summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/arm720t/serial.c2
-rw-r--r--cpu/arm920t/start.S128
-rw-r--r--cpu/ppc4xx/440spe_pcie.c10
-rw-r--r--cpu/ppc4xx/4xx_enet.c16
4 files changed, 38 insertions, 118 deletions
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 27eb73a..1b0e147 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -125,6 +125,8 @@ serial_puts (const char *s)
#elif defined(CONFIG_LPC2292)
+DECLARE_GLOBAL_DATA_PTR;
+
#include <asm/arch/hardware.h>
void serial_setbrg (void)
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index b9c364b..aefcdd1 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -27,9 +27,7 @@
#include <config.h>
#include <version.h>
-#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
-#include <led.h>
-#endif
+#include <status_led.h>
/*
*************************************************************************
@@ -41,7 +39,7 @@
.globl _start
-_start: b reset
+_start: b start_code
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
@@ -64,7 +62,7 @@ _fiq: .word fiq
/*
*************************************************************************
*
- * Startup Code (reset vector)
+ * Startup Code (called from the ARM reset exception vector)
*
* do important init only if we don't start from memory!
* relocate armboot to ram
@@ -106,10 +104,10 @@ FIQ_STACK_START:
/*
- * the actual reset code
+ * the actual start code
*/
-reset:
+start_code:
/*
* set the cpu to SVC32 mode
*/
@@ -118,58 +116,12 @@ reset:
orr r0,r0,#0xd3
msr cpsr,r0
-#if CONFIG_AT91RM9200
-#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
- bl LED_init
+ bl coloured_LED_init
bl red_LED_on
-#endif
-#ifdef CONFIG_BOOTBINFUNC
-/* code based on entry.S from ATMEL */
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define CKGR_MOR 0
- /* Get the CKGR Base Address */
- ldr r1, =AT91C_BASE_CKGR
-
-/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
-/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
- ldr r0, =0x0000FF01
- str r0, [r1, #CKGR_MOR]
- /* Add loop to compensate Main Oscillator startup time */
- ldr r0, =0x00000010
-LoopOsc:
- subs r0, r0, #1
- bhi LoopOsc
- /* scratch stack */
- ldr r1, =0x00204000
- /* Insure word alignment */
- bic r1, r1, #3
- /* Init stack SYS */
- mov sp, r1
- /*
- * This does a lot more than just set up the memory, which
- * is why it's called lowlevelinit
- */
- bl lowlevelinit /* in memsetup.S */
- bl icache_enable;
- /* ------------------------------------
- * Read/modify/write CP15 control register
- * -------------------------------------
- * read cp15 control register (cp15 r1) in r0
- * ------------------------------------
- */
- mrc p15, 0, r0, c1, c0, 0
- /* Reset bit :Little Endian end fast bus mode */
- ldr r3, =0xC0000080
- /* Set bit :Asynchronous clock mode, Not Fast Bus */
- ldr r4, =0xC0000000
- bic r0, r0, r3
- orr r0, r0, r4
- /* write r0 in cp15 control register (cp15 r1) */
- mcr p15, 0, r0, c1, c0, 0
-#endif /* CONFIG_BOOTBINFUNC */
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
/*
- * relocate exeception table
+ * relocate exception table
*/
ldr r0, =_start
ldr r1, =0x0
@@ -181,19 +133,20 @@ copyex:
bne copyex
#endif
-/* turn off the watchdog */
-#if defined(CONFIG_S3C2400)
-# define pWTCON 0x15300000
-# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
-# define CLKDIVN 0x14800014 /* clock divisor register */
-#elif defined(CONFIG_S3C2410)
-# define pWTCON 0x53000000
-# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
-# define INTSUBMSK 0x4A00001C
-# define CLKDIVN 0x4C000014 /* clock divisor register */
-#endif
-
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+ /* turn off the watchdog */
+
+# if defined(CONFIG_S3C2400)
+# define pWTCON 0x15300000
+# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
+# define CLKDIVN 0x14800014 /* clock divisor register */
+#else
+# define pWTCON 0x53000000
+# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
+# define INTSUBMSK 0x4A00001C
+# define CLKDIVN 0x4C000014 /* clock divisor register */
+# endif
+
ldr r0, =pWTCON
mov r1, #0x0
str r1, [r0]
@@ -226,25 +179,7 @@ copyex:
#endif
#ifdef CONFIG_AT91RM9200
-#ifdef CONFIG_BOOTBINFUNC
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* don't reloc during debug */
- beq stack_setup
-
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
-#else
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
@@ -284,27 +219,6 @@ clbss_l:str r2, [r0] /* clear loop... */
cmp r0, r1
ble clbss_l
-#if 0
- /* try doing this stuff after the relocation */
- ldr r0, =pWTCON
- mov r1, #0x0
- str r1, [r0]
-
- /*
- * mask all IRQs by setting all bits in the INTMR - default
- */
- mov r1, #0xffffffff
- ldr r0, =INTMR
- str r1, [r0]
-
- /* FCLK:HCLK:PCLK = 1:2:4 */
- /* default FCLK is 120 MHz ! */
- ldr r0, =CLKDIVN
- mov r1, #3
- str r1, [r0]
- /* END stuff after relocation */
-#endif
-
ldr pc, _start_armboot
_start_armboot: .word start_armboot
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 158f1c5..3eac0ae 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -104,7 +104,7 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
return 0;
-
+
address = pcie_get_base(hose, devfn);
offset += devfn << 4;
@@ -136,12 +136,12 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
int offset, int len, u32 val) {
u8 *address;
-
+
/*
* Bus numbers are relative to hose->first_busno
*/
devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
+
/*
* Same constraints as in pcie_read_config().
*/
@@ -151,7 +151,7 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
return 0;
-
+
address = pcie_get_base(hose, devfn);
offset += devfn << 4;
@@ -926,7 +926,7 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
in_le16((u16 *)(mbase + PCI_COMMAND)) |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
printf("PCIE:%d successfully set as rootpoint\n",port);
-
+
/* Set Device and Vendor Id */
switch (port) {
case 0:
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index cc8e734..71a9e37 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -138,7 +138,8 @@
#define BI_PHYMODE_MII 7
#endif
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GRX) || defined(CONFIG_440SP)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif
@@ -408,7 +409,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
@@ -500,7 +502,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
@@ -518,7 +521,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
if (failsafe <= 0)
printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
@@ -920,8 +924,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long pfc1;
mfsdr (sdr_pfc1, pfc1);
generated by cgit v1.1 at 2024-08-25 20:47:28 +0000