summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/blackfin/cache.S118
1 files changed, 72 insertions, 46 deletions
diff --git a/cpu/blackfin/cache.S b/cpu/blackfin/cache.S
index 9facadf..6ed655a 100644
--- a/cpu/blackfin/cache.S
+++ b/cpu/blackfin/cache.S
@@ -1,5 +1,10 @@
-/* cache.S - low level cache handling routines
- * Copyright (C) 2003-2007 Analog Devices Inc.
+/*
+ * Blackfin cache control code
+ *
+ * Copyright 2003-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
* Licensed under the GPL-2 or later.
*/
@@ -8,54 +13,75 @@
#include <asm/blackfin.h>
.text
-.align 2
-ENTRY(_blackfin_icache_flush_range)
- R2 = -32;
- R2 = R0 & R2;
- P0 = R2;
- P1 = R1;
- CSYNC;
+/* Since all L1 caches work the same way, we use the same method for flushing
+ * them. Only the actual flush instruction differs. We write this in asm as
+ * GCC can be hard to coax into writing nice hardware loops.
+ *
+ * Also, we assume the following register setup:
+ * R0 = start address
+ * R1 = end address
+ */
+.macro do_flush flushins:req optflushins optnopins label
+
+ R2 = -L1_CACHE_BYTES;
+
+ /* start = (start & -L1_CACHE_BYTES) */
+ R0 = R0 & R2;
+
+ /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
+ R1 += -1;
+ R1 = R1 & R2;
+ R1 += L1_CACHE_BYTES;
+
+ /* count = (end - start) >> L1_CACHE_SHIFT */
+ R2 = R1 - R0;
+ R2 >>= L1_CACHE_SHIFT;
+ P1 = R2;
+
+.ifnb \label
+\label :
+.endif
+ P0 = R0;
+ LSETUP (1f, 2f) LC1 = P1;
1:
- IFLUSH[P0++];
- CC = P0 < P1(iu);
- IF CC JUMP 1b(bp);
- IFLUSH[P0];
- SSYNC;
+.ifnb \optflushins
+ \optflushins [P0];
+.endif
+#if ANOMALY_05000443
+.ifb \optnopins
+2:
+.endif
+ \flushins [P0++];
+.ifnb \optnopins
+2: \optnopins;
+.endif
+#else
+2: \flushins [P0++];
+#endif
+
RTS;
+.endm
+
+/* Invalidate all instruction cache lines assocoiated with this memory area */
+ENTRY(_blackfin_icache_flush_range)
+ do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
-ENTRY(_blackfin_dcache_flush_range)
- R2 = -32;
- R2 = R0 & R2;
- P0 = R2;
- P1 = R1;
- CSYNC;
-1:
- FLUSH[P0++];
- CC = P0 < P1(iu);
- IF CC JUMP 1b(bp);
- FLUSH[P0];
- SSYNC;
- RTS;
-ENDPROC(_blackfin_dcache_flush_range)
+/* Flush all cache lines assocoiated with this area of memory. */
+ENTRY(_blackfin_icache_dcache_flush_range)
+ do_flush FLUSH, IFLUSH
+ENDPROC(_blackfin_icache_dcache_flush_range)
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back. Since the Blackfin ISA does not have an "invalidate"
+ * instruction, we use flush/invalidate. Perhaps as a speed optimization we
+ * could bang on the DTEST MMRs ...
+ */
ENTRY(_blackfin_dcache_flush_invalidate_range)
- R2 = -32;
- R2 = R0 & R2;
- P0 = R2;
- P1 = R1;
- CSYNC;
-1:
- FLUSHINV[P0++];
- CC = P0 < P1(iu);
- IF CC JUMP 1b(bp);
-
- /*
- * If the data crosses a cache line, then we'll be pointing to
- * the last cache line, but won't have flushed/invalidated it yet, so do
- * one more.
- */
- FLUSHINV[P0];
- SSYNC;
- RTS;
+ do_flush FLUSHINV
ENDPROC(_blackfin_dcache_flush_invalidate_range)
+
+/* Flush all data cache lines assocoiated with this memory area */
+ENTRY(_blackfin_dcache_flush_range)
+ do_flush FLUSH, , , .Ldfr
+ENDPROC(_blackfin_dcache_flush_range)