_hang(void) __attribute__((__noreturn__)); +void bfin_panic(struct pt_regs *reg); +void dump(struct pt_regs *regs); + +asmlinkage void trap(void); +asmlinkage void evt_default(void); + +#endif diff --git a/cpu/blackfin/flush.S b/cpu/blackfin/flush.S new file mode 100644 index 0000000..8072b86 --- /dev/null +++ b/cpu/blackfin/flush.S @@ -0,0 +1,230 @@ +/* flush.S - low level cache flushing routines + * Copyright (C) 2003-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/mpu.h> + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(_flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = HI(DCPLB_ADDR0); + P5.L = LO(DCPLB_ADDR0); + P4.H = HI(DCPLB_DATA0); + P4.L = LO(DCPLB_DATA0); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +.Lnext: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP .Lskip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP .Lskip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL _dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +.Lskip: R6 += -1; + CC = R6; + IF CC JUMP .Lnext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; +ENDPROC(_flush_data_cache) + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP .Ldflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = LO(DMEM_CONTROL); + P0.H = HI(DMEM_CONTROL); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP .Lbank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +.Lbank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = LO(DTEST_COMMAND); + P5.H = HI(DTEST_COMMAND); + P4.L = LO(DTEST_DATA0); + P4.H = HI(DTEST_DATA0); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (.Lfs1, .Lfe1) LC1 = P2; +.Lfs1: P0 = 64; /* iterate over all sets*/ + LSETUP (.Lfs0, .Lfe0) LC0 = P0; +.Lfs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP .Lfskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP .Lfskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP .Lfskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +.Lfskip: +.Lfe0: R5 += 1; /* Advance to next Set*/ +.Lfe1: BITSET(R2, 26); /* Go to next Way.*/ + +.Ldfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +.Ldflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (.Leall, .Leall) LC0 = P1; +.Leall: FLUSHINV [P0++]; + SSYNC; + JUMP .Ldfinished; +ENDPROC(_dcplb_flush) + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf537/i2c.c b/cpu/blackfin/i2c.c index ab7dd38..47be258 100644 --- a/cpu/bf537/i2c.c +++ b/cpu/blackfin/i2c.c @@ -1,18 +1,10 @@ -/**************************************************************** - * $ID: i2c.c 24 Oct 2006 12:00:00 +0800 $ * - * * - * Description: * - * * - * Maintainer: sonicz <sonic.zhang@analog.com> * - * * - * CopyRight (c) 2006 Analog Device * - * All rights reserved. * - * * - * This file is free software; * - * you are free to modify and/or redistribute it * - * under the terms of the GNU General Public Licence (GPL).* - * * - ****************************************************************/ +/* + * i2c.c - driver for Blackfin on-chip TWI/I2C + * + * Copyright (c) 2006-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #include <common.h> @@ -23,10 +15,45 @@ #include <asm/io.h> #include <asm/mach-common/bits/twi.h> -DECLARE_GLOBAL_DATA_PTR; +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#ifdef TWI0_CLKDIV +#define bfin_read_TWI_CLKDIV() bfin_read_TWI0_CLKDIV() +#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val) +#define bfin_read_TWI_CONTROL() bfin_read_TWI0_CONTROL() +#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read_TWI0_SLAVE_CTL() +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write_TWI0_SLAVE_CTL(val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read_TWI0_SLAVE_STAT() +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write_TWI0_SLAVE_STAT(val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read_TWI0_SLAVE_ADDR() +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write_TWI0_SLAVE_ADDR(val) +#define bfin_read_TWI_MASTER_CTL() bfin_read_TWI0_MASTER_CTL() +#define bfin_write_TWI_MASTER_CTL(val) bfin_write_TWI0_MASTER_CTL(val) +#define bfin_read_TWI_MASTER_STAT() bfin_read_TWI0_MASTER_STAT() +#define bfin_write_TWI_MASTER_STAT(val) bfin_write_TWI0_MASTER_STAT(val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read_TWI0_MASTER_ADDR() +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val) +#define bfin_read_TWI_INT_STAT() bfin_read_TWI0_INT_STAT() +#define bfin_write_TWI_INT_STAT(val) bfin_write_TWI0_INT_STAT(val) +#define bfin_read_TWI_INT_MASK() bfin_read_TWI0_INT_MASK() +#define bfin_write_TWI_INT_MASK(val) bfin_write_TWI0_INT_MASK(val) +#define bfin_read_TWI_FIFO_CTL() bfin_read_TWI0_FIFO_CTL() +#define bfin_write_TWI_FIFO_CTL(val) bfin_write_TWI0_FIFO_CTL(val) +#define bfin_read_TWI_FIFO_STAT() bfin_read_TWI0_FIFO_STAT() +#define bfin_write_TWI_FIFO_STAT(val) bfin_write_TWI0_FIFO_STAT(val) +#define bfin_read_TWI_XMT_DATA8() bfin_read_TWI0_XMT_DATA8() +#define bfin_write_TWI_XMT_DATA8(val) bfin_write_TWI0_XMT_DATA8(val) +#define bfin_read_TWI_XMT_DATA_16() bfin_read_TWI0_XMT_DATA16() +#define bfin_write_TWI_XMT_DATA16(val) bfin_write_TWI0_XMT_DATA16(val) +#define bfin_read_TWI_RCV_DATA8() bfin_read_TWI0_RCV_DATA8() +#define bfin_write_TWI_RCV_DATA8(val) bfin_write_TWI0_RCV_DATA8(val) +#define bfin_read_TWI_RCV_DATA16() bfin_read_TWI0_RCV_DATA16() +#define bfin_write_TWI_RCV_DATA16(val) bfin_write_TWI0_RCV_DATA16(val) +#endif #ifdef DEBUG_I2C #define PRINTD(fmt,args...) do { \ + DECLARE_GLOBAL_DATA_PTR; \ if (gd->have_console) \ printf(fmt ,##args); \ } while (0) @@ -50,14 +77,12 @@ struct i2c_msg { /** * i2c_reset: - reset the host controller - * */ - static void i2c_reset(void) { /* Disable TWI */ bfin_write_TWI_CONTROL(0); - sync(); + SSYNC(); /* Set TWI internal clock as 10MHz */ bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); @@ -74,7 +99,7 @@ static void i2c_reset(void) /* Enable TWI */ bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); - sync(); + SSYNC(); } int wait_for_completion(struct i2c_msg *msg, int timeout_count) @@ -95,10 +120,10 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } else if (msg->flags & I2C_M_STOP) bfin_write_TWI_MASTER_CTL (bfin_read_TWI_MASTER_CTL() | STOP); - sync(); + SSYNC(); /* Clear status */ bfin_write_TWI_INT_STAT(XMTSERV); - sync(); + SSYNC(); i = 0; } if (RCVSERV & twi_int_stat) { @@ -109,11 +134,11 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } else if (msg->flags & I2C_M_STOP) { bfin_write_TWI_MASTER_CTL (bfin_read_TWI_MASTER_CTL() | STOP); - sync(); + SSYNC(); } /* Clear interrupt source */ bfin_write_TWI_INT_STAT(RCVSERV); - sync(); + SSYNC(); i = 0; } if (MERR & twi_int_stat) { @@ -121,7 +146,7 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_STAT(0x3e); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); /* * if both err and complete int stats are set, * return proper results. @@ -130,7 +155,7 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) bfin_write_TWI_INT_STAT(MCOMP); bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); /* * If it is a quick transfer, * only address bug no data, not an err. @@ -150,10 +175,10 @@ int wait_for_completion(struct i2c_msg *msg, int timeout_count) } if (MCOMP & twi_int_stat) { bfin_write_TWI_INT_STAT(MCOMP); - sync(); + SSYNC(); bfin_write_TWI_INT_MASK(0); bfin_write_TWI_MASTER_CTL(0); - sync(); + SSYNC(); return 0; } } @@ -187,7 +212,8 @@ int i2c_transfer(struct i2c_msg *msg) goto transfer_error; } - while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) ; + while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) + continue; /* Set Transmit device address */ bfin_write_TWI_MASTER_ADDR(msg->addr); @@ -197,9 +223,9 @@ int i2c_transfer(struct i2c_msg *msg) * Data in FIFO should be discarded before start a new operation. */ bfin_write_TWI_FIFO_CTL(0x3); - sync(); + SSYNC(); bfin_write_TWI_FIFO_CTL(0); - sync(); + SSYNC(); if (!(msg->flags & I2C_M_RD)) { /* Transmit first data */ @@ -208,7 +234,7 @@ int i2c_transfer(struct i2c_msg *msg) len); bfin_write_TWI_XMT_DATA8(*(msg->buf++)); msg->len--; - sync(); + SSYNC(); } } @@ -218,7 +244,7 @@ int i2c_transfer(struct i2c_msg *msg) /* Interrupt mask . Enable XMT, RCV interrupt */ bfin_write_TWI_INT_MASK(MCOMP | MERR | ((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV)); - sync(); + SSYNC(); if (len > 0 && len <= 255) bfin_write_TWI_MASTER_CTL((len << 6)); @@ -233,12 +259,12 @@ int i2c_transfer(struct i2c_msg *msg) ((msg->flags & I2C_M_RD) ? MDIR : 0) | ((CONFIG_TWICLK_KHZ > 100) ? FAST : 0)); - sync(); + SSYNC(); ret = wait_for_completion(msg, timeout_count); PRINTD("3 in i2c_transfer: ret=%d\n", ret); -transfer_error: + transfer_error: switch (ret) { case 1: PRINTD(("i2c_transfer: error: transfer fail\n")); @@ -415,4 +441,4 @@ void i2c_reg_write(uchar chip, uchar reg, uchar val) i2c_write(chip, reg, 0, &val, 1); } -#endif /* CONFIG_HARD_I2C */ +#endif /* CONFIG_HARD_I2C */ diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c new file mode 100644 index 0000000..ffc8420 --- /dev/null +++ b/cpu/blackfin/initcode.c @@ -0,0 +1,353 @@ +/* + * initcode.c - Initialize the processor. This is usually entails things + * like external memory, voltage regulators, etc... Note that this file + * cannot make any function calls as it may be executed all by itself by + * the Blackfin's bootrom in LDR format. + * + * Copyright (c) 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/bootrom.h> +#include <asm/mach-common/bits/ebiu.h> +#include <asm/mach-common/bits/pll.h> +#include <asm/mach-common/bits/uart.h> + +#define BFIN_IN_INITCODE +#include "serial.h" + +__attribute__((always_inline)) +static inline uint32_t serial_init(void) +{ +#ifdef __ADSPBF54x__ +# ifdef BFIN_BOOT_UART_USE_RTS +# define BFIN_UART_USE_RTS 1 +# else +# define BFIN_UART_USE_RTS 0 +# endif + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { + size_t i; + + /* force RTS rather than relying on auto RTS */ + bfin_write_UART1_MCR(bfin_read_UART1_MCR() | FCPOL); + + /* Wait for the line to clear up. We cannot rely on UART + * registers as none of them reflect the status of the RSR. + * Instead, we'll sleep for ~10 bit times at 9600 baud. + * We can precalc things here by assuming boot values for + * PLL rather than loading registers and calculating. + * baud = SCLK / (16 ^ (1 - EDBO) * Divisor) + * EDB0 = 0 + * Divisor = (SCLK / baud) / 16 + * SCLK = baud * 16 * Divisor + * SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5 + * CCLK = (16 * Divisor * 5) * (9600 / 10) + * In reality, this will probably be just about 1 second delay, + * so assuming 9600 baud is OK (both as a very low and too high + * speed as this will buffer things enough). + */ +#define _NUMBITS (10) /* how many bits to delay */ +#define _LOWBAUD (9600) /* low baud rate */ +#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */ +#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */ +#define _NUMINS (3) /* how many instructions in loop */ +#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS) + i = _CCLK; + while (i--) + asm volatile("" : : : "memory"); + } +#endif + + uint32_t old_baud = serial_early_get_baud(); + + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_early_init(); + + /* If the UART is off, that means we need to program + * the baud rate ourselves initially. + */ + if (!old_baud) { + old_baud = CONFIG_BAUDRATE; + serial_early_set_baud(CONFIG_BAUDRATE); + } + } + + return old_baud; +} + +__attribute__((always_inline)) +static inline void serial_deinit(void) +{ +#ifdef __ADSPBF54x__ + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { + /* clear forced RTS rather than relying on auto RTS */ + bfin_write_UART1_MCR(bfin_read_UART1_MCR() & ~FCPOL); + } +#endif +} + +/* We need to reset the baud rate when we have early debug turned on + * or when we are booting over the UART. + * XXX: we should fix this to calc the old baud and restore it rather + * than hardcoding it via CONFIG_LDR_LOAD_BAUD ... but we have + * to figure out how to avoid the division in the baud calc ... + */ +__attribute__((always_inline)) +static inline void serial_reset_baud(uint32_t baud) +{ + if (!BFIN_DEBUG_EARLY_SERIAL && CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) + return; + +#ifndef CONFIG_LDR_LOAD_BAUD +# define CONFIG_LDR_LOAD_BAUD 115200 +#endif + + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) + serial_early_set_baud(baud); + else if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) + serial_early_set_baud(CONFIG_LDR_LOAD_BAUD); + else + serial_early_set_baud(CONFIG_BAUDRATE); +} + +__attribute__((always_inline)) +static inline void serial_putc(char c) +{ + if (!BFIN_DEBUG_EARLY_SERIAL) + return; + + if (c == '\n') + *pUART_THR = '\r'; + + *pUART_THR = c; + + while (!(*pUART_LSR & TEMT)) + continue; +} + + +/* Max SCLK can be 133MHz ... dividing that by 4 gives + * us a freq of 33MHz for SPI which should generally be + * slow enough for the slow reads the bootrom uses. + */ +#ifndef CONFIG_SPI_BAUD_INITBLOCK +# define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +/* PLL_DIV defines */ +#ifndef CONFIG_PLL_DIV_VAL +# if (CONFIG_CCLK_DIV == 1) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# elif (CONFIG_CCLK_DIV == 2) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# elif (CONFIG_CCLK_DIV == 4) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# elif (CONFIG_CCLK_DIV == 8) +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# else +# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +# endif +# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV) +#endif + +#ifndef CONFIG_PLL_LOCKCNT_VAL +# define CONFIG_PLL_LOCKCNT_VAL 0x0300 +#endif + +#ifndef CONFIG_PLL_CTL_VAL +# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9)) +#endif + +#ifndef CONFIG_EBIU_RSTCTL_VAL +# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ +#endif + +#ifndef CONFIG_EBIU_MBSCTL_VAL +# define CONFIG_EBIU_MBSCTL_VAL 0 +#endif + +/* Make sure our voltage value is sane so we don't blow up! */ +#ifndef CONFIG_VR_CTL_VAL +# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV) +# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) +# define CCLK_VLEV_120 400000000 +# define CCLK_VLEV_125 533000000 +# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) +# define CCLK_VLEV_120 401000000 +# define CCLK_VLEV_125 401000000 +# elif defined(__ADSPBF561__) +# define CCLK_VLEV_120 300000000 +# define CCLK_VLEV_125 501000000 +# endif +# if BFIN_CCLK < CCLK_VLEV_120 +# define CONFIG_VR_CTL_VLEV VLEV_120 +# elif BFIN_CCLK < CCLK_VLEV_125 +# define CONFIG_VR_CTL_VLEV VLEV_125 +# else +# define CONFIG_VR_CTL_VLEV VLEV_130 +# endif +# if defined(__ADSPBF52x__) /* TBD; use default */ +# undef CONFIG_VR_CTL_VLEV +# define CONFIG_VR_CTL_VLEV VLEV_110 +# elif defined(__ADSPBF54x__) /* TBD; use default */ +# undef CONFIG_VR_CTL_VLEV +# define CONFIG_VR_CTL_VLEV VLEV_120 +# endif + +# ifdef CONFIG_BFIN_MAC +# define CONFIG_VR_CTL_CLKBUF CLKBUFOE +# else +# define CONFIG_VR_CTL_CLKBUF 0 +# endif + +# if defined(__ADSPBF52x__) +# define CONFIG_VR_CTL_FREQ FREQ_1000 +# else +# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000) +# endif + +# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ) +#endif + +__attribute__((saveall)) +void initcode(ADI_BOOT_DATA *bootstruct) +{ + uint32_t old_baud = serial_init(); + +#ifdef CONFIG_HW_WATCHDOG +# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE +# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000 +# endif + /* Program the watchdog with an initial timeout of ~20 seconds. + * Hopefully that should be long enough to load the u-boot LDR + * (from wherever) and then the common u-boot code can take over. + * In bypass mode, the start.S would have already set a much lower + * timeout, so don't clobber that. + */ + if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { + bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); + bfin_write_WDOG_CTL(0); + } +#endif + + serial_putc('S'); + + /* Blackfin bootroms use the SPI slow read opcode instead of the SPI + * fast read, so we need to slow down the SPI clock a lot more during + * boot. Once we switch over to u-boot's SPI flash driver, we'll + * increase the speed appropriately. + */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#ifdef SPI0_BAUD + bfin_write_SPI0_BAUD(CONFIG_SPI_BAUD_INITBLOCK); +#else + bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); +#endif + + serial_putc('B'); + + /* Disable all peripheral wakeups except for the PLL event. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(1); + bfin_write_SIC_IWR1(0); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(0); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(1); + bfin_write_SICA_IWR1(0); +#else + bfin_write_SIC_IWR(1); +#endif + + serial_putc('L'); + + bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); + + serial_putc('A'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + serial_putc('!'); + bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); + asm("idle;"); + } + + serial_putc('C'); + + bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); + + serial_putc('K'); + + /* Only reprogram when needed to avoid triggering unnecessary + * PLL relock sequences. + */ + if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { + serial_putc('!'); + bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); + asm("idle;"); + } + + /* Since we've changed the SCLK above, we may need to update + * the UART divisors (UART baud rates are based on SCLK). + */ + serial_reset_baud(old_baud); + + serial_putc('F'); + + /* Program the async banks controller. */ + bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); + bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + +#ifdef EBIU_MODE + /* Not all parts have these additional MMRs. */ + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); +#endif + + serial_putc('I'); + + /* Program the external memory controller. */ +#ifdef EBIU_RSTCTL + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); + bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); + bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL); + bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL); +# ifdef CONFIG_EBIU_DDRCTL3_VAL + /* default is disable, so don't need to force this */ + bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); +# endif +#else + bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); + bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); + bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +#endif + + serial_putc('N'); + + /* Restore all peripheral wakeups. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(-1); + bfin_write_SIC_IWR1(-1); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(-1); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(-1); + bfin_write_SICA_IWR1(-1); +#else + bfin_write_SIC_IWR(-1); +#endif + + serial_putc('>'); + serial_putc('\n'); + + serial_deinit(); +} diff --git a/cpu/blackfin/interrupt.S b/cpu/blackfin/interrupt.S new file mode 100644 index 0000000..dd2cc53 --- /dev/null +++ b/cpu/blackfin/interrupt.S @@ -0,0 +1,33 @@ +/* + * interrupt.S - trampoline default exceptions/interrupts to C handlers + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> +#include <asm/entry.h> + +.text + +/* default entry point for exceptions */ +ENTRY(_trap) + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c; + sp += 12; + RESTORE_ALL_SYS + rtx; +ENDPROC(_trap) + +/* default entry point for interrupts */ +ENTRY(_evt_default) + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _bfin_panic; + sp += 12; + RESTORE_ALL_SYS + rti; +ENDPROC(_evt_default) diff --git a/cpu/bf561/interrupts.c b/cpu/blackfin/interrupts.c index 7880061..80c5505 100644 --- a/cpu/bf561/interrupts.c +++ b/cpu/blackfin/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005-2007 Analog Devices Inc. + * Copyright (c) 2005-2008 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -14,24 +14,8 @@ * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <common.h> @@ -49,7 +33,7 @@ int irq_flags; /* needed by asm-blackfin/system.h */ /* * This function is derived from PowerPC code (read timebase as long long). - * On BF561 it just returns the timer value. + * On Blackfin it just returns the timer value. */ unsigned long long get_ticks(void) { @@ -58,7 +42,7 @@ unsigned long long get_ticks(void) /* * This function is derived from PowerPC code (timebase clock frequency). - * On BF561 it returns the number of timer ticks per second. + * On Blackfin it returns the number of timer ticks per second. */ ulong get_tbclk(void) { @@ -70,18 +54,15 @@ ulong get_tbclk(void) void enable_interrupts(void) { + local_irq_restore(int_flag); } int disable_interrupts(void) { + local_irq_save(int_flag); return 1; } -int interrupt_init(void) -{ - return (0); -} - void udelay(unsigned long usec) { unsigned long delay, start, stop; @@ -101,16 +82,17 @@ void udelay(unsigned long usec) usec -= 1000; } - asm volatile (" %0 = CYCLES;":"=r" (start)); + asm volatile (" %0 = CYCLES;" : "=r" (start)); do { - asm volatile (" %0 = CYCLES; ":"=r" (stop)); + asm volatile (" %0 = CYCLES; " : "=r" (stop)); } while (stop - start < delay); } return; } -void timer_init(void) +#define MAX_TIM_LOAD 0xFFFFFFFF +int timer_init(void) { *pTCNTL = 0x1; *pTSCALE = 0x0; @@ -121,6 +103,8 @@ void timer_init(void) timestamp = 0; last_time = 0; + + return 0; } /* @@ -157,11 +141,15 @@ ulong get_timer(ulong base) milisec = clocks / (CONFIG_CCLK_HZ / 1000); /* - * Find the number of millisonds - * that got elapsed before this TCOUNT - * cycle + * Find the number of millisonds that + * got elapsed before this TCOUNT cycle */ milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); return (milisec - base); } + +void reset_timer(void) +{ + timestamp = 0; +} diff --git a/cpu/blackfin/reset.c b/cpu/blackfin/reset.c new file mode 100644 index 0000000..d1e34b3 --- /dev/null +++ b/cpu/blackfin/reset.c @@ -0,0 +1,96 @@ +/* + * reset.c - logic for resetting the cpu + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include "cpu.h" + +/* A system soft reset makes external memory unusable so force + * this function into L1. We use the compiler ssync here rather + * than SSYNC() because it's safe (no interrupts and such) and + * we save some L1. We do not need to force sanity in the SYSCR + * register as the BMODE selection bit is cleared by the soft + * reset while the Core B bit (on dual core parts) is cleared by + * the core reset. + */ +__attribute__ ((__l1_text__, __noreturn__)) +void bfin_reset(void) +{ + /* Wait for completion of "system" events such as cache line + * line fills so that we avoid infinite stalls later on as + * much as possible. This code is in L1, so it won't trigger + * any such event after this point in time. + */ + __builtin_bfin_ssync(); + + while (1) { + /* Initiate System software reset. */ + bfin_write_SWRST(0x7); + + /* Due to the way reset is handled in the hardware, we need + * to delay for 7 SCLKS. The only reliable way to do this is + * to calculate the CCLK/SCLK ratio and multiply 7. For now, + * we'll assume worse case which is a 1:15 ratio. + */ + asm( + "LSETUP (1f, 1f) LC0 = %0\n" + "1: nop;" + : + : "a" (15 * 7) + : "LC0", "LB0", "LT0" + ); + + /* Clear System software reset */ + bfin_write_SWRST(0); + + /* Wait for the SWRST write to complete. Cannot rely on SSYNC + * though as the System state is all reset now. + */ + asm( + "LSETUP (1f, 1f) LC1 = %0\n" + "1: nop;" + : + : "a" (15 * 1) + : "LC1", "LB1", "LT1" + ); + + /* Issue core reset */ + asm("raise 1"); + } +} + +/* We need to trampoline ourselves up into L1 since our linker + * does not have relaxtion support and will only generate a + * PC relative call with a 25 bit immediate. This is not enough + * to get us from the top of SDRAM into L1. + */ +__attribute__ ((__noreturn__)) +static inline void bfin_reset_trampoline(void) +{ + if (board_reset) + board_reset(); + while (1) + asm("jump (%0);" : : "a" (bfin_reset)); +} + +__attribute__ ((__noreturn__)) +void bfin_reset_or_hang(void) +{ +#ifdef CONFIG_PANIC_HANG + hang(); +#else + bfin_reset_trampoline(); +#endif +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + bfin_reset_trampoline(); + return 0; +} diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c new file mode 100644 index 0000000..0dfee51 --- /dev/null +++ b/cpu/blackfin/serial.c @@ -0,0 +1,124 @@ +/* + * U-boot - serial.c Blackfin Serial Driver + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/uart.h> + +#if defined(UART_LSR) && (CONFIG_UART_CONSOLE != 0) +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +#endif + +#include "serial.h" + +/* Symbol for our assembly to call. */ +void serial_set_baud(uint32_t baud) +{ + serial_early_set_baud(baud); +} + +/* Symbol for common u-boot code to call. + * Setup the baudrate (brg: baudrate generator). + */ +void serial_setbrg(void) +{ + DECLARE_GLOBAL_DATA_PTR; + serial_set_baud(gd->baudrate); +} + +/* Symbol for our assembly to call. */ +void serial_initialize(void) +{ + serial_early_init(); +} + +/* Symbol for common u-boot code to call. */ +int serial_init(void) +{ + serial_initialize(); + serial_setbrg(); + return 0; +} + +void serial_putc(const char c) +{ + /* send a \r for compatibility */ + if (c == '\n') + serial_putc('\r'); + + WATCHDOG_RESET(); + + /* wait for the hardware fifo to clear up */ + while (!(*pUART_LSR & THRE)) + continue; + + /* queue the character for transmission */ + *pUART_THR = c; + SSYNC(); + + WATCHDOG_RESET(); + + /* wait for the byte to be shifted over the line */ + while (!(*pUART_LSR & TEMT)) + continue; +} + +int serial_tstc(void) +{ + WATCHDOG_RESET(); + return (*pUART_LSR & DR) ? 1 : 0; +} + +int serial_getc(void) +{ + uint16_t uart_lsr_val, uart_rbr_val; + + /* wait for data ! */ + while (!serial_tstc()) + continue; + + /* clear the status and grab the new byte */ + uart_lsr_val = *pUART_LSR; + uart_rbr_val = *pUART_RBR; + + if (uart_lsr_val & (OE|PE|FE|BI)) { + /* Some parts are read-to-clear while others are + * write-to-clear. Just do the write for everyone + * since it cant hurt (other than code size). + */ + *pUART_LSR = (OE|PE|FE|BI); + return -1; + } + + return uart_rbr_val & 0xFF; +} + +void serial_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h new file mode 100644 index 0000000..1f0f4b4 --- /dev/null +++ b/cpu/blackfin/serial.h @@ -0,0 +1,275 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL_H__ +#define __BFIN_CPU_SERIAL_H__ + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/uart.h> + +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define BFIN_DEBUG_EARLY_SERIAL 1 +#else +# define BFIN_DEBUG_EARLY_SERIAL 0 +#endif + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +#ifndef UART_LSR +# if (CONFIG_UART_CONSOLE == 3) +# define pUART_DLH pUART3_DLH +# define pUART_DLL pUART3_DLL +# define pUART_GCTL pUART3_GCTL +# define pUART_IER pUART3_IER +# define pUART_IERC pUART3_IER_CLEAR +# define pUART_LCR pUART3_LCR +# define pUART_LSR pUART3_LSR +# define pUART_RBR pUART3_RBR +# define pUART_THR pUART3_THR +# define UART_THR UART3_THR +# define UART_LSR UART3_LSR +# elif (CONFIG_UART_CONSOLE == 2) +# define pUART_DLH pUART2_DLH +# define pUART_DLL pUART2_DLL +# define pUART_GCTL pUART2_GCTL +# define pUART_IER pUART2_IER +# define pUART_IERC pUART2_IER_CLEAR +# define pUART_LCR pUART2_LCR +# define pUART_LSR pUART2_LSR +# define pUART_RBR pUART2_RBR +# define pUART_THR pUART2_THR +# define UART_THR UART2_THR +# define UART_LSR UART2_LSR +# elif (CONFIG_UART_CONSOLE == 1) +# define pUART_DLH pUART1_DLH +# define pUART_DLL pUART1_DLL +# define pUART_GCTL pUART1_GCTL +# define pUART_IER pUART1_IER +# define pUART_IERC pUART1_IER_CLEAR +# define pUART_LCR pUART1_LCR +# define pUART_LSR pUART1_LSR +# define pUART_RBR pUART1_RBR +# define pUART_THR pUART1_THR +# define UART_THR UART1_THR +# define UART_LSR UART1_LSR +# elif (CONFIG_UART_CONSOLE == 0) +# define pUART_DLH pUART0_DLH +# define pUART_DLL pUART0_DLL +# define pUART_GCTL pUART0_GCTL +# define pUART_IER pUART0_IER +# define pUART_IERC pUART0_IER_CLEAR +# define pUART_LCR pUART0_LCR +# define pUART_LSR pUART0_LSR +# define pUART_RBR pUART0_RBR +# define pUART_THR pUART0_THR +# define UART_THR UART0_THR +# define UART_LSR UART0_LSR +# endif +#endif + +#ifndef __ASSEMBLY__ + +/* We cannot use get_sclk() in initcode as it is defined elsewhere. */ +#ifdef BFIN_IN_INITCODE +# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) +#endif + +#ifdef __ADSPBF54x__ +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +# define CLEAR_IER() (*pUART_IERC = 0) +#else +# define ACCESS_LATCH() (*pUART_LCR |= DLAB) +# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB) +# define CLEAR_IER() (*pUART_IER = 0) +#endif + +__attribute__((always_inline)) +static inline void serial_do_portmux(void) +{ +#ifdef __ADSPBF52x__ +# define DO_MUX(port, mux, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ + case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ + } + SSYNC(); +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) +# define DO_MUX(func, tx, rx) \ + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(PFDE, 0, 1); break; + case 1: DO_MUX(PFTE, 2, 3); break; + } + SSYNC(); +#elif defined(__ADSPBF54x__) +# define DO_MUX(port, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ + case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ + case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ + case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ + } + SSYNC(); +#endif +} + +__attribute__((always_inline)) +static inline void serial_early_init(void) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + /* Enable UART */ + *pUART_GCTL = UCEN; + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = WLS_8; + + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint32_t serial_early_get_baud(void) +{ + /* If the UART isnt enabled, then we are booting an LDR + * from a non-UART source (so like flash) which means + * the baud rate here is meaningless. + */ + if ((*pUART_GCTL & UCEN) != UCEN) + return 0; + +#if (0) /* See comment for serial_reset_baud() in initcode.c */ + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = *pUART_DLL; + uint8_t dlh = *pUART_DLH; + uint16_t divisor = (dlh << 8) | dll; + uint32_t baud = get_sclk() / (divisor * 16); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return baud; +#else + return CONFIG_BAUDRATE; +#endif +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. + * The +1 is to make sure we over sample just a little + * rather than under sample the incoming signals. + */ + uint16_t divisor = (get_sclk() / (baud * 16)) + 1; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + *pUART_DLL = LOB(divisor); + *pUART_DLH = HIB(divisor); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +#ifndef BFIN_IN_INITCODE +__attribute__((always_inline)) +static inline void serial_early_puts(const char *s) +{ + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_puts("Early: "); + serial_puts(s); + } +} +#endif + +#else + +.macro serial_early_init +#ifdef CONFIG_DEBUG_EARLY_SERIAL + call _serial_initialize; +#endif +.endm + +.macro serial_early_set_baud +#ifdef CONFIG_DEBUG_EARLY_SERIAL + R0.L = LO(CONFIG_BAUDRATE); + R0.H = HI(CONFIG_BAUDRATE); + call _serial_set_baud; +#endif +.endm + +/* Recursively expand calls to _serial_putc for every byte + * passed to us. Append a newline when we're all done. + */ +.macro _serial_early_putc byte:req morebytes:vararg +#ifdef CONFIG_DEBUG_EARLY_SERIAL + R0 = \byte; + call _serial_putc; +.ifnb \morebytes + _serial_early_putc \morebytes +.else +.if (\byte != '\n') + _serial_early_putc '\n' +.endif +.endif +#endif +.endm + +/* Wrapper around recurisve _serial_early_putc macro which + * simply prepends the string "Early: " + */ +.macro serial_early_putc byte:req morebytes:vararg +#ifdef CONFIG_DEBUG_EARLY_SERIAL + _serial_early_putc 'E', 'a', 'r', 'l', 'y', ':', ' ', \byte, \morebytes +#endif +.endm + +/* Since we embed the string right into our .text section, we need + * to find its address. We do this by getting our PC and adding 2 + * bytes (which is the length of the jump instruction). Then we + * pass this address to serial_puts(). + */ +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define serial_early_puts(str) \ + call _get_pc; \ + jump 1f; \ + .ascii "Early:"; \ + .ascii __FILE__; \ + .ascii ": "; \ + .ascii str; \ + .asciz "\n"; \ + .align 4; \ +1: \ + R0 += 2; \ + call _serial_puts; +#else +# define serial_early_puts(str) +#endif + +#endif + +#endif diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S new file mode 100644 index 0000000..30212e9 --- /dev/null +++ b/cpu/blackfin/start.S @@ -0,0 +1,219 @@ +/* + * U-boot - start.S Startup file for Blackfin u-boot + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/dma.h> +#include <asm/mach-common/bits/pll.h> + +#include "serial.h" + +/* It may seem odd that we make calls to functions even though we haven't + * relocated ourselves yet out of {flash,ram,wherever}. This is OK because + * the "call" instruction in the Blackfin architecture is actually PC + * relative. So we can call functions all we want and not worry about them + * not being relocated yet. + */ + +.text +ENTRY(_start) + + /* Set our initial stack to L1 scratch space */ + sp.l = LO(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE); + sp.h = HI(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE); + +#ifdef CONFIG_HW_WATCHDOG +# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START +# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 +# endif + /* Program the watchdog with an initial timeout of ~5 seconds. + * That should be long enough to bootstrap ourselves up and + * then the common u-boot code can take over. + */ + P0.L = LO(WDOG_CNT); + P0.H = HI(WDOG_CNT); + R0.L = 0; + R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); + [P0] = R0; + /* fire up the watchdog - R0.L above needs to be 0x0000 */ + W[P0 + (WDOG_CTL - WDOG_CNT)] = R0; +#endif + + /* Turn on the serial for debugging the init process */ + serial_early_init + serial_early_set_baud + + serial_early_puts("Init Registers"); + + /* Disable nested interrupts and enable CYCLES for udelay() */ + R0 = CCEN | 0x30; + SYSCFG = R0; + + /* Zero out registers required by Blackfin ABI. + * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface + */ + r1 = 0 (x); + /* Disable circular buffers */ + l0 = r1; + l1 = r1; + l2 = r1; + l3 = r1; + /* Disable hardware loops in case we were started by 'go' */ + lc0 = r1; + lc1 = r1; + + /* Save RETX so we can pass it while booting Linux */ + r7 = RETX; + +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) + /* In bypass mode, we don't have an LDR with an init block + * so we need to explicitly call it ourselves. This will + * reprogram our clocks and setup our async banks. + */ + /* XXX: we should DMA this into L1, put external memory into + * self refresh, and then jump there ... + */ + call _get_pc; + r3 = 0x0; + r3.h = 0x2000; + cc = r0 < r3 (iu); + if cc jump .Lproc_initialized; + + serial_early_puts("Program Clocks"); + + call _initcode; + + /* Since we reprogrammed SCLK, we need to update the serial divisor */ + serial_early_set_baud + +.Lproc_initialized: +#endif + + /* Inform upper layers if we had to do the relocation ourselves. + * This allows us to detect whether we were loaded by 'go 0x1000' + * or by the bootrom from an LDR. "r6" is "loaded_from_ldr". + */ + r6 = 1 (x); + + /* Relocate from wherever are (FLASH/RAM/etc...) to the + * hardcoded monitor location in the end of RAM. + */ + serial_early_puts("Relocate"); + call _get_pc; +.Loffset: + r2.l = .Loffset; + r2.h = .Loffset; + r3.l = _start; + r3.h = _start; + r1 = r2 - r3; + + r0 = r0 - r1; + + cc = r0 == r3; + if cc jump .Lnorelocate; + + r6 = 0 (x); + p1 = r0; + + p2.l = LO(CFG_MONITOR_BASE); + p2.h = HI(CFG_MONITOR_BASE); + + p3 = 0x04; + p4.l = LO(CFG_MONITOR_BASE + CFG_MONITOR_LEN); + p4.h = HI(CFG_MONITOR_BASE + CFG_MONITOR_LEN); +.Lloop1: + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; + if !cc jump .Lloop1; + + /* Initialize BSS section ... we know that memset() does not + * use the BSS, so it is safe to call here. The bootrom LDR + * takes care of clearing things for us. + */ + serial_early_puts("Zero BSS"); + r0.l = __bss_start; + r0.h = __bss_start; + r1 = 0 (x); + r2.l = __bss_end; + r2.h = __bss_end; + r2 = r2 - r0; + call _memset; + +.Lnorelocate: + + /* Setup the actual stack in external memory */ + r0.h = HI(CONFIG_STACKBASE); + r0.l = LO(CONFIG_STACKBASE); + sp = r0; + fp = sp; + + /* Now lower ourselves from the highest interrupt level to + * the lowest. We do this by masking all interrupts but 15, + * setting the 15 handler to "board_init_f", raising the 15 + * interrupt, and then returning from the highest interrupt + * level to the dummy "jump" until the interrupt controller + * services the pending 15 interrupt. + */ + serial_early_puts("Lower to 15"); + r0 = r7; + r1 = r6; + p0.l = LO(EVT15); + p0.h = HI(EVT15); + p1.l = _cpu_init_f; + p1.h = _cpu_init_f; + [p0] = p1; + p2.l = LO(IMASK); + p2.h = HI(IMASK); + p3.l = LO(EVT_IVG15); + p3.h = HI(EVT_IVG15); + [p2] = p3; + raise 15; + p4.l = .LWAIT_HERE; + p4.h = .LWAIT_HERE; + reti = p4; + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(_start) + +LENTRY(_get_pc) + r0 = rets; +#if ANOMALY_05000371 + NOP; + NOP; + NOP; +#endif + rts; +ENDPROC(_get_pc) diff --git a/cpu/blackfin/system_map.S b/cpu/blackfin/system_map.S new file mode 100644 index 0000000..286d7f3 --- /dev/null +++ b/cpu/blackfin/system_map.S @@ -0,0 +1,18 @@ +/* + * system_map.S - optional symbol lookup for debugging + * + * Copyright (c) 2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <config.h> + +#ifdef CONFIG_DEBUG_DUMP_SYMS +.data +.global _system_map +.type _system_map,@object +_system_map: +#include SYM_FILE +.asciz "" +.size _system_map,.-_system_map +#endif diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c new file mode 100644 index 0000000..4474fe5 --- /dev/null +++ b/cpu/blackfin/traps.c @@ -0,0 +1,353 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> + * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <linux/types.h> +#include <asm/traps.h> +#include <asm/cplb.h> +#include <asm/io.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/mpu.h> +#include <asm/mach-common/bits/trace.h> +#include "cpu.h" + +#define trace_buffer_save(x) \ + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) + +#define trace_buffer_restore(x) \ + bfin_write_TBUFCTL((x)) + +/* The purpose of this map is to provide a mapping of address<->cplb settings + * rather than an exact map of what is actually addressable on the part. This + * map covers all current Blackfin parts. If you try to access an address that + * is in this map but not actually on the part, you won't get an exception and + * reboot, you'll get an external hardware addressing error and reboot. Since + * only the ends matter (you did something wrong and the board reset), the means + * are largely irrelevant. + */ +struct memory_map { + uint32_t start, end; + uint32_t data_flags, inst_flags; +}; +const struct memory_map const bfin_memory_map[] = { + { /* external memory */ + .start = 0x00000000, + .end = 0x20000000, + .data_flags = SDRAM_DGENERIC, + .inst_flags = SDRAM_IGENERIC, + }, + { /* async banks */ + .start = 0x20000000, + .end = 0x30000000, + .data_flags = SDRAM_EBIU, + .inst_flags = SDRAM_INON_CHBL, + }, + { /* everything on chip */ + .start = 0xE0000000, + .end = 0xFFFFFFFF, + .data_flags = L1_DMEMORY, + .inst_flags = L1_IMEMORY, + } +}; + +void trap_c(struct pt_regs *regs) +{ + uint32_t trapnr = (regs->seqstat & EXCAUSE); + bool data = false; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + + if (ANOMALY_05000261) { + static uint32_t last_cplb_fault_retx; + /* + * Work around an anomaly: if we see a new DCPLB fault, + * return without doing anything. Then, + * if we get the same fault again, handle it. + */ + if (last_cplb_fault_retx != regs->retx) { + last_cplb_fault_retx = regs->retx; + return; + } + } + + data = true; + /* fall through */ + + /* 0x27 - Instruction CPLB Miss */ + case VEC_CPLB_I_M: { + volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA; + uint32_t new_cplb_addr = 0, new_cplb_data = 0; + static size_t last_evicted; + size_t i; + + new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1); + + for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) { + /* if the exception is inside this range, lets use it */ + if (new_cplb_addr >= bfin_memory_map[i].start && + new_cplb_addr < bfin_memory_map[i].end) + break; + } + if (i == ARRAY_SIZE(bfin_memory_map)) { + printf("%cCPLB exception outside of memory map at 0x%p\n", + (data ? 'D' : 'I'), new_cplb_addr); + bfin_panic(regs); + } else + debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end); + new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags); + + /* Turn the cache off */ + SSYNC(); + if (data) { + asm(" .align 8; "); + *pDMEM_CONTROL &= ~ENDCPLB; + } else { + asm(" .align 8; "); + *pIMEM_CONTROL &= ~ENICPLB; + } + SSYNC(); + + if (data) { + CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0; + CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0; + } else { + CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0; + CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0; + } + + /* find the next unlocked entry and evict it */ + i = last_evicted & 0xF; + debug("last evicted = %i\n", i); + CPLB_DATA = CPLB_DATA_BASE + i; + while (*CPLB_DATA & CPLB_LOCK) { + debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA); + i = (i + 1) & 0xF; /* wrap around */ + CPLB_DATA = CPLB_DATA_BASE + i; + } + CPLB_ADDR = CPLB_ADDR_BASE + i; + + debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA); + last_evicted = i + 1; + *CPLB_ADDR = new_cplb_addr; + *CPLB_DATA = new_cplb_data; + + /* dump current table for debugging purposes */ + CPLB_ADDR = CPLB_ADDR_BASE; + CPLB_DATA = CPLB_DATA_BASE; + for (i = 0; i < 16; ++i) + debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++); + + /* Turn the cache back on */ + SSYNC(); + if (data) { + asm(" .align 8; "); + *pDMEM_CONTROL |= ENDCPLB; + } else { + asm(" .align 8; "); + *pIMEM_CONTROL |= ENICPLB; + } + SSYNC(); + + break; + } + + default: + /* All traps come here */ + bfin_panic(regs); + } +} + +#ifdef CONFIG_DEBUG_DUMP +# define ENABLE_DUMP 1 +#else +# define ENABLE_DUMP 0 +#endif + +#ifdef CONFIG_DEBUG_DUMP_SYMS +# define ENABLE_DUMP_SYMS 1 +#else +# define ENABLE_DUMP_SYMS 0 +#endif + +static const char *symbol_lookup(unsigned long addr, unsigned long *caddr) +{ + if (!ENABLE_DUMP_SYMS) + return NULL; + + extern const char system_map[] __attribute__((__weak__)); + const char *sym, *csym; + char *esym; + unsigned long sym_addr; + + sym = system_map; + csym = NULL; + *caddr = 0; + + while (*sym) { + sym_addr = simple_strtoul(sym, &esym, 16); + sym = esym + 1; + if (sym_addr > addr) + break; + *caddr = sym_addr; + csym = sym; + sym += strlen(sym) + 1; + } + + return csym; +} + +static void decode_address(char *buf, unsigned long address) +{ + unsigned long sym_addr; + const char *sym = symbol_lookup(address, &sym_addr); + + if (sym) { + sprintf(buf, "<0x%p> { %s + 0x%x }", address, sym, address - sym_addr); + return; + } + + if (!address) + sprintf(buf, "<0x%p> /* Maybe null pointer? */", address); + else if (address >= CFG_MONITOR_BASE && + address < CFG_MONITOR_BASE + CFG_MONITOR_LEN) + sprintf(buf, "<0x%p> /* somewhere in u-boot */", address); + else + sprintf(buf, "<0x%p> /* unknown address */", address); +} + +void dump(struct pt_regs *fp) +{ + char buf[150]; + size_t i; + + if (!ENABLE_DUMP) + return; + + printf("SEQUENCER STATUS:\n"); + printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", + fp->seqstat, fp->ipend, fp->syscfg); + printf(" HWERRCAUSE: 0x%lx\n", (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P); + printf(" EXCAUSE : 0x%lx\n", (fp->seqstat & EXCAUSE) >> EXCAUSE_P); + for (i = 6; i <= 15; ++i) { + if (fp->ipend & (1 << i)) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + printf(" physical IVG%i asserted : %s\n", i, buf); + } + } + decode_address(buf, fp->rete); + printf(" RETE: %s\n", buf); + decode_address(buf, fp->retn); + printf(" RETN: %s\n", buf); + decode_address(buf, fp->retx); + printf(" RETX: %s\n", buf); + decode_address(buf, fp->rets); + printf(" RETS: %s\n", buf); + decode_address(buf, fp->pc); + printf(" PC : %s\n", buf); + + if (fp->seqstat & EXCAUSE) { + decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); + printf("DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); + printf("ICPLB_FAULT_ADDR: %s\n", buf); + } + + printf("\nPROCESSOR STATE:\n"); + printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", + fp->p4, fp->p5, fp->fp, fp); + printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + printf("USP : %08lx ASTAT: %08lx\n", + fp->usp, fp->astat); + + printf("\n"); +} + +void dump_bfin_trace_buffer(void) +{ + char buf[150]; + unsigned long tflags; + size_t i = 0; + + if (!ENABLE_DUMP) + return; + + trace_buffer_save(tflags); + + printf("Hardware Trace:\n"); + + if (bfin_read_TBUFSTAT() & TBUFCNT) { + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + decode_address(buf, bfin_read_TBUF()); + printf("%4i Target : %s\n", i, buf); + decode_address(buf, bfin_read_TBUF()); + printf(" Source : %s\n", buf); + } + } + + trace_buffer_restore(tflags); +} + +void bfin_panic(struct pt_regs *regs) +{ + if (ENABLE_DUMP) { + unsigned long tflags; + trace_buffer_save(tflags); + } + + puts( + "\n" + "\n" + "\n" + "Ack! Something bad happened to the Blackfin!\n" + "\n" + ); + dump(regs); + dump_bfin_trace_buffer(); + printf( + "\n" + "Please reset the board\n" + "\n" + ); + bfin_reset_or_hang(); +} diff --git a/cpu/blackfin/watchdog.c b/cpu/blackfin/watchdog.c new file mode 100644 index 0000000..b47c6b6 --- /dev/null +++ b/cpu/blackfin/watchdog.c @@ -0,0 +1,25 @@ +/* + * watchdog.c - driver for Blackfin on-chip watchdog + * + * Copyright (c) 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/blackfin.h> + +#ifdef CONFIG_HW_WATCHDOG +void hw_watchdog_reset(void) +{ + bfin_write_WDOG_STAT(0); +} + +void hw_watchdog_init(void) +{ + bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */ + hw_watchdog_reset(); + bfin_write_WDOG_CTL(0x0); +} +#endif diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index 0e2db12..1b47c97 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -354,3 +354,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S index 2bd603d..ad04c09 100644 --- a/cpu/mcf523x/start.S +++ b/cpu/mcf523x/start.S @@ -338,3 +338,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf52x2/config.mk b/cpu/mcf52x2/config.mk index c3899c5..650e340 100644 --- a/cpu/mcf52x2/config.mk +++ b/cpu/mcf52x2/config.mk @@ -30,6 +30,7 @@ is5249:=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg)) is5253:=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg)) is5271:=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg)) is5272:=$(shell grep CONFIG_M5272 $(TOPDIR)/include/$(cfg)) +is5275:=$(shell grep CONFIG_M5275 $(TOPDIR)/include/$(cfg)) is5282:=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg)) @@ -47,6 +48,9 @@ endif ifneq (,$(findstring CONFIG_M5272,$(is5272))) PLATFORM_CPPFLAGS += -mcpu=5272 endif +ifneq (,$(findstring CONFIG_M5275,$(is5275))) +PLATFORM_CPPFLAGS += -mcpu=5275 +endif ifneq (,$(findstring CONFIG_M5282,$(is5282))) PLATFORM_CPPFLAGS += -mcpu=5282 endif diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 71ea408..d5d3d33 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -6,6 +6,9 @@ * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> * + * MCF5275 additions + * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -180,6 +183,69 @@ int watchdog_init(void) #endif /* #ifdef CONFIG_M5272 */ +#ifdef CONFIG_M5275 +int do_reset(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM); + + udelay(1000); + + rcm->rcr = RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + char buf[32]; + + printf("CPU: Freescale Coldfire MCF5275 at %s MHz\n", + strmhz(buf, CFG_CLK)); + return 0; +}; + + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + wdt->wsr = 0x5555; + wdt->wsr = 0xAAAA; +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->wsr = 0x5555; /* reset watchdog counter */ + wdt->wsr = 0xAAAA; + wdt->wcr = 0; /* disable watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->wcr = 0; /* disable watchdog */ + + /* set timeout and enable watchdog */ + wdt->wmr = + ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + wdt->wsr = 0x5555; /* reset watchdog counter */ + wdt->wsr = 0xAAAA; + + puts("WATCHDOG:enabled\n"); + return (0); +} +#endif /* #ifdef CONFIG_WATCHDOG */ + +#endif /* #ifdef CONFIG_M5275 */ + #ifdef CONFIG_M5282 int checkcpu(void) { diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 458b85e..207a37e 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -10,6 +10,9 @@ * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * Hayden Fraser (Hayden.Fraser@freescale.com) * + * MCF5275 additions + * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -245,6 +248,114 @@ void uart_port_conf(void) } #endif /* #if defined(CONFIG_M5272) */ +#if defined(CONFIG_M5275) + +/* + * Breathe some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + /* if we come from RAM we assume the CPU is + * already initialized. + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM + volatile wdog_t *wdog_reg = (wdog_t *)(MMAP_WDOG); + volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); + volatile csctrl_t *csctrl_reg = (csctrl_t *)(MMAP_FBCS); + + /* Kill watchdog so we can initialize the PLL */ + wdog_reg->wcr = 0; + + /* Memory Controller: */ + /* Flash */ + csctrl_reg->ar0 = CFG_AR0_PRELIM; + csctrl_reg->cr0 = CFG_CR0_PRELIM; + csctrl_reg->mr0 = CFG_MR0_PRELIM; + +#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM)) + csctrl_reg->ar1 = CFG_AR1_PRELIM; + csctrl_reg->cr1 = CFG_CR1_PRELIM; + csctrl_reg->mr1 = CFG_MR1_PRELIM; +#endif + +#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM)) + csctrl_reg->ar2 = CFG_AR2_PRELIM; + csctrl_reg->cr2 = CFG_CR2_PRELIM; + csctrl_reg->mr2 = CFG_MR2_PRELIM; +#endif + +#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM)) + csctrl_reg->ar3 = CFG_AR3_PRELIM; + csctrl_reg->cr3 = CFG_CR3_PRELIM; + csctrl_reg->mr3 = CFG_MR3_PRELIM; +#endif + +#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM)) + csctrl_reg->ar4 = CFG_AR4_PRELIM; + csctrl_reg->cr4 = CFG_CR4_PRELIM; + csctrl_reg->mr4 = CFG_MR4_PRELIM; +#endif + +#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM)) + csctrl_reg->ar5 = CFG_AR5_PRELIM; + csctrl_reg->cr5 = CFG_CR5_PRELIM; + csctrl_reg->mr5 = CFG_MR5_PRELIM; +#endif + +#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM)) + csctrl_reg->ar6 = CFG_AR6_PRELIM; + csctrl_reg->cr6 = CFG_CR6_PRELIM; + csctrl_reg->mr6 = CFG_MR6_PRELIM; +#endif + +#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM)) + csctrl_reg->ar7 = CFG_AR7_PRELIM; + csctrl_reg->cr7 = CFG_CR7_PRELIM; + csctrl_reg->mr7 = CFG_MR7_PRELIM; +#endif + +#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ + +#ifdef CONFIG_FSL_I2C + gpio_reg->par_feci2c = 0x000F; +#endif + + /* enable instruction cache now */ + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart |= UART0_ENABLE_MASK; + break; + case 1: + gpio->par_uart |= UART1_ENABLE_MASK; + break; + case 2: + gpio->par_uart |= UART2_ENABLE_MASK; + break; + } +} +#endif /* #if defined(CONFIG_M5275) */ + #if defined(CONFIG_M5282) /* * Breath some life into the CPU... diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index 9167cec..b8fb7bb 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -59,7 +59,7 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5272 */ -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275) int interrupt_init(void) { volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); @@ -81,7 +81,7 @@ void dtimer_intr_setup(void) intp->imrl0 &= ~CFG_TMRINTR_MASK; } #endif /* CONFIG_MCFTMR */ -#endif /* CONFIG_M5282 | CONFIG_M5271 */ +#endif /* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */ #if defined(CONFIG_M5249) || defined(CONFIG_M5253) int interrupt_init(void) diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index bc1e200..85a5c4d 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -64,8 +64,18 @@ int get_clocks (void) #endif /* CONFIG_M5249 || CONFIG_M5253 */ +#if defined(CONFIG_M5275) + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + + /* Setup PLL */ + pll->syncr = 0x01080000; + while (!(pll->synsr & FMPLL_SYNSR_LOCK)); + pll->syncr = 0x01000000; + while (!(pll->synsr & FMPLL_SYNSR_LOCK)); +#endif + gd->cpu_clk = CFG_CLK; -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 260a09a..2bc0df3 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -56,9 +56,7 @@ _vectors: .long 0x00000000 /* Flash offset is 0 until we setup CS0 */ -#if defined(CONFIG_R5200) -.long 0x400 -#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) +#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) .long _start - TEXT_BASE #else .long _START @@ -160,7 +158,7 @@ _copy_flash: _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 - movec %d0, %RAMBAR0 + movec %d0, %FLASHBAR jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: nop @@ -168,7 +166,7 @@ _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 - movec %d0, %RAMBAR0 + movec %d0, %RAMBAR1 #endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ #endif @@ -185,16 +183,15 @@ _after_flashbar_copy: movec %d0, %VBR #endif -#ifdef CONFIG_R5200 - move.l #(_flash_setup-CFG_FLASH_BASE), %a0 - move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1 - move.l #(CFG_INIT_RAM_ADDR), %a2 -_copy_flash: - move.l (%a0)+, (%a2)+ - cmp.l %a0, %a1 - bgt.s _copy_flash - jmp CFG_INIT_RAM_ADDR -_after_flash_copy: +#ifdef CONFIG_M5275 + /* Initialize IPSBAR */ + move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ + move.l %d0, 0x40000000 +/* movec %d0, %MBAR */ + + /* Initialize RAMBAR: locate SRAM and validate it */ + move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + movec %d0, %RAMBAR1 #endif #if 0 @@ -219,24 +216,6 @@ _after_flash_copy: /*------------------------------------------------------------------------------*/ -#ifdef CONFIG_R5200 -_flash_setup: - /* CSAR0 */ - move.l #((CFG_FLASH_BASE & 0xffff0000) >> 16), %d0 - move.w %d0, 0x40000080 - - /* CSCR0 */ - move.l #0x2180, %d0 /* 8 wait states, 16bit port, auto ack, */ - move.w %d0, 0x4000008A - - /* CSMR0 */ - move.l #0x001f0001, %d0 /* 2 MB, valid */ - move.l %d0, 0x40000084 - - jmp _after_flash_copy.L -_flash_setup_end: -#endif - /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -394,6 +373,25 @@ icache_enable: rts #endif +#if defined(CONFIG_M5275) +/* + * Instruction cache only + */ + .globl icache_enable +icache_enable: + move.l #0x01400000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0x0000c000, %d0 /* Setup SDRAM caching */ + movec %d0, %ACR0 /* Enable cache */ + move.l #0x00000000, %d0 /* No other caching */ + movec %d0, %ACR1 /* Enable cache */ + move.l #0x80400100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + moveq #1, %d0 + move.l %d0, icache_state + rts +#endif + #ifdef CONFIG_M5282 .globl icache_enable icache_enable: @@ -478,3 +476,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 61be2ea..a524f70 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -333,3 +333,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf5445x/Makefile b/cpu/mcf5445x/Makefile index 26ec298..a549fdd 100644 --- a/cpu/mcf5445x/Makefile +++ b/cpu/mcf5445x/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.o -COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o dspi.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf5445x/dspi.c b/cpu/mcf5445x/dspi.c new file mode 100644 index 0000000..44d8505 --- /dev/null +++ b/cpu/mcf5445x/dspi.c @@ -0,0 +1,73 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> + +#if defined(CONFIG_CF_DSPI) +#include <asm/immap.h> +void dspi_init(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + gpio->par_dspi = GPIO_PAR_DSPI_PCS5_PCS5 | GPIO_PAR_DSPI_PCS2_PCS2 | + GPIO_PAR_DSPI_PCS1_PCS1 | GPIO_PAR_DSPI_PCS0_PCS0 | + GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | + GPIO_PAR_DSPI_SCK_SCK; + + dspi->dmcr = DSPI_DMCR_MSTR | DSPI_DMCR_CSIS7 | DSPI_DMCR_CSIS6 | + DSPI_DMCR_CSIS5 | DSPI_DMCR_CSIS4 | DSPI_DMCR_CSIS3 | + DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 | + DSPI_DMCR_CRXF | DSPI_DMCR_CTXF; + + dspi->dctar0 = DSPI_DCTAR_TRSZ(7) | DSPI_DCTAR_CPOL | DSPI_DCTAR_CPHA | + DSPI_DCTAR_PCSSCK_1CLK | DSPI_DCTAR_PASC(0) | + DSPI_DCTAR_PDT(0) | DSPI_DCTAR_CSSCK(0) | + DSPI_DCTAR_ASC(0) | DSPI_DCTAR_PBR(0) | + DSPI_DCTAR_DT(1) | DSPI_DCTAR_BR(1); +} + +void dspi_tx(int chipsel, u8 attrib, u16 data) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x0000F000) >= 4) ; + + dspi->dtfr = (attrib << 24) | ((1 << chipsel) << 16) | data; +} + +u16 dspi_rx(void) +{ + volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; + + while ((dspi->dsr & 0x000000F0) == 0) ; + + return (dspi->drfr & 0xFFFF); +} + +#endif /* CONFIG_HARD_SPI */ diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index d64c5af..0c5194a 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -379,3 +379,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 442665f..c12d7a0 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -359,3 +359,4 @@ version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" + .align 4 diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index bff3cef..36de78d 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -42,6 +42,30 @@ int checkcpu(void) u32 pvr = get_pvr(); u32 spridr; char buf[32]; + int i; + +#define CPU_TYPE_ENTRY(x) {#x, SPR_##x} + const struct cpu_type { + char name[15]; + u32 partid; + } cpu_type_list [] = { + CPU_TYPE_ENTRY(8311), + CPU_TYPE_ENTRY(8313), + CPU_TYPE_ENTRY(8314), + CPU_TYPE_ENTRY(8315), + CPU_TYPE_ENTRY(8321), + CPU_TYPE_ENTRY(8323), + CPU_TYPE_ENTRY(8343), + CPU_TYPE_ENTRY(8347_TBGA_), + CPU_TYPE_ENTRY(8347_PBGA_), + CPU_TYPE_ENTRY(8349), + CPU_TYPE_ENTRY(8358_TBGA_), + CPU_TYPE_ENTRY(8358_PBGA_), + CPU_TYPE_ENTRY(8360), + CPU_TYPE_ENTRY(8377), + CPU_TYPE_ENTRY(8378), + CPU_TYPE_ENTRY(8379), + }; immr = (immap_t *)CFG_IMMR; @@ -69,130 +93,26 @@ int checkcpu(void) } spridr = immr->sysconf.spridr; - switch(spridr) { - case SPR_8349E_REV10: - case SPR_8349E_REV11: - case SPR_8349E_REV31: - puts("MPC8349E, "); - break; - case SPR_8349_REV10: - case SPR_8349_REV11: - case SPR_8349_REV31: - puts("MPC8349, "); - break; - case SPR_8347E_REV10_TBGA: - case SPR_8347E_REV11_TBGA: - case SPR_8347E_REV31_TBGA: - case SPR_8347E_REV10_PBGA: - case SPR_8347E_REV11_PBGA: - case SPR_8347E_REV31_PBGA: - puts("MPC8347E, "); - break; - case SPR_8347_REV10_TBGA: - case SPR_8347_REV11_TBGA: - case SPR_8347_REV31_TBGA: - case SPR_8347_REV10_PBGA: - case SPR_8347_REV11_PBGA: - case SPR_8347_REV31_PBGA: - puts("MPC8347, "); - break; - case SPR_8343E_REV10: - case SPR_8343E_REV11: - case SPR_8343E_REV31: - puts("MPC8343E, "); - break; - case SPR_8343_REV10: - case SPR_8343_REV11: - case SPR_8343_REV31: - puts("MPC8343, "); - break; - case SPR_8360E_REV10: - case SPR_8360E_REV11: - case SPR_8360E_REV12: - case SPR_8360E_REV20: - case SPR_8360E_REV21: - puts("MPC8360E, "); - break; - case SPR_8360_REV10: - case SPR_8360_REV11: - case SPR_8360_REV12: - case SPR_8360_REV20: - case SPR_8360_REV21: - puts("MPC8360, "); - break; - case SPR_8323E_REV10: - case SPR_8323E_REV11: - puts("MPC8323E, "); - break; - case SPR_8323_REV10: - case SPR_8323_REV11: - puts("MPC8323, "); - break; - case SPR_8321E_REV10: - case SPR_8321E_REV11: - puts("MPC8321E, "); - break; - case SPR_8321_REV10: - case SPR_8321_REV11: - puts("MPC8321, "); - break; - case SPR_8311_REV10: - puts("MPC8311, "); - break; - case SPR_8311E_REV10: - puts("MPC8311E, "); - break; - case SPR_8313_REV10: - puts("MPC8313, "); - break; - case SPR_8313E_REV10: - puts("MPC8313E, "); - break; - case SPR_8315E_REV10: - puts("MPC8315E, "); - break; - case SPR_8315_REV10: - puts("MPC8315, "); - break; - case SPR_8314E_REV10: - puts("MPC8314E, "); - break; - case SPR_8314_REV10: - puts("MPC8314, "); - break; - case SPR_8379E_REV10: - puts("MPC8379E, "); - break; - case SPR_8379_REV10: - puts("MPC8379, "); - break; - case SPR_8378E_REV10: - puts("MPC8378E, "); - break; - case SPR_8378_REV10: - puts("MPC8378, "); - break; - case SPR_8377E_REV10: - puts("MPC8377E, "); - break; - case SPR_8377_REV10: - puts("MPC8377, "); - break; - default: - printf("Rev: Unknown revision number:%08x\n" - "Warning: Unsupported cpu revision!\n",spridr); - return 0; - } -#if defined(CONFIG_MPC834X) - /* Multiple revisons of 834x processors may have the same SPRIDR value. - * So use PVR to identify the revision number. - */ - printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); -#else - printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); -#endif - printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) { + puts("MPC"); + puts(cpu_type_list[i].name); + if (IS_E_PROCESSOR(spridr)) + puts("E"); + if (REVID_MAJOR(spridr) >= 2) + puts("A"); + printf(", Rev: %d.%d", REVID_MAJOR(spridr), + REVID_MINOR(spridr)); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + printf("(SPRIDR %08x unknown), ", spridr); + + printf(" at %s MHz, ", strmhz(buf, clock)); + + printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk)); return 0; } diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0acca47..97ac7bb 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,10 +34,13 @@ #include <asm/mmu.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + void board_add_ram_info(int use_default) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; + char buf[32]; printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); @@ -48,9 +51,11 @@ void board_add_ram_info(int use_default) puts(", 64-bit"); if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - puts(", ECC on)"); + puts(", ECC on"); else - puts(", ECC off)"); + puts(", ECC off"); + + printf(", %s MHz)", strmhz(buf, gd->mem_clk)); #if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) puts("\nSDRAM: "); @@ -60,8 +65,6 @@ void board_add_ram_info(int use_default) #ifdef CONFIG_SPD_EEPROM -DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); @@ -78,12 +81,12 @@ extern int dma_xfer(void *dest, uint count, void *src); int picos_to_clk(int picos) { - unsigned int ddr_bus_clk; + unsigned int mem_bus_clk; int clks; - ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / (1000000000 / (ddr_bus_clk / 1000)); - if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) + mem_bus_clk = gd->mem_clk >> 1; + clks = picos / (1000000000 / (mem_bus_clk / 1000)); + if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0) clks++; return clks; @@ -313,7 +316,7 @@ long int spd_sdram() debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - ddrc_clk = gd->ddr_clk / 1000000; + ddrc_clk = gd->mem_clk / 1000000; effective_data_rate = 0; if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */ diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index f598699..16145dd 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -122,9 +122,9 @@ int get_clocks(void) u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; + u32 mem_clk; #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) u32 qepmf; @@ -400,11 +400,11 @@ int get_clocks(void) return -12; } - ddr_clk = csb_clk * + mem_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; #if defined(CONFIG_MPC8360) - ddr_sec_clk = csb_clk * (1 + + mem_sec_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); #endif @@ -466,9 +466,9 @@ int get_clocks(void) gd->enc_clk = enc_clk; gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; - gd->ddr_clk = ddr_clk; + gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) - gd->ddr_sec_clk = ddr_sec_clk; + gd->mem_sec_clk = mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) gd->qe_clk = qe_clk; @@ -508,9 +508,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); - printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000); #if defined(CONFIG_MPC8360) - printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); + printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000); #endif printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 309eb30..fdf9d35 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -172,8 +172,11 @@ boot_warm: /* time t 5 */ /* there and deflate the flash size back to minimal size */ /*------------------------------------------------------------*/ bl map_flash_by_law1 - lis r4, (CFG_MONITOR_BASE)@h - ori r4, r4, (CFG_MONITOR_BASE)@l + + GET_GOT /* initialize GOT access */ + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET mtlr r5 blr @@ -872,8 +875,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index d990250..007cb4f 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -274,7 +274,7 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; - uint32_t failsafe = 10000; + u32 val = 10000; out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ @@ -290,8 +290,8 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) /* wait for reset */ while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ - failsafe--; - if (failsafe == 0) + val--; + if (val == 0) break; } @@ -308,6 +308,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) hw_p->print_speed = 1; /* print speed message again next time */ #endif +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ + mfsdr(SDR0_ETH_CFG, val); + val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); + mtsdr(SDR0_ETH_CFG, val); +#endif + return; } @@ -494,11 +501,18 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) u32 zmiifer; /* ZMII0_FER reg. */ u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ + int mode; zmiifer = 0; rmiifer = 0; rmiifer1 = 0; +#if defined(CONFIG_460EX) + mode = 9; +#else + mode = 10; +#endif + /* TODO: * NOTE: 460GT has 2 RGMII bridge cores: * emac0 ------ RGMII0_BASE @@ -520,7 +534,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) * Right now only 2*RGMII is supported. Please extend when needed. * sr - 2008-02-19 */ - switch (9) { + switch (mode) { case 1: /* 1 MII - 460EX */ /* GMC0 EMAC4_0, ZMII Bridge */ @@ -703,6 +717,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #ifdef CONFIG_4xx_DCACHE static u32 last_used_ea = 0; #endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + int rgmii_channel; +#endif EMAC_4XX_HW_PST hw_p = dev->priv; @@ -836,10 +855,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = CONFIG_PHY1_ADDR; break; #endif -#if defined (CONFIG_440GX) +#if defined (CONFIG_PHY2_ADDR) case 2: reg = CONFIG_PHY2_ADDR; break; +#endif +#if defined (CONFIG_PHY3_ADDR) case 3: reg = CONFIG_PHY3_ADDR; break; @@ -1006,12 +1027,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) + if (devnum >= 2) + rgmii_channel = devnum - 2; + else + rgmii_channel = devnum; + if (speed == 1000) - reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 100) - reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 10) - reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); else { printf("Error in RGMII Speed\n"); return -1; @@ -1131,7 +1157,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) - mtdcr (malrxctp8r, hw_p->rx); + mtdcr (malrxctp8r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16); #else @@ -1160,6 +1186,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ +#if defined (CONFIG_460GT) + case 2: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp2r, hw_p->tx_phys); + mtdcr (malrxctp16r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16); + break; + case 3: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp3r, hw_p->tx_phys); + mtdcr (malrxctp24r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16); + break; +#endif /* CONFIG_460GT */ case 0: default: /* setup MAL tx & rx channel pointers */ @@ -1866,14 +1912,22 @@ int ppc_4xx_eth_initialize (bd_t * bis) case 2: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet2addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x300; +#else hw_addr[eth_num] = 0x400; +#endif break; #endif #ifdef CONFIG_HAS_ETH3 case 3: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet3addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x400; +#else hw_addr[eth_num] = 0x600; +#endif break; #endif } diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 5d15e2f..42eabfe 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -99,10 +99,107 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif /* CFG_INIT_DCACHE_CS */ +#ifndef CFG_PLL_RECONFIG +#define CFG_PLL_RECONFIG 0 +#endif + +void reconfigure_pll(u32 new_cpu_freq) +{ +#if defined(CONFIG_440EPX) + int reset_needed = 0; + u32 reg, temp; + u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */ + fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */ + fbdv, target_fbdv, lfbdv, target_lfbdv, + perdv0, target_perdv0, /* CLK_PERD */ + spcid0, target_spcid0; /* CLK_SPCID */ + + /* Reconfigure clocks if necessary. + * See PPC440EPx User's Manual, sections 8.2 and 14 */ + if (new_cpu_freq == 667) { + target_prbdv0 = 2; + target_fwdva = 2; + target_fwdvb = 4; + target_fbdv = 20; + target_lfbdv = 1; + target_perdv0 = 4; + target_spcid0 = 4; + + mfcpr(clk_primbd, reg); + temp = (reg & PRBDV_MASK) >> 24; + prbdv0 = temp ? temp : 8; + if (prbdv0 != target_prbdv0) { + reg &= ~PRBDV_MASK; + reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); + mtcpr(clk_primbd, reg); + reset_needed = 1; + } + + mfcpr(clk_plld, reg); + + temp = (reg & PLLD_FWDVA_MASK) >> 16; + fwdva = temp ? temp : 16; + + temp = (reg & PLLD_FWDVB_MASK) >> 8; + fwdvb = temp ? temp : 8; + + temp = (reg & PLLD_FBDV_MASK) >> 24; + fbdv = temp ? temp : 32; + + temp = (reg & PLLD_LFBDV_MASK); + lfbdv = temp ? temp : 64; + + if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) { + reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK | + PLLD_FBDV_MASK | PLLD_LFBDV_MASK); + reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) | + ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) | + ((target_fbdv == 32 ? 0 : target_fbdv) << 24) | + (target_lfbdv == 64 ? 0 : target_lfbdv); + mtcpr(clk_plld, reg); + reset_needed = 1; + } + + mfcpr(clk_perd, reg); + perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24; + if (perdv0 != target_perdv0) { + reg &= ~CPR0_PERD_PERDV0_MASK; + reg |= (target_perdv0 << 24); + mtcpr(clk_perd, reg); + reset_needed = 1; + } + + mfcpr(clk_spcid, reg); + temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24; + spcid0 = temp ? temp : 4; + if (spcid0 != target_spcid0) { + reg &= ~CPR0_SPCID_SPCIDV0_MASK; + reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24); + mtcpr(clk_spcid, reg); + reset_needed = 1; + } + + /* Set reload inhibit so configuration will persist across + * processor resets */ + mfcpr(clk_icfg, reg); + reg &= ~CPR0_ICFG_RLI_MASK; + reg |= 1 << 31; + mtcpr(clk_icfg, reg); + } + + /* Reset processor if configuration changed */ + if (reset_needed) { + __asm__ __volatile__ ("sync; isync"); + mtspr(dbcr0, 0x20000000); + } +#endif +} + /* * Breath some life into the CPU... * - * Set up the memory map, + * Reconfigure PLL if necessary, + * set up the memory map, * initialize a bunch of registers */ void @@ -111,6 +208,7 @@ cpu_init_f (void) #if defined(CONFIG_WATCHDOG) unsigned long val; #endif + reconfigure_pll(CFG_PLL_RECONFIG); #if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE) /* @@ -135,6 +233,7 @@ cpu_init_f (void) #if defined (CFG_GPIO0_TCR) out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ #endif +#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */ #if defined (CONFIG_405EP) /* @@ -147,7 +246,6 @@ cpu_init_f (void) */ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ -#endif /* CONFIG_405EP */ #if defined(CFG_4xx_GPIO_TABLE) gpio_set_chip_configuration(); diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c index 60f89c9..e20c9eb 100644 --- a/cpu/ppc4xx/denali_spd_ddr2.c +++ b/cpu/ppc4xx/denali_spd_ddr2.c @@ -1093,10 +1093,10 @@ long int initdram(int board_type) program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq); - /*------------------------------------------------------------------ + /* * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia - * board SDRAM, but may be overly concervate. - *-----------------------------------------------------------------*/ + * board SDRAM, but may be overly conservative. + */ mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) | DDR0_07_TFAW_ENCODE(13) | DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) | @@ -1181,26 +1181,29 @@ long int initdram(int board_type) denali_wait_for_dlllock(); #if defined(CONFIG_DDR_DATA_EYE) - /* -----------------------------------------------------------+ - * Perform data eye search if requested. - * ----------------------------------------------------------*/ - program_tlb(0, CFG_SDRAM_BASE, dram_size, TLB_WORD2_I_ENABLE); + /* + * Map the first 1 MiB of memory in the TLB, and perform the data eye + * search. + */ + program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE); denali_core_search_data_eye(); denali_sdram_register_dump(); - remove_tlb(CFG_SDRAM_BASE, dram_size); + remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE); #endif #if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) program_tlb(0, CFG_SDRAM_BASE, dram_size, 0); sync(); - eieio(); /* Zero the memory */ debug("Zeroing SDRAM..."); - dcbz_area(CFG_SDRAM_BASE, dram_size); +#if defined(CFG_MEM_TOP_HIDE) + dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE); +#else +#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file +#endif dflush(); debug("Completed\n"); sync(); - eieio(); remove_tlb(CFG_SDRAM_BASE, dram_size); #if defined(CONFIG_DDR_ECC) @@ -1211,7 +1214,6 @@ long int initdram(int board_type) u32 val; sync(); - eieio(); /* Clear error status */ mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); @@ -1229,7 +1231,6 @@ long int initdram(int board_type) print_mcsr(); #endif sync(); - eieio(); } #endif /* defined(CONFIG_DDR_ECC) */ #endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */ diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 698bcb5..8620e2b 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -218,15 +218,16 @@ static void uic_interrupt(u32 uic_base, int vec_base) } else { set_dcr(uic_base + UIC_ER, get_dcr(uic_base + UIC_ER) & - ~(0x80000000 >> vec)); + ~(0x80000000 >> (vec & 0x1f))); printf("Masking bogus interrupt vector %d" " (UIC_BASE=0x%x)\n", vec, uic_base); } /* - * After servicing the interrupt, we have to remove the status indicator. + * After servicing the interrupt, we have to remove the + * status indicator */ - set_dcr(uic_base + UIC_SR, (0x80000000 >> vec)); + set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f))); } /* diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c index 0ebf951..d94e139 100644 --- a/cpu/sh4/cpu.c +++ b/cpu/sh4/cpu.c @@ -24,6 +24,7 @@ #include <common.h> #include <command.h> #include <asm/processor.h> +#include <asm/cache.h> int checkcpu(void) { @@ -51,7 +52,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) void flush_cache (unsigned long addr, unsigned long size) { - + dcache_invalid_range( addr , addr + size ); } void icache_enable (void) |