diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/mpc512x/Makefile | 2 | ||||
| -rw-r--r-- | cpu/mpc512x/fec.c | 794 | ||||
| -rw-r--r-- | cpu/mpc512x/fec.h | 227 | ||||
| -rw-r--r-- | cpu/mpc5xxx/Makefile | 2 | ||||
| -rw-r--r-- | cpu/mpc5xxx/fec.c | 1067 | ||||
| -rw-r--r-- | cpu/mpc5xxx/fec.h | 286 | ||||
| -rw-r--r-- | cpu/mpc5xxx/sdma.h | 93 |
7 files changed, 2 insertions, 2469 deletions
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile index 8ba8ae8..e8f1060 100644 --- a/cpu/mpc512x/Makefile +++ b/cpu/mpc512x/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c deleted file mode 100644 index e9df7de..0000000 --- a/cpu/mpc512x/fec.c +++ /dev/null @@ -1,794 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx FEC driver. - * Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com> - */ - -#include <common.h> -#include <mpc512x.h> -#include <malloc.h> -#include <net.h> -#include <miiphy.h> -#include "fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define DEBUG 0 - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ - defined(CONFIG_MPC512x_FEC) - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len); -#endif - -int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); -int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); -int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); - -static uchar rx_buff[FEC_BUFFER_SIZE]; -static int rx_buff_idx = 0; - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc512x_fec_phydump (char *devname) -{ - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { - /* regs to print: 0...8, 21,27,31 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read (devname, phyAddr, i, &phyStatus); - printf ("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) -{ - int ix; - - /* - * Receive BDs init - */ - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; - fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; - fec->bdBase->rbd[ix].dataLength = 0; - } - - /* - * have the last RBD to close the ring - */ - fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - /* - * Trasmit BDs init - */ - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->bdBase->tbd[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; - - return 0; -} - -/********************************************************************/ -static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; - - /* - * Now, we have an empty RxBD, notify FEC - */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ -} - -/********************************************************************/ -static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) -{ - uint8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init... Begin\n"); -#endif - - /* Set interrupt mask register */ - fec->eth->imask = 0x00000000; - - /* Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; - - /* Set transmit fifo watermark register(X_WMRK), default = 64 */ - fec->eth->x_wmrk = 0x0; - - /* Set Opcode/Pause Duration Register */ - fec->eth->op_pause = 0x00010020; - - /* Frame length=1522; MII mode */ - fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; - - /* Half-duplex, heartbeat disabled */ - fec->eth->x_cntrl = 0x00000000; - - /* Enable MIB counters */ - fec->eth->mib_control = 0x0; - - /* Setup recv fifo start and buff size */ - fec->eth->r_fstart = 0x500; - fec->eth->r_buff_size = FEC_BUFFER_SIZE; - - /* Setup BD base addresses */ - fec->eth->r_des_start = (uint32)fec->bdBase->rbd; - fec->eth->x_des_start = (uint32)fec->bdBase->tbd; - - /* DMA Control */ - fec->eth->dma_control = 0xc0000000; - - /* Enable FEC */ - fec->eth->ecntrl |= 0x00000006; - - /* Initilize addresses and status words of BDs */ - mpc512x_fec_bd_init (fec); - - /* Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; - -#if (DEBUG & 0x1) - printf("mpc512x_fec_init... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - int timeout = 1; - uint16 phyStatus; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Begin\n"); -#endif - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x8000); - udelay (1000); - - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf ("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); - - miiphy_write (dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay (10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay (10000); - if ((timeout--) == 0) { - printf ("failed. Link is down.\n"); - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 50000; - do { - udelay (1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf ("PHY auto neg complete! \n"); -#endif - } - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -static void mpc512x_fec_halt (struct eth_device *dev) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay (10); -#if (DEBUG & 0x3) - printf ("Ethernet task stopped\n"); -#endif -} - -/********************************************************************/ - -static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc512x_fec_tbd_scrub (fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf ("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->bdBase->tbd[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - - /* Activate transmit Buffer Descriptor polling */ - fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ - -#if (DEBUG & 0x8) - printf ( "+" ); -#endif - - fec->cleanTbdNum -= 1; - - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay (10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc512x_fec_recv (struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; - unsigned long ievent; - int frame_length = 0; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc512x_fec_halt (dev); - mpc512x_fec_init (dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc512x_fec_halt (dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc512x_fec_init (dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if (!(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer size - */ - if (pRbd->status & FEC_RBD_LAST) - frame_length = pRbd->dataLength - 4; - else - frame_length = pRbd->dataLength; -#if (DEBUG & 0x20) - { - int i; - printf ("recv data length 0x%08x data hdr: ", - pRbd->dataLength); - for (i = 0; i < 14; i++) - printf ("%x ", *((uint8*)pRbd->dataPointer + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, - frame_length - rx_buff_idx); - rx_buff_idx = frame_length; - - if (pRbd->status & FEC_RBD_LAST) { - NetReceive ((uchar*)rx_buff, frame_length); - rx_buff_idx = 0; - } - } - - /* - * Reset buffer descriptor as empty - */ - mpc512x_fec_rbd_clean (fec, pRbd); - } - - /* Try to fill Buffer Descriptors */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ - return frame_length; -} - -/********************************************************************/ -int mpc512x_fec_initialize (bd_t * bis) -{ - mpc512x_fec_priv *fec; - struct eth_device *dev; - int i; - char *tmp, *end, env_enetaddr[6]; - void * bd; - - fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); - dev = (struct eth_device *) malloc (sizeof(*dev)); - memset (dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *) MPC512X_FEC; - -# ifndef CONFIG_FEC_10MBIT - fec->xcv_type = MII100; -# else - fec->xcv_type = MII10; -# endif - dev->priv = (void *)fec; - dev->iobase = MPC512X_FEC; - dev->init = mpc512x_fec_init; - dev->halt = mpc512x_fec_halt; - dev->send = mpc512x_fec_send; - dev->recv = mpc512x_fec_recv; - - sprintf (dev->name, "FEC ETHERNET"); - eth_register (dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register (dev->name, - fec512x_miiphy_read, fec512x_miiphy_write); -#endif - - /* Clean up space FEC's MIB and FIFO RAM ...*/ - memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); - - /* - * Malloc space for BDs (must be quad word-aligned) - * this pointer is lost, so cannot be freed - */ - bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); - fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); - memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv ("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc512x_fec_set_hwaddr (fec, env_enetaddr); - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - } - - mpc512x_fec_init_phy (dev, bis); - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) -{ - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - *retVal = (uint16) eth->mii_data; - - return 0; -} - -/********************************************************************/ -int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) -{ - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} - -#if (DEBUG & 0x40) -static uint32 local_crc32 (char *string, unsigned int crc_value, int len) -{ - int i; - char c; - unsigned int crc, count; - - /* - * crc32 algorithm - */ - /* - * crc = 0xffffffff; * The initialized value should be 0xffffffff - */ - crc = crc_value; - - for (i = len; --i >= 0;) { - c = *string++; - for (count = 0; count < 8; count++) { - if ((c & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - c >>= 1; - } - } - - /* - * In big endian system, do byte swaping for crc value - */ - /**/ return crc; -} -#endif /* DEBUG */ - -#endif /* CONFIG_MPC512x_FEC */ diff --git a/cpu/mpc512x/fec.h b/cpu/mpc512x/fec.h deleted file mode 100644 index 9c38502..0000000 --- a/cpu/mpc512x/fec.h +++ /dev/null @@ -1,227 +0,0 @@ -/* - * (C) Copyright 2003 - 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx driver's header file. - */ - -#ifndef __MPC512X_FEC_H -#define __MPC512X_FEC_H - -#include <common.h> -#include <mpc512x.h> - -typedef unsigned long uint32; -typedef unsigned short uint16; -typedef unsigned char uint8; - -typedef struct ethernet_register_set { - -/* [10:2]addr = 00 */ - -/* Control and status Registers (offset 000-1FF) */ - - volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ - volatile uint32 ievent; /* MBAR_ETH + 0x004 */ - volatile uint32 imask; /* MBAR_ETH + 0x008 */ - - volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ - volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ - volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ - - volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */ - volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ - - volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */ - volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ - volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ - - volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */ - volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ - - volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */ - volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ - volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ - - volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */ - volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ - - volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */ - volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ - volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ - volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ - - volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */ - volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ - volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ - volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ - volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ - - volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */ - volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ - volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ - volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */ - volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ - volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ - - volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */ - volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */ - volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */ - volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */ - volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */ - volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ - volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */ - -/* MIB COUNTERS (Offset 200-2FF) */ - - volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ - volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ - volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ - volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ - volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ - volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ - volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ - volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ - volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ - volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ - volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ - volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ - volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ - volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ - volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ - volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ - volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ - volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ - volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ - volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ - volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ - volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ - volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ - volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ - volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ - volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ - volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ - volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ - volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ - volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ - - volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */ - volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ - volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ - volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ - volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ - volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ - volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ - volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ - volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ - volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ - - volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ - - volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ - volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ - volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ - volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ - volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ - volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ - volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ - volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ - volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ - volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ - volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ - volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ - volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ - volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ - volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ - - volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */ - - volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */ -} ethernet_regs; - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_RBD; - -typedef struct { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ - -/* Buffer size must be evenly divisible by 16 */ -#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) - -typedef struct { - uint8 frame[FEC_BUFFER_SIZE]; -} mpc512x_frame; - -typedef struct { - FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ - FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ - mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ -} mpc512x_buff_descs; - -typedef struct { - ethernet_regs *eth; - xceiver_type xcv_type; /* transceiver type */ - mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ - uint16 rbdIndex; /* next receive BD to read */ - uint16 tbdIndex; /* next transmit BD to send */ - uint16 usedTbdIndex; /* next transmit BD to clean */ - uint16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc512x_fec_priv; - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC512X_FEC_H */ diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 312b0bf..06fdbcf 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)lib$(CPU).a START = start.o SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o -COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ +COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c deleted file mode 100644 index bf804ee..0000000 --- a/cpu/mpc5xxx/fec.c +++ /dev/null @@ -1,1067 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.c, - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <malloc.h> -#include <net.h> -#include <miiphy.h> -#include "sdma.h" -#include "fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* #define DEBUG 0x28 */ - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ - defined(CONFIG_MPC5xxx_FEC) - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#if (DEBUG & 0x60) -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec); -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec); -#endif /* DEBUG */ - -#if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len); -#endif - -typedef struct { - uint8 data[1500]; /* actual data */ - int length; /* actual length */ - int used; /* buffer in use or not */ - uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ -} NBUF; - -int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); -int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc5xxx_fec_phydump (char *devname) -{ - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { -#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ - /* regs to print: 0...7, 16...19, 21, 23, 24 */ - 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, -#else - /* regs to print: 0...8, 16...20 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -#endif - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read(devname, phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - char *data; - static int once = 0; - - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - if (!once) { - data = (char *)malloc(FEC_MAX_PKT_SIZE); - if (data == NULL) { - printf ("RBD INIT FAILED\n"); - return -1; - } - fec->rbdBase[ix].dataPointer = (uint32)data; - } - fec->rbdBase[ix].status = FEC_RBD_EMPTY; - fec->rbdBase[ix].dataLength = 0; - } - once ++; - - /* - * have the last RBD to close the ring - */ - fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - return 0; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->tbdBase[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Now, we have an empty RxBD, restart the SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac) -{ - uint8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init... Begin\n"); -#endif - - /* - * Initialize RxBD/TxBD rings - */ - mpc5xxx_fec_rbd_init(fec); - mpc5xxx_fec_tbd_init(fec); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Set FEC-Lite receive control register(R_CNTRL): - */ - if (fec->xcv_type == SEVENWIRE) { - /* - * Frame length=1518; 7-wire mode - */ - fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ - } else { - /* - * Frame length=1518; MII mode; - */ - fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ - } - - fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ - } - - /* - * Set Opcode/Pause Duration Register - */ - fec->eth->op_pause = 0x00010020; /*FIXME 0xffff0020; */ - - /* - * Set Rx FIFO alarm and granularity value - */ - fec->eth->rfifo_cntrl = 0x0c000000 - | (fec->eth->rfifo_cntrl & ~0x0f000000); - fec->eth->rfifo_alarm = 0x0000030c; -#if (DEBUG & 0x22) - if (fec->eth->rfifo_status & 0x00700000 ) { - printf("mpc5xxx_fec_init() RFIFO error\n"); - } -#endif - - /* - * Set Tx FIFO granularity value - */ - fec->eth->tfifo_cntrl = 0x0c000000 - | (fec->eth->tfifo_cntrl & ~0x0f000000); -#if (DEBUG & 0x2) - printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); - printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); -#endif - - /* - * Set transmit fifo watermark register(X_WMRK), default = 64 - */ - fec->eth->tfifo_alarm = 0x00000080; - fec->eth->x_wmrk = 0x2; - - /* - * Set individual address filter for unicast address - * and set physical address registers. - */ - mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr); - - /* - * Set multicast address filter - */ - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - - /* - * Turn ON cheater FSM: ???? - */ - fec->eth->xmit_fsm = 0x03000000; - -#if defined(CONFIG_MPC5200) - /* - * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't - * work w/ the current receive task. - */ - sdma->PtdCntrl |= 0x00000001; -#endif - - /* - * Set priority of different initiators - */ - sdma->IPR0 = 7; /* always */ - sdma->IPR3 = 6; /* Eth RX */ - sdma->IPR4 = 5; /* Eth Tx */ - - /* - * Clear SmartDMA task interrupt pending bits - */ - SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO); - - /* - * Initialize SmartDMA parameters stored in SRAM - */ - *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase; - *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase; - - /* - * Enable FEC-Lite controller - */ - fec->eth->ecntrl |= 0x00000006; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * Enable SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init_phy... Begin\n"); -#endif - - /* - * Initialize GPIO pins - */ - if (fec->xcv_type == SEVENWIRE) { - /* 10MBit with 7-wire operation */ -#if defined(CONFIG_TOTAL5200) - /* 7-wire and USB2 on Ethernet */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000; -#else /* !CONFIG_TOTAL5200 */ - /* 7-wire only */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; -#endif /* CONFIG_TOTAL5200 */ - } else { - /* 100MBit with MD operation */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; - } - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - -/* - * In original Promess-provided code PHY initialization is disabled with the - * following comment: "Phy initialization is DISABLED for now. There was a - * problem with running 100 Mbps on PRO board". Thus we temporarily disable - * PHY initialization for the Motion-PRO board, until a proper fix is found. - */ - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ - } - - if (fec->xcv_type != SEVENWIRE) { - /* - * Initialize PHY(LXT971A): - * - * Generally, on power up, the LXT971A reads its configuration - * pins to check for forced operation, If not cofigured for - * forced operation, it uses auto-negotiation/parallel detection - * to automatically determine line operating conditions. - * If the PHY device on the other side of the link supports - * auto-negotiation, the LXT971A auto-negotiates with it - * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not - * support auto-negotiation, the LXT971A automatically detects - * the presence of either link pulses(10Mbps PHY) or Idle - * symbols(100Mbps) and sets its operating conditions accordingly. - * - * When auto-negotiation is controlled by software, the following - * steps are recommended. - * - * Note: - * The physical address is dependent on hardware configuration. - * - */ - int timeout = 1; - uint16 phyStatus; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x8000); - udelay(1000); - -#if defined(CONFIG_UC101) || defined(CONFIG_MUCMC52) - /* Set the LED configuration Register for the UC101 - and MUCMC52 Board */ - miiphy_write(dev->name, phyAddr, 0x14, 0x4122); -#endif - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); - /* - miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100); - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay(10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay(10000); - if ((timeout--) == 0) { - printf("failed. Link is down.\n"); - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write(dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 5000; - do { - udelay(1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf("PHY auto neg complete! \n"); -#endif - } - - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init_phy... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static void mpc5xxx_fec_halt(struct eth_device *dev) -{ -#if defined(CONFIG_MPC5200) - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; -#endif - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; - - /* - * Disable SmartDMA tasks - */ - SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); - SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); - -#if defined(CONFIG_MPC5200) - /* - * Turn on COMM bus prefetch in the MGT5200 BestComm after we're - * done. It doesn't work w/ the current receive task. - */ - sdma->PtdCntrl &= ~0x00000001; -#endif - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Clear FIFO status registers - */ - fec->eth->rfifo_status &= 0x00700000; - fec->eth->tfifo_status &= 0x00700000; - - fec->eth->reset_cntrl = 0x01000000; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay(10); - -#if (DEBUG & 0x3) - printf("Ethernet task stopped\n"); -#endif -} - -#if (DEBUG & 0x60) -/********************************************************************/ - -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) - || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status); - - printf(" control 0x%08x\n", fec->eth->tfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr); - } -} - -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) - || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status); - - printf(" control 0x%08x\n", fec->eth->rfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr); - } -} -#endif /* DEBUG */ - -/********************************************************************/ - -static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[0].status); - tfifo_print(dev->name, fec); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc5xxx_fec_tbd_scrub(fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->tbdBase[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - -#if (DEBUG & 0x100) - printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); -#endif - - /* - * Kick the MII i/f - */ - if (fec->xcv_type != SEVENWIRE) { - uint16 phyStatus; - miiphy_read(dev->name, 0, 0x1, &phyStatus); - } - - /* - * Enable SmartDMA transmit task - */ - -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif - SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO); -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif -#if (DEBUG & 0x8) - printf( "+" ); -#endif - - fec->cleanTbdNum -= 1; - -#if (DEBUG & 0x129) && (DEBUG & 0x80000000) - printf ("smartDMA ethernet Tx task enabled\n"); -#endif - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay(10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc5xxx_fec_recv(struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; - unsigned long ievent; - int frame_length, len = 0; - NBUF *frame; - uchar buff[FEC_MAX_PKT_SIZE]; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc5xxx_fec_halt(dev); - mpc5xxx_fec_init(dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc5xxx_fec_halt(dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc5xxx_fec_init(dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer address and size - */ - frame = (NBUF *)pRbd->dataPointer; - frame_length = pRbd->dataLength - 4; - -#if (DEBUG & 0x20) - { - int i; - printf("recv data hdr:"); - for (i = 0; i < 14; i++) - printf("%x ", *(frame->head + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy(buff, frame->head, 14); - memcpy(buff + 14, frame->data, frame_length); - NetReceive(buff, frame_length); - len = frame_length; - } - /* - * Reset buffer descriptor as empty - */ - mpc5xxx_fec_rbd_clean(fec, pRbd); - } - SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); - return len; -} - - -/********************************************************************/ -int mpc5xxx_fec_initialize(bd_t * bis) -{ - mpc5xxx_fec_priv *fec; - struct eth_device *dev; - char *tmp, *end; - char env_enetaddr[6]; - int i; - - fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec)); - dev = (struct eth_device *)malloc(sizeof(*dev)); - memset(dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *)MPC5XXX_FEC; - fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; - fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_CANMB) || \ - defined(CONFIG_CM5200) || \ - defined(CONFIG_HMI1001) || \ - defined(CONFIG_ICECUBE) || \ - defined(CONFIG_INKA4X0) || \ - defined(CONFIG_JUPITER) || \ - defined(CONFIG_MCC200) || \ - defined(CONFIG_MOTIONPRO) || \ - defined(CONFIG_MUCMC52) || \ - defined(CONFIG_O2DNT) || \ - defined(CONFIG_PM520) || \ - defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || \ - defined(CONFIG_UC101) || \ - defined(CONFIG_V38B) || \ - defined(CONFIG_MUNICES) -# ifndef CONFIG_FEC_10MBIT - fec->xcv_type = MII100; -# else - fec->xcv_type = MII10; -# endif -#elif defined(CONFIG_TOTAL5200) - fec->xcv_type = SEVENWIRE; -#else -#error fec->xcv_type not initialized. -#endif - - dev->priv = (void *)fec; - dev->iobase = MPC5XXX_FEC; - dev->init = mpc5xxx_fec_init; - dev->halt = mpc5xxx_fec_halt; - dev->send = mpc5xxx_fec_send; - dev->recv = mpc5xxx_fec_recv; - - sprintf(dev->name, "FEC ETHERNET"); - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register (dev->name, - fec5xxx_miiphy_read, fec5xxx_miiphy_write); -#endif - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc5xxx_fec_set_hwaddr(fec, env_enetaddr); - } - - mpc5xxx_fec_init_phy(dev, bis); - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) -{ - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - *retVal = (uint16) eth->mii_data; - - return 0; -} - -/********************************************************************/ -int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) -{ - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} - -#if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len) -{ - int i; - char c; - unsigned int crc, count; - - /* - * crc32 algorithm - */ - /* - * crc = 0xffffffff; * The initialized value should be 0xffffffff - */ - crc = crc_value; - - for (i = len; --i >= 0;) { - c = *string++; - for (count = 0; count < 8; count++) { - if ((c & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - c >>= 1; - } - } - - /* - * In big endian system, do byte swaping for crc value - */ - /**/ return crc; -} -#endif /* DEBUG */ - -#endif /* CONFIG_MPC5xxx_FEC */ diff --git a/cpu/mpc5xxx/fec.h b/cpu/mpc5xxx/fec.h deleted file mode 100644 index 81756a5..0000000 --- a/cpu/mpc5xxx/fec.h +++ /dev/null @@ -1,286 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.h - * (C) Copyright Motorola, Inc., 2000 - * - * odin ethernet header file - */ - -#ifndef __MPC5XXX_FEC_H -#define __MPC5XXX_FEC_H - -#include <common.h> -#include <mpc5xxx.h> -#include "sdma.h" - -typedef unsigned long uint32; -typedef unsigned short uint16; -typedef unsigned char uint8; - -typedef struct ethernet_register_set { - -/* [10:2]addr = 00 */ - -/* Control and status Registers (offset 000-1FF) */ - - volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ - volatile uint32 ievent; /* MBAR_ETH + 0x004 */ - volatile uint32 imask; /* MBAR_ETH + 0x008 */ - - volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ - volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ - volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ - volatile uint32 r_des_active_cl; /* MBAR_ETH + 0x018 */ - volatile uint32 x_des_active_cl; /* MBAR_ETH + 0x01C */ - volatile uint32 ivent_set; /* MBAR_ETH + 0x020 */ - volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ - - volatile uint32 RES1[6]; /* MBAR_ETH + 0x028-03C */ - volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ - volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ - volatile uint32 mii_status; /* MBAR_ETH + 0x048 */ - - volatile uint32 RES2[5]; /* MBAR_ETH + 0x04C-05C */ - volatile uint32 mib_data; /* MBAR_ETH + 0x060 */ - volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ - - volatile uint32 RES3[6]; /* MBAR_ETH + 0x068-7C */ - volatile uint32 r_activate; /* MBAR_ETH + 0x080 */ - volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ - volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ - volatile uint32 r_data; /* MBAR_ETH + 0x08C */ - volatile uint32 ar_done; /* MBAR_ETH + 0x090 */ - volatile uint32 r_test; /* MBAR_ETH + 0x094 */ - volatile uint32 r_mib; /* MBAR_ETH + 0x098 */ - volatile uint32 r_da_low; /* MBAR_ETH + 0x09C */ - volatile uint32 r_da_high; /* MBAR_ETH + 0x0A0 */ - - volatile uint32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */ - volatile uint32 x_activate; /* MBAR_ETH + 0x0C0 */ - volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ - volatile uint32 backoff; /* MBAR_ETH + 0x0C8 */ - volatile uint32 x_data; /* MBAR_ETH + 0x0CC */ - volatile uint32 x_status; /* MBAR_ETH + 0x0D0 */ - volatile uint32 x_mib; /* MBAR_ETH + 0x0D4 */ - volatile uint32 x_test; /* MBAR_ETH + 0x0D8 */ - volatile uint32 fdxfc_da1; /* MBAR_ETH + 0x0DC */ - volatile uint32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */ - volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ - volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ - volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ - - volatile uint32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */ - volatile uint32 instr_reg; /* MBAR_ETH + 0x100 */ - volatile uint32 context_reg; /* MBAR_ETH + 0x104 */ - volatile uint32 test_cntrl; /* MBAR_ETH + 0x108 */ - volatile uint32 acc_reg; /* MBAR_ETH + 0x10C */ - volatile uint32 ones; /* MBAR_ETH + 0x110 */ - volatile uint32 zeros; /* MBAR_ETH + 0x114 */ - volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ - volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ - volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ - volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ - volatile uint32 random; /* MBAR_ETH + 0x128 */ - volatile uint32 rand1; /* MBAR_ETH + 0x12C */ - volatile uint32 tmp; /* MBAR_ETH + 0x130 */ - - volatile uint32 RES6[3]; /* MBAR_ETH + 0x134-13C */ - volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ - volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ - volatile uint32 fcntrl; /* MBAR_ETH + 0x148 */ - volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ - volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ - volatile uint32 r_count; /* MBAR_ETH + 0x154 */ - volatile uint32 r_lag; /* MBAR_ETH + 0x158 */ - volatile uint32 r_read; /* MBAR_ETH + 0x15C */ - volatile uint32 r_write; /* MBAR_ETH + 0x160 */ - volatile uint32 x_count; /* MBAR_ETH + 0x164 */ - volatile uint32 x_lag; /* MBAR_ETH + 0x168 */ - volatile uint32 x_retry; /* MBAR_ETH + 0x16C */ - volatile uint32 x_write; /* MBAR_ETH + 0x170 */ - volatile uint32 x_read; /* MBAR_ETH + 0x174 */ - - volatile uint32 RES7[2]; /* MBAR_ETH + 0x178-17C */ - volatile uint32 fm_cntrl; /* MBAR_ETH + 0x180 */ - volatile uint32 rfifo_data; /* MBAR_ETH + 0x184 */ - volatile uint32 rfifo_status; /* MBAR_ETH + 0x188 */ - volatile uint32 rfifo_cntrl; /* MBAR_ETH + 0x18C */ - volatile uint32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */ - volatile uint32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */ - volatile uint32 rfifo_alarm; /* MBAR_ETH + 0x198 */ - volatile uint32 rfifo_rdptr; /* MBAR_ETH + 0x19C */ - volatile uint32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */ - volatile uint32 tfifo_data; /* MBAR_ETH + 0x1A4 */ - volatile uint32 tfifo_status; /* MBAR_ETH + 0x1A8 */ - volatile uint32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */ - volatile uint32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */ - volatile uint32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */ - volatile uint32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */ - volatile uint32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */ - volatile uint32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */ - - volatile uint32 reset_cntrl; /* MBAR_ETH + 0x1C4 */ - volatile uint32 xmit_fsm; /* MBAR_ETH + 0x1C8 */ - - volatile uint32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */ - volatile uint32 rdes_data0; /* MBAR_ETH + 0x1D8 */ - volatile uint32 rdes_data1; /* MBAR_ETH + 0x1DC */ - volatile uint32 r_length; /* MBAR_ETH + 0x1E0 */ - volatile uint32 x_length; /* MBAR_ETH + 0x1E4 */ - volatile uint32 x_addr; /* MBAR_ETH + 0x1E8 */ - volatile uint32 cdes_data; /* MBAR_ETH + 0x1EC */ - volatile uint32 status; /* MBAR_ETH + 0x1F0 */ - volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ - volatile uint32 des_cmnd; /* MBAR_ETH + 0x1F8 */ - volatile uint32 data; /* MBAR_ETH + 0x1FC */ - -/* MIB COUNTERS (Offset 200-2FF) */ - - volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ - volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ - volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ - volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ - volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ - volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ - volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ - volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ - volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ - volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ - volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ - volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ - volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ - volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ - volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ - volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ - volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ - volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ - volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ - volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ - volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ - volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ - volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ - volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ - volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ - volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ - volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ - volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ - volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ - volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ - - volatile uint32 RES9[2]; /* MBAR_ETH + 0x278-27C */ - volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ - volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ - volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ - volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ - volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ - volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ - volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ - volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ - volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ - - volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ - - volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ - volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ - volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ - volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ - volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ - volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ - volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ - volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ - volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ - volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ - volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ - volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ - volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ - volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ - volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ - - volatile uint32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */ - - volatile uint32 RES11[64]; /* MBAR_ETH + 0x300-3FF */ -} ethernet_regs; - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_RBD; -typedef struct { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -typedef struct { - ethernet_regs *eth; - xceiver_type xcv_type; /* transceiver type */ - FEC_RBD *rbdBase; /* RBD ring */ - FEC_TBD *tbdBase; /* TBD ring */ - uint16 rbdIndex; /* next receive BD to read */ - uint16 tbdIndex; /* next transmit BD to send */ - uint16 usedTbdIndex; /* next transmit BD to clean */ - uint16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc5xxx_fec_priv; - -/* Ethernet parameter area */ -#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00) -#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04) -#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08) -#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c) - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_PKT_SIZE 1536 - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_INT 0x1000 /* Interrupt */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_INT 0x1000 /* Interrupt */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC5XXX_FEC_H */ diff --git a/cpu/mpc5xxx/sdma.h b/cpu/mpc5xxx/sdma.h deleted file mode 100644 index 8b740e4..0000000 --- a/cpu/mpc5xxx/sdma.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on code - * (C) Copyright Motorola, Inc., 2000 - * - * odin smartdma header file - */ - -#ifndef __MPC5XXX_SDMA_H -#define __MPC5XXX_SDMA_H - -#include <common.h> -#include <mpc5xxx.h> - -/* Task number assignment */ -#define FEC_RECV_TASK_NO 0 -#define FEC_XMIT_TASK_NO 1 - -/*---------------------------------------------------------------------*/ - -/* Stuff for Ethernet Tx/Rx tasks */ - -/*---------------------------------------------------------------------*/ - -/* Layout of Ethernet controller Parameter SRAM area: ----------------------------------------------------------------- -0x00: TBD_BASE, base address of TX BD ring -0x04: TBD_NEXT, address of next TX BD to be processed -0x08: RBD_BASE, base address of RX BD ring -0x0C: RBD_NEXT, address of next RX BD to be processed ---------------------------------------------------------------- -ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH). -*/ - -/* base address of SRAM area to store parameters used by Ethernet tasks */ -#define FEC_PARAM_BASE (MPC5XXX_SRAM + 0x0800) - -/* base address of SRAM area for buffer descriptors */ -#define FEC_BD_BASE (MPC5XXX_SRAM + 0x0820) - -/*---------------------------------------------------------------------*/ - -/* common shortcuts used by driver C code */ - -/*---------------------------------------------------------------------*/ - -/* Disable SmartDMA task */ -#define SDMA_TASK_DISABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *)(MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \ - *tcr = (*tcr) & (~0x8000); \ -} - -/* Enable SmartDMA task */ -#define SDMA_TASK_ENABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *) (MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \ - *tcr = (*tcr) | 0x8000; \ -} - -/* Enable interrupt */ -#define SDMA_INT_ENABLE(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntMask &= ~(1 << tasknum); \ -} - -/* Disable interrupt */ -#define SDMA_INT_DISABLE(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntMask |= (1 << tasknum); \ -} - - -/* Clear interrupt pending bits */ -#define SDMA_CLEAR_IEVENT(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntPend = (1 << tasknum); \ -} - -/* get interupt pending bit of a task */ -#define SDMA_GET_PENDINGBIT(tasknum) \ - ((*(vu_long *)(MPC5XXX_SDMA + 0x14)) & (1<<(tasknum))) - -/* get interupt mask bit of a task */ -#define SDMA_GET_MASKBIT(tasknum) \ - ((*(vu_long *)(MPC5XXX_SDMA + 0x18)) & (1<<(tasknum))) - -#endif /* __MPC5XXX_SDMA_H */ |