diff options
Diffstat (limited to 'cpu/pxa')
| -rw-r--r-- | cpu/pxa/cpu.c | 1 | ||||
| -rw-r--r-- | cpu/pxa/start.S | 86 |
2 files changed, 40 insertions, 47 deletions
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c index 445ba18..b33d674 100644 --- a/cpu/pxa/cpu.c +++ b/cpu/pxa/cpu.c @@ -162,4 +162,3 @@ void set_GPIO_mode(int gpio_mode) GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); } #endif /* CONFIG_CPU_MONAHANS */ - diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S index 7e5a1ee..9541c9b 100644 --- a/cpu/pxa/start.S +++ b/cpu/pxa/start.S @@ -6,8 +6,8 @@ * Copyright (C) 2000 Wolfgang Denk <wd@denx.de> * Copyright (C) 2001 Alex Zuepke <azu@sysgo.de> * Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net> - * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> + * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> + * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> * * See file CREDITS for list of people who contributed to this * project. @@ -117,13 +117,13 @@ reset: relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup ldr r2, _armboot_start ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ copy_loop: ldmia r0!, {r3-r10} /* copy from source address [r0] */ @@ -135,19 +135,19 @@ copy_loop: /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ - sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ + sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif sub sp, r0, #12 /* leave 3 words for abort-stack */ clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 ble clbss_l @@ -173,8 +173,8 @@ _start_armboot: .word start_armboot #undef OWER #undef OIER #endif - -/* Interrupt-Controller base address */ + +/* Interrupt-Controller base address */ IC_BASE: .word 0x40d00000 #define ICMR 0x04 @@ -189,7 +189,7 @@ OSTIMER_BASE: .word 0x40a00000 #define OWER 0x18 #define OIER 0x1C -/* Clock Manager Registers */ +/* Clock Manager Registers */ #ifdef CFG_CPUSPEED CC_BASE: .word 0x41300000 #define CCCR 0x00 @@ -197,7 +197,6 @@ cpuspeed: .word CFG_CPUSPEED #else #error "You have to define CFG_CPUSPEED!!" #endif - /* takes care the CP15 update has taken place */ .macro CPWAIT reg @@ -206,40 +205,36 @@ cpuspeed: .word CFG_CPUSPEED sub pc,pc,#4 .endm - cpu_init_crit: /* mask all IRQs */ #ifndef CONFIG_CPU_MONAHANS - ldr r0, IC_BASE mov r1, #0x00 str r1, [r0, #ICMR] #else /* Step 1 - Enable CP6 permission */ - mrc p15, 0, r1, c15, c1, 0 @ read CPAR - orr r1, r1, #0x40 - mcr p15, 0, r1, c15, c1, 0 - CPWAIT r1 + mrc p15, 0, r1, c15, c1, 0 @ read CPAR + orr r1, r1, #0x40 + mcr p15, 0, r1, c15, c1, 0 + CPWAIT r1 - /* Step 2 - Mask ICMR & ICMR2 */ - mov r1, #0 - mcr p6, 0, r1, c1, c0, 0 @ ICMR - mcr p6, 0, r1, c7, c0, 0 @ ICMR2 + /* Step 2 - Mask ICMR & ICMR2 */ + mov r1, #0 + mcr p6, 0, r1, c1, c0, 0 @ ICMR + mcr p6, 0, r1, c7, c0, 0 @ ICMR2 /* turn off all clocks but the ones we will definitly require */ - ldr r1, =CKENA - ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC) - str r2, [r1] - ldr r1, =CKENB - ldr r2, =(CKENB_6_IRQ) - str r2, [r1] - + ldr r1, =CKENA + ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC) + str r2, [r1] + ldr r1, =CKENB + ldr r2, =(CKENB_6_IRQ) + str r2, [r1] #endif #ifndef CONFIG_CPU_MONAHANS #ifdef CFG_CPUSPEED - /* set clock speed tbd@mk: required for monahans? */ ldr r0, CC_BASE ldr r1, cpuspeed @@ -248,10 +243,9 @@ cpu_init_crit: mcr p14, 0, r0, c6, c0, 0 setspeed_done: - + #endif /* CFG_CPUSPEED */ #endif /* CONFIG_CPU_MONAHANS */ - /* * before relocating, we have to setup RAM timing @@ -263,7 +257,7 @@ setspeed_done: mov lr, ip /* Memory interfaces are working. Disable MMU and enable I-cache. */ - /* mk: hmm, this is not in the monahans docs, leave it now but + /* mk: hmm, this is not in the monahans docs, leave it now but * check here if it doesn't work :-) */ ldr r0, =0x2001 /* enable access to all coproc. */ @@ -330,7 +324,7 @@ setspeed_done: ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) - sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -457,17 +451,17 @@ fiq: #endif /****************************************************************************/ -/* */ +/* */ /* Reset function: the PXA250 doesn't have a reset function, so we have to */ -/* perform a watchdog timeout for a soft reset. */ -/* */ +/* perform a watchdog timeout for a soft reset. */ +/* */ /****************************************************************************/ .align 5 .globl reset_cpu - /* FIXME: this code is PXA250 specific. How is this handled on */ - /* other XScale processors? */ + /* FIXME: this code is PXA250 specific. How is this handled on */ + /* other XScale processors? */ reset_cpu: @@ -475,13 +469,13 @@ reset_cpu: ldr r0, OSTIMER_BASE ldr r1, [r0, #OWER] - orr r1, r1, #0x0001 /* bit0: WME */ + orr r1, r1, #0x0001 /* bit0: WME */ str r1, [r0, #OWER] /* OS timer does only wrap every 1165 seconds, so we have to set */ - /* the match register as well. */ + /* the match register as well. */ - ldr r1, [r0, #OSCR] /* read OS timer */ + ldr r1, [r0, #OSCR] /* read OS timer */ add r1, r1, #0x800 /* let OSMR3 match after */ add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ str r1, [r0, #OSMR3] |