diff options
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 10 | ||||
-rw-r--r-- | cpu/ppc4xx/4xx_enet.c | 2 | ||||
-rw-r--r-- | cpu/ppc4xx/denali_spd_ddr2.c | 8 | ||||
-rw-r--r-- | cpu/ppc4xx/tlb.c | 4 | ||||
-rw-r--r-- | cpu/ppc4xx/traps.c | 26 |
5 files changed, 25 insertions, 25 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 9a5340c..a27e276 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -378,7 +378,7 @@ static phys_size_t sdram_memsize(void) mem_size+=4096; break; default: - printf("WARNING: Unsupported bank size (SDSZ=0x%x)!\n" + printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n" , sdsz); mem_size=0; break; @@ -860,8 +860,8 @@ static void check_rank_number(unsigned long *dimm_populated, if (dimm_rank > MAXRANKS) { - printf("ERROR: DRAM DIMM detected with %d ranks in " - "slot %d is not supported.\n", dimm_rank, dimm_num); + printf("ERROR: DRAM DIMM detected with %lu ranks in " + "slot %lu is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); spd_ddr_init_hang (); @@ -1062,7 +1062,7 @@ static void program_copt1(unsigned long *dimm_populated, dimm_32bit = TRUE; break; default: - printf("WARNING: Detected a DIMM with a data width of %d bits.\n", + printf("WARNING: Detected a DIMM with a data width of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n"); break; @@ -1615,7 +1615,7 @@ static void program_mode(unsigned long *dimm_populated, printf("Make sure the PLB speed is within the supported range of the DIMMs.\n"); printf("cas3=%d cas4=%d cas5=%d\n", cas_3_0_available, cas_4_0_available, cas_5_0_available); - printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", + printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); spd_ddr_init_hang (); } diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index c40e0ca..4e863dc 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -1076,7 +1076,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096); if (!bd_cached) { - printf("%s: Error allocating MAL descriptor buffers!\n"); + printf("%s: Error allocating MAL descriptor buffers!\n", __func__); return -1; } diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c index 3bd6375..670fc5c 100644 --- a/cpu/ppc4xx/denali_spd_ddr2.c +++ b/cpu/ppc4xx/denali_spd_ddr2.c @@ -339,7 +339,7 @@ static void get_spd_info(unsigned long dimm_ranks[], "\n", dimm_num, ranks_on_dimm); if (ranks_on_dimm > max_ranks_per_dimm) { printf("WARNING: DRAM DIMM in slot %lu has %lu " - "ranks.\n"); + "ranks.\n", dimm_num, ranks_on_dimm); if (1 == max_ranks_per_dimm) { printf("Only one rank will be used.\n"); } else { @@ -668,8 +668,8 @@ static void program_ddr0_03(unsigned long dimm_ranks[], "and 5.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range " "of the DIMMs.\n"); - printf("sdram_freq=%d cycle2=%d cycle3=%d cycle4=%d " - "cycle5=%d\n\n", sdram_freq, cycle_2_0_clk, + printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld " + "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); spd_ddr_init_hang(); } @@ -1248,7 +1248,7 @@ void board_add_ram_info(int use_default) if (!is_ecc_enabled()) { printf(" not"); } - printf(" enabled, %d MHz", (2 * get_bus_freq(0)) / 1000000); + printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000); mfsdram(DDR0_03, val); printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1); diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index f44822d..24a9a9c 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -316,12 +316,12 @@ static void program_tlb_addr(u64 phys_addr, virt_addr += TLB_1KB_SIZE; } } else { - printf("ERROR: no TLB size exists for the base address 0x%0X.\n", + printf("ERROR: no TLB size exists for the base address 0x%llx.\n", phys_addr); } if (rc != 0) - printf("ERROR: no TLB entries available for the base addr 0x%0X.\n", + printf("ERROR: no TLB entries available for the base addr 0x%llx.\n", phys_addr); } diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index 8b7e32a..55154b6 100644 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -214,7 +214,7 @@ MachineCheckException(struct pt_regs *regs) } #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) mfsdram(DDR0_00, val) ; - printf("DDR0: DDR0_00 %p\n", val); + printf("DDR0: DDR0_00 %lx\n", val); val = (val >> 16) & 0xff; if (val & 0x80) printf("DDR0: At least one interrupt active\n"); @@ -263,44 +263,44 @@ MachineCheckException(struct pt_regs *regs) break; default: mfsdram(DDR0_01, value2); - printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2); + printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2); } mfsdram(DDR0_23, val); if (((val >> 16) & 0xff) && corr_ecc) - printf("DDR0: Syndrome for correctable ECC event 0x%x\n", + printf("DDR0: Syndrome for correctable ECC event 0x%lx\n", (val >> 16) & 0xff); mfsdram(DDR0_23, val); if (((val >> 8) & 0xff) && uncorr_ecc) - printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n", + printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n", (val >> 8) & 0xff); mfsdram(DDR0_33, val); if (val) printf("DDR0: Address of command that caused an " - "Out-of-Range interrupt %p\n", val); + "Out-of-Range interrupt %lx\n", val); mfsdram(DDR0_34, val); if (val && uncorr_ecc) - printf("DDR0: Address of uncorrectable ECC event %p\n", val); + printf("DDR0: Address of uncorrectable ECC event %lx\n", val); mfsdram(DDR0_35, val); if (val && uncorr_ecc) - printf("DDR0: Address of uncorrectable ECC event %p\n", val); + printf("DDR0: Address of uncorrectable ECC event %lx\n", val); mfsdram(DDR0_36, val); if (val && uncorr_ecc) - printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val); mfsdram(DDR0_37, val); if (val && uncorr_ecc) - printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val); mfsdram(DDR0_38, val); if (val && corr_ecc) - printf("DDR0: Address of correctable ECC event %p\n", val); + printf("DDR0: Address of correctable ECC event %lx\n", val); mfsdram(DDR0_39, val); if (val && corr_ecc) - printf("DDR0: Address of correctable ECC event %p\n", val); + printf("DDR0: Address of correctable ECC event %lx\n", val); mfsdram(DDR0_40, val); if (val && corr_ecc) - printf("DDR0: Data of correctable ECC event 0x%08x\n", val); + printf("DDR0: Data of correctable ECC event 0x%08lx\n", val); mfsdram(DDR0_41, val); if (val && corr_ecc) - printf("DDR0: Data of correctable ECC event 0x%08x\n", val); + printf("DDR0: Data of correctable ECC event 0x%08lx\n", val); #endif /* CONFIG_440EPX */ #endif /* CONFIG_440 */ show_regs(regs); |