summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc85xx/Makefile2
-rw-r--r--cpu/mpc85xx/tsec.c1074
-rw-r--r--cpu/mpc85xx/tsec.h494
3 files changed, 1 insertions, 1569 deletions
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 996915e..5298dc1 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o resetvec.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tsec.o \
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
OBJS = $(COBJS)
diff --git a/cpu/mpc85xx/tsec.c b/cpu/mpc85xx/tsec.c
deleted file mode 100644
index 5ac6334..0000000
--- a/cpu/mpc85xx/tsec.c
+++ /dev/null
@@ -1,1074 +0,0 @@
-/*
- * tsec.c
- * Freescale Three Speed Ethernet Controller driver
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * maintained by Jon Loeliger (loeliger@freescale.com)
- * author Andy Fleming
- *
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_TSEC_ENET)
-#include "tsec.h"
-
-#define TX_BUF_CNT 2
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-typedef volatile struct rtxbd {
- txbd8_t txbd[TX_BUF_CNT];
- rxbd8_t rxbd[PKTBUFSRX];
-} RTXBD;
-
-struct tsec_info_struct {
- unsigned int phyaddr;
- u32 flags;
- unsigned int phyregidx;
-};
-
-
-/* The tsec_info structure contains 3 values which the
- * driver uses to determine how to operate a given ethernet
- * device. For now, the structure is initialized with the
- * knowledge that all current implementations have 2 TSEC
- * devices, and one FEC. The information needed is:
- * phyaddr - The address of the PHY which is attached to
- * the given device.
- *
- * flags - This variable indicates whether the device
- * supports gigabit speed ethernet, and whether it should be
- * in reduced mode.
- *
- * phyregidx - This variable specifies which ethernet device
- * controls the MII Management registers which are connected
- * to the PHY. For 8540/8560, only TSEC1 (index 0) has
- * access to the PHYs, so all of the entries have "0".
- *
- * The values specified in the table are taken from the board's
- * config file in include/configs/. When implementing a new
- * board with ethernet capability, it is necessary to define:
- * TSEC1_PHY_ADDR
- * TSEC1_PHYIDX
- * TSEC2_PHY_ADDR
- * TSEC2_PHYIDX
- *
- * and for 8560:
- * FEC_PHY_ADDR
- * FEC_PHYIDX
- */
-static struct tsec_info_struct tsec_info[] = {
-#ifdef CONFIG_MPC85XX_TSEC1
- {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
-#else
- { 0, 0, 0},
-#endif
-#ifdef CONFIG_MPC85XX_TSEC2
- {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
-#else
- { 0, 0, 0},
-#endif
-#ifdef CONFIG_MPC85XX_FEC
- {FEC_PHY_ADDR, 0, FEC_PHYIDX},
-#else
-# ifdef CONFIG_MPC85XX_TSEC3
- {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
-# else
- { 0, 0, 0},
-# endif
-# ifdef CONFIG_MPC85XX_TSEC4
- {TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX},
-# else
- { 0, 0, 0},
-# endif
-#endif
-};
-
-#define MAXCONTROLLERS (4)
-
-static int relocated = 0;
-
-static struct tsec_private *privlist[MAXCONTROLLERS];
-
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length);
-static int tsec_recv(struct eth_device* dev);
-static int tsec_init(struct eth_device* dev, bd_t * bd);
-static void tsec_halt(struct eth_device* dev);
-static void init_registers(volatile tsec_t *regs);
-static void startup_tsec(struct eth_device *dev);
-static int init_phy(struct eth_device *dev);
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
-uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info * get_phy_info(struct eth_device *dev);
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
-static void adjust_link(struct eth_device *dev);
-static void relocate_cmds(void);
-
-/* Initialize device structure. Returns success if PHY
- * initialization succeeded (i.e. if it recognizes the PHY)
- */
-int tsec_initialize(bd_t *bis, int index, char *devname)
-{
- struct eth_device* dev;
- int i;
- struct tsec_private *priv;
-
- dev = (struct eth_device*) malloc(sizeof *dev);
-
- if(NULL == dev)
- return 0;
-
- memset(dev, 0, sizeof *dev);
-
- priv = (struct tsec_private *) malloc(sizeof(*priv));
-
- if(NULL == priv)
- return 0;
-
- privlist[index] = priv;
- priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index*TSEC_SIZE);
- priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
- tsec_info[index].phyregidx*TSEC_SIZE);
-
- priv->phyaddr = tsec_info[index].phyaddr;
- priv->flags = tsec_info[index].flags;
-
- sprintf(dev->name, devname);
- dev->iobase = 0;
- dev->priv = priv;
- dev->init = tsec_init;
- dev->halt = tsec_halt;
- dev->send = tsec_send;
- dev->recv = tsec_recv;
-
- /* Tell u-boot to get the addr from the env */
- for(i=0;i<6;i++)
- dev->enetaddr[i] = 0;
-
- eth_register(dev);
-
-
- /* Reset the MAC */
- priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
- priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
-
- /* Try to initialize PHY here, and return */
- return init_phy(dev);
-}
-
-
-/* Initializes data structures and registers for the controller,
- * and brings the interface up. Returns the link status, meaning
- * that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller. */
-int tsec_init(struct eth_device* dev, bd_t * bd)
-{
- uint tempval;
- char tmpbuf[MAC_ADDR_LEN];
- int i;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- /* Make sure the controller is stopped */
- tsec_halt(dev);
-
- /* Init MACCFG2. Defaults to GMII */
- regs->maccfg2 = MACCFG2_INIT_SETTINGS;
-
- /* Init ECNTRL */
- regs->ecntrl = ECNTRL_INIT_SETTINGS;
-
- /* Copy the station address into the address registers.
- * Backwards, because little endian MACS are dumb */
- for(i=0;i<MAC_ADDR_LEN;i++) {
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
- }
- (uint)(regs->macstnaddr1) = *((uint *)(tmpbuf));
-
- tempval = *((uint *)(tmpbuf +4));
-
- (uint)(regs->macstnaddr2) = tempval;
-
- /* reset the indices to zero */
- rxIdx = 0;
- txIdx = 0;
-
- /* Clear out (for the most part) the other registers */
- init_registers(regs);
-
- /* Ready the device for tx/rx */
- startup_tsec(dev);
-
- /* If there's no link, fail */
- return priv->link;
-
-}
-
-
-/* Write value to the device's PHY through the registers
- * specified in priv, modifying the register specified in regnum.
- * It will wait for the write to be done (or for a timeout to
- * expire) before exiting
- */
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
-{
- volatile tsec_t *regbase = priv->phyregs;
- uint phyid = priv->phyaddr;
- int timeout=1000000;
-
- regbase->miimadd = (phyid << 8) | regnum;
- regbase->miimcon = value;
- asm("msync");
-
- timeout=1000000;
- while((regbase->miimind & MIIMIND_BUSY) && timeout--);
-}
-
-
-/* Reads register regnum on the device's PHY through the
- * registers specified in priv. It lowers and raises the read
- * command, and waits for the data to become valid (miimind
- * notvalid bit cleared), and the bus to cease activity (miimind
- * busy bit cleared), and then returns the value
- */
-uint read_phy_reg(struct tsec_private *priv, uint regnum)
-{
- uint value;
- volatile tsec_t *regbase = priv->phyregs;
- uint phyid = priv->phyaddr;
-
- /* Put the address of the phy, and the register
- * number into MIIMADD */
- regbase->miimadd = (phyid << 8) | regnum;
-
- /* Clear the command register, and wait */
- regbase->miimcom = 0;
- asm("msync");
-
- /* Initiate a read command, and wait */
- regbase->miimcom = MIIM_READ_COMMAND;
- asm("msync");
-
- /* Wait for the the indication that the read is done */
- while((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY)));
-
- /* Grab the value read from the PHY */
- value = regbase->miimstat;
-
- return value;
-}
-
-
-/* Discover which PHY is attached to the device, and configure it
- * properly. If the PHY is not recognized, then return 0
- * (failure). Otherwise, return 1
- */
-static int init_phy(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- struct phy_info *curphy;
-
- /* Assign a Physical address to the TBI */
-
- {
- volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
- regs->tbipa = TBIPA_VALUE;
- regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
- regs->tbipa = TBIPA_VALUE;
- asm("msync");
- }
-
- /* Reset MII (due to new addresses) */
- priv->phyregs->miimcfg = MIIMCFG_RESET;
- asm("msync");
- priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
- asm("msync");
- while(priv->phyregs->miimind & MIIMIND_BUSY);
-
- if(0 == relocated)
- relocate_cmds();
-
- /* Get the cmd structure corresponding to the attached
- * PHY */
- curphy = get_phy_info(dev);
-
- if(NULL == curphy) {
- printf("%s: No PHY found\n", dev->name);
-
- return 0;
- }
-
- priv->phyinfo = curphy;
-
- phy_run_commands(priv, priv->phyinfo->config);
-
- return 1;
-}
-
-
-/* Returns which value to write to the control register. */
-/* For 10/100, the value is slightly different */
-uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
-{
- if(priv->flags & TSEC_GIGABIT)
- return MIIM_CONTROL_INIT;
- else
- return MIIM_CR_INIT;
-}
-
-
-/* Parse the status register for link, and then do
- * auto-negotiation */
-uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
-{
- uint timeout = TSEC_TIMEOUT;
-
- if(mii_reg & MIIM_STATUS_LINK)
- priv->link = 1;
- else
- priv->link = 0;
-
- if(priv->link) {
- while((!(mii_reg & MIIM_STATUS_AN_DONE)) && timeout--)
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
- }
-
- return 0;
-}
-
-
-/* Parse the 88E1011's status register for speed and duplex
- * information */
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
-{
- uint speed;
-
- if(mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg &MIIM_88E1011_PHYSTAT_SPEED);
-
- switch(speed) {
- case MIIM_88E1011_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_88E1011_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- }
-
- return 0;
-}
-
-
-/* Parse the cis8201's status register for speed and duplex
- * information */
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv)
-{
- uint speed;
-
- if(mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
- switch(speed) {
- case MIIM_CIS8201_AUXCONSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_CIS8201_AUXCONSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- break;
- }
-
- return 0;
-}
-
-
-/* Parse the DM9161's status register for speed and duplex
- * information */
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
-{
- if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
- priv->speed = 100;
- else
- priv->speed = 10;
-
- if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- return 0;
-}
-
-
-/* Hack to write all 4 PHYs with the LED values */
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
-{
- uint phyid;
- volatile tsec_t *regbase = priv->phyregs;
- int timeout=1000000;
-
- for(phyid=0;phyid<4;phyid++) {
- regbase->miimadd = (phyid << 8) | mii_reg;
- regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
- asm("msync");
-
- timeout=1000000;
- while((regbase->miimind & MIIMIND_BUSY) && timeout--);
- }
-
- return MIIM_CIS8204_SLEDCON_INIT;
-}
-
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
-{
- if (priv->flags & TSEC_REDUCED)
- return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
- else
- return MIIM_CIS8204_EPHYCON_INIT;
-}
-
-/* Initialized required registers to appropriate values, zeroing
- * those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value) */
-static void init_registers(volatile tsec_t *regs)
-{
- /* Clear IEVENT */
- regs->ievent = IEVENT_INIT_CLEAR;
-
- regs->imask = IMASK_INIT_CLEAR;
-
- regs->hash.iaddr0 = 0;
- regs->hash.iaddr1 = 0;
- regs->hash.iaddr2 = 0;
- regs->hash.iaddr3 = 0;
- regs->hash.iaddr4 = 0;
- regs->hash.iaddr5 = 0;
- regs->hash.iaddr6 = 0;
- regs->hash.iaddr7 = 0;
-
- regs->hash.gaddr0 = 0;
- regs->hash.gaddr1 = 0;
- regs->hash.gaddr2 = 0;
- regs->hash.gaddr3 = 0;
- regs->hash.gaddr4 = 0;
- regs->hash.gaddr5 = 0;
- regs->hash.gaddr6 = 0;
- regs->hash.gaddr7 = 0;
-
- regs->rctrl = 0x00000000;
-
- /* Init RMON mib registers */
- memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
-
- regs->rmon.cam1 = 0xffffffff;
- regs->rmon.cam2 = 0xffffffff;
-
- regs->mrblr = MRBLR_INIT_SETTINGS;
-
- regs->minflr = MINFLR_INIT_SETTINGS;
-
- regs->attr = ATTR_INIT_SETTINGS;
- regs->attreli = ATTRELI_INIT_SETTINGS;
-
-}
-
-
-/* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code */
-static void adjust_link(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- if(priv->link) {
- if(priv->duplexity != 0)
- regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
- else
- regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
-
- switch(priv->speed) {
- case 1000:
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
- | MACCFG2_GMII);
- break;
- case 100:
- case 10:
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
- | MACCFG2_MII);
-
- /* If We're in reduced mode, we
- * need to say whether we're 10
- * or 100 MB. */
- if ((priv->speed == 100)
- && (priv->flags & TSEC_REDUCED))
- regs->ecntrl |= ECNTRL_R100;
- else
- regs->ecntrl &= ~(ECNTRL_R100);
- break;
- default:
- printf("%s: Speed was bad\n", dev->name);
- break;
- }
-
- printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
-
- } else {
- printf("%s: No link.\n", dev->name);
- }
-}
-
-
-/* Set up the buffers and their descriptors, and bring up the
- * interface */
-static void startup_tsec(struct eth_device *dev)
-{
- int i;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- /* Point to the buffer descriptors */
- regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
- regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
-
- /* Initialize the Rx Buffer descriptors */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx.rxbd[i].status = RXBD_EMPTY;
- rtx.rxbd[i].length = 0;
- rtx.rxbd[i].bufPtr = (uint)NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX -1].status |= RXBD_WRAP;
-
- /* Initialize the TX Buffer Descriptors */
- for(i=0; i<TX_BUF_CNT; i++) {
- rtx.txbd[i].status = 0;
- rtx.txbd[i].length = 0;
- rtx.txbd[i].bufPtr = 0;
- }
- rtx.txbd[TX_BUF_CNT -1].status |= TXBD_WRAP;
-
- /* Start up the PHY */
- phy_run_commands(priv, priv->phyinfo->startup);
- adjust_link(dev);
-
- /* Enable Transmit and Receive */
- regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
-
- /* Tell the DMA it is clear to go */
- regs->dmactrl |= DMACTRL_INIT_SETTINGS;
- regs->tstat = TSTAT_CLEAR_THALT;
- regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
-}
-
-/* This returns the status bits of the device. The return value
- * is never checked, and this is what the 8260 driver did, so we
- * do the same. Presumably, this would be zero if there were no
- * errors */
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- /* Find an empty buffer descriptor */
- for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
- if (i >= TOUT_LOOP) {
- debug ("%s: tsec: tx buffers full\n", dev->name);
- return result;
- }
- }
-
- rtx.txbd[txIdx].bufPtr = (uint)packet;
- rtx.txbd[txIdx].length = length;
- rtx.txbd[txIdx].status |= (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
-
- /* Tell the DMA to go */
- regs->tstat = TSTAT_CLEAR_THALT;
-
- /* Wait for buffer to be transmitted */
- for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
- if (i >= TOUT_LOOP) {
- debug ("%s: tsec: tx error\n", dev->name);
- return result;
- }
- }
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
- result = rtx.txbd[txIdx].status & TXBD_STATS;
-
- return result;
-}
-
-static int tsec_recv(struct eth_device* dev)
-{
- int length;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
-
- length = rtx.rxbd[rxIdx].length;
-
- /* Send the packet up if there were no errors */
- if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
- NetReceive(NetRxPackets[rxIdx], length - 4);
- } else {
- printf("Got error %x\n",
- (rtx.rxbd[rxIdx].status & RXBD_STATS));
- }
-
- rtx.rxbd[rxIdx].length = 0;
-
- /* Set the wrap bit if this is the last element in the list */
- rtx.rxbd[rxIdx].status = RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
-
- rxIdx = (rxIdx + 1) % PKTBUFSRX;
- }
-
- if(regs->ievent&IEVENT_BSY) {
- regs->ievent = IEVENT_BSY;
- regs->rstat = RSTAT_CLEAR_RHALT;
- }
-
- return -1;
-
-}
-
-
-/* Stop the interface */
-static void tsec_halt(struct eth_device* dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
- regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
-
- while(!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC)));
-
- regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
-
- /* Shut down the PHY, as needed */
- phy_run_commands(priv, priv->phyinfo->shutdown);
-}
-
-
-struct phy_info phy_info_M88E1011S = {
- 0x01410c6,
- "Marvell 88E1011S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-struct phy_info phy_info_M88E1111S = {
- 0x01410cc,
- "Marvell 88E1111S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-struct phy_info phy_info_cis8204 = {
- 0x3f11,
- "Cicada Cis8204",
- 6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, &mii_cis8204_setmode},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/* Cicada 8201 */
-struct phy_info phy_info_cis8201 = {
- 0xfc41,
- "CIS8201",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-
-struct phy_info phy_info_dm9161 = {
- 0x0181b88,
- "Davicom DM9161E",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
- /* Do not bypass the scrambler/descrambler */
- {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
- /* Clear 10BTCSR to default */
- {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CR_INIT, NULL},
- /* Restart Auto Negotiation */
- {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
-{
- unsigned int speed;
- if (priv->link) {
- speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
-
- switch (speed) {
- case MIIM_LXT971_SR2_10HDX:
- priv->speed = 10;
- priv->duplexity = 0;
- break;
- case MIIM_LXT971_SR2_10FDX:
- priv->speed = 10;
- priv->duplexity = 1;
- break;
- case MIIM_LXT971_SR2_100HDX:
- priv->speed = 100;
- priv->duplexity = 0;
- default:
- priv->speed = 100;
- priv->duplexity = 1;
- break;
- }
- } else {
- priv->speed = 0;
- priv->duplexity = 0;
- }
-
- return 0;
-}
-
-static struct phy_info phy_info_lxt971 = {
- 0x0001378e,
- "LXT971",
- 4,
- (struct phy_cmd []) { /* config */
- { MIIM_CR, MIIM_CR_INIT, mii_cr_init }, /* autonegotiate */
- { miim_end, }
- },
- (struct phy_cmd []) { /* startup - enable interrupts */
- /* { 0x12, 0x00f2, NULL }, */
- { MIIM_STATUS, miim_read, NULL },
- { MIIM_STATUS, miim_read, &mii_parse_sr },
- { MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2 },
- { miim_end, }
- },
- (struct phy_cmd []) { /* shutdown - disable interrupts */
- { miim_end, }
- },
-};
-
-struct phy_info *phy_info[] = {
-#if 0
- &phy_info_cis8201,
-#endif
- &phy_info_cis8204,
- &phy_info_M88E1011S,
- &phy_info_M88E1111S,
- &phy_info_dm9161,
- &phy_info_lxt971,
- NULL
-};
-
-
-/* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches. If so, return
- * it, if not, return NULL */
-struct phy_info * get_phy_info(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- uint phy_reg, phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for(i=0; phy_info[i]; i++) {
- if(phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
- theInfo = phy_info[i];
- }
-
- if(theInfo == NULL)
- {
- printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
- return NULL;
- } else {
- printf("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
- phy_ID);
- }
-
- return theInfo;
-}
-
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary*/
-void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
-{
- int i;
- uint result;
- volatile tsec_t *phyregs = priv->phyregs;
-
- phyregs->miimcfg = MIIMCFG_RESET;
-
- phyregs->miimcfg = MIIMCFG_INIT_VALUE;
-
- while(phyregs->miimind & MIIMIND_BUSY);
-
- for(i=0;cmd->mii_reg != miim_end;i++) {
- if(cmd->mii_data == miim_read) {
- result = read_phy_reg(priv, cmd->mii_reg);
-
- if(cmd->funct != NULL)
- (*(cmd->funct))(result, priv);
-
- } else {
- if(cmd->funct != NULL)
- result = (*(cmd->funct))(cmd->mii_reg, priv);
- else
- result = cmd->mii_data;
-
- write_phy_reg(priv, cmd->mii_reg, result);
-
- }
- cmd++;
- }
-}
-
-
-/* Relocate the function pointers in the phy cmd lists */
-static void relocate_cmds(void)
-{
- struct phy_cmd **cmdlistptr;
- struct phy_cmd *cmd;
- int i,j,k;
- DECLARE_GLOBAL_DATA_PTR;
-
- for(i=0; phy_info[i]; i++) {
- /* First thing's first: relocate the pointers to the
- * PHY command structures (the structs were done) */
- phy_info[i] = (struct phy_info *) ((uint)phy_info[i]
- + gd->reloc_off);
- phy_info[i]->name += gd->reloc_off;
- phy_info[i]->config =
- (struct phy_cmd *)((uint)phy_info[i]->config
- + gd->reloc_off);
- phy_info[i]->startup =
- (struct phy_cmd *)((uint)phy_info[i]->startup
- + gd->reloc_off);
- phy_info[i]->shutdown =
- (struct phy_cmd *)((uint)phy_info[i]->shutdown
- + gd->reloc_off);
-
- cmdlistptr = &phy_info[i]->config;
- j=0;
- for(;cmdlistptr <= &phy_info[i]->shutdown;cmdlistptr++) {
- k=0;
- for(cmd=*cmdlistptr;cmd->mii_reg != miim_end;cmd++) {
- /* Only relocate non-NULL pointers */
- if(cmd->funct)
- cmd->funct += gd->reloc_off;
-
- k++;
- }
- j++;
- }
- }
-
- relocated = 1;
-}
-
-
-#ifndef CONFIG_BITBANGMII
-
-struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
-{
- int i;
-
- for(i=0;i<MAXCONTROLLERS;i++) {
- if(privlist[i]->phyaddr == phyaddr)
- return privlist[i];
- }
-
- return NULL;
-}
-
-/*
- * Read a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
-{
- unsigned short ret;
- struct tsec_private *priv = get_priv_for_phy(addr);
-
- if(NULL == priv) {
- printf("Can't read PHY at address %d\n", addr);
- return -1;
- }
-
- ret = (unsigned short)read_phy_reg(priv, reg);
- *value = ret;
-
- return 0;
-}
-
-/*
- * Write a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
-{
- struct tsec_private *priv = get_priv_for_phy(addr);
-
- if(NULL == priv) {
- printf("Can't write PHY at address %d\n", addr);
- return -1;
- }
-
- write_phy_reg(priv, reg, value);
-
- return 0;
-}
-
-#endif /* CONFIG_BITBANGMII */
-
-#endif /* CONFIG_TSEC_ENET */
diff --git a/cpu/mpc85xx/tsec.h b/cpu/mpc85xx/tsec.h
deleted file mode 100644
index d1c70aa..0000000
--- a/cpu/mpc85xx/tsec.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * tsec.h
- *
- * Driver for the Motorola Triple Speed Ethernet Controller
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * maintained by Xianghua Xiao (x.xiao@motorola.com)
- * author Andy Fleming
- *
- */
-
-#ifndef __TSEC_H
-#define __TSEC_H
-
-#include <net.h>
-#include <mpc85xx.h>
-
-#define TSEC_BASE_ADDR (CFG_IMMR + 0x24000)
-#define TSEC_SIZE 0x01000
-
-#define MAC_ADDR_LEN 6
-
-/* #define TSEC_TIMEOUT 1000000 */
-#define TSEC_TIMEOUT 1000
-#define TOUT_LOOP 1000000
-
-/* MAC register bits */
-#define MACCFG1_SOFT_RESET 0x80000000
-#define MACCFG1_RESET_RX_MC 0x00080000
-#define MACCFG1_RESET_TX_MC 0x00040000
-#define MACCFG1_RESET_RX_FUN 0x00020000
-#define MACCFG1_RESET_TX_FUN 0x00010000
-#define MACCFG1_LOOPBACK 0x00000100
-#define MACCFG1_RX_FLOW 0x00000020
-#define MACCFG1_TX_FLOW 0x00000010
-#define MACCFG1_SYNCD_RX_EN 0x00000008
-#define MACCFG1_RX_EN 0x00000004
-#define MACCFG1_SYNCD_TX_EN 0x00000002
-#define MACCFG1_TX_EN 0x00000001
-
-#define MACCFG2_INIT_SETTINGS 0x00007205
-#define MACCFG2_FULL_DUPLEX 0x00000001
-#define MACCFG2_IF 0x00000300
-#define MACCFG2_GMII 0x00000200
-#define MACCFG2_MII 0x00000100
-
-#define ECNTRL_INIT_SETTINGS 0x00001000
-#define ECNTRL_TBI_MODE 0x00000020
-#define ECNTRL_R100 0x00000008
-
-#define miim_end -2
-#define miim_read -1
-
-#define TBIPA_VALUE 0x1f
-#define MIIMCFG_INIT_VALUE 0x00000003
-#define MIIMCFG_RESET 0x80000000
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define MIIM_CONTROL 0x00
-#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_ANEN 0x00001000
-
-#define MIIM_CR 0x00
-#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
-
-#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_STATUS_LINK 0x0004
-
-#define MIIM_PHYIR1 0x2
-#define MIIM_PHYIR2 0x3
-
-#define MIIM_ANAR 0x4
-#define MIIM_ANAR_INIT 0x1e1
-
-#define MIIM_TBI_ANLPBPA 0x5
-#define MIIM_TBI_ANLPBPA_HALF 0x00000040
-#define MIIM_TBI_ANLPBPA_FULL 0x00000020
-
-#define MIIM_TBI_ANEX 0x6
-#define MIIM_TBI_ANEX_NP 0x00000004
-#define MIIM_TBI_ANEX_PRX 0x00000002
-
-#define MIIM_GBIT_CONTROL 0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT 0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1 0x17
-#define MIIM_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON 0x17
-#define MIIM_CIS8204_EPHYCON_INIT 0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII 0x1000
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON 0x1b
-#define MIIM_CIS8204_SLEDCON_INIT 0x1115
-
-#define MIIM_GBIT_CON 0x09
-#define MIIM_GBIT_CON_ADVERT 0x0e00
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
-#define MIIM_88E1011_PHYSTAT_LINK 0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP 0x0400
-#define MIIM_DM9161_CR_RSTAN 0x1200
-
-#define MIIM_DM9161_SCR 0x10
-#define MIIM_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR 0x11
-#define MIIM_DM9161_SCSR_100F 0x8000
-#define MIIM_DM9161_SCSR_100H 0x4000
-#define MIIM_DM9161_SCSR_10F 0x2000
-#define MIIM_DM9161_SCSR_10H 0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR 0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2 17 /* Status Register 2 */
-#define MIIM_LXT971_SR2_SPEED_MASK 0xf000
-#define MIIM_LXT971_SR2_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX 0x2000 /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX 0x8000 /* 100 Mbit full duplex selected */
-
-#define MIIM_READ_COMMAND 0x00000001
-
-#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
-
-#define MINFLR_INIT_SETTINGS 0x00000040
-
-#define DMACTRL_INIT_SETTINGS 0x000000c3
-#define DMACTRL_GRS 0x00000010
-#define DMACTRL_GTS 0x00000008
-
-#define TSTAT_CLEAR_THALT 0x80000000
-#define RSTAT_CLEAR_RHALT 0x00800000
-
-
-#define IEVENT_INIT_CLEAR 0xffffffff
-#define IEVENT_BABR 0x80000000
-#define IEVENT_RXC 0x40000000
-#define IEVENT_BSY 0x20000000
-#define IEVENT_EBERR 0x10000000
-#define IEVENT_MSRO 0x04000000
-#define IEVENT_GTSC 0x02000000
-#define IEVENT_BABT 0x01000000
-#define IEVENT_TXC 0x00800000
-#define IEVENT_TXE 0x00400000
-#define IEVENT_TXB 0x00200000
-#define IEVENT_TXF 0x00100000
-#define IEVENT_IE 0x00080000
-#define IEVENT_LC 0x00040000
-#define IEVENT_CRL 0x00020000
-#define IEVENT_XFUN 0x00010000
-#define IEVENT_RXB0 0x00008000
-#define IEVENT_GRSC 0x00000100
-#define IEVENT_RXF0 0x00000080
-
-#define IMASK_INIT_CLEAR 0x00000000
-#define IMASK_TXEEN 0x00400000
-#define IMASK_TXBEN 0x00200000
-#define IMASK_TXFEN 0x00100000
-#define IMASK_RXFEN0 0x00000080
-
-
-/* Default Attribute fields */
-#define ATTR_INIT_SETTINGS 0x000000c0
-#define ATTRELI_INIT_SETTINGS 0x00000000
-
-
-/* TxBD status field bits */
-#define TXBD_READY 0x8000
-#define TXBD_PADCRC 0x4000
-#define TXBD_WRAP 0x2000
-#define TXBD_INTERRUPT 0x1000
-#define TXBD_LAST 0x0800
-#define TXBD_CRC 0x0400
-#define TXBD_DEF 0x0200
-#define TXBD_HUGEFRAME 0x0080
-#define TXBD_LATECOLLISION 0x0080
-#define TXBD_RETRYLIMIT 0x0040
-#define TXBD_RETRYCOUNTMASK 0x003c
-#define TXBD_UNDERRUN 0x0002
-#define TXBD_STATS 0x03ff
-
-/* RxBD status field bits */
-#define RXBD_EMPTY 0x8000
-#define RXBD_RO1 0x4000
-#define RXBD_WRAP 0x2000
-#define RXBD_INTERRUPT 0x1000
-#define RXBD_LAST 0x0800
-#define RXBD_FIRST 0x0400
-#define RXBD_MISS 0x0100
-#define RXBD_BROADCAST 0x0080
-#define RXBD_MULTICAST 0x0040
-#define RXBD_LARGE 0x0020
-#define RXBD_NONOCTET 0x0010
-#define RXBD_SHORT 0x0008
-#define RXBD_CRCERR 0x0004
-#define RXBD_OVERRUN 0x0002
-#define RXBD_TRUNCATED 0x0001
-#define RXBD_STATS 0x003f
-
-typedef struct txbd8
-{
- ushort status; /* Status Fields */
- ushort length; /* Buffer length */
- uint bufPtr; /* Buffer Pointer */
-} txbd8_t;
-
-typedef struct rxbd8
-{
- ushort status; /* Status Fields */
- ushort length; /* Buffer Length */
- uint bufPtr; /* Buffer Pointer */
-} rxbd8_t;
-
-typedef struct rmon_mib
-{
- /* Transmit and Receive Counters */
- uint tr64; /* Transmit and Receive 64-byte Frame Counter */
- uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */
- uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */
- uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */
- uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */
- uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */
- uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */
- /* Receive Counters */
- uint rbyt; /* Receive Byte Counter */
- uint rpkt; /* Receive Packet Counter */
- uint rfcs; /* Receive FCS Error Counter */
- uint rmca; /* Receive Multicast Packet (Counter) */
- uint rbca; /* Receive Broadcast Packet */
- uint rxcf; /* Receive Control Frame Packet */
- uint rxpf; /* Receive Pause Frame Packet */
- uint rxuo; /* Receive Unknown OP Code */
- uint raln; /* Receive Alignment Error */
- uint rflr; /* Receive Frame Length Error */
- uint rcde; /* Receive Code Error */
- uint rcse; /* Receive Carrier Sense Error */
- uint rund; /* Receive Undersize Packet */
- uint rovr; /* Receive Oversize Packet */
- uint rfrg; /* Receive Fragments */
- uint rjbr; /* Receive Jabber */
- uint rdrp; /* Receive Drop */
- /* Transmit Counters */
- uint tbyt; /* Transmit Byte Counter */
- uint tpkt; /* Transmit Packet */
- uint tmca; /* Transmit Multicast Packet */
- uint tbca; /* Transmit Broadcast Packet */
- uint txpf; /* Transmit Pause Control Frame */
- uint tdfr; /* Transmit Deferral Packet */
- uint tedf; /* Transmit Excessive Deferral Packet */
- uint tscl; /* Transmit Single Collision Packet */
- /* (0x2_n700) */
- uint tmcl; /* Transmit Multiple Collision Packet */
- uint tlcl; /* Transmit Late Collision Packet */
- uint txcl; /* Transmit Excessive Collision Packet */
- uint tncl; /* Transmit Total Collision */
-
- uint res2;
-
- uint tdrp; /* Transmit Drop Frame */
- uint tjbr; /* Transmit Jabber Frame */
- uint tfcs; /* Transmit FCS Error */
- uint txcf; /* Transmit Control Frame */
- uint tovr; /* Transmit Oversize Frame */
- uint tund; /* Transmit Undersize Frame */
- uint tfrg; /* Transmit Fragments Frame */
- /* General Registers */
- uint car1; /* Carry Register One */
- uint car2; /* Carry Register Two */
- uint cam1; /* Carry Register One Mask */
- uint cam2; /* Carry Register Two Mask */
-} rmon_mib_t;
-
-typedef struct tsec_hash_regs
-{
- uint iaddr0; /* Individual Address Register 0 */
- uint iaddr1; /* Individual Address Register 1 */
- uint iaddr2; /* Individual Address Register 2 */
- uint iaddr3; /* Individual Address Register 3 */
- uint iaddr4; /* Individual Address Register 4 */
- uint iaddr5; /* Individual Address Register 5 */
- uint iaddr6; /* Individual Address Register 6 */
- uint iaddr7; /* Individual Address Register 7 */
- uint res1[24];
- uint gaddr0; /* Group Address Register 0 */
- uint gaddr1; /* Group Address Register 1 */
- uint gaddr2; /* Group Address Register 2 */
- uint gaddr3; /* Group Address Register 3 */
- uint gaddr4; /* Group Address Register 4 */
- uint gaddr5; /* Group Address Register 5 */
- uint gaddr6; /* Group Address Register 6 */
- uint gaddr7; /* Group Address Register 7 */
- uint res2[24];
-} tsec_hash_t;
-
-typedef struct tsec
-{
- /* General Control and Status Registers (0x2_n000) */
- uint res000[4];
-
- uint ievent; /* Interrupt Event */
- uint imask; /* Interrupt Mask */
- uint edis; /* Error Disabled */
- uint res01c;
- uint ecntrl; /* Ethernet Control */
- uint minflr; /* Minimum Frame Length */
- uint ptv; /* Pause Time Value */
- uint dmactrl; /* DMA Control */
- uint tbipa; /* TBI PHY Address */
-
- uint res034[3];
- uint res040[48];
-
- /* Transmit Control and Status Registers (0x2_n100) */
- uint tctrl; /* Transmit Control */
- uint tstat; /* Transmit Status */
- uint res108;
- uint tbdlen; /* Tx BD Data Length */
- uint res110[5];
- uint ctbptr; /* Current TxBD Pointer */
- uint res128[23];
- uint tbptr; /* TxBD Pointer */
- uint res188[30];
- /* (0x2_n200) */
- uint res200;
- uint tbase; /* TxBD Base Address */
- uint res208[42];
- uint ostbd; /* Out of Sequence TxBD */
- uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
- uint res2b8[18];
-
- /* Receive Control and Status Registers (0x2_n300) */
- uint rctrl; /* Receive Control */
- uint rstat; /* Receive Status */
- uint res308;
- uint rbdlen; /* RxBD Data Length */
- uint res310[4];
- uint res320;
- uint crbptr; /* Current Receive Buffer Pointer */
- uint res328[6];
- uint mrblr; /* Maximum Receive Buffer Length */
- uint res344[16];
- uint rbptr; /* RxBD Pointer */
- uint res388[30];
- /* (0x2_n400) */
- uint res400;
- uint rbase; /* RxBD Base Address */
- uint res408[62];
-
- /* MAC Registers (0x2_n500) */
- uint maccfg1; /* MAC Configuration #1 */
- uint maccfg2; /* MAC Configuration #2 */
- uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */
- uint hafdup; /* Half-duplex */
- uint maxfrm; /* Maximum Frame */
- uint res514;
- uint res518;
-
- uint res51c;
-
- uint miimcfg; /* MII Management: Configuration */
- uint miimcom; /* MII Management: Command */
- uint miimadd; /* MII Management: Address */
- uint miimcon; /* MII Management: Control */
- uint miimstat; /* MII Management: Status */
- uint miimind; /* MII Management: Indicators */
-
- uint res538;
-
- uint ifstat; /* Interface Status */
- uint macstnaddr1; /* Station Address, part 1 */
- uint macstnaddr2; /* Station Address, part 2 */
- uint res548[46];
-
- /* (0x2_n600) */
- uint res600[32];
-
- /* RMON MIB Registers (0x2_n680-0x2_n73c) */
- rmon_mib_t rmon;
- uint res740[48];
-
- /* Hash Function Registers (0x2_n800) */
- tsec_hash_t hash;
-
- uint res900[128];
-
- /* Pattern Registers (0x2_nb00) */
- uint resb00[62];
- uint attr; /* Default Attribute Register */
- uint attreli; /* Default Attribute Extract Length and Index */
-
- /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
- uint resc00[256];
-} tsec_t;
-
-#define TSEC_GIGABIT (1)
-
-/* This flag currently only has
- * meaning if we're using the eTSEC */
-#define TSEC_REDUCED (1 << 1)
-
-struct tsec_private {
- volatile tsec_t *regs;
- volatile tsec_t *phyregs;
- struct phy_info *phyinfo;
- uint phyaddr;
- u32 flags;
- uint link;
- uint duplexity;
- uint speed;
-};
-
-
-/*
- * struct phy_cmd: A command for reading or writing a PHY register
- *
- * mii_reg: The register to read or write
- *
- * mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
- * from the PHY, and process it.
- * For writes, the result of this function will be written
- * to the PHY register
- */
-struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint (*funct) (uint mii_reg, struct tsec_private* priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
-};
-
-#endif /* __TSEC_H */
generated by cgit v1.1 at 2024-11-22 04:35:03 +0000