summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc86xx/cpu.c36
-rw-r--r--cpu/mpc86xx/cpu_init.c4
2 files changed, 39 insertions, 1 deletions
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index f7e012d..1887575 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2006,2009 Freescale Semiconductor, Inc.
+ * Copyright 2006,2009-2010 Freescale Semiconductor, Inc.
* Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
@@ -197,3 +197,37 @@ void mpc86xx_reginfo(void)
printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
}
+
+/*
+ * Set the DDR BATs to reflect the actual size of DDR.
+ *
+ * dram_size is the actual size of DDR, in bytes
+ *
+ * Note: we assume that CONFIG_MAX_MEM_MAPPED is 2G or smaller as we only
+ * are using a single BAT to cover DDR.
+ *
+ * If this is not true, (e.g. CONFIG_MAX_MEM_MAPPED is 2GB but HID0_XBSEN
+ * is not defined) then we might have a situation where U-Boot will attempt
+ * to relocated itself outside of the region mapped by DBAT0.
+ * This will cause a machine check.
+ *
+ * Currently we are limited to power of two sized DDR since we only use a
+ * single bat. If a non-power of two size is used that is less than
+ * CONFIG_MAX_MEM_MAPPED u-boot will crash.
+ *
+ */
+void setup_ddr_bat(phys_addr_t dram_size)
+{
+ unsigned long batu, bl;
+
+ bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED));
+
+ if (BATU_SIZE(bl) != dram_size) {
+ u64 sz = (u64)dram_size - BATU_SIZE(bl);
+ print_size(sz, " left unmapped\n");
+ }
+
+ batu = bl | BATU_VS | BATU_VP;
+ write_bat(DBAT0, batu, CONFIG_SYS_DBAT0L);
+ write_bat(IBAT0, batu, CONFIG_SYS_IBAT0L);
+}
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 5a78a9c..b4f047d 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -138,8 +138,12 @@ int cpu_init_r(void)
/* Set up BAT registers */
void setup_bats(void)
{
+#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L)
write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L);
+#endif
+#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L);
+#endif
write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L);
write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L);
write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L);