summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/arm926ejs/cpuinfo.c1
-rw-r--r--cpu/mcf52x2/cpu_init.c50
-rw-r--r--cpu/mcf52x2/serial.c2
3 files changed, 26 insertions, 27 deletions
diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/cpuinfo.c
index 410a235..8c98631 100644
--- a/cpu/arm926ejs/cpuinfo.c
+++ b/cpu/arm926ejs/cpuinfo.c
@@ -242,4 +242,3 @@ int print_cpuinfo (void)
}
#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
-
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index d33adc2..451e3f3 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -58,9 +58,9 @@ void cpu_init_f (void)
/* Enable UART pins */
mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
- MCF_GPIO_PAR_UART_U0RXD |
- MCF_GPIO_PAR_UART_U1RXD_UART1 |
- MCF_GPIO_PAR_UART_U1TXD_UART1);
+ MCF_GPIO_PAR_UART_U0RXD |
+ MCF_GPIO_PAR_UART_U1RXD_UART1 |
+ MCF_GPIO_PAR_UART_U1TXD_UART1);
/* Enable Ethernet pins */
mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
@@ -69,7 +69,7 @@ void cpu_init_f (void)
/*
* initialize higher level parts of CPU like timers
*/
-int cpu_init_r (void)
+int cpu_init_r (void)
{
return (0);
}
@@ -97,7 +97,7 @@ void cpu_init_f (void)
regp->sysctrl_reg.sc_scr = CFG_SCR;
regp->sysctrl_reg.sc_spr = CFG_SPR;
- /* Setup Ports: */
+ /* Setup Ports: */
regp->gpio_reg.gpio_pacnt = CFG_PACNT;
regp->gpio_reg.gpio_paddr = CFG_PADDR;
regp->gpio_reg.gpio_padat = CFG_PADAT;
@@ -147,15 +147,15 @@ void cpu_init_f (void)
#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
- /* enable instruction cache now */
- icache_enable();
+ /* enable instruction cache now */
+ icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
-int cpu_init_r (void)
+int cpu_init_r (void)
{
return (0);
}
@@ -178,7 +178,7 @@ void cpu_init_f (void)
/*
* initialize higher level parts of CPU like timers
*/
-int cpu_init_r (void)
+int cpu_init_r (void)
{
return (0);
}
@@ -202,23 +202,23 @@ void cpu_init_f (void)
volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
unsigned long pllcr;
#ifdef CFG_FAST_CLK
- pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */
+ pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */
#else
- pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */
+ pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */
#endif
- cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
- mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */
- mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */
- pllcr ^= 0x00000001; /* Set pll bypass to 1 */
- mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */
- udelay(0x20); /* Wait for a lock ... */
+ cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
+ mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */
+ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */
+ pllcr ^= 0x00000001; /* Set pll bypass to 1 */
+ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */
+ udelay(0x20); /* Wait for a lock ... */
#endif /* #ifndef CFG_PLL_BYPASS */
/*
* NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
- * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
- * which is their primary function.
- * ~Jeremy
+ * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
+ * which is their primary function.
+ * ~Jeremy
*/
mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
@@ -233,7 +233,7 @@ void cpu_init_f (void)
* (Internal Register Display) command
* ~Jeremy
*
- */
+ */
mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
@@ -252,9 +252,9 @@ void cpu_init_f (void)
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
- mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
+ mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
- mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
+ mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
/* Setup interrupt priorities for gpio7 */
/* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
@@ -282,7 +282,7 @@ void cpu_init_f (void)
/*
* initialize higher level parts of CPU like timers
*/
-int cpu_init_r (void)
+int cpu_init_r (void)
{
return (0);
}
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index c66bdef..1011788 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -106,7 +106,7 @@ void rs_serial_init(int port,int baudrate)
/* Set clock Select Register: Tx/Rx clock is timer */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
-
+
rs_serial_setbaudrate(port,baudrate);
/* Enable Tx/Rx */