diff options
Diffstat (limited to 'cpu')
59 files changed, 723 insertions, 781 deletions
diff --git a/cpu/arm720t/config.mk b/cpu/arm720t/config.mk index 641b91c..3cae1dc 100644 --- a/cpu/arm720t/config.mk +++ b/cpu/arm720t/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c index b68c5dd..9fd72d3 100644 --- a/cpu/arm920t/at91rm9200/i2c.c +++ b/cpu/arm920t/at91rm9200/i2c.c @@ -189,20 +189,6 @@ i2c_init(int speed, int slaveaddr) return; } -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - unsigned char buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return(buf); -} - -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} - int i2c_set_bus_speed(unsigned int speed) { return -1; diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 66b07da..0913284 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -38,33 +38,7 @@ * turn is based on the boot.bin code from ATMEL * */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUP 0xFFFFFF50 -#define MC_PUER 0xFFFFFF54 -#define MC_ASR 0xFFFFFF04 -#define MC_AASR 0xFFFFFF08 -#define EBI_CFGR 0xFFFFFF64 -#define SMC_CSR0 0xFFFFFF70 - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLBR 0xFFFFFC2C -#define MCKR 0xFFFFFC30 - -#define AT91C_BASE_CKGR 0xFFFFFC20 -#define CKGR_MOR 0 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_BSR 0xFFFFF874 -#define PIOC_PDR 0xFFFFF804 -#define EBI_CSA 0xFFFFFF60 -#define SDRC_CR 0xFFFFFF98 -#define SDRC_MR 0xFFFFFF90 -#define SDRC_TR 0xFFFFFF94 - +#include <asm/arch/AT91RM9200.h> _MTEXT_BASE: #undef START_FROM_MEM @@ -84,7 +58,7 @@ lowlevel_init: #else ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */ #endif - str r0, [r1, #CKGR_MOR] + str r0, [r1, #AT91C_CKGR_MOR] /* Add loop to compensate Main Oscillator startup time */ ldr r0, =0x00000010 LoopOsc: @@ -134,72 +108,72 @@ LoopOsc: .ltorg SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL + .word AT91C_MC_PUIA + .word CONFIG_SYS_MC_PUIA_VAL + .word AT91C_MC_PUP + .word CONFIG_SYS_MC_PUP_VAL + .word AT91C_MC_PUER + .word CONFIG_SYS_MC_PUER_VAL + .word AT91C_MC_ASR + .word CONFIG_SYS_MC_ASR_VAL + .word AT91C_MC_AASR + .word CONFIG_SYS_MC_AASR_VAL + .word AT91C_EBI_CFGR + .word CONFIG_SYS_EBI_CFGR_VAL + .word AT91C_SMC_CSR0 + .word CONFIG_SYS_SMC_CSR0_VAL + .word AT91C_PLLAR + .word CONFIG_SYS_PLLAR_VAL + .word AT91C_PLLBR + .word CONFIG_SYS_PLLBR_VAL + .word AT91C_MCKR + .word CONFIG_SYS_MCKR_VAL /* SMRDATA is 80 bytes long */ /* here there's a delay of 100 */ SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL + .word AT91C_PIOC_ASR + .word CONFIG_SYS_PIOC_ASR_VAL + .word AT91C_PIOC_BSR + .word CONFIG_SYS_PIOC_BSR_VAL + .word AT91C_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL + .word AT91C_EBI_CSA + .word CONFIG_SYS_EBI_CSA_VAL + .word AT91C_SDRC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM1 + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_TR + .word CONFIG_SYS_SDRC_TR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL /* SMRDATA1 is 176 bytes long */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/arm920t/config.mk b/cpu/arm920t/config.mk index 8db4adb..38718a3 100644 --- a/cpu/arm920t/config.mk +++ b/cpu/arm920t/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk index 8db4adb..38718a3 100644 --- a/cpu/arm925t/config.mk +++ b/cpu/arm925t/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index 2f5c337..a15ab16 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -35,7 +35,7 @@ int usb_cpu_init(void) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) /* Enable PLLB */ - at91_sys_write(AT91_CKGR_PLLBR, CFG_AT91_PLLB); + at91_sys_write(AT91_CKGR_PLLBR, CONFIG_SYS_AT91_PLLB); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #endif diff --git a/cpu/arm926ejs/config.mk b/cpu/arm926ejs/config.mk index 84b68ae..a57d03a 100644 --- a/cpu/arm926ejs/config.mk +++ b/cpu/arm926ejs/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv5te # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c index d220a4c..3ba20ef 100644 --- a/cpu/arm926ejs/davinci/i2c.c +++ b/cpu/arm926ejs/davinci/i2c.c @@ -331,21 +331,4 @@ int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) return(0); } - -u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg) -{ - u_int8_t tmp; - - i2c_read(chip, reg, 1, &tmp, 1); - return(tmp); -} - - -void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val) -{ - u_int8_t tmp; - - i2c_write(chip, reg, 1, &tmp, 1); -} - #endif /* CONFIG_DRIVER_DAVINCI_I2C */ diff --git a/cpu/arm946es/config.mk b/cpu/arm946es/config.mk index f774c7e..6190e16 100644 --- a/cpu/arm946es/config.mk +++ b/cpu/arm946es/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm_intcm/config.mk b/cpu/arm_intcm/config.mk index f774c7e..6190e16 100644 --- a/cpu/arm_intcm/config.mk +++ b/cpu/arm_intcm/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ========================================================================= PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/blackfin/i2c.c b/cpu/blackfin/i2c.c index 60f03d4..2a3e223 100644 --- a/cpu/blackfin/i2c.c +++ b/cpu/blackfin/i2c.c @@ -425,20 +425,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) } -uchar i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg); - i2c_read(chip, reg, 0, &buf, 1); - return (buf); -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip, - reg, val); - i2c_write(chip, reg, 0, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile index 50534b6..f20675a 100644 --- a/cpu/i386/Makefile +++ b/cpu/i386/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o start16.o reset.o +START = start.o start16.o resetvec.o COBJS = serial.o interrupts.o cpu.o timer.o sc520.o SOBJS = sc520_asm.o diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c index 5fd37c7..b9af5f8 100644 --- a/cpu/i386/cpu.c +++ b/cpu/i386/cpu.c @@ -35,6 +35,7 @@ #include <common.h> #include <command.h> +#include <asm/interrupt.h> int cpu_init(void) { @@ -64,3 +65,19 @@ void flush_cache (unsigned long dummy1, unsigned long dummy2) asm("wbinvd\n"); return; } + +void __attribute__ ((regparm(0))) generate_gpf(void); + +/* segment 0x70 is an arbitrary segment which does not exist */ +asm(".globl generate_gpf\n" + "generate_gpf:\n" + "ljmp $0x70, $0x47114711\n"); + +void __reset_cpu(ulong addr) +{ + printf("Resetting using i386 Triple Fault\n"); + set_vector(13, generate_gpf); /* general protection fault handler */ + set_vector(8, generate_gpf); /* double fault handler */ + generate_gpf(); /* start the show */ +} +void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu"))); diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c index f6dbcca..badb30b 100644 --- a/cpu/i386/interrupts.c +++ b/cpu/i386/interrupts.c @@ -26,6 +26,7 @@ #include <asm/io.h> #include <asm/i8259.h> #include <asm/ibmpc.h> +#include <asm/interrupt.h> struct idt_entry { @@ -376,7 +377,7 @@ asm ("idt_ptr:\n" ".long idt\n" /* offset */ ".word 0x18\n");/* data segment */ -static void set_vector(int intnum, void *routine) +void set_vector(int intnum, void *routine) { idt[intnum].base_high = (u16)((u32)(routine)>>16); idt[intnum].base_low = (u16)((u32)(routine)&0xffff); @@ -507,19 +508,3 @@ int disable_interrupts(void) return (flags&0x200); /* IE flags is bit 9 */ } - - -#ifdef CONFIG_SYS_RESET_GENERIC - -void __attribute__ ((regparm(0))) generate_gpf(void); -asm(".globl generate_gpf\n" - "generate_gpf:\n" - "ljmp $0x70, $0x47114711\n"); /* segment 0x70 is an arbitrary segment which does not - * exist */ -void reset_cpu(ulong addr) -{ - set_vector(13, generate_gpf); /* general protection fault handler */ - set_vector(8, generate_gpf); /* double fault handler */ - generate_gpf(); /* start the show */ -} -#endif diff --git a/cpu/i386/reset.S b/cpu/i386/resetvec.S index 07a7384..d9222dd 100644 --- a/cpu/i386/reset.S +++ b/cpu/i386/resetvec.S @@ -26,7 +26,7 @@ .extern start16 -.section .reset, "ax" +.section .resetvec, "ax" .code16 reset_vector: cli diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c index cb6bc03..12e8f38 100644 --- a/cpu/i386/sc520.c +++ b/cpu/i386/sc520.c @@ -25,9 +25,6 @@ * but idependent of implementation */ #include <config.h> - -#ifdef CONFIG_SC520 - #include <common.h> #include <config.h> #include <pci.h> @@ -507,4 +504,13 @@ u8 ssi_rx_byte(void) return read_mmcr_byte(SC520_SSIRCV); } -#endif /* CONFIG_SC520 */ +#ifdef CONFIG_SYS_RESET_SC520 +void reset_cpu(ulong addr) +{ + printf("Resetting using SC520 MMCR\n"); + /* Write a '1' to the SYS_RST of the RESCFG MMCR */ + write_mmcr_word(SC520_RESCFG, 0x0001); + + /* NOTREACHED */ +} +#endif diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk index 10e755b..32fd1d1 100644 --- a/cpu/lh7a40x/config.mk +++ b/cpu/lh7a40x/config.mk @@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4 # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 18308c8..66f9164 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -131,7 +131,7 @@ void cpu_init_f(void) mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */ /* FlexBus Chipselect */ init_fbcs(); diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c index 4b7866f..3b7c4d4 100644 --- a/cpu/microblaze/cache.c +++ b/cpu/microblaze/cache.c @@ -25,8 +25,6 @@ #include <common.h> #include <asm/asm.h> -#if defined(CONFIG_CMD_CACHE) - int dcache_status (void) { int i = 0; @@ -62,4 +60,3 @@ void dcache_enable (void) { void dcache_disable(void) { MSRCLR(0x80); } -#endif diff --git a/cpu/mips/start.S b/cpu/mips/start.S index 6a22302..57db589 100644 --- a/cpu/mips/start.S +++ b/cpu/mips/start.S @@ -243,9 +243,11 @@ reset: mtc0 zero, CP0_COUNT mtc0 zero, CP0_COMPARE +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) /* CONFIG0 register */ li t0, CONF_CM_UNCACHED mtc0 t0, CP0_CONFIG +#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ /* Initialize $gp. */ @@ -255,6 +257,7 @@ reset: 1: lw gp, 0(ra) +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) /* Initialize any external memory. */ la t9, lowlevel_init @@ -271,6 +274,7 @@ reset: */ li t0, CONF_CM_CACHABLE_NONCOHERENT mtc0 t0, CP0_CONFIG +#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ /* Set up temporary stack. */ @@ -307,6 +311,7 @@ relocate_code: la t3, in_ram lw t2, -12(t3) /* t2 <-- uboot_end_data */ move t1, a2 + move s2, a2 /* s2 <-- destination address */ /* * Fix $gp: @@ -316,13 +321,21 @@ relocate_code: move t6, gp sub gp, CONFIG_SYS_MONITOR_BASE add gp, a2 /* gp now adjusted */ - sub t6, gp, t6 /* t6 <-- relocation offset */ + sub s1, gp, t6 /* s1 <-- relocation offset */ /* * t0 = source address * t1 = target address * t2 = source end address */ + + /* + * Save destination address and size for later usage in flush_cache() + */ + move s0, a1 /* save gd in s0 */ + move a0, t1 /* a0 <-- destination addr */ + sub a1, t2, t0 /* a1 <-- size */ + /* On the purple board we copy the code earlier in a special way * in order to solve flash problems */ @@ -338,9 +351,14 @@ relocate_code: /* If caches were enabled, we would have to flush them here. */ + /* a0 & a1 are already set up for flush_cache(start, size) */ + la t9, flush_cache + jalr t9 + nop + /* Jump to where we've relocated ourselves. */ - addi t0, a2, in_ram - _start + addi t0, s2, in_ram - _start jr t0 nop @@ -367,7 +385,7 @@ in_ram: 1: lw t1, 0(t4) beqz t1, 2f - add t1, t6 + add t1, s1 sw t1, 0(t4) 2: addi t2, 1 @@ -378,8 +396,8 @@ in_ram: */ lw t1, -12(t0) /* t1 <-- uboot_end_data */ lw t2, -8(t0) /* t2 <-- uboot_end */ - add t1, t6 /* adjust pointers */ - add t2, t6 + add t1, s1 /* adjust pointers */ + add t2, s1 sub t1, 4 1: @@ -387,10 +405,10 @@ in_ram: bltl t1, t2, 1b sw zero, 0(t1) /* delay slot */ - move a0, a1 + move a0, s0 /* a0 <-- gd */ la t9, board_init_r jr t9 - move a1, a2 /* delay slot */ + move a1, s2 /* delay slot */ .end relocate_code diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c index 77a6f0d..4f6bc86 100644 --- a/cpu/mpc512x/i2c.c +++ b/cpu/mpc512x/i2c.c @@ -382,23 +382,6 @@ Done: return ret; } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - i2c_read (chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write (uchar chip, uchar reg, uchar val) -{ - i2c_write (chip, reg, 1, &val, 1); - - return; -} - - int i2c_set_bus_num (unsigned int bus) { if (bus >= I2C_BUS_CNT) { diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c index 4d16bbe..7d76274 100644 --- a/cpu/mpc5xxx/i2c.c +++ b/cpu/mpc5xxx/i2c.c @@ -380,20 +380,4 @@ Done: return ret; } -uchar i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - i2c_read(chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - i2c_write(chip, reg, 1, &val, 1); - - return; -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c index d67936d..76ecdf1 100644 --- a/cpu/mpc8220/i2c.c +++ b/cpu/mpc8220/i2c.c @@ -387,20 +387,4 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len) return ret; } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - i2c_read (chip, reg, 1, &buf, 1); - - return buf; -} - -void i2c_reg_write (uchar chip, uchar reg, uchar val) -{ - i2c_write (chip, reg, 1, &val, 1); - - return; -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile index f249dd7..a57ad12 100644 --- a/cpu/mpc824x/Makefile +++ b/cpu/mpc824x/Makefile @@ -44,7 +44,7 @@ $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)bedbug_603e.c: - ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c + ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c ######################################################################### diff --git a/cpu/mpc824x/drivers/i2c/i2c.c b/cpu/mpc824x/drivers/i2c/i2c.c index 854345e..637ae4c 100644 --- a/cpu/mpc824x/drivers/i2c/i2c.c +++ b/cpu/mpc824x/drivers/i2c/i2c.c @@ -267,18 +267,4 @@ int i2c_probe (uchar chip) return i2c_read (chip, 0, 1, (uchar *) &tmp, 1); } -uchar i2c_reg_read (uchar i2c_addr, uchar reg) -{ - uchar buf[1]; - - i2c_read (i2c_addr, reg, 1, buf, 1); - - return (buf[0]); -} - -void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write (i2c_addr, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c index c124639..35cf8f1 100644 --- a/cpu/mpc8260/i2c.c +++ b/cpu/mpc8260/i2c.c @@ -753,22 +753,6 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -uchar -i2c_reg_read(uchar chip, uchar reg) -{ - uchar buf; - - i2c_read(chip, reg, 1, &buf, 1); - - return (buf); -} - -void -i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - i2c_write(chip, reg, 1, &val, 1); -} - #if defined(CONFIG_I2C_MULTI_BUS) /* * Functions for multiple I2C bus handling diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index fcb6a52..dd35e6b 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -39,6 +39,7 @@ COBJS-y += ecc.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_FSL_SERDES) += serdes.o COBJS-$(CONFIG_83XX_GENERIC_PCI) += pci.o +COBJS-$(CONFIG_83XX_GENERIC_PCIE) += pcie.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS := $(COBJS-y) diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c index ab0760b..e9965d7 100644 --- a/cpu/mpc83xx/pci.c +++ b/cpu/mpc83xx/pci.c @@ -118,10 +118,12 @@ static void pci_init_bus(int bus, struct pci_region *reg) #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif +#ifndef CONFIG_PCISLAVE /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); +#endif } /* @@ -190,6 +192,9 @@ void mpc83xx_pcislave_unlock(int bus) pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16); reg16 &= ~(PCI_FUNCTION_CFG_LOCK); pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16); + + /* The configuration bit is now unlocked, so we can scan the bus */ + hose->last_busno = pci_hose_scan(hose); } #endif diff --git a/cpu/mpc83xx/pcie.c b/cpu/mpc83xx/pcie.c new file mode 100644 index 0000000..02150ba --- /dev/null +++ b/cpu/mpc83xx/pcie.c @@ -0,0 +1,314 @@ +/* + * Copyright (C) 2007-2009 Freescale Semiconductor, Inc. + * Copyright (C) 2008-2009 MontaVista Software, Inc. + * + * Authors: Tony Li <tony.li@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <mpc83xx.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define PCIE_MAX_BUSES 2 + +#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES + +static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev) +{ + int bus = PCI_BUS(dev) - hose->first_busno; + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + pex83xx_t *pex = &immr->pciexp[bus]; + struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0]; + u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev); + u32 dev_base = bus << 24 | devfn << 16; + + if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK) + return -1; + /* + * Workaround for the HW bug: for Type 0 configure transactions the + * PCI-E controller does not check the device number bits and just + * assumes that the device number bits are 0. + */ + if (devfn & 0xf8) + return -1; + + out_le32(&out_win->tarl, dev_base); + return 0; +} + +#define cfg_read(val, addr, type, op) \ + do { *val = op((type)(addr)); } while (0) +#define cfg_write(val, addr, type, op) \ + do { op((type *)(addr), (val)); } while (0) + +#define PCIE_OP(rw, size, type, op) \ +static int pcie_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, \ + type val) \ +{ \ + int ret; \ + \ + ret = mpc83xx_pcie_remap_cfg(hose, dev); \ + if (ret) \ + return ret; \ + cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \ + return 0; \ +} + +PCIE_OP(read, byte, u8 *, in_8) +PCIE_OP(read, word, u16 *, in_le16) +PCIE_OP(read, dword, u32 *, in_le32) +PCIE_OP(write, byte, u8, out_8) +PCIE_OP(write, word, u16, out_le16) +PCIE_OP(write, dword, u32, out_le32) + +static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, + u8 link) +{ + extern void disable_addr_trans(void); /* start.S */ + static struct pci_controller pcie_hose[PCIE_MAX_BUSES]; + static int max_bus; + struct pci_controller *hose = &pcie_hose[bus]; + int i; + + /* + * There are no spare BATs to remap all PCI-E windows for U-Boot, so + * disable translations. In general, this is not great solution, and + * that's why we don't register PCI-E hoses by default. + */ + disable_addr_trans(); + + for (i = 0; i < 2; i++, reg++) { + if (reg->size == 0) + break; + + hose->regions[i] = *reg; + hose->region_count++; + } + + i = hose->region_count++; + hose->regions[i].bus_start = 0; + hose->regions[i].phys_start = 0; + hose->regions[i].size = gd->ram_size; + hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY; + + i = hose->region_count++; + hose->regions[i].bus_start = CONFIG_SYS_IMMR; + hose->regions[i].phys_start = CONFIG_SYS_IMMR; + hose->regions[i].size = 0x100000; + hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY; + + hose->first_busno = max_bus; + hose->last_busno = 0xff; + + if (bus == 0) + hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE; + else + hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE; + + pci_set_ops(hose, + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); + + if (!link) + hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK; + + pci_register_hose(hose); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + max_bus = hose->last_busno + 1; +} + +#else + +static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, + u8 link) {} + +#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */ + +static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + pex83xx_t *pex = &immr->pciexp[bus]; + struct pex_outbound_window *out_win; + struct pex_inbound_window *in_win; + void *hose_cfg_base; + unsigned int ram_sz; + unsigned int barl; + unsigned int tar; + u16 reg16; + int i; + + /* Enable pex csb bridge inbound & outbound transactions */ + out_le32(&pex->bridge.pex_csb_ctrl, + in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE | + PEX_CSB_CTRL_IBPIOE); + + /* Enable bridge outbound */ + out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE | + PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE | + PEX_CSB_OBCTRL_CFGWE); + + out_win = &pex->bridge.pex_outbound_win[0]; + if (bus) { + out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG | + CONFIG_SYS_PCIE2_CFG_SIZE); + out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE); + } else { + out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG | + CONFIG_SYS_PCIE1_CFG_SIZE); + out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE); + } + out_le32(&out_win->tarl, 0); + out_le32(&out_win->tarh, 0); + + for (i = 0; i < 2; i++, reg++) { + u32 ar; + + if (reg->size == 0) + break; + + out_win = &pex->bridge.pex_outbound_win[i + 1]; + out_le32(&out_win->bar, reg->phys_start); + out_le32(&out_win->tarl, reg->bus_start); + out_le32(&out_win->tarh, 0); + ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE); + if (reg->flags & PCI_REGION_IO) + ar |= PEX_OWAR_TYPE_IO; + else + ar |= PEX_OWAR_TYPE_MEM; + out_le32(&out_win->ar, ar); + } + + out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE); + + ram_sz = gd->ram_size; + barl = 0; + tar = 0; + i = 0; + while (ram_sz > 0) { + in_win = &pex->bridge.pex_inbound_win[i]; + out_le32(&in_win->barl, barl); + out_le32(&in_win->barh, 0x0); + out_le32(&in_win->tar, tar); + if (ram_sz >= 0x10000000) { + /* The maxium windows size is 256M */ + out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV | + PEX_IWAR_TYPE_PF | 0x0FFFF000); + barl += 0x10000000; + tar += 0x10000000; + ram_sz -= 0x10000000; + } else { + /* The UM is not clear here. + * So, round up to even Mb boundary */ + + ram_sz = ram_sz >> (20 + + ((ram_sz & 0xFFFFF) ? 1 : 0)); + if (!(ram_sz % 2)) + ram_sz -= 1; + out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV | + PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000); + ram_sz = 0; + } + i++; + } + + in_win = &pex->bridge.pex_inbound_win[i]; + out_le32(&in_win->barl, CONFIG_SYS_IMMR); + out_le32(&in_win->barh, 0); + out_le32(&in_win->tar, CONFIG_SYS_IMMR); + out_le32(&in_win->ar, PEX_IWAR_EN | + PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M); + + /* Enable the host virtual INTX interrupts */ + out_le32(&pex->bridge.pex_int_axi_misc_enb, + in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0); + + /* Hose configure header is memory-mapped */ + hose_cfg_base = (void *)pex; + + get_clocks(); + /* Configure the PCIE controller core clock ratio */ + out_le32(hose_cfg_base + PEX_GCLK_RATIO, + (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16) + / 333); + udelay(1000000); + + /* Do Type 1 bridge configuration */ + out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0); + out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1); + out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255); + + /* + * Write to Command register + */ + reg16 = in_le16(hose_cfg_base + PCI_COMMAND); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO | + PCI_COMMAND_SERR | PCI_COMMAND_PARITY; + out_le16(hose_cfg_base + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + out_le16(hose_cfg_base + PCI_STATUS, 0xffff); + out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80); + out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08); + + printf("PCIE%d: ", bus); + + reg16 = in_le16(hose_cfg_base + PCI_LTSSM); + if (reg16 >= PCI_LTSSM_L0) + printf("link\n"); + else + printf("No link\n"); + + mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0); +} + +/* + * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs + * must have been set to cover all of the requested regions. + */ +void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot) +{ + int i; + + /* + * Release PCI RST Output signal. + * Power on to RST high must be at least 100 ms as per PCI spec. + * On warm boots only 1 ms is required. + */ + udelay(warmboot ? 1000 : 100000); + + for (i = 0; i < num_buses; i++) + mpc83xx_pcie_init_bus(i, reg[i]); +} diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index bf9bf36..4230099 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -132,7 +132,7 @@ int get_clocks(void) u32 qe_clk; u32 brg_clk; #endif -#if defined(CONFIG_MPC837X) +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X) u32 pciexp1_clk; u32 pciexp2_clk; #endif @@ -328,7 +328,7 @@ int get_clocks(void) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ #endif -#if defined(CONFIG_MPC837X) +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X) switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) { case 0: pciexp1_clk = 0; diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 792b2c8..26e3106 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -109,6 +109,45 @@ version_string: .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")" .ascii " ", CONFIG_IDENT_STRING, "\0" + .align 2 + + .globl enable_addr_trans +enable_addr_trans: + /* enable address translation */ + mfmsr r5 + ori r5, r5, (MSR_IR | MSR_DR) + mtmsr r5 + isync + blr + + .globl disable_addr_trans +disable_addr_trans: + /* disable address translation */ + mflr r4 + mfmsr r3 + andi. r0, r3, (MSR_IR | MSR_DR) + beqlr + andc r3, r3, r0 + mtspr SRR0, r4 + mtspr SRR1, r3 + rfi + + .globl get_pvr +get_pvr: + mfspr r3, PVR + blr + + .globl ppcDWstore +ppcDWstore: + lfd 1, 0(r4) + stfd 1, 0(r3) + blr + + .globl ppcDWload +ppcDWload: + lfd 1, 0(r3) + stfd 1, 0(r4) + blr #ifndef CONFIG_DEFAULT_IMMR #error CONFIG_DEFAULT_IMMR must be defined @@ -161,9 +200,23 @@ boot_cold: /* time t 3 */ nop boot_warm: /* time t 5 */ mfmsr r5 /* save msr contents */ + + /* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */ + bl 1f +1: mflr r7 + lis r3, CONFIG_SYS_IMMR@h ori r3, r3, CONFIG_SYS_IMMR@l + + lwz r6, IMMRBAR(r4) + isync + stw r3, IMMRBAR(r4) + lwz r6, 0(r7) /* Arbitrary external load */ + isync + + lwz r6, IMMRBAR(r3) + isync /* Initialise the E300 processor core */ /*------------------------------------------*/ @@ -173,9 +226,7 @@ boot_warm: /* time t 5 */ * is loaded. Wait for the rest before branching * to another flash page. */ - addi r7, r3, 0x50b0 -1: dcbi 0, r7 - lwz r6, 0(r7) +1: lwz r6, 0x50b0(r3) andi. r6, r6, 1 beq 1b #endif @@ -698,27 +749,6 @@ setup_bats: blr - .globl enable_addr_trans -enable_addr_trans: - /* enable address translation */ - mfmsr r5 - ori r5, r5, (MSR_IR | MSR_DR) - mtmsr r5 - isync - blr - - .globl disable_addr_trans -disable_addr_trans: - /* disable address translation */ - mflr r4 - mfmsr r3 - andi. r0, r3, (MSR_IR | MSR_DR) - beqlr - andc r3, r3, r0 - mtspr SRR0, r4 - mtspr SRR1, r3 - rfi - /* Cache functions. * * Note: requires that all cache bits in @@ -796,23 +826,6 @@ flush_dcache: b 1b 2: blr - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - - .globl ppcDWstore -ppcDWstore: - lfd 1, 0(r4) - stfd 1, 0(r3) - blr - - .globl ppcDWload -ppcDWload: - lfd 1, 0(r3) - stfd 1, 0(r4) - blr - /*-------------------------------------------------------------------*/ /* diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 943602f..a34e251 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver) int checkcpu (void) { sys_info_t sysinfo; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ uint pvr, svr; uint fam; uint ver; @@ -92,6 +90,7 @@ int checkcpu (void) #else u32 ddr_ratio = 0; #endif + int i; svr = get_svr(); ver = SVR_SOC_VER(svr); @@ -143,8 +142,10 @@ int checkcpu (void) get_sys_info(&sysinfo); - puts("Clock Configuration:\n"); - printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor)); + puts("Clock Configuration:\n "); + for (i = 0; i < CONFIG_NUM_CPUS; i++) + printf("CPU%d:%-4s MHz, ", + i,strmhz(buf1, sysinfo.freqProcessor[i])); printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); switch (ddr_ratio) { @@ -165,30 +166,11 @@ int checkcpu (void) break; } -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \ - defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536) - /* - * Yes, the entire PQ38 family use the same - * bit-representation for twice the clock divider values. - */ - clkdiv *= 2; -#endif - printf("LBC:%-4s MHz\n", - strmhz(buf1, sysinfo.freqSystemBus / clkdiv)); - } else { - printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr); - } + if (sysinfo.freqLocalBus > LCRR_CLKDIV) + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + else + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 59aafb1..1fae47c 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -28,11 +28,12 @@ #include <fdt_support.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + extern void ft_qe_setup(void *blob); #ifdef CONFIG_MP #include "mp.h" -DECLARE_GLOBAL_DATA_PTR; void ft_fixup_cpu(void *blob, u64 memory_limit) { @@ -212,6 +213,10 @@ void fdt_add_enet_stashing(void *fdt) void ft_cpu_setup(void *blob, bd_t *bd) { + int off; + int val; + sys_info_t sysinfo; + /* delete crypto node if not on an E-processor */ if (!IS_E_PROCESSOR(get_svr())) fdt_fixup_crypto_node(blob, 0); @@ -227,10 +232,22 @@ void ft_cpu_setup(void *blob, bd_t *bd) "timebase-frequency", bd->bi_busfreq / 8, 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); + get_sys_info(&sysinfo); + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); + val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); + fdt_setprop(blob, off, "clock-frequency", &val, 4); + off = fdt_node_offset_by_prop_value(blob, off, "device_type", + "cpu", 4); + } do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); + + do_fixup_by_compat_u32(blob, "fsl,pq3-localbus", + "bus-frequency", gd->lbc_clk, 1); + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); #ifdef CONFIG_QE ft_qe_setup(blob); #endif diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 787c6eb..fedf1a5 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -31,6 +31,22 @@ #if defined(CONFIG_PCI) && !defined(CONFIG_FSL_PCI_INIT) +#ifndef CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE +#endif + +#ifndef CONFIG_SYS_PCI1_IO_BUS +#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE +#endif + +#ifndef CONFIG_SYS_PCI2_MEM_BUS +#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE +#endif + +#ifndef CONFIG_SYS_PCI2_IO_BUS +#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE +#endif + static struct pci_controller *pci_hose; void @@ -80,14 +96,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose) pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16); } - pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & 0x000fffff; + pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff; pcix->potear1 = 0x00000000; pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff; pcix->powbear1 = 0x00000000; pcix->powar1 = (POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1)); - pcix->potar2 = (CONFIG_SYS_PCI1_IO_BASE >> 12) & 0x000fffff; + pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff; pcix->potear2 = 0x00000000; pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff; pcix->powbear2 = 0x00000000; @@ -105,13 +121,13 @@ pci_mpc85xx_init(struct pci_controller *board_hose) pcix->piwar3 = 0; pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI1_MEM_BASE, + CONFIG_SYS_PCI1_MEM_BUS, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 1, - CONFIG_SYS_PCI1_IO_BASE, + CONFIG_SYS_PCI1_IO_BUS, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); @@ -165,14 +181,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose) */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & 0x000fffff; + pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff; pcix2->potear1 = 0x00000000; pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff; pcix2->powbear1 = 0x00000000; pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1)); - pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BASE >> 12) & 0x000fffff; + pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff; pcix2->potear2 = 0x00000000; pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff; pcix2->powbear2 = 0x00000000; @@ -190,13 +206,13 @@ pci_mpc85xx_init(struct pci_controller *board_hose) pcix2->piwar3 = 0; pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI2_MEM_BASE, + CONFIG_SYS_PCI2_MEM_BUS, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 1, - CONFIG_SYS_PCI2_IO_BASE, + CONFIG_SYS_PCI2_IO_BUS, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 7c3e8a1..54c936c 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -157,6 +157,7 @@ __secondary_start_page: mfspr r0,SPRN_PIR stw r0,ENTRY_PIR(r10) + mtspr IVPR,r12 /* * Coming here, we know the cpu has one TLB mapping in TLB1[0] * which maps 0xfffff000-0xffffffff one-to-one. We set up a diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 1e0f483..b0f47e0 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include <common.h> #include <ppc_asm.tmpl> #include <asm/processor.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -37,17 +38,20 @@ void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; + uint lcrr_div; + int i; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; - e500_ratio = (gur->porpllsr) & 0x003f0000; - e500_ratio >>= 16; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ half_freqSystemBus = sysInfo->freqSystemBus/2; - sysInfo->freqProcessor = e500_ratio*half_freqSystemBus; + for (i = 0; i < CONFIG_NUM_CPUS; i++) { + e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; + sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; + } /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ sysInfo->freqDDRBus = sysInfo->freqSystemBus; @@ -60,6 +64,30 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { +#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ + !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) + /* + * Yes, the entire PQ38 family use the same + * bit-representation for twice the clock divider values. + */ + lcrr_div *= 2; +#endif + sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -79,9 +107,10 @@ int get_clocks (void) dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); - gd->cpu_clk = sys_info.freqProcessor; + gd->cpu_clk = sys_info.freqProcessor[0]; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 8fa0ff7..80f9677 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -184,19 +184,19 @@ _start_e500: mtspr DBCR0,r0 #endif - /* create a temp mapping in AS=1 to the boot window */ + /* create a temp mapping in AS=1 to the 4M boot window */ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l - /* Align the mapping to 16MB */ - lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ + lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index a2d16ae..25fa9ee 100644 --- a/cpu/mpc85xx/tlb.c +++ b/cpu/mpc85xx/tlb.c @@ -26,6 +26,11 @@ #include <common.h> #include <asm/processor.h> #include <asm/mmu.h> +#ifdef CONFIG_ADDR_MAP +#include <addr_map.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; void set_tlb(u8 tlb, u32 epn, u64 rpn, u8 perms, u8 wimge, @@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) + addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); +#endif } void disable_tlb(u8 esel) @@ -67,6 +77,11 @@ void disable_tlb(u8 esel) mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if (gd->flags & GD_FLG_RELOC) + addrmap_set_entry(0, 0, 0, esel); +#endif } void invalidate_tlb(u8 tlb) @@ -91,6 +106,29 @@ void init_tlbs(void) return ; } +#ifdef CONFIG_ADDR_MAP +void init_addr_map(void) +{ + int i; + + for (i = 0; i < num_tlb_entries; i++) { + if (tlb_table[i].tlb == 0) + continue; + + addrmap_set_entry(tlb_table[i].epn, + tlb_table[i].rpn, + (1UL << ((tlb_table[i].tsize * 2) + 10)), + tlb_table[i].esel); + } + + return ; +} +#endif + +#ifndef CONFIG_SYS_DDR_TLB_START +#define CONFIG_SYS_DDR_TLB_START 8 +#endif + unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) { unsigned int tlb_size; @@ -137,7 +175,7 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) * Configure DDR TLB1 entries. * Starting at TLB1 8, use no more than 8 TLB1 entries. */ - ram_tlb_index = 8; + ram_tlb_index = CONFIG_SYS_DDR_TLB_START; ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; while (ram_tlb_address < (memsize_in_meg * 1024 * 1024) && ram_tlb_index < 16) { diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 4cace98..dc53bee 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -39,8 +39,6 @@ checkcpu(void) uint pvr, svr; uint ver; uint major, minor; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -100,22 +98,11 @@ checkcpu(void) printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { - printf("LBC:%4lu MHz\n", - sysinfo.freqSystemBus / 1000000 / clkdiv); + if (sysinfo.freqLocalBus > LCRR_CLKDIV) { + printf("LBC:%4lu MHz\n", sysinfo.freqLocalBus / 1000000); } else { - printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); } puts(" L2: "); diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 3adfad9..383b06b 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -29,6 +29,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); +#if defined(CONFIG_MPC8641) + do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus", + "bus-frequency", gd->lbc_clk, 1); +#endif + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \ diff --git a/cpu/mpc86xx/release.S b/cpu/mpc86xx/release.S index b524e50..95efbb4 100644 --- a/cpu/mpc86xx/release.S +++ b/cpu/mpc86xx/release.S @@ -125,7 +125,7 @@ invl2: mtspr HID0, r5 /* enable + invalidate */ mtspr HID0, r3 /* enable */ sync -#ifdef CFG_L2 +#ifdef CONFIG_SYS_L2 sync lis r3, L2_ENABLE@h ori r3, r3, L2_ENABLE@l diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 415ac9d..64a3479 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -28,6 +28,7 @@ #include <common.h> #include <mpc86xx.h> #include <asm/processor.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,6 +40,7 @@ void get_sys_info(sys_info_t *sysInfo) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; uint plat_ratio, e600_ratio; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -90,6 +92,22 @@ void get_sys_info(sys_info_t *sysInfo) sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; break; } + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { + sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -105,6 +123,7 @@ int get_clocks(void) get_sys_info(&sys_info); gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 6645cb8..63cc8db 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -982,5 +982,3 @@ unlock_ram_in_cache: blr #endif #endif - - diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c index 29c7c71..338caba 100644 --- a/cpu/mpc8xx/i2c.c +++ b/cpu/mpc8xx/i2c.c @@ -42,19 +42,6 @@ DECLARE_GLOBAL_DATA_PTR; /* define to enable debug messages */ #undef DEBUG_I2C -/*----------------------------------------------------------------------- - * Set default values - */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - -#ifndef CONFIG_SYS_I2C_SLAVE -#define CONFIG_SYS_I2C_SLAVE 0xFE -#endif -/*----------------------------------------------------------------------- - */ - /* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */ #define TOUT_LOOP 1000000 @@ -717,24 +704,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -uchar -i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return (buf); -} - -void -i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - i2c_write(i2c_addr, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c index 1783e92..292980d 100644 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -167,7 +167,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) | ((trrt_mclk & 0x3) << 26) /* RRT */ | ((twwt_mclk & 0x3) << 24) /* WWT */ | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */ - | ((pre_pd_exit_mclk & 0x7) << 16) /* PRE_PD_EXIT */ + | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */ | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */ | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */ ); @@ -185,10 +185,14 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */ unsigned int cntl_adj = 0; /* Control Adjust */ + /* If the tRAS > 19 MCLK, we use the ext mode */ + if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13) + ext_acttopre = 1; + ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4; ddr->timing_cfg_3 = (0 | ((ext_acttopre & 0x1) << 24) - | ((ext_refrec & 0x7) << 16) + | ((ext_refrec & 0xF) << 16) | ((ext_caslat & 0x1) << 12) | ((cntl_adj & 0x7) << 0) ); @@ -251,12 +255,12 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps); ddr->timing_cfg_1 = (0 - | ((pretoact_mclk & 0x07) << 28) + | ((pretoact_mclk & 0x0F) << 28) | ((acttopre_mclk & 0x0F) << 24) - | ((acttorw_mclk & 0x7) << 20) + | ((acttorw_mclk & 0xF) << 20) | ((caslat_ctrl & 0xF) << 16) | ((refrec_ctrl & 0xF) << 12) - | ((wrrec_mclk & 0x07) << 8) + | ((wrrec_mclk & 0x0F) << 8) | ((acttoact_mclk & 0x07) << 4) | ((wrtord_mclk & 0x07) << 0) ); @@ -309,13 +313,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps); ddr->timing_cfg_2 = (0 - | ((add_lat_mclk & 0x7) << 28) + | ((add_lat_mclk & 0xf) << 28) | ((cpo & 0x1f) << 23) - | ((wr_lat & 0x7) << 19) + | ((wr_lat & 0xf) << 19) | ((rd_to_pre & 0x7) << 13) | ((wr_data_delay & 0x7) << 10) | ((cke_pls & 0x7) << 6) - | ((four_act & 0x1f) << 0) + | ((four_act & 0x3f) << 0) ); debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2); } @@ -332,7 +336,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, unsigned int sdram_type; /* Type of SDRAM */ unsigned int dyn_pwr; /* Dynamic power management mode */ unsigned int dbw; /* DRAM dta bus width */ - unsigned int eight_be; /* 8-beat burst enable */ + unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */ unsigned int ncap = 0; /* Non-concurrent auto-precharge */ unsigned int threeT_en; /* Enable 3T timing */ unsigned int twoT_en; /* Enable 2T timing */ @@ -359,7 +363,9 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, dyn_pwr = popts->dynamic_power; dbw = popts->data_bus_width; - eight_be = 0; /* always 0 for DDR2 */ + /* DDR3 must use 8-beat bursts when using 32-bit bus mode */ + if ((sdram_type == SDRAM_TYPE_DDR3) && (dbw == 0x1)) + eight_be = 1; threeT_en = popts->threeT_en; twoT_en = popts->twoT_en; ba_intlv_ctl = popts->ba_intlv_ctl; @@ -691,10 +697,10 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr) unsigned int wodt_off = 0; /* Write to ODT off */ ddr->timing_cfg_5 = (0 - | ((rodt_on & 0xf) << 24) - | ((rodt_off & 0xf) << 20) - | ((wodt_on & 0xf) << 12) - | ((wodt_off & 0xf) << 8) + | ((rodt_on & 0x1f) << 24) + | ((rodt_off & 0x7) << 20) + | ((wodt_on & 0x1f) << 12) + | ((wodt_off & 0x7) << 8) ); debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5); } @@ -744,15 +750,14 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr) | ((wrlvl_dqsen & 0x7) << 16) | ((wrlvl_smpl & 0xf) << 12) | ((wrlvl_wlr & 0x7) << 8) - | ((wrlvl_start & 0xF) << 0) + | ((wrlvl_start & 0x1F) << 0) ); } /* DDR Self Refresh Counter (DDR_SR_CNTR) */ -static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr) +static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it) { - unsigned int sr_it = 0; /* Self Refresh Idle Threshold */ - + /* Self Refresh Idle Threshold */ ddr->ddr_sr_cntr = (sr_it & 0xF) << 16; } @@ -855,6 +860,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, unsigned int i; unsigned int cas_latency; unsigned int additive_latency; + unsigned int sr_it; memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t)); @@ -876,6 +882,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, ? popts->additive_latency_override_value : common_dimm->additive_latency; + sr_it = (popts->auto_self_refresh_en) + ? popts->sr_it + : 0; + /* Chip Select Memory Bounds (CSn_BNDS) */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { phys_size_t sa = 0; @@ -1036,7 +1046,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_wrlvl_cntl(ddr); set_ddr_pd_cntl(ddr); - set_ddr_sr_cntr(ddr); + set_ddr_sr_cntr(ddr, sr_it); set_ddr_sdram_rcw_1(ddr); set_ddr_sdram_rcw_2(ddr); diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c index af7f73a..d4702d7 100644 --- a/cpu/mpc8xxx/ddr/options.c +++ b/cpu/mpc8xxx/ddr/options.c @@ -142,7 +142,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * - number of components, number of active ranks * - how much time you want to spend playing around */ - popts->twoT_en = 1; + popts->twoT_en = 0; popts->threeT_en = 0; /* diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 1f0b56c..d09c4c2 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -706,4 +706,3 @@ int cpu_eth_init(bd_t *bis) #endif return 0; } - diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 9073ee2..9d416ca 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -419,26 +419,6 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); } -/*----------------------------------------------------------------------- - * Read a register - */ -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return (buf); -} - -/*----------------------------------------------------------------------- - * Write a register - */ -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} - #if defined(CONFIG_I2C_MULTI_BUS) /* * Functions for multiple I2C bus handling diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 4b5349e..f2b8908 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -727,7 +727,7 @@ _start: ori r2,r2,0xffff mfdcr r1,ISRAM1_DPC and r1,r1,r2 /* Disable parity check */ - mtdcr ISRAM1_DPC,r1 + mtdcr ISRAM1_DPC,r1 mfdcr r1,ISRAM1_PMEG and r1,r1,r2 /* Disable pwr mgmt */ mtdcr ISRAM1_PMEG,r1 diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk index f0b86b7..af910e2 100644 --- a/cpu/pxa/config.mk +++ b/cpu/pxa/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c index 08042be..6b72ba1 100644 --- a/cpu/pxa/i2c.c +++ b/cpu/pxa/i2c.c @@ -455,19 +455,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } -uchar i2c_reg_read (uchar chip, uchar reg) -{ - uchar buf; - - PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg)); - i2c_read(chip, reg, 1, &buf, 1); - return (buf); -} - -void i2c_reg_write(uchar chip, uchar reg, uchar val) -{ - PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val)); - i2c_write(chip, reg, 1, &val, 1); -} - #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/s3c44b0/config.mk b/cpu/s3c44b0/config.mk index 6dc9c46..01e7040 100644 --- a/cpu/s3c44b0/config.mk +++ b/cpu/s3c44b0/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -msoft-float # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/sa1100/config.mk b/cpu/sa1100/config.mk index 5be7dfb..9ef4a19 100644 --- a/cpu/sa1100/config.mk +++ b/cpu/sa1100/config.mk @@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100 # # ======================================================================== PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile index 50f6720..346d328 100644 --- a/cpu/sh2/Makefile +++ b/cpu/sh2/Makefile @@ -28,18 +28,23 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o -OBJS = cpu.o interrupts.o watchdog.o time.o # cache.o +SOBJS = start.o +COBJS = cpu.o interrupts.o watchdog.o -all: .depend $(START) $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -######################################################################### +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +######################################################################### # defines $(obj).depend target include $(SRCTREE)/rules.mk diff --git a/cpu/sh2/time.c b/cpu/sh2/time.c deleted file mode 100644 index fcbb921..0000000 --- a/cpu/sh2/time.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2007,2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyright (C) 2008 Renesas Solutions Corp. - * - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/processor.h> - -#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */ -#define CMT_CMCSR_CALIB 0x0000 -#define CMT_MAX_COUNTER (0xFFFFFFFF) -#define CMT_TIMER_RESET (0xFFFF) - -static vu_long cmt0_timer; - -static void cmt_timer_start(unsigned int timer) -{ - writew(readw(CMSTR) | 0x01, CMSTR); -} - -static void cmt_timer_stop(unsigned int timer) -{ - writew(readw(CMSTR) & ~0x01, CMSTR); -} - -int timer_init(void) -{ - cmt0_timer = 0; - /* Divide clock by 32 */ - readw(CMCSR_0); - writew(CMT_CMCSR_INIT, CMCSR_0); - - /* User Device 0 only */ - cmt_timer_stop(0); - set_timer(CMT_TIMER_RESET); - cmt_timer_start(0); - - return 0; -} - -unsigned long long get_ticks(void) -{ - return cmt0_timer; -} - -static vu_long cmcnt; -ulong get_timer(ulong base) -{ - ulong data = readw(CMCNT_0); - - if (data >= cmcnt) - cmcnt = data - cmcnt; - else - cmcnt = (CMT_TIMER_RESET - cmcnt) + data; - - if ((cmt0_timer + cmcnt) > CMT_MAX_COUNTER) - cmt0_timer = ((cmt0_timer + cmcnt) - CMT_MAX_COUNTER); - else - cmt0_timer += cmcnt; - - cmcnt = data; - return cmt0_timer - base; -} - -void set_timer(ulong t) -{ - writew((u16) t, CMCOR_0); -} - -void reset_timer(void) -{ - cmt_timer_stop(0); - set_timer(CMT_TIMER_RESET); - cmt0_timer = 0; - cmt_timer_start(0); -} - -void udelay(unsigned long usec) -{ - unsigned int start = get_timer(0); - - while (get_timer((ulong) start) < (usec * (CONFIG_SYS_HZ / 1000000))) - continue; -} - -unsigned long get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/cpu/sh3/Makefile b/cpu/sh3/Makefile index 587413d..35e8f51 100644 --- a/cpu/sh3/Makefile +++ b/cpu/sh3/Makefile @@ -32,7 +32,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a SOBJS = start.o -COBJS = cpu.o interrupts.o watchdog.o time.o cache.o +COBJS = cpu.o interrupts.o watchdog.o cache.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/cpu/sh3/time.c b/cpu/sh3/time.c deleted file mode 100644 index aab3659..0000000 --- a/cpu/sh3/time.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2007 - * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - * - * (C) Copyright 2007 - * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> - -#define TMU_MAX_COUNTER (~0UL) - -static void tmu_timer_start(unsigned int timer) -{ - if (timer > 2) - return; - - outb(inb(TSTR) | (1 << timer), TSTR); -} - -static void tmu_timer_stop(unsigned int timer) -{ - u8 val = inb(TSTR); - - if (timer > 2) - return; - outb(val & ~(1 << timer), TSTR); -} - -int timer_init(void) -{ - /* Divide clock by 4 */ - outw(0, TCR0); - - tmu_timer_stop(0); - tmu_timer_start(0); - return 0; -} - -/* - In theory we should return a true 64bit value (ie something that doesn't - overflow). However, we don't. Therefore if TMU runs at fastest rate of - 6.75 MHz this value will wrap after u-boot has been running for approx - 10 minutes. -*/ -unsigned long long get_ticks(void) -{ - return (0 - inl(TCNT0)); -} - -unsigned long get_timer(unsigned long base) -{ - return ((0 - inl(TCNT0)) - base); -} - -void set_timer(unsigned long t) -{ - outl(0 - t, TCNT0); -} - -void reset_timer(void) -{ - tmu_timer_stop(0); - set_timer(0); - tmu_timer_start(0); -} - -void udelay(unsigned long usec) -{ - unsigned int start = get_timer(0); - unsigned int end = start + (usec * ((CONFIG_SYS_HZ + 500000) / 1000000)); - - while (get_timer(0) < end) - continue; -} - -unsigned long get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/cpu/sh4/Makefile b/cpu/sh4/Makefile index d3c5eef..3c96a49 100644 --- a/cpu/sh4/Makefile +++ b/cpu/sh4/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a SOBJS = start.o -COBJS = cpu.o interrupts.o watchdog.o time.o cache.o +COBJS = cpu.o interrupts.o watchdog.o cache.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/cpu/sh4/time.c b/cpu/sh4/time.c deleted file mode 100644 index 77e0ae2..0000000 --- a/cpu/sh4/time.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2007 - * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> - -#define TMU_MAX_COUNTER (~0UL) - -static void tmu_timer_start (unsigned int timer) -{ - if (timer > 2) - return; - - *((volatile unsigned char *) TSTR) |= (1 << timer); -} - -static void tmu_timer_stop (unsigned int timer) -{ - u8 val = *((volatile u8 *)TSTR); - if (timer > 2) - return; - *((volatile unsigned char *)TSTR) = val &~(1 << timer); -} - -int timer_init (void) -{ - /* Divide clock by 4 */ - *(volatile u16 *)TCR0 = 0; - - tmu_timer_stop(0); - tmu_timer_start(0); - return 0; -} - -/* - In theory we should return a true 64bit value (ie something that doesn't - overflow). However, we don't. Therefore if TMU runs at fastest rate of - 6.75 MHz this value will wrap after u-boot has been running for approx - 10 minutes. -*/ -unsigned long long get_ticks (void) -{ - return (0 - *((volatile u32 *) TCNT0)); -} - -unsigned long get_timer (unsigned long base) -{ - return ((0 - *((volatile u32 *) TCNT0)) - base); -} - -void set_timer (unsigned long t) -{ - *((volatile unsigned int *) TCNT0) = (0 - t); -} - -void reset_timer (void) -{ - tmu_timer_stop(0); - set_timer (0); - tmu_timer_start(0); -} - -void udelay (unsigned long usec) -{ - unsigned int start = get_timer (0); - unsigned int end = start + (usec * ((CONFIG_SYS_HZ + 500000) / 1000000)); - - while (get_timer (0) < end) - continue; -} - -unsigned long get_tbclk (void) -{ - return CONFIG_SYS_HZ; -} |