summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/405gp_pci.c3
-rw-r--r--cpu/ppc4xx/4xx_enet.c184
-rw-r--r--cpu/ppc4xx/Makefile2
-rw-r--r--cpu/ppc4xx/cpu.c109
-rw-r--r--cpu/ppc4xx/interrupts.c57
-rw-r--r--cpu/ppc4xx/miiphy.c14
-rw-r--r--cpu/ppc4xx/ndfc.c173
-rw-r--r--cpu/ppc4xx/serial.c263
-rw-r--r--cpu/ppc4xx/speed.c3
-rw-r--r--cpu/ppc4xx/start.S128
-rw-r--r--cpu/ppc4xx/usb_ohci.c8
-rw-r--r--cpu/ppc4xx/usbdev.c20
-rw-r--r--cpu/ppc4xx/vecnum.h89
13 files changed, 787 insertions, 266 deletions
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 0b0686b..03128d3 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -555,7 +555,8 @@ void pci_440_init (struct pci_controller *hose)
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
hose->last_busno = pci_hose_scan(hose);
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index fab65af..5b1c17c 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -130,7 +130,17 @@
#define BI_PHYMODE_NONE 0
#define BI_PHYMODE_ZMII 1
#define BI_PHYMODE_RGMII 2
+#define BI_PHYMODE_GMII 3
+#define BI_PHYMODE_RTBI 4
+#define BI_PHYMODE_TBI 5
+#if defined (CONFIG_440EPX)
+#define BI_PHYMODE_SMII 6
+#define BI_PHYMODE_MII 7
+#endif
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
+#endif
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
@@ -181,7 +191,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long mfr;
#endif
@@ -205,19 +215,19 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
}
/* EMAC RESET */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -317,10 +327,50 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
out32 (RGMII_FER, rmiifer);
return ((int)pfc1);
-
}
#endif /* CONFIG_440_GX */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ unsigned long zmiifer=0x0;
+
+ /*
+ * Right now only 2*RGMII is supported. Please extend when needed.
+ * sr - 2006-08-29
+ */
+ switch (1) {
+ case 0:
+ /* 1 x GMII port */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000037);
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case 1:
+ /* 2 x RGMII ports */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000055);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ break;
+ case 2:
+ /* 2 x SMII ports */
+
+ break;
+ default:
+ break;
+ }
+
+ /* Ensure we setup mdio for this devnum and ONLY this devnum */
+ zmiifer = in32 (ZMII_FER);
+ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
+ out32 (ZMII_FER, zmiifer);
+
+ return ((int)0x0);
+}
+#endif /* CONFIG_440EPX */
+
static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
int i, j;
@@ -332,13 +382,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
sys_info_t sysinfo;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
@@ -352,7 +405,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
return -1;
}
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
@@ -407,7 +462,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
-#elif defined(CONFIG_440GX)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#elif defined(CONFIG_440GP)
/* set RMII mode */
@@ -429,10 +484,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -444,15 +499,19 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
udelay (1000);
failsafe--;
}
+ if (failsafe <= 0)
+ printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@@ -502,15 +561,39 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
* otherwise, just check the speeds & feeds
*/
if (hw_p->first_init == 0) {
+#if defined(CONFIG_88E1111_CLK_DELAY)
+ /*
+ * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
+ * the "RGMII transmit timing control" and "RGMII receive
+ * timing control" bits set, so that Gbit communication works
+ * without problems.
+ * Also set the "Transmitter disable" to 1 to enable the
+ * transmitter.
+ * After setting these bits a soft-reset must occur for this
+ * change to become active.
+ */
+ miiphy_read (dev->name, reg, 0x14, &reg_short);
+ reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
+ miiphy_write (dev->name, reg, 0x14, reg_short);
+#endif
+#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+ miiphy_write (dev->name, reg, 0x14, 0x0ce3);
+ miiphy_write (dev->name, reg, 0x18, 0x4101);
+ miiphy_write (dev->name, reg, 0x09, 0x0e00);
+ miiphy_write (dev->name, reg, 0x04, 0x01e1);
+#endif
miiphy_reset (dev->name, reg);
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
* for RGMII mode.
*/
- if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) {
+ if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) {
#if defined(CONFIG_CIS8201_SHORT_ETCH)
miiphy_write (dev->name, reg, 23, 0x1300);
#else
@@ -580,7 +663,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -603,15 +687,34 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
else if (speed == 100)
reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
- else
+ else if (speed == 10)
reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
-
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
out32 (RGMII_SSR, reg);
}
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ if (speed == 1000)
+ reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 100)
+ reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 10)
+ reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
+ out32 (RGMII_SSR, reg);
+#endif
+
/* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@@ -795,8 +898,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long pfc1;
+
mfsdr (sdr_pfc1, pfc1);
pfc1 |= SDR0_PFC1_EM_1000;
mtsdr (sdr_pfc1, pfc1);
@@ -942,6 +1047,14 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
#define UIC0SR uic0sr
#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define UICMSR_ETHX uic0msr
+#define UICSR_ETHX uic0sr
+#else
+#define UICMSR_ETHX uic1msr
+#define UICSR_ETHX uic1sr
+#endif
+
int enetInt (struct eth_device *dev)
{
int serviced;
@@ -950,6 +1063,7 @@ int enetInt (struct eth_device *dev)
unsigned long emac_isr = 0;
unsigned long mal_rx_eob;
unsigned long my_uic0msr, my_uic1msr;
+ unsigned long my_uicmsr_ethx;
#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
@@ -977,8 +1091,11 @@ int enetInt (struct eth_device *dev)
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
+ my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
+ && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
/* not for us */
return (rc);
}
@@ -997,8 +1114,7 @@ int enetInt (struct eth_device *dev)
mal_isr = mfdcr (malesr);
/* look for mal error */
if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic0msr,
- MAL_UIC_DEF, MAL_UIC_ERR);
+ mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
serviced = 1;
rc = 0;
}
@@ -1006,7 +1122,7 @@ int enetInt (struct eth_device *dev)
/* port by port dispatch of emac interrupts */
if (hw_p->devnum == 0) {
- if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1017,14 +1133,15 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
return (rc); /* we had errors so get out */
}
}
#if !defined(CONFIG_440SP)
if (hw_p->devnum == 1) {
- if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1035,7 +1152,8 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
return (rc); /* we had errors so get out */
}
}
@@ -1102,10 +1220,10 @@ int enetInt (struct eth_device *dev)
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) {
case 0:
- mtdcr (uic1sr, UIC_ETH0);
+ mtdcr (UICSR_ETHX, UIC_ETH0);
break;
case 1:
- mtdcr (uic1sr, UIC_ETH1);
+ mtdcr (UICSR_ETHX, UIC_ETH1);
break;
#if defined (CONFIG_440GX)
case 2:
@@ -1512,7 +1630,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 93416b5..16dc8d6 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -30,7 +30,7 @@ SOBJS = dcr.o
COBJS = 405gp_pci.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
- miiphy.o sdram.o serial.o \
+ miiphy.o ndfc.o sdram.o serial.o \
spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
440spe_pcie.o
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index bc51fbf..94478db 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,14 +41,15 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define PCI_ASYNC
@@ -58,7 +59,8 @@ int pci_async_enabled(void)
return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -82,9 +84,10 @@ int pci_arbiter_enabled(void)
return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -93,8 +96,10 @@ int pci_arbiter_enabled(void)
}
#endif
-#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define I2C_BOOTROM
@@ -102,17 +107,75 @@ int i2c_bootrom_enabled(void)
{
#if defined(CONFIG_405EP)
return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#else
unsigned long val;
mfsdr(sdr_sdcs, val);
return (val & SDR0_SDCS_SDD);
#endif
}
+
+#if defined(CONFIG_440GX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (16 bits)",
+ "EBC (8 bits)",
+ "EBC (32 bits)",
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "Reserved",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PINSTP_SHIFT 30
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "NAND (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(SDR0_PINSTP_SHIFT)
+static int bootstrap_option(void)
+{
+ unsigned long val;
+
+ mfsdr(sdr_pinstp, val);
+ return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT);
+}
+#endif /* SDR0_PINSTP_SHIFT */
#endif
@@ -244,6 +307,22 @@ int checkcpu (void)
#endif /* CONFIG_440GR */
#endif /* CONFIG_440 */
+ case PVR_440EPX1_RA:
+ puts("EPx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440EPX2_RA:
+ puts("EPx Rev. A - No Security/Kasumi support");
+ break;
+
+ case PVR_440GRX1_RA:
+ puts("GRx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440GRX2_RA:
+ puts("GRx Rev. A - No Security/Kasumi support");
+ break;
+
case PVR_440SP_RA:
puts("SP Rev. A");
break;
@@ -272,6 +351,10 @@ int checkcpu (void)
#if defined(I2C_BOOTROM)
printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#if defined(SDR0_PINSTP_SHIFT)
+ printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
+ printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
+#endif
#endif
#if defined(CONFIG_PCI)
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 886f405..c5a9f02 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -57,12 +57,13 @@ static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
void uic2_interrupt( void * parms); /* UIC2 handler */
#endif /* CONFIG_440GX CONFIG_440SPE */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs3[32]; /* For UIC3 */
void uic3_interrupt( void * parms); /* UIC3 handler */
#endif /* CONFIG_440SPE */
@@ -119,12 +120,13 @@ int interrupt_init_cpu (unsigned *decrementer_count)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
#endif /* CONFIG_440GX */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs3[vec].handler = NULL;
irq_vecs3[vec].arg = NULL;
irq_vecs3[vec].count = 0;
@@ -230,6 +232,32 @@ void external_interrupt(struct pt_regs *regs)
} /* external_interrupt CONFIG_440GX */
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void external_interrupt(struct pt_regs *regs)
+{
+ ulong uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ /* 440 SPe uses base uic register */
+ uic_msr = mfdcr(uic0msr);
+
+ if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
+ uic1_interrupt(0);
+
+ if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
+ uic2_interrupt(0);
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic0_interrupt(0);
+
+ mtdcr(uic0sr, uic_msr);
+
+ return;
+
+} /* external_interrupt CONFIG_440EPX & CONFIG_440GRX */
+
#elif defined(CONFIG_440SPE)
void external_interrupt(struct pt_regs *regs)
{
@@ -303,7 +331,8 @@ void external_interrupt(struct pt_regs *regs)
}
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
@@ -394,7 +423,8 @@ void uic1_interrupt( void * parms)
}
#endif /* defined(CONFIG_440) */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC2 interrupt */
void uic2_interrupt( void * parms)
{
@@ -496,7 +526,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
@@ -523,7 +554,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
irqa[i].arg = arg;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
@@ -546,7 +578,8 @@ void irq_free_handler (int vec)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
@@ -567,7 +600,8 @@ void irq_free_handler (int vec)
#endif
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
@@ -635,7 +669,8 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("\n");
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index aa580ed..6b98025 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -173,7 +173,8 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
#else
@@ -183,7 +184,9 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
@@ -244,7 +247,8 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
#else
@@ -254,7 +258,9 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
new file mode 100644
index 0000000..e4ab326
--- /dev/null
+++ b/cpu/ppc4xx/ndfc.c
@@ -0,0 +1,173 @@
+/*
+ * Overview:
+ * Platform independend driver for NDFC (NanD Flash Controller)
+ * integrated into EP440 cores
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on original work by
+ * Thomas Gleixner
+ * Copyright 2006 IBM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
+
+#include <nand.h>
+#include <linux/mtd/ndfc.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+static u8 hwctl = 0;
+
+static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ hwctl |= 0x1;
+ break;
+
+ case NAND_CTL_CLRCLE:
+ hwctl &= ~0x1;
+ break;
+
+ case NAND_CTL_SETALE:
+ hwctl |= 0x2;
+ break;
+
+ case NAND_CTL_CLRALE:
+ hwctl &= ~0x2;
+ break;
+ }
+}
+
+static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ if (hwctl & 0x1)
+ out8(base + NDFC_CMD, byte);
+ else if (hwctl & 0x2)
+ out8(base + NDFC_ALE, byte);
+ else
+ out8(base + NDFC_DATA, byte);
+}
+
+static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ return (in8(base + NDFC_DATA));
+}
+
+static int ndfc_dev_ready(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
+ ;
+
+ return 1;
+}
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * Don't use these speedup functions in NAND boot image, since the image
+ * has to fit into 4kByte.
+ */
+
+/*
+ * Speedups for buffer read/write/verify
+ *
+ * NDFC allows 32bit read/write of data. So we can speed up the buffer
+ * functions. No further checking, as nand_base will always read/write
+ * page aligned.
+ */
+static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ *p++ = in32(base + NDFC_DATA);
+}
+
+static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ out32(base + NDFC_DATA, *p++);
+}
+
+static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ if (*p++ != in32(base + NDFC_DATA))
+ return -1;
+
+ return 0;
+}
+#endif /* #ifndef CONFIG_NAND_SPL */
+
+void board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+
+ nand->hwcontrol = ndfc_hwcontrol;
+ nand->read_byte = ndfc_read_byte;
+ nand->write_byte = ndfc_write_byte;
+ nand->dev_ready = ndfc_dev_ready;
+
+#ifndef CONFIG_NAND_SPL
+ nand->write_buf = ndfc_write_buf;
+ nand->read_buf = ndfc_read_buf;
+ nand->verify_buf = ndfc_verify_buf;
+#else
+ /*
+ * Setup EBC (CS0 only right now)
+ */
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ mtebc(pb0cr, CFG_EBC_PB0CR);
+ mtebc(pb0ap, CFG_EBC_PB0AP);
+#endif
+
+ /* Set NandFlash Core Configuration Register */
+ /* Chip select 3, 1col x 2 rows */
+ out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24));
+ out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222);
+}
+
+#endif
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index ad3ca6e..fab0d95 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,10 +264,12 @@ int serial_tstc ()
#endif /* CONFIG_IOP480 */
/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440)
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#else
@@ -279,15 +281,34 @@ int serial_tstc ()
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#else
+#if defined(CONFIG_440GP)
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
-#endif /* CONFIG_440GX */
+#define UDIV_SUBTRACT 1
+#define UART0_SDR cntrl0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPe)
+#define UART2_SDR sdr_uart2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx)
+#define UART3_SDR sdr_uart3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@@ -309,21 +330,15 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart1
-#define UART1_SDR sdr_uart0
-#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart0
-#define UART1_SDR sdr_uart1
-#endif /* CONFIG_440GX */
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+#define UART_BASE dev_base
+#else
+#define UART_BASE ACTING_UART0_BASE
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
@@ -419,7 +434,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
*pbdiv = div/udiv;
}
-#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK */
+#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
/*
* Minimal serial functions needed to use one of the SMC ports
@@ -441,23 +456,9 @@ int serial_init(void)
unsigned long tmp;
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mfsdr(UART0_SDR,reg);
- reg &= ~CR0_MASK;
- } else {
- mfsdr(UART1_SDR,reg);
- reg &= ~CR0_MASK;
- }
-#else
- mfsdr(UART0_SDR,reg);
+ MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#endif
-#else
- reg = mfdcr(cntrl0) & ~CR0_MASK;
-#endif /* CONFIG_440GX */
+
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@@ -471,47 +472,34 @@ int serial_init(void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
- reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR,reg);
- } else {
- mtsdr (UART1_SDR,reg);
- }
-#else
- mtsdr (UART0_SDR,reg);
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
#endif
-#else
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (cntrl0, reg);
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
#endif
+
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -564,29 +552,17 @@ int serial_init (void)
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-#endif
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -598,55 +574,10 @@ void serial_setbrg_dev (unsigned long dev_base)
void serial_setbrg (void)
#endif
{
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CFG_EXT_SERIAL_CLOCK
- clk = CFG_EXT_SERIAL_CLOCK;
-#else
- clk = gd->cpu_clk;
-#endif
-
-#ifdef CONFIG_405EP
- udiv = ((mfdcr (cpc0_ucr) & UCR0_MASK) >> UCR0_UDIV_POS);
-#else
- udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
-#endif /* CONFIG_405EP */
-
-#if !defined(CFG_EXT_SERIAL_CLOCK) && \
- ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE) )
- serial_divs (gd->baudrate, &udiv, &bdiv);
- tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR, tmp);
- } else {
- mtsdr (UART1_SDR, tmp);
- }
-#else
- mtsdr (UART0_SDR, tmp);
-#endif
-
-#else
-
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
-
#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init_dev(dev_base);
#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init();
#endif
}
@@ -667,19 +598,11 @@ void serial_putc (const char c)
/* check THRE bit, wait for transmiter available */
for (i = 1; i < 3500; i++) {
-#if defined(CONFIG_SERIAL_MULTI)
- if ((in8 (dev_base + UART_LSR) & 0x20) == 0x20)
-#else
- if ((in8 (ACTING_UART0_BASE + UART_LSR) & 0x20) == 0x20)
-#endif
+ if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20)
break;
udelay (100);
}
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_THR, c); /* put character out */
-#else
- out8 (ACTING_UART0_BASE + UART_THR, c); /* put character out */
-#endif
+ out8 (UART_BASE + UART_THR, c); /* put character out */
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -709,11 +632,7 @@ int serial_getc (void)
#if defined(CONFIG_HW_WATCHDOG)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
#endif /* CONFIG_HW_WATCHDOG */
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -721,22 +640,14 @@ int serial_getc (void)
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1);
}
}
-#if defined(CONFIG_SERIAL_MULTI)
- return (0x000000ff & (int) in8 (dev_base));
-#else
- return (0x000000ff & (int) in8 (ACTING_UART0_BASE));
-#endif
+ return (0x000000ff & (int) in8 (UART_BASE));
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -747,11 +658,7 @@ int serial_tstc (void)
{
unsigned char status;
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
return (1);
}
@@ -759,11 +666,7 @@ int serial_tstc (void)
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index e552c03..2d16a83 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -199,7 +199,8 @@ ulong get_PCI_freq (void)
#elif defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 60ed2d5..5a1ab38 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -117,12 +117,16 @@
.extern ext_bus_cntlr_init
.extern sdram_init
+#ifdef CONFIG_NAND_U_BOOT
+ .extern reconfig_tlb0
+#endif
/*
* Set up GOT: Global Offset Table
*
* Use r14 to access the GOT
*/
+#if !defined(CONFIG_NAND_SPL)
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
@@ -136,6 +140,18 @@
GOT_ENTRY(_end)
GOT_ENTRY(__bss_start)
END_GOT
+#endif /* CONFIG_NAND_SPL */
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * NAND U-Boot image is started from offset 0
+ */
+ .text
+ bl reconfig_tlb0
+ GET_GOT
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
/*
* 440 Startup -- on reset only the top 4k of the effective
@@ -150,11 +166,21 @@
*/
#if defined(CONFIG_440)
+#if !defined(CONFIG_NAND_SPL)
.section .bootpg,"ax"
+#endif
.globl _start_440
/**************************************************************************/
_start_440:
+ /*--------------------------------------------------------------------+
+ | 440EPX BUP Change - Hardware team request
+ +--------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ sync
+ nop
+ nop
+#endif
/*----------------------------------------------------------------+
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
@@ -171,15 +197,19 @@ _start_440:
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */
+ /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440) && !defined(CONFIG_440GP)
mtspr mcsrr0,r0
mtspr mcsrr1,r0
- mfspr r1, mcsr
+ mfspr r1,mcsr
mtspr mcsr,r1
#endif
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
+ mfspr r1,dbcr0
+ andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
+ bne skip_debug_init /* if set, don't clear debug register */
mtspr dbcr0,r0
mtspr dbcr1,r0
mtspr dbcr2,r0
@@ -193,6 +223,7 @@ _start_440:
mfspr r1,dbsr
mtspr dbsr,r1 /* Clear all valid bits */
+skip_debug_init:
/*----------------------------------------------------------------*/
/* CCR0 init */
@@ -352,7 +383,53 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
/*----------------------------------------------------------------*/
/* Continue from 'normal' start */
/*----------------------------------------------------------------*/
-2: bl 3f
+2:
+
+#if defined(CONFIG_NAND_SPL)
+ /*
+ * Enable internal SRAM
+ */
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,isram0_dpc
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr isram0_dpc,r1
+ mfdcr r1,isram0_pmeg
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr isram0_pmeg,r1
+
+ /*
+ * Copy SPL from cache into internal SRAM
+ */
+ li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+ mtctr r4
+ lis r2,CFG_NAND_BOOT_SPL_SRC@h
+ ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+ lis r3,CFG_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+ lwzu r4,4(r2)
+ stwu r4,4(r3)
+ bdnz spl_loop
+
+ /*
+ * Jump to code in RAM
+ */
+ bl 00f
+00: mflr r10
+ lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+ ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+ sub r10,r10,r3
+ addi r10,r10,28
+ mtlr r10
+ blr
+
+start_ram:
+ sync
+ isync
+#endif
+
+ bl 3f
b _start
3: li r0,0
@@ -366,6 +443,7 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
+#ifndef CONFIG_NAND_SPL
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
@@ -379,6 +457,7 @@ version_string:
* location (0x100) is where the CriticalInput Execption should be.
*/
. = EXC_OFF_SYS_RESET
+#endif
.globl _start
_start:
@@ -417,7 +496,8 @@ _start:
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#ifdef CFG_INIT_RAM_DCACHE
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
@@ -433,19 +513,22 @@ _start:
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag
-#else
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#endif /* CFG_INIT_RAM_DCACHE */
+
+ /* 440EP & 440GR are only 440er PPC's without internal SRAM */
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+ /* not all PPC's have internal SRAM usable as L2-cache */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
- mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
- li r2,0x7fff
+ lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
- andis. r1,r1,r2 /* Disable pwr mgmt */
+ and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
@@ -474,11 +557,12 @@ _start:
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr isram0_sb3cr,r1
-#else
+#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
+ mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
#endif
-#endif
+#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
@@ -495,10 +579,14 @@ _start:
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot /* will not return */
+#else
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+#endif
#endif /* CONFIG_440 */
@@ -808,6 +896,7 @@ _start:
/*----------------------------------------------------------------------- */
+#ifndef CONFIG_NAND_SPL
/*****************************************************************************/
.globl _start_of_vectors
_start_of_vectors:
@@ -1013,6 +1102,7 @@ crit_return:
lwz r1,GPR1(r1)
SYNC
rfci
+#endif /* CONFIG_NAND_SPL */
/* Cache functions.
*/
@@ -1254,6 +1344,7 @@ ppcSync:
/*------------------------------------------------------------------------------*/
+#ifndef CONFIG_NAND_SPL
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@@ -1267,7 +1358,9 @@ ppcSync:
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SPE)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
@@ -1482,22 +1575,22 @@ trap_init:
cmplw 0, r7, r8
blt 4b
-#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE)
+#if !defined(CONFIG_440)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r7 /* change MSR */
#else
- bl __440gx_msr_set
- b __440gx_msr_continue
+ bl __440_msr_set
+ b __440_msr_continue
-__440gx_msr_set:
+__440_msr_set:
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtspr srr1,r7
mflr r7
mtspr srr0,r7
rfi
-__440gx_msr_continue:
+__440_msr_continue:
#endif
mtlr r4 /* restore link register */
@@ -1516,6 +1609,7 @@ trap_reloc:
stw r0, 4(r7)
blr
+#endif /* CONFIG_NAND_SPL */
/**************************************************************************/
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index bb57658..ab852c5 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_440EP
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
#else
@@ -1599,7 +1599,11 @@ int usb_lowlevel_init(void)
gohci.disabled = 1;
gohci.sleeping = 0;
gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#if defined(CONFIG_440EP)
+ gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX)
+ gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
+#endif
gohci.flags = 0;
gohci.slot_name = "ppc440";
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 8262c54..6140d2a 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#ifdef CONFIG_440EP
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
#include <usb.h>
#include "usbdev.h"
@@ -186,6 +186,21 @@ int usbInt(void)
return 0;
}
+#if defined(CONFIG_440EPX)
+void usb_dev_init()
+{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
void usb_dev_init()
{
#ifdef USB_2_0_DEVICE
@@ -210,5 +225,6 @@ void usb_dev_init()
irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
NULL);
}
+#endif
-#endif /*CONFIG_440EP */
+#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 93cef02..70e436a 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -31,7 +31,94 @@
#ifndef _VECNUMS_H_
#define _VECNUMS_H_
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440_GRX)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART 0 */
+#define VECNUM_U1 1 /* UART 1 */
+#define VECNUM_IIC0 2 /* IIC */
+#define VECNUM_KRD 3 /* Kasumi Ready for data */
+#define VECNUM_KDA 4 /* Kasumi Data Available */
+#define VECNUM_PCRW 5 /* PCI command register write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_IIC1 7 /* IIC */
+#define VECNUM_SPI 8 /* SPI */
+#define VECNUM_EPCISER 9 /* External PCI SERR */
+#define VECNUM_MTE 10 /* MAL TXEOB */
+#define VECNUM_MRE 11 /* MAL RXEOB */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UD0 16 /* UDMA irq 0 */
+#define VECNUM_UD1 17 /* UDMA irq 1 */
+#define VECNUM_UD2 18 /* UDMA irq 2 */
+#define VECNUM_UD3 19 /* UDMA irq 3 */
+#define VECNUM_HSB2D 20 /* USB2.0 Device */
+#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
+#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
+#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
+#define VECNUM_EIP94 23 /* Security EIP94 */
+#define VECNUM_ETH0 24 /* Emac 0 */
+#define VECNUM_ETH1 25 /* Emac 1 */
+#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
+#define VECNUM_EIR4 27 /* External interrupt 4 */
+#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 0) /* MAL SERR */
+#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
+#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
+#define VECNUM_U2 (32 + 3) /* UART 2 */
+#define VECNUM_U3 (32 + 4) /* UART 3 */
+#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
+#define VECNUM_NDFC (32 + 6) /* NDFC */
+#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
+#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
+#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
+#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
+#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
+#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
+#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
+#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
+#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
+#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
+#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
+#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
+#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
+#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
+#define VECNUM_SRE (32 + 24) /* Serial ROM error */
+#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
+#define VECNUM_RSVD0 (32 + 26) /* Reserved */
+#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
+#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
+#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
+#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
+#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
+
+#define VECNUM_TXDE VECNUM_MTDE
+#define VECNUM_RXDE VECNUM_MRDE
+
+/* UIC 2 */
+#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */
+#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */
+#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */
+#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */
+#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */
+#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */
+#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */
+#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */
+#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */
+#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */
+
+#elif defined(CONFIG_440SPE)
+
/* UIC 0 */
#define VECNUM_U0 0 /* UART0 */
#define VECNUM_U1 1 /* UART1 */
generated by cgit v1.1 at 2024-12-27 05:39:24 +0000