summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc83xx/cpu_init.c4
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c42
-rw-r--r--cpu/ppc4xx/4xx_pci.c44
-rw-r--r--cpu/ppc4xx/cpu.c2
-rw-r--r--cpu/ppc4xx/cpu_init.c5
-rw-r--r--cpu/ppc4xx/start.S1
-rw-r--r--cpu/ppc4xx/uic.c2
7 files changed, 70 insertions, 30 deletions
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 414565c..03b6c86 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -303,11 +303,11 @@ void cpu_init_f (volatile immap_t * im)
struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
/* Configure interface. */
- setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
+ setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
/* Wait for clock to stabilize */
do {
- temp = in_be32((void *)ehci->control);
+ temp = in_be32(&ehci->control);
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 33788cc..2ab2336 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,6 +60,14 @@
"SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
} while (0)
+#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ data = mfdcr(SDRAM_##mnemonic); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
#if defined(CONFIG_440)
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2
@@ -714,11 +722,11 @@ static void check_mem_type(unsigned long *dimm_populated,
spd_ddr_init_hang ();
break;
case 7:
- debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
+ debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
dimm_populated[dimm_num] = SDRAM_DDR1;
break;
case 8:
- debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
+ debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
dimm_populated[dimm_num] = SDRAM_DDR2;
break;
default:
@@ -796,7 +804,7 @@ static void check_frequency(unsigned long *dimm_populated,
else
cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
((tcyc_reg & 0x0F)*10);
- debug("cycle_time=%d [10 picoseconds]\n", cycle_time);
+ debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
if (cycle_time > (calc_cycle_time + 10)) {
/*
@@ -1407,7 +1415,7 @@ static void program_mode(unsigned long *dimm_populated,
mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
- debug("sdram_freq=%d\n", sdram_freq);
+ debug("sdram_freq=%lu\n", sdram_freq);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
@@ -1437,7 +1445,7 @@ static void program_mode(unsigned long *dimm_populated,
/* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- debug("cas_bit[SPD byte 18]=%02x\n", cas_bit);
+ debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
/* For a particular DIMM, grab the three CAS values it supports */
for (cas_index = 0; cas_index < 3; cas_index++) {
@@ -1469,7 +1477,7 @@ static void program_mode(unsigned long *dimm_populated,
(((tcyc_reg & 0xF0) >> 4) * 100) +
((tcyc_reg & 0x0F)*10);
}
- debug("cas_index=%d: cycle_time_ns_x_100=%d\n", cas_index,
+ debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
cycle_time_ns_x_100[cas_index]);
}
@@ -1580,9 +1588,9 @@ static void program_mode(unsigned long *dimm_populated,
cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
- debug("cycle_3_0_clk=%d\n", cycle_3_0_clk);
- debug("cycle_4_0_clk=%d\n", cycle_4_0_clk);
- debug("cycle_5_0_clk=%d\n", cycle_5_0_clk);
+ debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
if (sdram_ddr1 == TRUE) { /* DDR1 */
if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
@@ -2797,13 +2805,13 @@ calibration_loop:
}
mfsdram(SDRAM_DLCR, val);
- debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RQDC, val);
- debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RFDC, val);
- debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RDCC, val);
- debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
}
#else /* calibration test with hardvalues */
/*-----------------------------------------------------------------------------+
@@ -3196,10 +3204,10 @@ inline void ppc4xx_ibm_ddr2_register_dump(void)
#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R0BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R1BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R2BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R3BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
#endif /* (defined(CONFIG_440SP) || ... */
#if defined(CONFIG_405EX)
PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 99b8e2f..4b5d636 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -87,6 +87,20 @@ DECLARE_GLOBAL_DATA_PTR;
*/
int __pci_pre_init(struct pci_controller *hose)
{
+#if defined (CONFIG_405EP)
+ /*
+ * Enable the internal PCI arbiter by default.
+ *
+ * On 405EP CPUs the internal arbiter can be controlled
+ * by the I2C strapping EEPROM. If you want to do so
+ * or if you want to disable the arbiter pci_pre_init()
+ * must be reimplemented without enabling the arbiter.
+ * The arbiter is enabled in this place because of
+ * compatibility reasons.
+ */
+ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
return 1;
}
int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init")));
@@ -99,6 +113,19 @@ ushort pmc405_pci_subsys_deviceid(void);
/*#define DEBUG*/
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+ if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ return 1;
+#elif defined (CONFIG_405EP)
+ if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+ return 1;
+#endif
+ return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
+
/*-----------------------------------------------------------------------------+
* pci_init. Initializes the 405GP PCI Configuration regs.
*-----------------------------------------------------------------------------*/
@@ -270,7 +297,7 @@ void pci_405gp_init(struct pci_controller *hose)
*/
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
#ifdef CONFIG_CPCI405
- if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ if (is_pci_host(hose))
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
else
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
@@ -295,7 +322,7 @@ void pci_405gp_init(struct pci_controller *hose)
#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
@@ -310,8 +337,15 @@ void pci_405gp_init(struct pci_controller *hose)
}
#endif
-#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */
- pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */
+#if defined(CONFIG_405EP)
+ /*
+ * on ppc405ep vendor/device id is not set
+ * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+ * are the correct values.
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
#endif
/*
@@ -325,7 +359,7 @@ void pci_405gp_init(struct pci_controller *hose)
* Scan the PCI bus and configure devices found.
*--------------------------------------------------------------------------*/
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 06f44ad..fb3837c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -54,6 +54,7 @@ int __get_cpu_num(void)
}
int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+#if defined(CONFIG_PCI)
#if defined(CONFIG_405GP) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -76,6 +77,7 @@ static int pci_async_enabled(void)
#endif
}
#endif
+#endif /* CONFIG_PCI */
#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
!defined(CONFIG_405) && !defined(CONFIG_405EX)
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 577d33f..bbd795d 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -174,11 +174,6 @@ cpu_init_f (void)
* Set EMAC noise filter bits
*/
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-
- /*
- * Enable the internal PCI arbiter
- */
- mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
#endif /* CONFIG_405EP */
#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index ac96fc2..582c781 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -2021,6 +2021,7 @@ pci_wait:
! Output r3 = none
!-----------------------------------------------------------------------------
*/
+ .globl pll_write
pll_write:
mfdcr r5, CPC0_UCR
andis. r5,r5,0xFFFF
diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c
index a95d1cb..d298b31 100644
--- a/cpu/ppc4xx/uic.c
+++ b/cpu/ppc4xx/uic.c
@@ -164,7 +164,7 @@ void pic_irq_enable(unsigned int vec)
else if (vec >= 96)
mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec));
- debug("Install interrupt for vector %d ==> %p\n", vec, handler);
+ debug("Install interrupt vector %d\n", vec);
}
void pic_irq_disable(unsigned int vec)
generated by cgit v1.1 at 2024-11-12 00:27:45 +0000