diff options
Diffstat (limited to 'cpu')
44 files changed, 1763 insertions, 712 deletions
diff --git a/cpu/arm720t/lpc2292/Makefile b/cpu/arm720t/lpc2292/Makefile new file mode 100644 index 0000000..240f1e3 --- /dev/null +++ b/cpu/arm720t/lpc2292/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = flash.o mmc.o mmc_hw.o spi.o +SOBJS = $(obj)iap_entry.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +# this MUST be compiled as thumb code! +$(SOBJS): + $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c new file mode 100644 index 0000000..e5c8697 --- /dev/null +++ b/cpu/arm720t/lpc2292/flash.c @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * Modified to remove all but the IAP-command related code by + * Gary Jennejohn <garyj@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +/* IAP commands use 32 bytes at the top of CPU internal sram, we + use 512 bytes below that */ +#define COPY_BUFFER_LOCATION 0x40003de0 + +#define IAP_LOCATION 0x7ffffff1 +#define IAP_CMD_PREPARE 50 +#define IAP_CMD_COPY 51 +#define IAP_CMD_ERASE 52 +#define IAP_CMD_CHECK 53 +#define IAP_CMD_ID 54 +#define IAP_CMD_VERSION 55 +#define IAP_CMD_COMPARE 56 + +#define IAP_RET_CMD_SUCCESS 0 + +static unsigned long command[5]; +static unsigned long result[2]; + +extern void iap_entry(unsigned long * command, unsigned long * result); + +/*----------------------------------------------------------------------- + * + */ +static int get_flash_sector(flash_info_t * info, ulong flash_addr) +{ + int i; + + for(i = 1; i < (info->sector_count); i++) { + if (flash_addr < (info->start[i])) + break; + } + + return (i-1); +} + +/*----------------------------------------------------------------------- + * This function assumes that flash_addr is aligned on 512 bytes boundary + * in flash. This function also assumes that prepare have been called + * for the sector in question. + */ +int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) +{ + int first_sector; + int last_sector; + + first_sector = get_flash_sector(info, flash_addr); + last_sector = get_flash_sector(info, flash_addr + 512 - 1); + + /* prepare sectors for write */ + command[0] = IAP_CMD_PREPARE; + command[1] = first_sector; + command[2] = last_sector; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROG_ERROR; + } + + command[0] = IAP_CMD_COPY; + command[1] = flash_addr; + command[2] = COPY_BUFFER_LOCATION; + command[3] = 512; + command[4] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP copy failed\n"); + return 1; + } + + return 0; +} + +/*----------------------------------------------------------------------- + */ + +int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag; + int prot; + int sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + + flag = disable_interrupts(); + + printf ("Erasing %d sectors starting at sector %2d.\n" + "This make take some time ... ", + s_last - s_first + 1, s_first); + + command[0] = IAP_CMD_PREPARE; + command[1] = s_first; + command[2] = s_last; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROTECTED; + } + + command[0] = IAP_CMD_ERASE; + command[1] = s_first; + command[2] = s_last; + command[3] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP erase failed\n"); + return ERR_PROTECTED; + } + + if (flag) + enable_interrupts(); + + return ERR_OK; +} + +int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, + ulong cnt) +{ + int first_copy_size; + int last_copy_size; + int first_block; + int last_block; + int nbr_mid_blocks; + uchar memmap_value; + ulong i; + uchar* src_org; + uchar* dst_org; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + first_block = addr / 512; + last_block = (addr + cnt) / 512; + nbr_mid_blocks = last_block - first_block - 1; + + first_copy_size = 512 - (addr % 512); + last_copy_size = (addr + cnt) % 512; + + debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", + (ulong)(first_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + first_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)(first_block * 512)); + + /* copy first block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(first_block * 512), 512); + memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + src, first_copy_size); + lpc2292_copy_buffer_to_flash(info, first_block * 512); + src += first_copy_size; + addr += first_copy_size; + + /* copy middle blocks */ + for (i = 0; i < nbr_mid_blocks; i++) { + debug("copy middle block: %lX -> %lX 512 bytes, " + "%lX -> %lX 512 bytes\n", + (ulong)src, + (ulong)COPY_BUFFER_LOCATION, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); + + memcpy((void*)COPY_BUFFER_LOCATION, src, 512); + lpc2292_copy_buffer_to_flash(info, addr); + src += 512; + addr += 512; + } + + + if (last_copy_size > 0) { + debug("copy last block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", + (ulong)(last_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION), + last_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); + + /* copy last block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(last_block * 512), 512); + memcpy((void*)COPY_BUFFER_LOCATION, + src, last_copy_size); + lpc2292_copy_buffer_to_flash(info, addr); + } + + /* verify write */ + memmap_value = GET8(MEMMAP); + + disable_interrupts(); + + PUT8(MEMMAP, 01); /* we must make sure that initial 64 + bytes are taken from flash when we + do the compare */ + + for (i = 0; i < cnt; i++) { + if (*dst_org != *src_org){ + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + PUT8(MEMMAP, memmap_value); + enable_interrupts(); + + return ret; +} diff --git a/cpu/arm720t/lpc2292/iap_entry.S b/cpu/arm720t/lpc2292/iap_entry.S new file mode 100644 index 0000000..c31d519 --- /dev/null +++ b/cpu/arm720t/lpc2292/iap_entry.S @@ -0,0 +1,7 @@ +IAP_ADDRESS: .word 0x7FFFFFF1 + +.globl iap_entry +iap_entry: + ldr r2, IAP_ADDRESS + bx r2 + mov pc, lr diff --git a/cpu/arm720t/lpc2292/mmc.c b/cpu/arm720t/lpc2292/mmc.c new file mode 100644 index 0000000..fd7f149 --- /dev/null +++ b/cpu/arm720t/lpc2292/mmc.c @@ -0,0 +1,157 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <mmc.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include <part.h> +#include <fat.h> +#include "mmc_hw.h" +#include <asm/arch/spi.h> + +#ifdef CONFIG_MMC + +#undef MMC_DEBUG + +static block_dev_desc_t mmc_dev; + +/* these are filled out by a call to mmc_hw_get_parameters */ +static int hw_size; /* in kbytes */ +static int hw_nr_sects; +static int hw_sect_size; /* in bytes */ + +block_dev_desc_t * mmc_get_dev(int dev) +{ + return (block_dev_desc_t *)(&mmc_dev); +} + +unsigned long mmc_block_read(int dev, + unsigned long start, + lbaint_t blkcnt, + void *buffer) +{ + unsigned long rc = 0; + unsigned char *p = (unsigned char *)buffer; + unsigned long i; + unsigned long addr = start; + +#ifdef MMC_DEBUG + printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start, + (unsigned long)blkcnt); +#endif + + for(i = 0; i < (unsigned long)blkcnt; i++) { +#ifdef MMC_DEBUG + printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p); +#endif + (void)mmc_read_sector(addr, p); + rc++; + addr++; + p += hw_sect_size; + } + + return rc; +} + +/*----------------------------------------------------------------------------- + * Read hardware paramterers (sector size, size, number of sectors) + */ +static int mmc_hw_get_parameters(void) +{ + unsigned char csddata[16]; + unsigned int sizemult; + unsigned int size; + + mmc_read_csd(csddata); + hw_sect_size = 1<<(csddata[5] & 0x0f); + size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0); + sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1); + hw_nr_sects = (size+1)*(1<<(sizemult+2)); + hw_size = hw_nr_sects*hw_sect_size/1024; + +#ifdef MMC_DEBUG + printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, " + "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size); +#endif + + return 0; +} + +int mmc_init(int verbose) +{ + int ret = -ENODEV; + + if (verbose) + printf("mmc_init\n"); + + spi_init(); + /* this meeds to be done twice */ + mmc_hw_init(); + udelay(1000); + mmc_hw_init(); + + mmc_hw_get_parameters(); + + mmc_dev.if_type = IF_TYPE_MMC; + mmc_dev.part_type = PART_TYPE_DOS; + mmc_dev.dev = 0; + mmc_dev.lun = 0; + mmc_dev.type = 0; + mmc_dev.blksz = hw_sect_size; + mmc_dev.lba = hw_nr_sects; + sprintf((char*)mmc_dev.vendor, "Unknown vendor"); + sprintf((char*)mmc_dev.product, "Unknown product"); + sprintf((char*)mmc_dev.revision, "N/A"); + mmc_dev.removable = 0; /* should be true??? */ + mmc_dev.block_read = mmc_block_read; + + fat_register_device(&mmc_dev, 1); + + ret = 0; + + return ret; +} + +int mmc_write(uchar * src, ulong dst, int size) +{ +#ifdef MMC_DEBUG + printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size); +#endif + /* Since mmc2info always returns 0 this function will never be called */ + return 0; +} + +int mmc_read(ulong src, uchar * dst, int size) +{ +#ifdef MMC_DEBUG + printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size); +#endif + /* Since mmc2info always returns 0 this function will never be called */ + return 0; +} + +int mmc2info(ulong addr) +{ + /* This function is used by cmd_cp to determine if source or destination + address resides on MMC-card or not. We do not support copy to and from + MMC-card so we always return 0. */ + return 0; +} + +#endif /* CONFIG_MMC */ diff --git a/cpu/arm720t/lpc2292/mmc_hw.c b/cpu/arm720t/lpc2292/mmc_hw.c new file mode 100644 index 0000000..b4dc4a6 --- /dev/null +++ b/cpu/arm720t/lpc2292/mmc_hw.c @@ -0,0 +1,233 @@ +/* + This code was original written by Ulrich Radig and modified by + Embedded Artists AB (www.embeddedartists.com). + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <config.h> +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/spi.h> + +#define MMC_Enable() PUT32(IO1CLR, 1l << 22) +#define MMC_Disable() PUT32(IO1SET, 1l << 22) +#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0); + +static unsigned char Write_Command_MMC (unsigned char *CMD); +static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, + unsigned short int Bytes); + +/* initialize the hardware */ +int mmc_hw_init(void) +{ + unsigned long a; + unsigned short int Timeout = 0; + unsigned char b; + unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95}; + + /* set-up GPIO and SPI */ + (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */ + (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */ + + MMC_Disable(); + + spi_lock(); + spi_set_clock(248); + spi_set_cfg(0, 1, 0); + MMC_Enable(); + + /* waste some time */ + for(a=0; a < 20000; a++) + asm("nop"); + + /* Put the MMC/SD-card into SPI-mode */ + for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */ + spi_write(0xff); + + /* Sends command CMD0 to MMC/SD-card */ + while (Write_Command_MMC(CMD) != 1) { + if (Timeout++ > 200) { + MMC_Disable(); + spi_unlock(); + return(1); /* Abort with command 1 (return 1) */ + } + } + /* Sends Command CMD1 an MMC/SD-card */ + Timeout = 0; + CMD[0] = 0x41;/* Command 1 */ + CMD[5] = 0xFF; + + while (Write_Command_MMC(CMD) != 0) { + if (Timeout++ > 200) { + MMC_Disable(); + spi_unlock(); + return (2); /* Abort with command 2 (return 2) */ + } + } + + MMC_Disable(); + spi_unlock(); + + return 0; +} + +/* ############################################################################ + Sends a command to the MMC/SD-card + ######################################################################### */ +static unsigned char Write_Command_MMC (unsigned char *CMD) +{ + unsigned char a, tmp = 0xff; + unsigned short int Timeout = 0; + + MMC_Disable(); + spi_write(0xFF); + MMC_Enable(); + + for (a = 0; a < 0x06; a++) + spi_write(*CMD++); + + while (tmp == 0xff) { + tmp = spi_read(); + if (Timeout++ > 5000) + break; + } + + return (tmp); +} + +/* ############################################################################ + Routine to read the CID register from the MMC/SD-card (16 bytes) + ######################################################################### */ +void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short + int Bytes) +{ + unsigned short int a; + + spi_lock(); + mmc_spi_cfg(); + MMC_Enable(); + + if (Write_Command_MMC(CMD) != 0) { + MMC_Disable(); + spi_unlock(); + return; + } + + while (spi_read() != 0xfe) {}; + for (a = 0; a < Bytes; a++) + *Buffer++ = spi_read(); + + /* Read the CRC-byte */ + spi_read(); /* CRC - byte is discarded */ + spi_read(); /* CRC - byte is discarded */ + /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */ + MMC_Disable(); + spi_unlock(); + + return; +} + +/* ############################################################################ + Routine to read a block (512 bytes) from the MMC/SD-card + ######################################################################### */ +unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer) +{ + /* Command 16 to read aBlocks from the MMC/SD - caed */ + unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; + + /* The addres on the MMC/SD-card is in bytes, + addr is transformed from blocks to bytes and the result is + placed into the command */ + + addr = addr << 9; /* addr = addr * 512 */ + + CMD[1] = ((addr & 0xFF000000) >> 24); + CMD[2] = ((addr & 0x00FF0000) >> 16); + CMD[3] = ((addr & 0x0000FF00) >> 8 ); + + MMC_Read_Block(CMD, Buffer, 512); + + return (0); +} + +/* ############################################################################ + Routine to write a block (512 byte) to the MMC/SD-card + ######################################################################### */ +unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer) +{ + unsigned char tmp, a; + unsigned short int b; + /* Command 24 to write a block to the MMC/SD - card */ + unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF}; + + /* The addres on the MMC/SD-card is in bytes, + addr is transformed from blocks to bytes and the result is + placed into the command */ + + addr = addr << 9; /* addr = addr * 512 */ + + CMD[1] = ((addr & 0xFF000000) >> 24); + CMD[2] = ((addr & 0x00FF0000) >> 16); + CMD[3] = ((addr & 0x0000FF00) >> 8 ); + + spi_lock(); + mmc_spi_cfg(); + MMC_Enable(); + + /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */ + tmp = Write_Command_MMC(CMD); + if (tmp != 0) { + MMC_Disable(); + spi_unlock(); + return(tmp); + } + + /* Do a short delay and send a clock-pulse to the MMC/SD-card */ + for (a = 0; a < 100; a++) + spi_read(); + + /* Send a start byte to the MMC/SD-card */ + spi_write(0xFE); + + /* Write the block (512 bytes) to the MMC/SD-card */ + for (b = 0; b < 512; b++) + spi_write(*Buffer++); + + /* write the CRC-Byte */ + spi_write(0xFF); /* write a dummy CRC */ + spi_write(0xFF); /* CRC code is not used */ + + /* Wait for MMC/SD-card busy */ + while (spi_read() != 0xff) {}; + + /* set MMC_Chip_Select to high (MMC/SD-card inactive) */ + MMC_Disable(); + spi_unlock(); + return (0); +} + +/* ######################################################################### + Routine to read the CSD register from the MMC/SD-card (16 bytes) + ######################################################################### */ +unsigned char mmc_read_csd (unsigned char *Buffer) +{ + /* Command to read the CSD register */ + unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF}; + + MMC_Read_Block(CMD, Buffer, 16); + + return (0); +} diff --git a/cpu/arm720t/lpc2292/mmc_hw.h b/cpu/arm720t/lpc2292/mmc_hw.h new file mode 100644 index 0000000..3687dbf --- /dev/null +++ b/cpu/arm720t/lpc2292/mmc_hw.h @@ -0,0 +1,29 @@ +/* + This module implements a linux character device driver for the 24c256 chip. + Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef _MMC_HW_ +#define _MMC_HW_ + +unsigned char mmc_read_csd(unsigned char *Buffer); +unsigned char mmc_read_sector (unsigned long addr, + unsigned char *Buffer); +unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer); +int mmc_hw_init(void); + +#endif /* _MMC_HW_ */ diff --git a/cpu/arm720t/lpc2292/spi.c b/cpu/arm720t/lpc2292/spi.c new file mode 100644 index 0000000..d296bda --- /dev/null +++ b/cpu/arm720t/lpc2292/spi.c @@ -0,0 +1,40 @@ +/* + This module implements an interface to the SPI on the lpc22xx. + Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <config.h> +#include <common.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include <asm/arch/spi.h> + +unsigned long spi_flags; +unsigned char spi_idle = 0x00; + +int spi_init(void) +{ + unsigned long pinsel0_value; + + /* activate spi pins */ + pinsel0_value = GET32(PINSEL0); + pinsel0_value &= ~(0xFFl << 8); + pinsel0_value |= (0x55l << 8); + PUT32(PINSEL0, pinsel0_value); + + return 0; +} diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile index 4de34fd..7f020b5 100644 --- a/cpu/ixp/npe/Makefile +++ b/cpu/ixp/npe/Makefile @@ -87,7 +87,7 @@ START := $(addprefix $(obj),$(START)) all: $(LIB) -$(LIB): $(obj).depend $(OBJS) +$(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile index db1afa5..9d54201 100644 --- a/cpu/microblaze/Makefile +++ b/cpu/microblaze/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -SOBJS = dcache.o icache.o irq.o disable_int.o enable_int.o +SOBJS = irq.o COBJS = cpu.o interrupts.o cache.o exception.o timer.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c index fc388eb..4f36a84 100644..100755 --- a/cpu/microblaze/cache.c +++ b/cpu/microblaze/cache.c @@ -23,6 +23,7 @@ */ #include <common.h> +#include <asm/asm.h> #if (CONFIG_COMMANDS & CFG_CMD_CACHE) @@ -45,4 +46,20 @@ int icache_status (void) __asm__ __volatile__ ("and %0,%0,%1"::"r" (i), "r" (mask):"memory"); return i; } + +void icache_enable (void) { + MSRSET(0x20); +} + +void icache_disable(void) { + MSRCLR(0x20); +} + +void dcache_enable (void) { + MSRSET(0x80); +} + +void dcache_disable(void) { + MSRCLR(0x80); +} #endif diff --git a/cpu/microblaze/dcache.S b/cpu/microblaze/dcache.S deleted file mode 100644 index eaf9671..0000000 --- a/cpu/microblaze/dcache.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - .text - .globl dcache_enable - .ent dcache_enable - .align 2 -dcache_enable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Set the instruction enable bit */ - ori r12, r12, 0x80 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end dcache_enable - - .text - .globl dcache_disable - .ent dcache_disable - .align 2 -dcache_disable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Clear the data cache enable bit */ - andi r12, r12, ~0x80 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end dcache_disable diff --git a/cpu/microblaze/disable_int.S b/cpu/microblaze/disable_int.S deleted file mode 100644 index aecd795..0000000 --- a/cpu/microblaze/disable_int.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl microblaze_disable_interrupts - .ent microblaze_disable_interrupts - .align 2 -microblaze_disable_interrupts: - #Make space on stack for a temporary - addi r1, r1, -4 - #Save register r12 - swi r12, r1, 0 - #Read the MSR register - mfs r12, rmsr - #Clear the interrupt enable bit - andi r12, r12, ~2 - #Save the MSR register - mts rmsr, r12 - #Load register r12 - lwi r12, r1, 0 - #Return - rtsd r15, 8 - #Update stack in the delay slot - addi r1, r1, 4 - .end microblaze_disable_interrupts diff --git a/cpu/microblaze/enable_int.S b/cpu/microblaze/enable_int.S deleted file mode 100644 index c096c6c..0000000 --- a/cpu/microblaze/enable_int.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstrmonstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl microblaze_enable_interrupts - .ent microblaze_enable_interrupts - .align 2 -microblaze_enable_interrupts: - addi r1, r1, -4 - swi r12, r1, 0 - mfs r12, rmsr - ori r12, r12, 2 - mts rmsr, r12 - lwi r12, r1, 0 - rtsd r15, 8 - addi r1, r1, 4 - .end microblaze_enable_interrupts diff --git a/cpu/microblaze/exception.c b/cpu/microblaze/exception.c index b135acb..d76b05a 100644 --- a/cpu/microblaze/exception.c +++ b/cpu/microblaze/exception.c @@ -23,15 +23,16 @@ */ #include <common.h> +#include <asm/asm.h> void _hw_exception_handler (void) { int address = 0; int state = 0; /* loading address of exception EAR */ - __asm__ __volatile ("mfs %0,rear"::"r" (address):"memory"); + MFS (address, rear); /* loading excetpion state register ESR */ - __asm__ __volatile ("mfs %0,resr"::"r" (state):"memory"); + MFS (state, resr); printf ("Hardware exception at 0x%x address\n", address); switch (state & 0x1f) { /* mask on exception cause */ case 0x1: @@ -49,6 +50,11 @@ void _hw_exception_handler (void) case 0x5: puts ("Divide by zero exception\n"); break; +#ifdef MICROBLAZE_V5 + case 0x1000: + puts ("Exception in delay slot\n"); + break; +#endif default: puts ("Undefined cause\n"); break; diff --git a/cpu/microblaze/icache.S b/cpu/microblaze/icache.S deleted file mode 100644 index 25940d1..0000000 --- a/cpu/microblaze/icache.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl icache_enable - .ent icache_enable - .align 2 -icache_enable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Set the instruction enable bit */ - ori r12, r12, 0x20 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end icache_enable - - .text - .globl icache_disable - .ent icache_disable - .align 2 -icache_disable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Clear the instruction enable bit */ - andi r12, r12, ~0x20 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end icache_disable diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c index 2db847c..b61153f 100644..100755 --- a/cpu/microblaze/interrupts.c +++ b/cpu/microblaze/interrupts.c @@ -27,6 +27,7 @@ #include <common.h> #include <command.h> #include <asm/microblaze_intc.h> +#include <asm/asm.h> #undef DEBUG_INT @@ -35,12 +36,12 @@ extern void microblaze_enable_interrupts (void); void enable_interrupts (void) { - microblaze_enable_interrupts (); + MSRSET(0x2); } int disable_interrupts (void) { - microblaze_disable_interrupts (); + MSRCLR(0x2); return 0; } @@ -48,6 +49,10 @@ int disable_interrupts (void) #ifdef CFG_TIMER_0 extern void timer_init (void); #endif +#ifdef CFG_FSL_2 +extern void fsl_init2 (void); +#endif + static struct irq_action vecs[CFG_INTC_0_NUM]; @@ -106,7 +111,6 @@ void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) act->count = 0; enable_one_interrupt (irq); } else { /* disable */ - act->handler = (interrupt_handler_t *) def_hdlr; act->arg = (void *)irq; disable_one_interrupt (irq); @@ -141,18 +145,22 @@ int interrupts_init (void) #ifdef CFG_TIMER_0 timer_init (); #endif +#ifdef CFG_FSL_2 + fsl_init2 (); +#endif enable_interrupts (); return 0; } void interrupt_handler (void) { - int irqs; - irqs = (intc->isr & intc->ier); /* find active interrupt */ - + int irqs = (intc->isr & intc->ier); /* find active interrupt */ + int i = 1; #ifdef DEBUG_INT + int value; printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); + R14(value); printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); #endif struct irq_action *act = vecs; @@ -165,15 +173,19 @@ void interrupt_handler (void) #endif act->handler (act->arg); act->count++; + intc->iar = i; + return; } irqs >>= 1; act++; + i <<= 1; } - intc->iar = 0xFFFFFFFF; /* erase all events */ -#ifdef DEBUG + +#ifdef DEBUG_INT printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); - printf ("Interrupt handler on %x line, r14\n", irqs); + R14(value); + printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); #endif } #endif diff --git a/cpu/microblaze/irq.S b/cpu/microblaze/irq.S index a4e3fbf..e1fc190 100644..100755 --- a/cpu/microblaze/irq.S +++ b/cpu/microblaze/irq.S @@ -23,6 +23,7 @@ */ #include <config.h> +#include <asm/asm.h> .text .global _interrupt_handler _interrupt_handler: @@ -151,6 +152,11 @@ _interrupt_handler: addi r1, r1, 4 /* enable_interrupt */ +#ifdef XILINX_USE_MSR_INSTR + msrset r0, 2 +#else + /* FIXME unstable in stressed mode - two irqs */ + nop addi r1, r1, -4 swi r12, r1, 0 mfs r12, rmsr @@ -159,6 +165,7 @@ _interrupt_handler: lwi r12, r1, 0 addi r1, r1, 4 nop +#endif bra r14 nop nop diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index ca3befc..3c027ff 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -117,3 +117,36 @@ clear_bss: 3: /* jumping to board_init */ brai board_init 1: bri 1b + +/* + * Read 16bit little endian + */ + .text + .global in16 + .ent in16 + .align 2 +in16: lhu r3, r0, r5 + bslli r4, r3, 8 + bsrli r3, r3, 8 + andi r4, r4, 0xffff + or r3, r3, r4 + rtsd r15, 8 + sext16 r3, r3 + .end in16 + +/* + * Write 16bit little endian + * first parameter(r5) - address, second(r6) - short value + */ + .text + .global out16 + .ent out16 + .align 2 +out16: bslli r3, r6, 8 + bsrli r6, r6, 8 + andi r3, r3, 0xffff + or r3, r3, r6 + sh r3, r0, r5 + rtsd r15, 8 + or r0, r0, r0 + .end out16 diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c index be4fd57..ab1cb12 100644 --- a/cpu/microblaze/timer.c +++ b/cpu/microblaze/timer.c @@ -24,6 +24,7 @@ #include <common.h> #include <asm/microblaze_timer.h> +#include <asm/microblaze_intc.h> volatile int timestamp = 0; @@ -44,9 +45,6 @@ void set_timer (ulong t) #ifdef CFG_INTC_0 #ifdef CFG_TIMER_0 -extern void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, - void *arg); - microblaze_timer_t *tmr = (microblaze_timer_t *) (CFG_TIMER_0_ADDR); void timer_isr (void *arg) diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 813aa79..1eac2bb 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -53,12 +53,16 @@ int checkcpu (void) #else svr = get_svr(); pvr = get_pvr(); - switch (SVR_VER (svr)) { - case SVR_MPC5200: - printf ("MPC5200"); + + switch (pvr) { + case PVR_5200: + printf("MPC5200"); + break; + case PVR_5200B: + printf("MPC5200B"); break; default: - printf ("MPC52?? (SVR %08x)", svr); + printf("Unknown MPC5xxx"); break; } @@ -127,5 +131,9 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enetaddr, 6); } #endif diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index 7e65821..d744030 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -156,21 +156,21 @@ void cpu_init_f (void) *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15); *(vu_long *)(MPC5XXX_XLBARB + 0x70) = CFG_SDRAM_BASE | 0x1d; -# if defined(CFG_IPBSPEED_133) +# if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* Motorola reports IPB should better run at 133 MHz. */ *(vu_long *)MPC5XXX_ADDECR |= 1; /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ addecr = *(vu_long *)MPC5XXX_CDM_CFG; addecr &= ~0x103; -# if defined(CFG_PCISPEED_66) +# if defined(CFG_PCICLK_EQUALS_IPBCLK_DIV2) /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ addecr |= 0x01; # else /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ addecr |= 0x02; -# endif /* CFG_PCISPEED_66 */ +# endif /* CFG_PCICLK_EQUALS_IPBCLK_DIV2 */ *(vu_long *)MPC5XXX_CDM_CFG = addecr; -# endif /* CFG_IPBSPEED_133 */ +# endif /* CFG_IPBCLK_EQUALS_XLBCLK */ /* Configure the XLB Arbiter */ *(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff; *(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111; diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index e59bd85..8136366 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -428,6 +428,13 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) */ fec->eth->imask = 0x00000000; +/* + * In original Promess-provided code PHY initialization is disabled with the + * following comment: "Phy initialization is DISABLED for now. There was a + * problem with running 100 Mbps on PRO board". Thus we temporarily disable + * PHY initialization for the Motion-PRO board, until a proper fix is found. + */ + if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index 4b9dcc8..bb96f77 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a START = start.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - spd_sdram.o qe_io.o + spd_sdram.o qe_io.o pci.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e934ba6..e078f27 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -52,13 +52,26 @@ int checkcpu(void) immr = (immap_t *)CFG_IMMR; - if ((pvr & 0xFFFF0000) != PVR_83xx) { - puts("Not MPC83xx Family!!!\n"); - return -1; + puts("CPU: "); + + switch (pvr & 0xffff0000) { + case PVR_E300C1: + printf("e300c1, "); + break; + + case PVR_E300C2: + printf("e300c2, "); + break; + + case PVR_E300C3: + printf("e300c3, "); + break; + + default: + printf("Unknown core, "); } spridr = immr->sysconf.spridr; - puts("CPU: "); switch(spridr) { case SPR_8349E_REV10: case SPR_8349E_REV11: @@ -124,6 +137,18 @@ int checkcpu(void) case SPR_8321_REV11: puts("MPC8321, "); break; + case SPR_8311_REV10: + puts("MPC8311, "); + break; + case SPR_8311E_REV10: + puts("MPC8311E, "); + break; + case SPR_8313_REV10: + puts("MPC8313, "); + break; + case SPR_8313E_REV10: + puts("MPC8313E, "); + break; default: puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n"); return 0; @@ -133,10 +158,12 @@ int checkcpu(void) /* Multiple revisons of 834x processors may have the same SPRIDR value. * So use PVR to identify the revision number. */ - printf("Rev: %02x at %s MHz\n", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); + printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); #else - printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock)); + printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); #endif + printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + return 0; } diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c new file mode 100644 index 0000000..785d612 --- /dev/null +++ b/cpu/mpc83xx/pci.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2007 + * + * Author: Scott Wood <scottwood@freescale.com>, + * with some bits from older board-specific PCI initialization. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <ft_build.h> +#include <asm/mpc8349_pci.h> + +#ifdef CONFIG_83XX_GENERIC_PCI +#define MAX_BUSES 2 + +DECLARE_GLOBAL_DATA_PTR; + +static struct pci_controller pci_hose[MAX_BUSES]; +static int pci_num_buses; + +static void pci_init_bus(int bus, struct pci_region *reg) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile pot83xx_t *pot = immr->ios.pot; + volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus]; + struct pci_controller *hose = &pci_hose[bus]; + u32 dev; + u16 reg16; + int i; + + if (bus == 1) + pot += 3; + + /* Setup outbound translation windows */ + for (i = 0; i < 3; i++, reg++, pot++) { + if (reg->size == 0) + break; + + hose->regions[i] = *reg; + hose->region_count++; + + pot->potar = reg->bus_start >> 12; + pot->pobar = reg->phys_start >> 12; + pot->pocmr = ~(reg->size - 1) >> 12; + + if (reg->flags & PCI_REGION_IO) + pot->pocmr |= POCMR_IO; +#ifdef CONFIG_83XX_PCI_STREAMING + else if (reg->flags & PCI_REGION_PREFETCH) + pot->pocmr |= POCMR_SE; +#endif + + if (bus == 1) + pot->pocmr |= POCMR_DST; + + pot->pocmr |= POCMR_EN; + } + + /* Point inbound translation at RAM */ + pci_ctrl->pitar1 = 0; + pci_ctrl->pibar1 = 0; + pci_ctrl->piebar1 = 0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + i = hose->region_count++; + hose->regions[i].bus_start = 0; + hose->regions[i].phys_start = 0; + hose->regions[i].size = gd->ram_size; + hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80, + CFG_IMMR + 0x8304 + bus * 0x80); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} + +/* + * The caller must have already set OCCR, and the PCI_LAW BARs + * must have been set to cover all of the requested regions. + * + * If fewer than three regions are requested, then the region + * list is terminated with a region of size 0. + */ +void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + int i; + + if (num_buses > MAX_BUSES) { + printf("%d PCI buses requsted, %d supported\n", + num_buses, MAX_BUSES); + + num_buses = MAX_BUSES; + } + + pci_num_buses = num_buses; + + /* + * Release PCI RST Output signal. + * Power on to RST high must be at least 100 ms as per PCI spec. + * On warm boots only 1 ms is required. + */ + udelay(warmboot ? 1000 : 100000); + + for (i = 0; i < num_buses; i++) + immr->pci_ctrl[i].gcr = 1; + + /* + * RST high to first config access must be at least 2^25 cycles + * as per PCI spec. This could be cut in half if we know we're + * running at 66MHz. This could be insufficiently long if we're + * running the PCI bus at significantly less than 33MHz. + */ + udelay(1020000); + + for (i = 0; i < num_buses; i++) + pci_init_bus(i, reg[i]); +} + +#ifdef CONFIG_OF_FLAT_TREE +void ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + if (pci_num_buses < 1) + return; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + + if (pci_num_buses < 2) + return; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ + +#endif /* CONFIG_83XX_GENERIC_PCI */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index d9b8753..647813f 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -58,8 +58,8 @@ picos_to_clk(int picos) int clks; ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / ((1000000000 / ddr_bus_clk) * 1000); - if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0) + clks = picos / (1000000000 / (ddr_bus_clk / 1000)); + if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) clks++; return clks; @@ -624,7 +624,7 @@ long int spd_sdram() | (1 << (16 + 10)) /* DQS Differential disable */ | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */ | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */ - | ((twr_clk >> 1) << 9) /* Write Recovery Autopre */ + | ((twr_clk - 1) << 9) /* Write Recovery Autopre */ | (caslat << 4) /* caslat */ | (burstlen << 0) /* Burst length */ ); @@ -693,11 +693,6 @@ long int spd_sdram() #ifdef CFG_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */ ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; -#else - /* SS_EN = 0, source synchronous disable - * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd - */ - ddr->sdram_clk_cntl = 0x00000000; #endif debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index c759930..bf30616 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -25,6 +25,7 @@ #include <common.h> #include <mpc83xx.h> +#include <command.h> #include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; @@ -99,12 +100,14 @@ int get_clocks(void) u32 lcrr; u32 csb_clk; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) u32 tsec1_clk; u32 tsec2_clk; - u32 usbmph_clk; u32 usbdr_clk; #endif +#ifdef CONFIG_MPC834X + u32 usbmph_clk; +#endif u32 core_clk; u32 i2c1_clk; #if !defined(CONFIG_MPC832X) @@ -148,7 +151,7 @@ int get_clocks(void) sccr = im->clk.sccr; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -167,6 +170,26 @@ int get_clocks(void) return -4; } + switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { + case 0: + usbdr_clk = 0; + break; + case 1: + usbdr_clk = csb_clk; + break; + case 2: + usbdr_clk = csb_clk / 2; + break; + case 3: + usbdr_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_USBDRCM value */ + return -8; + } +#endif + +#if defined(CONFIG_MPC834X) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -205,24 +228,6 @@ int get_clocks(void) return -7; } - switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { - case 0: - usbdr_clk = 0; - break; - case 1: - usbdr_clk = csb_clk; - break; - case 2: - usbdr_clk = csb_clk / 2; - break; - case 3: - usbdr_clk = csb_clk / 3; - break; - default: - /* unkown SCCR_USBDRCM value */ - return -8; - } - if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { /* if USB MPH clock is not disabled and * USB DR clock is not disabled then @@ -230,8 +235,16 @@ int get_clocks(void) */ return -9; } +#elif defined(CONFIG_MPC831X) + tsec2_clk = tsec1_clk; + + if (!(sccr & SCCR_TSEC1ON)) + tsec1_clk = 0; + if (!(sccr & SCCR_TSEC2ON)) + tsec2_clk = 0; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + +#if !defined(CONFIG_MPC834X) i2c1_clk = csb_clk; #endif #if !defined(CONFIG_MPC832X) @@ -314,12 +327,14 @@ int get_clocks(void) #endif gd->csb_clk = csb_clk; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; - gd->usbmph_clk = usbmph_clk; gd->usbdr_clk = usbdr_clk; #endif +#if defined(CONFIG_MPC834X) + gd->usbmph_clk = usbmph_clk; +#endif gd->core_clk = core_clk; gd->i2c1_clk = i2c1_clk; #if !defined(CONFIG_MPC832X) @@ -351,11 +366,11 @@ ulong get_bus_freq(ulong dummy) return gd->csb_clk; } -int print_clock_conf(void) +int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { printf("Clock configuration:\n"); - printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); printf(" Core: %4d MHz\n", gd->core_clk / 1000000); + printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) printf(" QE: %4d MHz\n", gd->qe_clk / 1000000); printf(" BRG: %4d MHz\n", gd->brg_clk / 1000000); @@ -371,11 +386,18 @@ int print_clock_conf(void) #if !defined(CONFIG_MPC832X) printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); #endif -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); - printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000); #endif +#if defined(CONFIG_MPC834X) + printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); +#endif return 0; } + +U_BOOT_CMD(clocks, 1, 0, do_clocks, + "clocks - print clock configuration\n", + " clocks\n" +); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 0507c47..7735a52 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004,2007 Freescale Semiconductor, Inc. * (C) Copyright 2002, 2003 Motorola Inc. * Xianghua Xiao (X.Xiao@motorola.com) * @@ -70,6 +70,15 @@ int checkcpu (void) case SVR_8548_E: puts("8548_E"); break; + case SVR_8544: + puts("8544"); + break; + case SVR_8544_E: + puts("8544_E"); + break; + case SVR_8568_E: + puts("8568_E"); + break; default: puts("Unknown"); break; @@ -112,7 +121,7 @@ int checkcpu (void) #endif clkdiv = lcrr & 0x0f; if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#ifdef CONFIG_MPC8548 +#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) /* * Yes, the entire PQ38 family use the same * bit-representation for twice the clock divider values. @@ -140,16 +149,25 @@ int checkcpu (void) int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { + uint pvr; + uint ver; + pvr = get_pvr(); + ver = PVR_VER(pvr); + if (ver & 1){ + /* e500 v2 core has reset control register */ + volatile unsigned int * rstcr; + rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0); + *rstcr = 0x2; /* HRESET_REQ */ + }else{ /* * Initiate hard reset in debug control register DBCR0 * Make sure MSR[DE] = 1 */ - unsigned long val; - - val = mfspr(DBCR0); - val |= 0x70000000; - mtspr(DBCR0,val); - + unsigned long val; + val = mfspr(DBCR0); + val |= 0x70000000; + mtspr(DBCR0,val); + } return 1; } @@ -183,9 +201,9 @@ reset_85xx_watchdog(void) * Clear TSR(WIS) bit by writing 1 */ unsigned long val; - val = mfspr(tsr); - val |= 0x40000000; - mtspr(tsr, val); + val = mfspr(SPRN_TSR); + val |= TSR_WIS; + mtspr(SPRN_TSR, val); } #endif /* CONFIG_WATCHDOG */ @@ -196,6 +214,7 @@ void dma_init(void) { dma->satr0 = 0x02c40000; dma->datr0 = 0x02c40000; + dma->sr0 = 0xfffffff; /* clear any errors */ asm("sync; isync; msync"); return; } @@ -210,6 +229,10 @@ uint dma_check(void) { status = dma->sr0; } + /* clear MR0[CS] channel start bit */ + dma->mr0 &= 0x00000001; + asm("sync;isync;msync"); + if (status != 0) { printf ("DMA Error: status = %x\n", status); } @@ -245,6 +268,10 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); + p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); if (p != NULL) *p = cpu_to_be32(clock); @@ -255,21 +282,41 @@ ft_cpu_setup(void *blob, bd_t *bd) #if defined(CONFIG_MPC85XX_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enetaddr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); + if (p) memcpy(p, bd->bi_enetaddr, 6); #endif #if defined(CONFIG_HAS_ETH1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet1addr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); + if (p) memcpy(p, bd->bi_enet1addr, 6); #endif #if defined(CONFIG_HAS_ETH2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); + if (p) memcpy(p, bd->bi_enet2addr, 6); #endif #if defined(CONFIG_HAS_ETH3) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); + if (p) memcpy(p, bd->bi_enet3addr, 6); #endif diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 9f4d36c..9517146 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -143,12 +143,10 @@ void cpu_init_f (void) memctl->br1 = CFG_BR1_PRELIM; #endif -#if !defined(CONFIG_MPC85xx) #if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM) memctl->or2 = CFG_OR2_PRELIM; memctl->br2 = CFG_BR2_PRELIM; #endif -#endif #if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM) memctl->or3 = CFG_OR3_PRELIM; diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 84f839a..3c1a323 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -90,14 +90,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose) pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff; pcix->powbear1 = 0x00000000; pcix->powar1 = (POWAR_EN | POWAR_MEM_READ | - POWAR_MEM_WRITE | POWAR_MEM_512M); + POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1)); pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff; pcix->potear2 = 0x00000000; pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff; pcix->powbear2 = 0x00000000; pcix->powar2 = (POWAR_EN | POWAR_IO_READ | - POWAR_IO_WRITE | POWAR_IO_1M); + POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1)); pcix->pitar1 = 0x00000000; pcix->piwbar1 = 0x00000000; @@ -175,14 +175,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose) pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff; pcix2->powbear1 = 0x00000000; pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ | - POWAR_MEM_WRITE | POWAR_MEM_512M); + POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1)); pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff; pcix2->potear2 = 0x00000000; pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff; pcix2->powbear2 = 0x00000000; pcix2->powar2 = (POWAR_EN | POWAR_IO_READ | - POWAR_IO_WRITE | POWAR_IO_1M); + POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1)); pcix2->pitar1 = 0x00000000; pcix2->piwbar1 = 0x00000000; diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c index 6da5367..3777f49 100644 --- a/cpu/mpc85xx/spd_sdram.c +++ b/cpu/mpc85xx/spd_sdram.c @@ -263,13 +263,14 @@ spd_sdram(void) } /* - * Adjust DDR II IO voltage biasing. It just makes it work. + * Adjust DDR II IO voltage biasing. + * Only 8548 rev 1 needs the fix */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) { - gur->ddrioovcr = (0 - | 0x80000000 /* Enable */ - | 0x10000000 /* VSEL to 1.8V */ - ); + if ((SVR_VER(get_svr()) == SVR_8548_E) && + (SVR_MJREV(get_svr()) == 1) && + (spd.mem_type == SPD_MEMTYPE_DDR2)) { + gur->ddrioovcr = (0x80000000 /* Enable */ + | 0x10000000);/* VSEL to 1.8V */ } /* @@ -786,14 +787,17 @@ spd_sdram(void) * Is this an ECC DDR chip? * But don't mess with it if the DDR controller will init mem. */ -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +#ifdef CONFIG_DDR_ECC if (spd.config == 0x02) { +#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER ddr->err_disable = 0x0000000d; +#endif ddr->err_sbe = 0x00ff0000; } + debug("DDR: err_disable = 0x%08x\n", ddr->err_disable); debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe); -#endif +#endif /* CONFIG_DDR_ECC */ asm("sync;isync;msync"); udelay(500); @@ -991,17 +995,24 @@ setup_laws_and_tlbs(unsigned int memsize) break; case 256: case 512: + tlb_size = BOOKE_PAGESZ_256M; + break; case 1024: case 2048: - tlb_size = BOOKE_PAGESZ_256M; + if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx)) + tlb_size = BOOKE_PAGESZ_1G; + else + tlb_size = BOOKE_PAGESZ_256M; break; default: puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n"); /* * The memory was not able to be mapped. + * Default to a small size. */ - return 0; + tlb_size = BOOKE_PAGESZ_64M; + memsize=64; break; } diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index ca81ee7..12359a2 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -37,49 +37,21 @@ void get_sys_info (sys_info_t * sysInfo) { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; - uint plat_ratio,e500_ratio; + uint plat_ratio,e500_ratio,half_freqSystemBus; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - switch(plat_ratio) { - case 0x02: - case 0x03: - case 0x04: - case 0x05: - case 0x06: - case 0x08: - case 0x09: - case 0x0a: - case 0x0c: - case 0x10: - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; - break; - default: - sysInfo->freqSystemBus = 0; - break; - } - + sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; e500_ratio = (gur->porpllsr) & 0x003f0000; e500_ratio >>= 16; - switch(e500_ratio) { - case 0x04: - sysInfo->freqProcessor = 2*sysInfo->freqSystemBus; - break; - case 0x05: - sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2; - break; - case 0x06: - sysInfo->freqProcessor = 3*sysInfo->freqSystemBus; - break; - case 0x07: - sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2; - break; - default: - sysInfo->freqProcessor = 0; - break; - } + + /* Divide before multiply to avoid integer + * overflow for processor speeds above 2GHz */ + half_freqSystemBus = sysInfo->freqSystemBus/2; + sysInfo->freqProcessor = e500_ratio*half_freqSystemBus; } + int get_clocks (void) { sys_info_t sys_info; diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index f96a4c3..20c7ebc 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -251,13 +251,10 @@ _start_e500: */ bl tlb1_entry mr r5,r0 - li r1,0x0020 /* max 16 TLB1 plus some TLB0 entries */ - mtctr r1 lwzu r4,0(r5) /* how many TLB1 entries we actually use */ + mtctr r4 -0: cmpwi r4,0 - beq 1f - lwzu r0,4(r5) +0: lwzu r0,4(r5) lwzu r1,4(r5) lwzu r2,4(r5) lwzu r3,4(r5) @@ -269,7 +266,6 @@ _start_e500: msync tlbwe isync - addi r4,r4,-1 bdnz 0b 1: @@ -301,20 +297,16 @@ _start_e500: bl law_entry mr r6,r0 - li r1,0x0007 /* 8 LAWs, but reserve one for boot-over-rio-or-pci */ - mtctr r1 lwzu r5,0(r6) /* how many windows we actually use */ + mtctr r5 li r2,0x0c28 /* the first pair is reserved for boot-over-rio-or-pci */ li r1,0x0c30 -0: cmpwi r5,0 - beq 1f - lwzu r4,4(r6) +0: lwzu r4,4(r6) lwzu r3,4(r6) stwx r4,r7,r2 stwx r3,r7,r1 - addi r5,r5,-1 addi r2,r2,0x0020 addi r1,r1,0x0020 bdnz 0b diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 84f5bef..a33acfe 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -280,22 +280,38 @@ ft_cpu_setup(void *blob, bd_t *bd) #if defined(CONFIG_MPC86XX_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); - memcpy(p, bd->bi_enetaddr, 6); + if (p != NULL) + memcpy(p, bd->bi_enetaddr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enetaddr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); - memcpy(p, bd->bi_enet1addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet1addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet1addr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC3) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); - memcpy(p, bd->bi_enet2addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet2addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet2addr, 6); #endif #if defined(CONFIG_MPC86XX_TSEC4) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); - memcpy(p, bd->bi_enet3addr, 6); + if (p != NULL) + memcpy(p, bd->bi_enet3addr, 6); + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enet3addr, 6); #endif } diff --git a/cpu/mpc86xx/resetvec.S b/cpu/mpc86xx/resetvec.S deleted file mode 100644 index 9a552f6..0000000 --- a/cpu/mpc86xx/resetvec.S +++ /dev/null @@ -1,2 +0,0 @@ - .section .resetvec,"ax" - b _start diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index ac9ff81..f37ab43 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -51,20 +51,32 @@ extern int dma_xfer(void *dest, uint count, void *src); #define CFG_SUPER_BANK_INTERLEAVING 0 /* - * Convert picoseconds into clock cycles (rounding up if needed). + * Convert picoseconds into DRAM clock cycles (rounding up if needed). */ -int -picos_to_clk(int picos) +static unsigned int +picos_to_clk(unsigned int picos) { - int clks; - - clks = picos / (2000000000 / (get_bus_freq(0) / 1000)); - if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) { + /* use unsigned long long to avoid rounding errors */ + const unsigned long long ULL_2e12 = 2000000000000ULL; + unsigned long long clks; + unsigned long long clks_temp; + + if (! picos) + return 0; + + clks = get_bus_freq(0) * (unsigned long long) picos; + clks_temp = clks; + clks = clks / ULL_2e12; + if (clks_temp % ULL_2e12) { clks++; } - return clks; + if (clks > 0xFFFFFFFFULL) { + clks = 0xFFFFFFFFULL; + } + + return (unsigned int) clks; } diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 7406fe2..67c56db 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -241,26 +241,40 @@ in_flash: bl setup_ccsrbar #endif - /* Fix for SMP linux - Changing arbitration to round-robin */ - lis r3, CFG_CCSRBAR@h - ori r3, r3, 0x1000 - xor r4, r4, r4 - li r4, 0x1000 - stw r4, 0(r3) - /* setup the law entries */ - bl law_entry + /* -- MPC8641 Rev 1.0 MCM Errata fixups -- */ + + /* skip fixups if not Rev 1.0 */ + mfspr r4, SVR + rlwinm r4,r4,0,24,31 + cmpwi r4,0x10 + bne 1f + + lis r3,MCM_ABCR@ha + lwz r4,MCM_ABCR@l(r3) /* ABCR -> r4 */ + + /* set ABCR[A_STRM_CNT] = 0 */ + rlwinm r4,r4,0,0,29 + + /* set ABCR[ARB_POLICY] to 0x1 (round-robin) */ + addi r0,r0,1 + rlwimi r4,r0,12,18,19 + + stw r4,MCM_ABCR@l(r3) /* r4 -> ABCR */ sync - /* Don't use this feature due to bug in 8641D PD4 */ - /* Disable ERD_DIS */ - lis r3, CFG_CCSRBAR@h - ori r3, r3, 0x1008 - lwz r4, 0(r3) + /* Set DBCR[ERD_DIS] */ + lis r3,MCM_DBCR@ha + lwz r4,MCM_DBCR@l(r3) oris r4, r4, 0x4000 - stw r4, 0(r3) + stw r4,MCM_DBCR@l(r3) + sync +1: + /* setup the law entries */ + bl law_entry sync + #if (EMULATOR_RUN == 1) /* On the emulator we want to adjust these ASAP */ /* otherwise things are sloooow */ diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 7134355..8bf03e1 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); } -#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3)) +#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3)) /* *As is these functs get called out of flash Not a horrible diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 10b4c18..c500d3f 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -20,7 +20,7 @@ * Jun Gu, Artesyn Technology, jung@artesyncp.com * Support for AMCC 440 based on OpenBIOS draminit.c from IBM. * - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -42,6 +42,11 @@ * MA 02111-1307 USA */ +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + #include <common.h> #include <asm/processor.h> #include <i2c.h> @@ -246,25 +251,6 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif -const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { - {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF}, - {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000}, - {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555}, - {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA}, - {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A}, - {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5}, - {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA}, - {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55} -}; - /* bank_parms is used to sort the bank sizes by descending order */ struct bank_param { unsigned long cr; @@ -278,46 +264,37 @@ extern unsigned char cfg_simulate_spd_eeprom[128]; #endif void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); -unsigned char spd_read(uchar chip, uint addr); - -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_mem_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_volt_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr1 (void); - -void program_ecc (unsigned long num_bytes); +static unsigned char spd_read(uchar chip, uint addr); +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr1(void); + +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes); +#endif -unsigned -long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); /* * This function is reading data from the DIMM module EEPROM over the SPD bus @@ -328,7 +305,6 @@ long program_bxcr(unsigned long* dimm_populated, * BUG: Don't handle ECC memory * BUG: A few values in the TR register is currently hardcoded */ - long int spd_sdram(void) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_populated[sizeof(iic0_dimm_addr)]; @@ -421,9 +397,8 @@ long int spd_sdram(void) { */ while (1) { mfsdram(mem_mcsts, mcsts); - if ((mcsts & SDRAM_MCSTS_MRSC) != 0) { + if ((mcsts & SDRAM_MCSTS_MRSC) != 0) break; - } } /* @@ -431,14 +406,17 @@ long int spd_sdram(void) { */ program_tr1(); +#ifdef CONFIG_DDR_ECC /* - * if ECC is enabled, initialize parity bits + * If ecc is enabled, initialize the parity bits. */ + program_ecc(total_size); +#endif return total_size; } -unsigned char spd_read(uchar chip, uint addr) +static unsigned char spd_read(uchar chip, uint addr) { unsigned char data[2]; @@ -460,9 +438,9 @@ unsigned char spd_read(uchar chip, uint addr) return 0; } -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long dimm_found; @@ -480,14 +458,10 @@ void get_spd_info(unsigned long* dimm_populated, if ((num_of_bytes != 0) && (total_size != 0)) { dimm_populated[dimm_num] = TRUE; dimm_found = TRUE; -#if 0 - printf("DIMM slot %lu: populated\n", dimm_num); -#endif + debug("DIMM slot %lu: populated\n", dimm_num); } else { dimm_populated[dimm_num] = FALSE; -#if 0 - printf("DIMM slot %lu: Not populated\n", dimm_num); -#endif + debug("DIMM slot %lu: Not populated\n", dimm_num); } } @@ -497,9 +471,9 @@ void get_spd_info(unsigned long* dimm_populated, } } -void check_mem_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned char dimm_type; @@ -509,9 +483,7 @@ void check_mem_type(unsigned long* dimm_populated, dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); switch (dimm_type) { case 7: -#if 0 - printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); -#endif + debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); break; default: printf("ERROR: Unsupported DIMM detected in slot %lu.\n", @@ -525,10 +497,9 @@ void check_mem_type(unsigned long* dimm_populated, } } - -void check_volt_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long voltage_type; @@ -541,18 +512,16 @@ void check_volt_type(unsigned long* dimm_populated, dimm_num); hang(); } else { -#if 0 - printf("DIMM %lu voltage level supported.\n", dimm_num); -#endif + debug("DIMM %lu voltage level supported.\n", dimm_num); } break; } } } -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long cfg0; @@ -640,9 +609,9 @@ void program_cfg0(unsigned long* dimm_populated, mtsdram(mem_cfg0, cfg0); } -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long cfg1; mfsdram(mem_cfg1, cfg1); @@ -658,9 +627,9 @@ void program_cfg1(unsigned long* dimm_populated, mtsdram(mem_cfg1, cfg1); } -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bus_period_x_10; @@ -676,7 +645,6 @@ void program_rtr (unsigned long* dimm_populated, get_sys_info(&sys_info); bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { if (dimm_populated[dimm_num] == TRUE) { refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12); @@ -719,9 +687,9 @@ void program_rtr (unsigned long* dimm_populated, mtsdram(mem_rtr, sdram_rtr); } -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long tr0; @@ -1001,13 +969,73 @@ void program_tr0 (unsigned long* dimm_populated, break; } -#if 0 - printf("tr0: %x\n", tr0); -#endif + debug("tr0: %x\n", tr0); mtsdram(mem_tr0, tr0); } -void program_tr1 (void) +static int short_mem_test(void) +{ + unsigned long i, j; + unsigned long bxcr_num; + unsigned long *membase; + const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { + {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}}; + + for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { + mtdcr(memcfga, mem_b0cr + (bxcr_num << 2)); + if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { + /* Bank is enabled */ + membase = (unsigned long*) + (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); + + /* + * Run the short memory test + */ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + membase[j] = test[i][j]; + ppcDcbf((unsigned long)&(membase[j])); + } + + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((unsigned long)&(membase[j])); + return 0; + } + ppcDcbf((unsigned long)&(membase[j])); + } + + if (j < NUMMEMWORDS) + return 0; + } + + /* + * see if the rdclt value passed + */ + if (i < NUMMEMTESTS) + return 0; + } + } + + return 1; +} + +static void program_tr1(void) { unsigned long tr0; unsigned long tr1; @@ -1015,8 +1043,7 @@ void program_tr1 (void) unsigned long ecc_temp; unsigned long dlycal; unsigned long dly_val; - unsigned long i, j, k; - unsigned long bxcr_num; + unsigned long k; unsigned long max_pass_length; unsigned long current_pass_length; unsigned long current_fail_length; @@ -1029,7 +1056,6 @@ void program_tr1 (void) unsigned char window_found; unsigned char fail_found; unsigned char pass_found; - unsigned long * membase; PPC440_SYS_INFO sys_info; /* @@ -1079,55 +1105,16 @@ void program_tr1 (void) window_found = FALSE; fail_found = FALSE; pass_found = FALSE; -#ifdef DEBUG - printf("Starting memory test "); -#endif + debug("Starting memory test "); + for (k = 0; k < NUMHALFCYCLES; k++) { - for (rdclt = 0; rdclt < dly_val; rdclt++) { + for (rdclt = 0; rdclt < dly_val; rdclt++) { /* * Set the timing reg for the test. */ mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); - for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { - mtdcr(memcfga, mem_b0cr + (bxcr_num<<2)); - if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { - /* Bank is enabled */ - membase = (unsigned long*) - (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); - - /* - * Run the short memory test - */ - for (i = 0; i < NUMMEMTESTS; i++) { - for (j = 0; j < NUMMEMWORDS; j++) { - membase[j] = test[i][j]; - ppcDcbf((unsigned long)&(membase[j])); - } - - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { - ppcDcbf((unsigned long)&(membase[j])); - break; - } - ppcDcbf((unsigned long)&(membase[j])); - } - - if (j < NUMMEMWORDS) { - break; - } - } - - /* - * see if the rdclt value passed - */ - if (i < NUMMEMTESTS) { - break; - } - } - } - - if (bxcr_num == MAXBXCR) { + if (short_mem_test()) { if (fail_found == TRUE) { pass_found = TRUE; if (current_pass_length == 0) { @@ -1157,9 +1144,8 @@ void program_tr1 (void) } } } -#ifdef DEBUG - printf("."); -#endif + debug("."); + if (window_found == TRUE) { break; } @@ -1167,9 +1153,7 @@ void program_tr1 (void) tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK; rdclt_offset += dly_val; } -#ifdef DEBUG - printf("\n"); -#endif + debug("\n"); /* * make sure we find the window @@ -1218,18 +1202,17 @@ void program_tr1 (void) } tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average); -#if 0 - printf("tr1: %x\n", tr1); -#endif + debug("tr1: %x\n", tr1); + /* * program SDRAM Timing Register 1 TR1 */ mtsdram(mem_tr1, tr1); } -unsigned long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bank_base_addr; @@ -1262,8 +1245,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, #ifdef CONFIG_BAMBOO /* * This next section is hardware dependent and must be programmed - * to match the hardware. For bammboo, the following holds... - * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 + * to match the hardware. For bamboo, the following holds... + * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard) * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1 * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1 * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3 @@ -1273,10 +1256,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, ctrl_bank_num[1] = 1; ctrl_bank_num[2] = 3; #else + /* + * Ocotea, Ebony and the other IBM/AMCC eval boards have + * 2 DIMM slots with each max 2 banks + */ ctrl_bank_num[0] = 0; - ctrl_bank_num[1] = 1; - ctrl_bank_num[2] = 2; - ctrl_bank_num[3] = 3; + ctrl_bank_num[1] = 2; #endif /* @@ -1290,6 +1275,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); num_banks = spd_read(iic0_dimm_addr[dimm_num], 5); bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31); + debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num, + num_row_addr, num_col_addr, num_banks); /* * Set the SDRAM0_BxCR regs @@ -1354,9 +1341,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, cr |= SDRAM_BXCR_SDBE; for (i = 0; i < num_banks; i++) { - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes = - (4 * 1024 * 1024) * bank_size_id; - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr; + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = + (4 << 20) * bank_size_id; + bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; + debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", + dimm_num, i, ctrl_bank_num[dimm_num]+i, + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); } } } @@ -1400,13 +1390,15 @@ unsigned long program_bxcr(unsigned long* dimm_populated, bank_parms[sorted_bank_num[bx_cr_num]].cr; mtdcr(memcfgd, temp); bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes; + debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp); } } return(bank_base_addr); } -void program_ecc (unsigned long num_bytes) +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes) { unsigned long bank_base_addr; unsigned long current_address; @@ -1425,14 +1417,12 @@ void program_ecc (unsigned long num_bytes) bank_base_addr = CFG_SDRAM_BASE; if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) { - mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | - SDRAM_CFG0_MCHK_GEN); + mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN); - if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) { + if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) address_increment = 4; - } else { + else address_increment = 8; - } current_address = (unsigned long)(bank_base_addr); end_address = (unsigned long)(bank_base_addr) + num_bytes; @@ -1446,4 +1436,5 @@ void program_ecc (unsigned long num_bytes) SDRAM_CFG0_MCHK_CHK); } } +#endif /* CONFIG_DDR_ECC */ #endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 2ecd3e4..48b9ee2 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -465,7 +465,11 @@ long int initdram(int board_type) * Set the SDRAM Clock Timing Register *-----------------------------------------------------------------*/ mfsdram(SDRAM_CLKTR, val); +#ifdef CFG_44x_DDR2_CKTR_180 + mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV); +#else mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG); +#endif /*------------------------------------------------------------------ * Program the BxCF registers. @@ -1117,7 +1121,8 @@ static void program_codt(unsigned long *dimm_populated, modt3 = 0x00000000; } if (total_rank == 4) { - codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3); + codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | + CALC_ODT_R(2) | CALC_ODT_R(3); modt0 = CALC_ODT_RW(2); modt1 = 0x00000000; modt2 = CALC_ODT_RW(0); diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index cf56581..1200d02 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -339,29 +339,41 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) { unsigned long zmiifer=0x0; + unsigned long pfc1; - /* - * Right now only 2*RGMII is supported. Please extend when needed. - * sr - 2006-08-29 - */ - switch (1) { - case 0: + mfsdr(sdr_pfc1, pfc1); + pfc1 &= SDR0_PFC1_SELECT_MASK; + + switch (pfc1) { + case SDR0_PFC1_SELECT_CONFIG_2: /* 1 x GMII port */ out32 (ZMII_FER, 0x00); out32 (RGMII_FER, 0x00000037); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; - case 1: + case SDR0_PFC1_SELECT_CONFIG_4: /* 2 x RGMII ports */ out32 (ZMII_FER, 0x00); out32 (RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; - case 2: + case SDR0_PFC1_SELECT_CONFIG_6: /* 2 x SMII ports */ - + out32 (ZMII_FER, + ((ZMII_FER_SMII) << ZMII_FER_V(0)) | + ((ZMII_FER_SMII) << ZMII_FER_V(1))); + out32 (RGMII_FER, 0x00000000); + bis->bi_phymode[0] = BI_PHYMODE_SMII; + bis->bi_phymode[1] = BI_PHYMODE_SMII; + break; + case SDR0_PFC1_SELECT_CONFIG_1_2: + /* only 1 x MII supported */ + out32 (ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); + out32 (RGMII_FER, 0x00000000); + bis->bi_phymode[0] = BI_PHYMODE_MII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; break; default: break; diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 8e6bc84..c07bc0c 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -139,6 +139,7 @@ static char *bootstrap_str[] = { "Reserved", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' }; #endif #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) @@ -149,6 +150,7 @@ static char *bootstrap_str[] = { "I2C (Addr 0x54)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D'}; #endif #if defined(CONFIG_440EP) || defined(CONFIG_440GR) @@ -163,6 +165,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) @@ -177,6 +180,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_405EZ) @@ -199,6 +203,8 @@ static char *bootstrap_str[] = { "SPI (slow)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \ + 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' }; #endif #if defined(SDR0_PINSTP_SHIFT) @@ -427,7 +433,7 @@ int checkcpu (void) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); #endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) - printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); + printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c index b198ff4..f63fc79 100644 --- a/cpu/ppc4xx/ndfc.c +++ b/cpu/ppc4xx/ndfc.c @@ -3,7 +3,7 @@ * Platform independend driver for NDFC (NanD Flash Controller) * integrated into EP440 cores * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Based on original work by @@ -33,12 +33,15 @@ #if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \ (defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX)) + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_405EZ)) #include <nand.h> #include <linux/mtd/ndfc.h> +#include <linux/mtd/nand_ecc.h> #include <asm/processor.h> -#include <ppc440.h> +#include <asm/io.h> +#include <ppc4xx.h> static u8 hwctl = 0; @@ -69,11 +72,11 @@ static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte) ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; if (hwctl & 0x1) - out8(base + NDFC_CMD, byte); + out_8((u8 *)(base + NDFC_CMD), byte); else if (hwctl & 0x2) - out8(base + NDFC_ALE, byte); + out_8((u8 *)(base + NDFC_ALE), byte); else - out8(base + NDFC_DATA, byte); + out_8((u8 *)(base + NDFC_DATA), byte); } static u_char ndfc_read_byte(struct mtd_info *mtdinfo) @@ -81,7 +84,7 @@ static u_char ndfc_read_byte(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - return (in8(base + NDFC_DATA)); + return (in_8((u8 *)(base + NDFC_DATA))); } static int ndfc_dev_ready(struct mtd_info *mtdinfo) @@ -89,17 +92,41 @@ static int ndfc_dev_ready(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY)) + while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY)) ; return 1; } -#ifndef CONFIG_NAND_SPL -/* - * Don't use these speedup functions in NAND boot image, since the image - * has to fit into 4kByte. - */ +static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ccr; + + ccr = in_be32((u32 *)(base + NDFC_CCR)); + ccr |= NDFC_CCR_RESET_ECC; + out_be32((u32 *)(base + NDFC_CCR), ccr); +} + +static int ndfc_calculate_ecc(struct mtd_info *mtdinfo, + const u_char *dat, u_char *ecc_code) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ecc; + u8 *p = (u8 *)&ecc; + + ecc = in_be32((u32 *)(base + NDFC_ECC)); + + /* The NDFC uses Smart Media (SMC) bytes order + */ + ecc_code[0] = p[2]; + ecc_code[1] = p[1]; + ecc_code[2] = p[3]; + + return 0; +} /* * Speedups for buffer read/write/verify @@ -115,9 +142,14 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) uint32_t *p = (uint32_t *) buf; for (;len > 0; len -= 4) - *p++ = in32(base + NDFC_DATA); + *p++ = in_be32((u32 *)(base + NDFC_DATA)); } +#ifndef CONFIG_NAND_SPL +/* + * Don't use these speedup functions in NAND boot image, since the image + * has to fit into 4kByte. + */ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) { struct nand_chip *this = mtdinfo->priv; @@ -125,7 +157,7 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - out32(base + NDFC_DATA, *p++); + out_be32((u32 *)(base + NDFC_DATA), *p++); } static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) @@ -135,7 +167,7 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - if (*p++ != in32(base + NDFC_DATA)) + if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) return -1; return 0; @@ -152,8 +184,8 @@ void board_nand_select_device(struct nand_chip *nand, int chip) ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; /* Set NandFlash Core Configuration Register */ - /* 1col x 2 rows */ - out32(base + NDFC_CCR, 0x00000000 | (cs << 24)); + /* 1 col x 2 rows */ + out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24)); } int board_nand_init(struct nand_chip *nand) @@ -161,23 +193,25 @@ int board_nand_init(struct nand_chip *nand) int cs = (ulong)nand->IO_ADDR_W & 0x00000003; ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; - nand->eccmode = NAND_ECC_SOFT; - nand->hwcontrol = ndfc_hwcontrol; nand->read_byte = ndfc_read_byte; + nand->read_buf = ndfc_read_buf; nand->write_byte = ndfc_write_byte; nand->dev_ready = ndfc_dev_ready; + nand->eccmode = NAND_ECC_HW3_256; + nand->enable_hwecc = ndfc_enable_hwecc; + nand->calculate_ecc = ndfc_calculate_ecc; + nand->correct_data = nand_correct_data; + #ifndef CONFIG_NAND_SPL nand->write_buf = ndfc_write_buf; - nand->read_buf = ndfc_read_buf; nand->verify_buf = ndfc_verify_buf; #else /* * Setup EBC (CS0 only right now) */ - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xb8400000); + mtebc(EBC0_CFG, 0xb8400000); mtebc(pb0cr, CFG_EBC_PB0CR); mtebc(pb0ap, CFG_EBC_PB0AP); @@ -187,7 +221,7 @@ int board_nand_init(struct nand_chip *nand) * Select required NAND chip in NDFC */ board_nand_select_device(nand, cs); - out32(base + NDFC_BCFG0 + (cs << 2), 0x80002222); + out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222); return 0; } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index a96083c..78d0042 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -110,6 +110,13 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ +#define function_prolog(func_name) .text; \ + .align 2; \ + .globl func_name; \ + func_name: +#define function_epilog(func_name) .type func_name,@function; \ + .size func_name,.-func_name + /* We don't want the MMU yet. */ #undef MSR_KERNEL @@ -148,7 +155,9 @@ * NAND U-Boot image is started from offset 0 */ .text +#if defined(CONFIG_440) bl reconfig_tlb0 +#endif GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f @@ -388,8 +397,9 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ 2: #if defined(CONFIG_NAND_SPL) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* - * Enable internal SRAM + * Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM) */ lis r2,0x7fff ori r2,r2,0xffff @@ -399,6 +409,45 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ mfdcr r1,isram0_pmeg and r1,r1,r2 /* Disable pwr mgmt */ mtdcr isram0_pmeg,r1 +#endif +#if defined(CONFIG_440EP) + /* + * On 440EP with no internal SRAM, we setup SDRAM very early + * and copy the NAND_SPL to SDRAM and jump to it + */ + /* Clear Dcache to use as RAM */ + addis r3,r0,CFG_INIT_RAM_ADDR@h + ori r3,r3,CFG_INIT_RAM_ADDR@l + addis r4,r0,CFG_INIT_RAM_END@h + ori r4,r4,CFG_INIT_RAM_END@l + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ran3 + addi r5,r5,0x0001 +..d_ran3: + mtctr r5 +..d_ag3: + dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag3 + /*----------------------------------------------------------------*/ + /* Setup the stack in internal SRAM */ + /*----------------------------------------------------------------*/ + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + li r0,0 + stwu r0,-4(r1) + stwu r0,-4(r1) /* Terminate call chain */ + + stwu r1,-8(r1) /* Save back chain and move SP */ + lis r0,RESET_VECTOR@h /* Address of reset vector */ + ori r0,r0, RESET_VECTOR@l + stwu r1,-8(r1) /* Save back chain and move SP */ + stw r0,+12(r1) /* Save return addr (underflow vect) */ + sync + bl early_sdram_init + sync +#endif /* CONFIG_440EP */ /* * Copy SPL from cache into internal SRAM @@ -429,7 +478,7 @@ spl_loop: start_ram: sync isync -#endif +#endif /* CONFIG_NAND_SPL */ bl 3f b _start @@ -783,7 +832,7 @@ _start: mtdcr ocmdscr2, r3 /* Set Data Side */ mtdcr ocmiscr2, r3 /* Set Instruction Side */ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ - mtdcr ocmdsisdpc,r4 + mtdcr ocmdsisdpc,r3 isync #else /* CONFIG_405EZ */ @@ -810,6 +859,38 @@ _start: #endif /* CONFIG_405EZ */ #endif +#ifdef CONFIG_NAND_SPL + /* + * Copy SPL from cache into internal SRAM + */ + li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 + mtctr r4 + lis r2,CFG_NAND_BOOT_SPL_SRC@h + ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l + lis r3,CFG_NAND_BOOT_SPL_DST@h + ori r3,r3,CFG_NAND_BOOT_SPL_DST@l +spl_loop: + lwzu r4,4(r2) + stwu r4,4(r3) + bdnz spl_loop + + /* + * Jump to code in RAM + */ + bl 00f +00: mflr r10 + lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h + ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l + sub r10,r10,r3 + addi r10,r10,28 + mtlr r10 + blr + +start_ram: + sync + isync +#endif /* CONFIG_NAND_SPL */ + /*----------------------------------------------------------------------- */ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ /*----------------------------------------------------------------------- */ @@ -920,12 +1001,16 @@ _start: stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ +#ifdef CONFIG_NAND_SPL + bl nand_boot /* will not return */ +#else GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ /* NEVER RETURNS! */ bl board_init_f /* run first part of init code (from Flash) */ +#endif /* CONFIG_NAND_SPL */ #endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ @@ -1137,27 +1222,9 @@ crit_return: lwz r1,GPR1(r1) SYNC rfci -#endif /* CONFIG_NAND_SPL */ /* Cache functions. */ -invalidate_icache: - iccci r0,r0 /* for 405, iccci invalidates the */ - blr /* entire I cache */ - -invalidate_dcache: - addi r6,0,0x0000 /* clear GPR 6 */ - /* Do loop for # of dcache congruence classes. */ - lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ - ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l - /* NOTE: dccci invalidates both */ - mtctr r7 /* ways in the D cache */ -..dcloop: - dccci 0,r6 /* invalidate line */ - addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ - bdnz ..dcloop - blr - flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ ori r9,r9,0x8000 @@ -1255,24 +1322,6 @@ wr_tcr: blr /*------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ /*------------------------------------------------------------------------------- */ @@ -1291,15 +1340,6 @@ out16r: blr /*------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out32r */ /* Description: Byte reverse and output 32 bits */ /*------------------------------------------------------------------------------- */ @@ -1327,15 +1367,6 @@ in16r: blr /*------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0x0000(3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: in32r */ /* Description: Input 32 bits and byte reverse */ /*------------------------------------------------------------------------------- */ @@ -1377,9 +1408,6 @@ ppcSync: sync blr -/*------------------------------------------------------------------------------*/ - -#ifndef CONFIG_NAND_SPL /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -1644,8 +1672,105 @@ trap_reloc: stw r0, 4(r7) blr + +#if defined(CONFIG_440) +/*----------------------------------------------------------------------------+ +| dcbz_area. ++----------------------------------------------------------------------------*/ + function_prolog(dcbz_area) + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 + sync + blr + function_epilog(dcbz_area) + +/*----------------------------------------------------------------------------+ +| dflush. Assume 32K at vector address is cachable. ++----------------------------------------------------------------------------*/ + function_prolog(dflush) + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 +..dflush_loop: + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag + sync + mtmsr r9 + blr + function_epilog(dflush) +#endif /* CONFIG_440 */ #endif /* CONFIG_NAND_SPL */ +/*------------------------------------------------------------------------------- */ +/* Function: in8 */ +/* Description: Input 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl in8 +in8: + lbz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out8 */ +/* Description: Output 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl out8 +out8: + stb r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32 */ +/* Description: Output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32 +out32: + stw r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32 */ +/* Description: Input 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl in32 +in32: + lwz 3,0x0000(3) + blr + +invalidate_icache: + iccci r0,r0 /* for 405, iccci invalidates the */ + blr /* entire I cache */ + +invalidate_dcache: + addi r6,0,0x0000 /* clear GPR 6 */ + /* Do loop for # of dcache congruence classes. */ + lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ + ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l + /* NOTE: dccci invalidates both */ + mtctr r7 /* ways in the D cache */ +..dcloop: + dccci 0,r6 /* invalidate line */ + addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..dcloop + blr /**************************************************************************/ /* PPC405EP specific stuff */ @@ -1892,13 +2017,6 @@ pll_wait: #endif /* CONFIG_405EP */ #if defined(CONFIG_440) -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - /*----------------------------------------------------------------------------+ | mttlb3. +----------------------------------------------------------------------------*/ @@ -1946,47 +2064,4 @@ pll_wait: TLBRE(3,3,0) blr function_epilog(mftlb1) - -/*----------------------------------------------------------------------------+ -| dcbz_area. -+----------------------------------------------------------------------------*/ - function_prolog(dcbz_area) - rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 - sync - blr - function_epilog(dcbz_area) - -/*----------------------------------------------------------------------------+ -| dflush. Assume 32K at vector address is cachable. -+----------------------------------------------------------------------------*/ - function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 -..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag - sync - mtmsr r9 - blr - function_epilog(dflush) #endif /* CONFIG_440 */ |