summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc86xx/cpu.c8
-rw-r--r--cpu/mpc86xx/spd_sdram.c135
2 files changed, 43 insertions, 100 deletions
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index fc77d99..0e82e74 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -276,22 +276,22 @@ void ft_cpu_setup(void *blob, bd_t *bd)
*p = cpu_to_be32(clock);
#if defined(CONFIG_MPC86XX_TSEC1)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
memcpy(p, bd->bi_enetaddr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC2)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
memcpy(p, bd->bi_enet1addr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC3)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
memcpy(p, bd->bi_enet2addr, 6);
#endif
#if defined(CONFIG_MPC86XX_TSEC4)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
memcpy(p, bd->bi_enet3addr, 6);
#endif
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index f30bbbd..a4b9d54 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -44,7 +44,7 @@ extern int dma_xfer(void *dest, uint count, void *src);
/*
* Only one of the following three should be 1; others should be 0
* By default the cache line interleaving is selected if
- * the CONFIG_DDR_INTERLEAVE flag is defined in MPC8641HPCN.h
+ * the CONFIG_DDR_INTERLEAVE flag is defined
*/
#define CFG_PAGE_INTERLEAVING 0
#define CFG_BANK_INTERLEAVING 0
@@ -137,8 +137,8 @@ convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
800,
900,
250,
- 330, /* FIXME: Is 333 better/valid? */
- 660, /* FIXME: Is 667 better/valid? */
+ 330,
+ 660,
750,
0, /* undefined */
0 /* undefined */
@@ -167,7 +167,7 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
unsigned int dqs_cfg;
unsigned char twr_clk, twtr_clk, twr_auto_clk;
unsigned int tCKmin_ps, tCKmax_ps;
- unsigned int max_data_rate, effective_data_rate;
+ unsigned int max_data_rate;
unsigned int busfreq;
unsigned sdram_cfg_1;
unsigned int memsize;
@@ -187,6 +187,7 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
unsigned char d_init;
unsigned int law_size;
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+ unsigned int tCycle_ps, modfreq;
if (ddr_num == 1)
ddr = &immap->im_ddr1;
@@ -288,7 +289,7 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
}
#ifdef CONFIG_DDR_INTERLEAVE
-#ifdef CONFIG_MPC8641HPCN
+
if (dimm_num != 1) {
printf("For interleaving memory on HPCN, need to use DIMM 1 for DDR Controller %d !\n", ddr_num);
return 0;
@@ -340,8 +341,6 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
rank_density /= 2;
}
}
-#endif /* CONFIG_MPC8641HPCN */
-
#else /* CONFIG_DDR_INTERLEAVE */
if (dimm_num == 1) {
@@ -468,81 +467,42 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
*/
busfreq = get_bus_freq(0) / 1000000; /* MHz */
- effective_data_rate = max_data_rate;
- if (busfreq < 90) {
- /* DDR rate out-of-range */
- puts("DDR: platform frequency is not fit for DDR rate\n");
+ if ((spd.mem_type == SPD_MEMTYPE_DDR2) && (busfreq < 266)) {
+ printf("DDR: platform frequency too low for correct DDR2 controller operation\n");
return 0;
-
- } else if (90 <= busfreq && busfreq < 230 && max_data_rate >= 230) {
- /*
- * busfreq 90~230 range, treated as DDR 200.
- */
- effective_data_rate = 200;
- if (spd.clk_cycle3 == 0xa0) /* 10 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0xa0)
- caslat--;
-
- } else if (230 <= busfreq && busfreq < 280 && max_data_rate >= 280) {
- /*
- * busfreq 230~280 range, treated as DDR 266.
- */
- effective_data_rate = 266;
- if (spd.clk_cycle3 == 0x75) /* 7.5 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x75)
- caslat--;
-
- } else if (280 <= busfreq && busfreq < 350 && max_data_rate >= 350) {
- /*
- * busfreq 280~350 range, treated as DDR 333.
- */
- effective_data_rate = 333;
- if (spd.clk_cycle3 == 0x60) /* 6.0 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x60)
- caslat--;
-
- } else if (350 <= busfreq && busfreq < 460 && max_data_rate >= 460) {
- /*
- * busfreq 350~460 range, treated as DDR 400.
- */
- effective_data_rate = 400;
- if (spd.clk_cycle3 == 0x50) /* 5.0 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x50)
- caslat--;
-
- } else if (460 <= busfreq && busfreq < 560 && max_data_rate >= 560) {
- /*
- * busfreq 460~560 range, treated as DDR 533.
- */
- effective_data_rate = 533;
- if (spd.clk_cycle3 == 0x3D) /* 3.75 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x3D)
- caslat--;
-
- } else if (560 <= busfreq && busfreq < 700 && max_data_rate >= 700) {
- /*
- * busfreq 560~700 range, treated as DDR 667.
- */
- effective_data_rate = 667;
- if (spd.clk_cycle3 == 0x30) /* 3.0 ns */
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x30)
- caslat--;
-
- } else if (700 <= busfreq) {
- /*
- * DDR rate out-of-range
- */
- printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n",
- busfreq, max_data_rate);
+ } else if (busfreq < 90) {
+ printf("DDR: platform frequency too low for correct DDR1 operation\n");
return 0;
}
+ if ((busfreq <= modfreq) && (spd.cas_lat & (1 << (caslat - 2)))) {
+ caslat -= 2;
+ } else {
+ tCycle_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle2);
+ modfreq = 2 * 1000 * 1000 / tCycle_ps;
+ if ((busfreq <= modfreq) && (spd.cas_lat & (1 << (caslat - 1))))
+ caslat -= 1;
+ else if (busfreq > max_data_rate) {
+ printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n",
+ busfreq, max_data_rate);
+ return 0;
+ }
+ }
+
+ /*
+ * Empirically set ~MCAS-to-preamble override for DDR 2.
+ * Your milage will vary.
+ */
+ cpo = 0;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ if (busfreq <= 333) {
+ cpo = 0x7;
+ } else if (busfreq <= 400) {
+ cpo = 0x9;
+ } else {
+ cpo = 0xa;
+ }
+ }
/*
* Convert caslat clocks to DDR controller value.
@@ -554,7 +514,6 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
caslat_ctrl = (2 * caslat - 1) & 0x0f;
}
- debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
caslat, caslat_ctrl);
@@ -676,7 +635,7 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
&& (odt_wr_cfg || odt_rd_cfg)
&& (caslat < 4)) {
add_lat = 4 - caslat;
- if (add_lat > trcd_clk) {
+ if (add_lat >= trcd_clk) {
add_lat = trcd_clk - 1;
}
}
@@ -717,22 +676,6 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
four_act = picos_to_clk(37500); /* By the book. 1k pages? */
}
- /*
- * Empirically set ~MCAS-to-preamble override for DDR 2.
- * Your milage will vary.
- */
- cpo = 0;
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- if (effective_data_rate == 266 || effective_data_rate == 333) {
- cpo = 0x7; /* READ_LAT + 5/4 */
- } else if (effective_data_rate == 400) {
- cpo = 0x9; /* READ_LAT + 7/4 */
- } else {
- /* Pure speculation */
- cpo = 0xb;
- }
- }
-
ddr->timing_cfg_2 = (0
| ((add_lat & 0x7) << 28) /* ADD_LAT */
| ((cpo & 0x1f) << 23) /* CPO */
generated by cgit v1.1 at 2024-11-15 02:39:46 +0000