summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc5xxx/fec.c14
-rw-r--r--cpu/mpc8xx/cpu_init.c1
-rw-r--r--cpu/mpc8xx/start.S4
3 files changed, 6 insertions, 13 deletions
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 6e20faa..1df394a 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -286,16 +286,8 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
}
- if (fec->xcv_type == SEVENWIRE) {
- /*
- * Set FEC-Lite transmit control register(X_CNTRL):
- */
- /*fec->eth->x_cntrl = 0x00000002; */ /* half-duplex, heartbeat */
- fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
- } else {
- /*fec->eth->x_cntrl = 0x00000006; */ /* full-duplex, heartbeat */
- fec->eth->x_cntrl = 0x00000004; /* full-duplex, heartbeat disabled */
-
+ fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
+ if (fec->xcv_type != SEVENWIRE) {
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
@@ -485,7 +477,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
#endif
return -1;
}
- } while ((phyStatus & 0x0020) != 0x0020);
+ } while (!(phyStatus & 0x0004));
#if (DEBUG & 0x2)
printf("PHY auto neg complete! \n");
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index c7716dd..4dabd20 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -155,6 +155,7 @@ void cpu_init_f (volatile immap_t * immr)
defined(CONFIG_MHPC) || \
defined(CONFIG_PCU_E) || \
defined(CONFIG_R360MPI) || \
+ defined(CONFIG_RMU) || \
defined(CONFIG_RPXCLASSIC) || \
defined(CONFIG_RPXLITE) || \
defined(CONFIG_SPD823TS)
diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S
index 3ebcab4..33a3f6c 100644
--- a/cpu/mpc8xx/start.S
+++ b/cpu/mpc8xx/start.S
@@ -27,12 +27,12 @@
*
* The processor starts at 0x00000100 and the code is executed
* from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
+ * in memory, but as long we don't jump around before relocating,
* board_init lies at a quite high address and when the cpu has
* jumped there, everything is ok.
* This works because the cpu gives the FLASH (CS0) the whole
* address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
+ * the flash somewhere up there in the memory map.
*
* board_init will change CS0 to be positioned at the correct
* address and (s)dram will be positioned at address 0