diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/mpc85xx/cpu.c | 7 | ||||
| -rw-r--r-- | cpu/mpc85xx/fdt.c | 15 | ||||
| -rw-r--r-- | cpu/mpc85xx/speed.c | 10 |
3 files changed, 24 insertions, 8 deletions
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 15ba7f1..a34e251 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -90,6 +90,7 @@ int checkcpu (void) #else u32 ddr_ratio = 0; #endif + int i; svr = get_svr(); ver = SVR_SOC_VER(svr); @@ -141,8 +142,10 @@ int checkcpu (void) get_sys_info(&sysinfo); - puts("Clock Configuration:\n"); - printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor)); + puts("Clock Configuration:\n "); + for (i = 0; i < CONFIG_NUM_CPUS; i++) + printf("CPU%d:%-4s MHz, ", + i,strmhz(buf1, sysinfo.freqProcessor[i])); printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); switch (ddr_ratio) { diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 69fab99..1fae47c 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -213,6 +213,10 @@ void fdt_add_enet_stashing(void *fdt) void ft_cpu_setup(void *blob, bd_t *bd) { + int off; + int val; + sys_info_t sysinfo; + /* delete crypto node if not on an E-processor */ if (!IS_E_PROCESSOR(get_svr())) fdt_fixup_crypto_node(blob, 0); @@ -228,8 +232,15 @@ void ft_cpu_setup(void *blob, bd_t *bd) "timebase-frequency", bd->bi_busfreq / 8, 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); + get_sys_info(&sysinfo); + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); + val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); + fdt_setprop(blob, off, "clock-frequency", &val, 4); + off = fdt_node_offset_by_prop_value(blob, off, "device_type", + "cpu", 4); + } do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 0d55228..b0f47e0 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -39,17 +39,19 @@ void get_sys_info (sys_info_t * sysInfo) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; uint lcrr_div; + int i; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; - e500_ratio = (gur->porpllsr) & 0x003f0000; - e500_ratio >>= 16; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ half_freqSystemBus = sysInfo->freqSystemBus/2; - sysInfo->freqProcessor = e500_ratio*half_freqSystemBus; + for (i = 0; i < CONFIG_NUM_CPUS; i++) { + e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; + sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; + } /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ sysInfo->freqDDRBus = sysInfo->freqSystemBus; @@ -105,7 +107,7 @@ int get_clocks (void) dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); - gd->cpu_clk = sys_info.freqProcessor; + gd->cpu_clk = sys_info.freqProcessor[0]; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; gd->lbc_clk = sys_info.freqLocalBus; |