summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/40x_spd_sdram.c464
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c1248
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c3174
-rw-r--r--cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c1251
-rw-r--r--cpu/ppc4xx/4xx_pci.c873
-rw-r--r--cpu/ppc4xx/4xx_pcie.c1298
-rw-r--r--cpu/ppc4xx/4xx_uart.c878
-rw-r--r--cpu/ppc4xx/Makefile92
-rw-r--r--cpu/ppc4xx/bedbug_405.c308
-rw-r--r--cpu/ppc4xx/cache.S235
-rw-r--r--cpu/ppc4xx/cmd_chip_config.c148
-rw-r--r--cpu/ppc4xx/commproc.c77
-rw-r--r--cpu/ppc4xx/config.mk37
-rw-r--r--cpu/ppc4xx/cpu.c754
-rw-r--r--cpu/ppc4xx/cpu_init.c456
-rw-r--r--cpu/ppc4xx/dcr.S198
-rw-r--r--cpu/ppc4xx/denali_data_eye.c389
-rw-r--r--cpu/ppc4xx/denali_spd_ddr2.c1256
-rw-r--r--cpu/ppc4xx/ecc.c185
-rw-r--r--cpu/ppc4xx/ecc.h75
-rw-r--r--cpu/ppc4xx/fdt.c177
-rw-r--r--cpu/ppc4xx/gpio.c255
-rw-r--r--cpu/ppc4xx/interrupts.c216
-rw-r--r--cpu/ppc4xx/iop480_uart.c237
-rw-r--r--cpu/ppc4xx/kgdb.S78
-rw-r--r--cpu/ppc4xx/miiphy.c366
-rw-r--r--cpu/ppc4xx/reginfo.c370
-rw-r--r--cpu/ppc4xx/resetvec.S12
-rw-r--r--cpu/ppc4xx/sdram.c468
-rw-r--r--cpu/ppc4xx/sdram.h76
-rw-r--r--cpu/ppc4xx/speed.c1177
-rw-r--r--cpu/ppc4xx/start.S2170
-rw-r--r--cpu/ppc4xx/tlb.c352
-rw-r--r--cpu/ppc4xx/traps.c409
-rw-r--r--cpu/ppc4xx/u-boot.lds169
-rw-r--r--cpu/ppc4xx/uic.c180
-rw-r--r--cpu/ppc4xx/usb.c66
-rw-r--r--cpu/ppc4xx/usb_ohci.c1648
-rw-r--r--cpu/ppc4xx/usb_ohci.h410
-rw-r--r--cpu/ppc4xx/usbdev.c230
-rw-r--r--cpu/ppc4xx/usbdev.h31
-rw-r--r--cpu/ppc4xx/xilinx_irq.c100
42 files changed, 0 insertions, 22593 deletions
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
deleted file mode 100644
index 5e6dbe3..0000000
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * cpu/ppc4xx/40x_spd_sdram.c
- * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
- * SDRAM controller. Those are all current 405 PPC's.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
-
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
-
-/* SDRAM0_CFG enable macro */
-#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
-
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
-
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
-
-#ifdef CONFIG_SPDDRAM_SILENT
-# define SPD_ERR(x) do { return 0; } while (0)
-#else
-# define SPD_ERR(x) do { printf(x); return(0); } while (0)
-#endif
-
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/* function prototypes */
-int spd_read(uint addr);
-
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * Input: null for default I2C spd functions or a pointer to a custom function
- * returning spd_data.
- */
-
-long int spd_sdram(int(read_spd)(uint addr))
-{
- int tmp,row,col;
- int total_size,bank_size,bank_code;
- int ecc_on;
- int mode;
- int bank_cnt;
-
- int sdram0_pmit=0x07c00000;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0 = -1;
- int sdram0_besr1 = -1;
- int sdram0_eccesr = -1;
-#endif
- int sdram0_ecccfg;
-
- int sdram0_rtr=0;
- int sdram0_tr=0;
-
- int sdram0_b0cr;
- int sdram0_b1cr;
- int sdram0_b2cr;
- int sdram0_b3cr;
-
- int sdram0_cfg=0;
-
- int t_rp;
- int t_rcd;
- int t_ras;
- int t_rc;
- int min_cas;
-
- PPC4xx_SYS_INFO sys_info;
- unsigned long bus_period_x_10;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- if (read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- }
-
- /* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04) {
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
- /* ------------------------------------------------------------------
- * configure memory timing register
- *
- * data from DIMM:
- * 27 IN Row Precharge Time ( t RP)
- * 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- * -------------------------------------------------------------------*/
-
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
-
- tmp = read_spd(127) & 0x6;
- if (tmp == 0x02) { /* only cas = 2 supported */
- min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
- min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
- min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
- } else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
- }
-
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
-
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
- if (tmp < 1)
- tmp = 1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
- if (tmp < 0)
- tmp = 0;
- if (tmp > 6)
- tmp = 6;
- sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-
-
- /*------------------------------------------------------------------
- * configure RTR register
- * -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch (tmp) {
- case 0x00:
- tmp = 15625;
- break;
- case 0x01:
- tmp = 15625 / 4;
- break;
- case 0x02:
- tmp = 15625 / 2;
- break;
- case 0x03:
- tmp = 15625 * 2;
- break;
- case 0x04:
- tmp = 15625 * 4;
- break;
- case 0x05:
- tmp = 15625 * 8;
- break;
- default:
- SPD_ERR("SDRAM - Bad refresh period \n");
- }
- /* convert from nsec to bus cycles */
- tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-
- /*------------------------------------------------------------------
- * determine the number of banks used
- * -------------------------------------------------------------------*/
- /* byte 7:6 is module data width */
- if (read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
- tmp = read_spd(6);
- if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
- else if (tmp < 64)
- bank_cnt = 1; /* one bank per sdram side */
- else if (tmp < 73)
- bank_cnt = 2; /* need two banks per side */
- else if (tmp < 161)
- bank_cnt = 4; /* need four banks per side */
- else
- SPD_ERR("SDRAM - unsupported module width\n");
-
- /* byte 5 is the module row count (refered to as dimm "sides") */
- tmp = read_spd(5);
- if (tmp == 1)
- ;
- else if (tmp==2)
- bank_cnt *= 2;
- else if (tmp==4)
- bank_cnt *= 4;
- else
- bank_cnt = 8; /* 8 is an error code */
-
- if (bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
-
- /* now check for ECC ability of module. We only support ECC
- * on 32 bit wide devices with 8 bit ECC.
- */
- if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
- sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- } else {
- sdram0_ecccfg = 0;
- ecc_on = 0;
- }
-
- /*------------------------------------------------------------------
- * calculate total size
- * -------------------------------------------------------------------*/
- /* calculate total size and do sanity check */
- tmp = read_spd(31);
- total_size = 1 << 22; /* total_size = 4MB */
- /* now multiply 4M by the smallest device row density */
- /* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)) {
- total_size = total_size << 1;
- tmp = tmp >> 1;
- }
- total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-
- /*------------------------------------------------------------------
- * map rows * cols * banks to a mode
- * -------------------------------------------------------------------*/
-
- switch (row) {
- case 11:
- switch (col) {
- case 8:
- mode=4; /* mode 5 */
- break;
- case 9:
- case 10:
- mode=0; /* mode 1 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 12:
- switch (col) {
- case 8:
- mode=3; /* mode 4 */
- break;
- case 9:
- case 10:
- mode=1; /* mode 2 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 13:
- switch (col) {
- case 8:
- mode=5; /* mode 6 */
- break;
- case 9:
- case 10:
- if (read_spd(17) == 2)
- mode = 6; /* mode 7 */
- else
- mode = 2; /* mode 3 */
- break;
- case 11:
- mode = 2; /* mode 3 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
-
- /*------------------------------------------------------------------
- * using the calculated values, compute the bank
- * config register values.
- * -------------------------------------------------------------------*/
- sdram0_b1cr = 0;
- sdram0_b2cr = 0;
- sdram0_b3cr = 0;
-
- /* compute the size of each bank */
- bank_size = total_size / bank_cnt;
- /* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
- bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
- bank_code++; /* and stores result in bank_code */
- tmp = tmp >> 1;
- } /* bank_code is now log2(bank_size) */
- bank_code -= 22; /* subtract 22 to get the code */
-
- tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size * 0) | tmp;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- if (bank_cnt > 1)
- sdram0_b2cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- sdram0_b1cr = (bank_size * 2) | tmp;
- if (bank_cnt > 3)
- sdram0_b3cr = (bank_size * 3) | tmp;
-#else
- /* PPC405EP chip only supports two SDRAM banks */
- if (bank_cnt > 1)
- sdram0_b1cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- total_size = 2 * bank_size;
-#endif
-
- /*
- * enable sdram controller DCE=1
- * enable burst read prefetch to 32 bytes BRPF=2
- * leave other functions off
- */
-
- /*------------------------------------------------------------------
- * now that we've done our calculations, we are ready to
- * program all the registers.
- * -------------------------------------------------------------------*/
-
- /* disable memcontroller so updates work */
- mtsdram(SDRAM0_CFG, 0);
-
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_BESR0, sdram0_besr0);
- mtsdram(SDRAM0_BESR1, sdram0_besr1);
- mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
- mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
-#endif
- mtsdram(SDRAM0_RTR, sdram0_rtr);
- mtsdram(SDRAM0_PMIT, sdram0_pmit);
- mtsdram(SDRAM0_B0CR, sdram0_b0cr);
- mtsdram(SDRAM0_B1CR, sdram0_b1cr);
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_B2CR, sdram0_b2cr);
- mtsdram(SDRAM0_B3CR, sdram0_b3cr);
-#endif
- mtsdram(SDRAM0_TR, sdram0_tr);
-
- /* SDRAM have a power on delay, 500 micro should do */
- udelay(500);
- sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if (ecc_on)
- sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram(SDRAM0_CFG, sdram0_cfg);
-
- return (total_size);
-}
-
-int spd_read(uint addr)
-{
- uchar data[2];
-
- if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
- return (int)data[0];
- else
- return 0;
-}
-
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
deleted file mode 100644
index 6176eab..0000000
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ /dev/null
@@ -1,1248 +0,0 @@
-/*
- * cpu/ppc4xx/44x_spd_ddr.c
- * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
- * DDR controller. Those are 440GP/GX/EP/GR.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-#include <asm/mmu.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR))
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*-----------------------------------------------------------------------------+
- | General Definition
- +-----------------------------------------------------------------------------*/
-#define DEFAULT_SPD_ADDR1 0x53
-#define DEFAULT_SPD_ADDR2 0x52
-#define MAXBANKS 4 /* at most 4 dimm banks */
-#define MAX_SPD_BYTES 256
-#define NUMHALFCYCLES 4
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define MAXBXCR 4
-#define TRUE 1
-#define FALSE 0
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/* bank_parms is used to sort the bank sizes by descending order */
-struct bank_param {
- unsigned long cr;
- unsigned long bank_size_bytes;
-};
-
-typedef struct bank_param BANKPARMS;
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
-extern const unsigned char cfg_simulate_spd_eeprom[128];
-#endif
-
-static unsigned char spd_read(uchar chip, uint addr);
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr1(void);
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * BUG: Don't handle ECC memory
- * BUG: A few values in the TR register is currently hardcoded
- */
-long int spd_sdram(void) {
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
- unsigned long total_size;
- unsigned long cfg0;
- unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*
- * Read the SPD information using I2C interface. Check to see if the
- * DIMM slots are populated.
- */
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the memory type for the dimms plugged.
- */
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the voltage type for the dimms plugged.
- */
- check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG0)
- */
- program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG1)
- */
- program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM refresh register (SDRAM0_RTR)
- */
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM Timing Register 0 (SDRAM0_TR0)
- */
- program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program the BxCR registers to find out total sdram installed
- */
- total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
- num_dimm_banks);
-
-#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
- /* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
-#endif
-
- /*
- * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
- */
- mtsdram(SDRAM0_CLKTR, 0x40000000);
-
- /*
- * delay to ensure 200 usec has elapsed
- */
- udelay(400);
-
- /*
- * enable the memory controller
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
-
- /*
- * wait for SDRAM_CFG0_DC_EN to complete
- */
- while (1) {
- mfsdram(SDRAM0_MCSTS, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
- break;
- }
-
- /*
- * program SDRAM Timing Register 1, adding some delays
- */
- program_tr1();
-
-#ifdef CONFIG_DDR_ECC
- /*
- * If ecc is enabled, initialize the parity bits.
- */
- ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
-#endif
-
- return total_size;
-}
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
- if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
- /*
- * Onboard spd eeprom requested -> simulate values
- */
- return cfg_simulate_spd_eeprom[addr];
- }
-#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
-
- if (i2c_probe(chip) == 0) {
- if (i2c_read(chip, addr, 1, data, 1) == 0) {
- return data[0];
- }
- }
-
- return 0;
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned char dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 7:
- debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
- break;
- default:
- printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
- dimm_num);
- printf("Only DDR SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (voltage_type != 0x04) {
- printf("ERROR: DIMM %lu with unsupported voltage level.\n",
- dimm_num);
- spd_ddr_init_hang ();
- } else {
- debug("DIMM %lu voltage level supported.\n", dimm_num);
- }
- break;
- }
- }
-}
-
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long cfg0;
- unsigned long ecc_enabled;
- unsigned char ecc;
- unsigned char attributes;
- unsigned long data_width;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
-
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(SDRAM0_CFG0, cfg0);
-
- /*
- * clear bits
- */
- cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
- SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
- SDRAM_CFG0_DMWD_MASK |
- SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
-
-
- /*
- * FIXME: assume the DDR SDRAMs in both banks are the same
- */
- ecc_enabled = TRUE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) {
- ecc_enabled = FALSE;
- }
-
- /*
- * program Registered DIMM Enable
- */
- attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
- if ((attributes & 0x02) != 0x00) {
- cfg0 |= SDRAM_CFG0_RDEN;
- }
-
- /*
- * program DDR SDRAM Data Width
- */
- data_width =
- (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
- if (data_width == 64 || data_width == 72) {
- dimm_64bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_64;
- } else if (data_width == 32 || data_width == 40) {
- dimm_32bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_32;
- } else {
- printf("WARNING: DIMM with datawidth of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- spd_ddr_init_hang ();
- }
- break;
- }
- }
-
- /*
- * program Memory Data Error Checking
- */
- if (ecc_enabled == TRUE) {
- cfg0 |= SDRAM_CFG0_MCHK_GEN;
- } else {
- cfg0 |= SDRAM_CFG0_MCHK_NON;
- }
-
- /*
- * program Page Management Unit (0 == enabled)
- */
- cfg0 &= ~SDRAM_CFG0_PMUD;
-
- /*
- * program Memory Controller Options 0
- * Note: DCEN must be enabled after all DDR SDRAM controller
- * configuration registers get initialized.
- */
- mtsdram(SDRAM0_CFG0, cfg0);
-}
-
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long cfg1;
- mfsdram(SDRAM0_CFG1, cfg1);
-
- /*
- * Self-refresh exit, disable PM
- */
- cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
-
- /*
- * program Memory Controller Options 1
- */
- mtsdram(SDRAM0_CFG1, cfg1);
-}
-
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bus_period_x_10;
- unsigned long refresh_rate = 0;
- unsigned char refresh_rate_type;
- unsigned long refresh_interval;
- unsigned long sdram_rtr;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
- switch (refresh_rate_type) {
- case 0x00:
- refresh_rate = 15625;
- break;
- case 0x01:
- refresh_rate = 15625/4;
- break;
- case 0x02:
- refresh_rate = 15625/2;
- break;
- case 0x03:
- refresh_rate = 15626*2;
- break;
- case 0x04:
- refresh_rate = 15625*4;
- break;
- case 0x05:
- refresh_rate = 15625*8;
- break;
- default:
- printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
- dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n");
- break;
- }
-
- break;
- }
- }
-
- refresh_interval = refresh_rate * 10 / bus_period_x_10;
- sdram_rtr = (refresh_interval & 0x3ff8) << 16;
-
- /*
- * program Refresh Timer Register (SDRAM0_RTR)
- */
- mtsdram(SDRAM0_RTR, sdram_rtr);
-}
-
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tr0;
- unsigned char wcsbc;
- unsigned char t_rp_ns;
- unsigned char t_rcd_ns;
- unsigned char t_ras_ns;
- unsigned long t_rp_clk;
- unsigned long t_ras_rcd_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rfc_clk;
- unsigned long plb_check;
- unsigned char cas_bit;
- unsigned long cas_index;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned long cycle_time_ns_x_10[3];
- unsigned long tcyc_3_0_ns_x_10;
- unsigned long tcyc_2_5_ns_x_10;
- unsigned long tcyc_2_0_ns_x_10;
- unsigned long tcyc_reg;
- unsigned long bus_period_x_10;
- PPC4xx_SYS_INFO sys_info;
- unsigned long residue;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR0, tr0);
- tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
- SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
- SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
- SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
-
- /*
- * initialization
- */
- wcsbc = 0;
- t_rp_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- tcyc_2_0_ns_x_10 = 0;
- tcyc_2_5_ns_x_10 = 0;
- tcyc_3_0_ns_x_10 = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
- t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
- t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
- dimm_num);
- spd_ddr_init_hang ();
- }
-
- cycle_time_ns_x_10[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
- }
-
- cas_index = 0;
-
- if ((cas_bit & 0x80) != 0) {
- cas_index += 3;
- } else if ((cas_bit & 0x40) != 0) {
- cas_index += 2;
- } else if ((cas_bit & 0x20) != 0) {
- cas_index += 1;
- }
-
- if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
- tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
- tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
- tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_0_available = FALSE;
- }
-
- break;
- }
- }
-
- /*
- * Program SD_WR and SD_WCSBC fields
- */
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
- switch (wcsbc) {
- case 0:
- tr0 |= SDRAM_TR0_SDWD_0_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDWD_1_CLK;
- break;
- }
-
- /*
- * Program SD_CASL field
- */
- if ((cas_2_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
- } else if ((cas_2_5_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
- } else if ((cas_3_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
- } else {
- printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
- printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * Calculate Trp in clock cycles and round up if necessary
- * Program SD_PTA field
- */
- t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rp_clk++;
- }
- switch ((unsigned long)t_rp_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDPA_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDPA_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDPA_4_CLK;
- break;
- }
-
- /*
- * Program SD_CTP field
- */
- t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
- plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
- if (sys_info.freqPLB != plb_check) {
- t_ras_rcd_clk++;
- }
- switch (t_ras_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDCP_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDCP_3_CLK;
- break;
- case 4:
- tr0 |= SDRAM_TR0_SDCP_4_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDCP_5_CLK;
- break;
- }
-
- /*
- * Program SD_LDF field
- */
- tr0 |= SDRAM_TR0_SDLD_2_CLK;
-
- /*
- * Program SD_RFTA field
- * FIXME tRFC hardcoded as 75 nanoseconds
- */
- t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
- residue = sys_info.freqPLB % (ONE_BILLION / 75);
- if (residue >= (ONE_BILLION / 150)) {
- t_rfc_clk++;
- }
- switch (t_rfc_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- tr0 |= SDRAM_TR0_SDRA_6_CLK;
- break;
- case 7:
- tr0 |= SDRAM_TR0_SDRA_7_CLK;
- break;
- case 8:
- tr0 |= SDRAM_TR0_SDRA_8_CLK;
- break;
- case 9:
- tr0 |= SDRAM_TR0_SDRA_9_CLK;
- break;
- case 10:
- tr0 |= SDRAM_TR0_SDRA_10_CLK;
- break;
- case 11:
- tr0 |= SDRAM_TR0_SDRA_11_CLK;
- break;
- case 12:
- tr0 |= SDRAM_TR0_SDRA_12_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRA_13_CLK;
- break;
- }
-
- /*
- * Program SD_RCD field
- */
- t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rcd_clk++;
- }
- switch (t_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDRD_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDRD_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRD_4_CLK;
- break;
- }
-
- debug("tr0: %x\n", tr0);
- mtsdram(SDRAM0_TR0, tr0);
-}
-
-static int short_mem_test(void)
-{
- unsigned long i, j;
- unsigned long bxcr_num;
- unsigned long *membase;
- const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
-
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
- if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
-
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- /* printf("bank enabled base:%x\n", &membase[j]); */
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- return 0;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- if (j < NUMMEMWORDS)
- return 0;
- }
-
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS)
- return 0;
- }
- }
-
- return 1;
-}
-
-static void program_tr1(void)
-{
- unsigned long tr0;
- unsigned long tr1;
- unsigned long cfg0;
- unsigned long ecc_temp;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long k;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- unsigned long rdclt;
- unsigned long rdclt_offset;
- long max_start;
- long max_end;
- long rdclt_average;
- unsigned char window_found;
- unsigned char fail_found;
- unsigned char pass_found;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR1, tr1);
- tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
- SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
-
- mfsdram(SDRAM0_TR0, tr0);
- if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
- (sys_info.freqPLB > 100000000)) {
- tr1 |= SDRAM_TR1_RDSS_TR2;
- tr1 |= SDRAM_TR1_RDSL_STAGE3;
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDSS_TR1;
- tr1 |= SDRAM_TR1_RDSL_STAGE2;
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * save CFG0 ECC setting to a temporary variable and turn ECC off
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM0_DLYCAL, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- rdclt_offset = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
- debug("Starting memory test ");
-
- for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
- /*
- * Set the timing reg for the test.
- */
- mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
-
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0) {
- current_start = rdclt_offset + rdclt;
- }
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rdclt_offset + rdclt;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val>>2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- }
- debug(".");
-
- if (window_found == TRUE) {
- break;
- }
-
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- rdclt_offset += dly_val;
- }
- debug("\n");
-
- /*
- * make sure we find the window
- */
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * restore the orignal ECC setting
- */
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
-
- /*
- * set the SDRAM TR1 RDCD value
- */
- tr1 &= ~SDRAM_TR1_RDCD_MASK;
- if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * set the SDRAM TR1 RDCLT value
- */
- tr1 &= ~SDRAM_TR1_RDCT_MASK;
- while (max_end >= (dly_val << 1)) {
- max_end -= (dly_val << 1);
- max_start -= (dly_val << 1);
- }
-
- rdclt_average = ((max_start + max_end) >> 1);
-
- if (rdclt_average < 0) {
- rdclt_average = 0;
- }
-
- if (rdclt_average >= dly_val) {
- rdclt_average -= dly_val;
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- }
- tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
-
- debug("tr1: %x\n", tr1);
-
- /*
- * program SDRAM Timing Register 1 TR1
- */
- mtsdram(SDRAM0_TR1, tr1);
-}
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bank_base_addr;
- unsigned long cr;
- unsigned long i;
- unsigned long j;
- unsigned long temp;
- unsigned char num_row_addr;
- unsigned char num_col_addr;
- unsigned char num_banks;
- unsigned char bank_size_id;
- unsigned long ctrl_bank_num[MAXBANKS];
- unsigned long bx_cr_num;
- unsigned long largest_size_index;
- unsigned long largest_size;
- unsigned long current_size_index;
- BANKPARMS bank_parms[MAXBXCR];
- unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
- unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
-
- /*
- * Set the BxCR regs. First, wipe out the bank config registers.
- */
- for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
- mtdcr(SDRAM0_CFGDATA, 0x00000000);
- bank_parms[bx_cr_num].bank_size_bytes = 0;
- }
-
-#ifdef CONFIG_BAMBOO
- /*
- * This next section is hardware dependent and must be programmed
- * to match the hardware. For bamboo, the following holds...
- * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
- * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
- * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
- * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
- * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 3;
-#else
- /*
- * Ocotea, Ebony and the other IBM/AMCC eval boards have
- * 2 DIMM slots with each max 2 banks
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 2;
-#endif
-
- /*
- * reset the bank_base address
- */
- bank_base_addr = CONFIG_SYS_SDRAM_BASE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
- bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
- debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
- num_row_addr, num_col_addr, num_banks);
-
- /*
- * Set the SDRAM0_BxCR regs
- */
- cr = 0;
- switch (bank_size_id) {
- case 0x02:
- cr |= SDRAM_BXCR_SDSZ_8;
- break;
- case 0x04:
- cr |= SDRAM_BXCR_SDSZ_16;
- break;
- case 0x08:
- cr |= SDRAM_BXCR_SDSZ_32;
- break;
- case 0x10:
- cr |= SDRAM_BXCR_SDSZ_64;
- break;
- case 0x20:
- cr |= SDRAM_BXCR_SDSZ_128;
- break;
- case 0x40:
- cr |= SDRAM_BXCR_SDSZ_256;
- break;
- case 0x80:
- cr |= SDRAM_BXCR_SDSZ_512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- bank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- switch (num_col_addr) {
- case 0x08:
- cr |= SDRAM_BXCR_SDAM_1;
- break;
- case 0x09:
- cr |= SDRAM_BXCR_SDAM_2;
- break;
- case 0x0A:
- cr |= SDRAM_BXCR_SDAM_3;
- break;
- case 0x0B:
- cr |= SDRAM_BXCR_SDAM_4;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * enable the bank
- */
- cr |= SDRAM_BXCR_SDBE;
-
- for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
- (4 << 20) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
- debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
- dimm_num, i, ctrl_bank_num[dimm_num]+i,
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- }
- }
- }
-
- /* Initialize sort tables */
- for (i = 0; i < MAXBXCR; i++) {
- sorted_bank_num[i] = i;
- sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
- }
-
- for (i = 0; i < MAXBXCR-1; i++) {
- largest_size = sorted_bank_size[i];
- largest_size_index = 255;
-
- /* Find the largest remaining value */
- for (j = i + 1; j < MAXBXCR; j++) {
- if (sorted_bank_size[j] > largest_size) {
- /* Save largest remaining value and its index */
- largest_size = sorted_bank_size[j];
- largest_size_index = j;
- }
- }
-
- if (largest_size_index != 255) {
- /* Swap the current and largest values */
- current_size_index = sorted_bank_num[largest_size_index];
- sorted_bank_size[largest_size_index] = sorted_bank_size[i];
- sorted_bank_size[i] = largest_size;
- sorted_bank_num[largest_size_index] = sorted_bank_num[i];
- sorted_bank_num[i] = current_size_index;
- }
- }
-
- /* Set the SDRAM0_BxCR regs thanks to sort tables */
- for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
- temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
- temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
- bank_parms[sorted_bank_num[bx_cr_num]].cr;
- mtdcr(SDRAM0_CFGDATA, temp);
- bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
- debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
- }
- }
-
- return(bank_base_addr);
-}
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
deleted file mode 100644
index 593a286..0000000
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ /dev/null
@@ -1,3174 +0,0 @@
-/*
- * cpu/ppc4xx/44x_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX(r)
- * 440/460: 440SP/440SPe/460EX/460GT
- *
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
-
- * (C) Copyright 2007-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
-#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
- do { \
- u32 data; \
- mfsdram(SDRAM_##mnemonic, data); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
- do { \
- u32 data; \
- data = mfdcr(SDRAM_##mnemonic); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#if defined(CONFIG_440)
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
- * memory region. Right now the cache should still be disabled in U-Boot
- * because of the EMAC driver, that need its buffer descriptor to be located
- * in non cached memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-/* enable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE 0
-#else
-/* disable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
-#endif /* CONFIG_4xx_DCACHE */
-
-void dcbz_area(u32 start_address, u32 num_bytes);
-#endif /* CONFIG_440 */
-
-#define MAXRANKS 4
-#define MAXBXCF 4
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#if !defined(CONFIG_NAND_SPL)
-/*-----------------------------------------------------------------------------+
- * sdram_memsize
- *-----------------------------------------------------------------------------*/
-phys_size_t sdram_memsize(void)
-{
- phys_size_t mem_size;
- unsigned long mcopt2;
- unsigned long mcstat;
- unsigned long mb0cf;
- unsigned long sdsz;
- unsigned long i;
-
- mem_size = 0;
-
- mfsdram(SDRAM_MCOPT2, mcopt2);
- mfsdram(SDRAM_MCSTAT, mcstat);
-
- /* DDR controller must be enabled and not in self-refresh. */
- /* Otherwise memsize is zero. */
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
- for (i = 0; i < MAXBXCF; i++) {
- mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
- /* Banks enabled */
- if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-#if defined(CONFIG_440)
- sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
-#else
- sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK;
-#endif
- switch(sdsz) {
- case SDRAM_RXBAS_SDSZ_8:
- mem_size+=8;
- break;
- case SDRAM_RXBAS_SDSZ_16:
- mem_size+=16;
- break;
- case SDRAM_RXBAS_SDSZ_32:
- mem_size+=32;
- break;
- case SDRAM_RXBAS_SDSZ_64:
- mem_size+=64;
- break;
- case SDRAM_RXBAS_SDSZ_128:
- mem_size+=128;
- break;
- case SDRAM_RXBAS_SDSZ_256:
- mem_size+=256;
- break;
- case SDRAM_RXBAS_SDSZ_512:
- mem_size+=512;
- break;
- case SDRAM_RXBAS_SDSZ_1024:
- mem_size+=1024;
- break;
- case SDRAM_RXBAS_SDSZ_2048:
- mem_size+=2048;
- break;
- case SDRAM_RXBAS_SDSZ_4096:
- mem_size+=4096;
- break;
- default:
- printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
- , sdsz);
- mem_size=0;
- break;
- }
- }
- }
- }
-
- return mem_size << 20;
-}
-
-/*-----------------------------------------------------------------------------+
- * is_ecc_enabled
- *-----------------------------------------------------------------------------*/
-static unsigned long is_ecc_enabled(void)
-{
- unsigned long val;
-
- mfsdram(SDRAM_MCOPT1, val);
-
- return SDRAM_MCOPT1_MCHK_CHK_DECODE(val);
-}
-
-/*-----------------------------------------------------------------------------+
- * board_add_ram_info
- *-----------------------------------------------------------------------------*/
-void board_add_ram_info(int use_default)
-{
- PPC4xx_SYS_INFO board_cfg;
- u32 val;
-
- if (is_ecc_enabled())
- puts(" (ECC");
- else
- puts(" (ECC not");
-
- get_sys_info(&board_cfg);
-
-#if defined(CONFIG_405EX)
- val = board_cfg.freqPLB;
-#else
- mfsdr(SDR0_DDR0, val);
- val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1);
-#endif
- printf(" enabled, %d MHz", (val * 2) / 1000000);
-
- mfsdram(SDRAM_MMODE, val);
- val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
- printf(", CL%d)", val);
-}
-#endif /* !CONFIG_NAND_SPL */
-
-#if defined(CONFIG_SPD_EEPROM)
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define SDRAM_DDR1 1
-#define SDRAM_DDR2 2
-#define SDRAM_NONE 0
-
-#define MAXDIMMS 2
-#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
-
-#define ONE_BILLION 1000000000
-
-#define CMD_NOP (7 << 19)
-#define CMD_PRECHARGE (2 << 19)
-#define CMD_REFRESH (1 << 19)
-#define CMD_EMR (0 << 19)
-#define CMD_READ (5 << 19)
-#define CMD_WRITE (4 << 19)
-
-#define SELECT_MR (0 << 16)
-#define SELECT_EMR (1 << 16)
-#define SELECT_EMR2 (2 << 16)
-#define SELECT_EMR3 (3 << 16)
-
-/* MR */
-#define DLL_RESET 0x00000100
-
-#define WRITE_RECOV_2 (1 << 9)
-#define WRITE_RECOV_3 (2 << 9)
-#define WRITE_RECOV_4 (3 << 9)
-#define WRITE_RECOV_5 (4 << 9)
-#define WRITE_RECOV_6 (5 << 9)
-
-#define BURST_LEN_4 0x00000002
-
-/* EMR */
-#define ODT_0_OHM 0x00000000
-#define ODT_50_OHM 0x00000044
-#define ODT_75_OHM 0x00000004
-#define ODT_150_OHM 0x00000040
-
-#define ODS_FULL 0x00000000
-#define ODS_REDUCED 0x00000002
-#define OCD_CALIB_DEF 0x00000380
-
-/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
-#define ODT_EB0R (0x80000000 >> 8)
-#define ODT_EB0W (0x80000000 >> 7)
-#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
-#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
-#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
-
-/* Defines for the Read Cycle Delay test */
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define NUMLOOPS 64 /* memory test loops */
-
-/*
- * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
- * To support such configurations, we "only" map the first 2GB via the TLB's. We
- * need some free virtual address space for the remaining peripherals like, SoC
- * devices, FLASH etc.
- *
- * Note that ECC is currently not supported on configurations with more than 2GB
- * SDRAM. This is because we only map the first 2GB on such systems, and therefore
- * the ECC parity byte of the remaining area can't be written.
- */
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-
-/* Private Structure Definitions */
-
-/* enum only to ease code for cas latency setting */
-typedef enum ddr_cas_id {
- DDR_CAS_2 = 20,
- DDR_CAS_2_5 = 25,
- DDR_CAS_3 = 30,
- DDR_CAS_4 = 40,
- DDR_CAS_5 = 50
-} ddr_cas_id_t;
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery);
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery);
-#ifdef CONFIG_DDR_ECC
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value);
-#endif
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
-static void test(void);
-#else
-static void DQS_calibration_process(void);
-#endif
-#endif
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
- if (i2c_probe(chip) == 0)
- if (i2c_read(chip, addr, 1, data, 1) == 0)
- return data[0];
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned char spd0[MAX_SPD_BYTES];
- unsigned char spd1[MAX_SPD_BYTES];
- unsigned char *dimm_spd[MAXDIMMS];
- unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
- unsigned long num_dimm_banks; /* on board dimm banks */
- unsigned long val;
- ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
- int write_recovery;
- phys_size_t dram_size = 0;
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*------------------------------------------------------------------
- * Set up an array of SPD matrixes.
- *-----------------------------------------------------------------*/
- dimm_spd[0] = spd0;
- dimm_spd[1] = spd1;
-
- /*------------------------------------------------------------------
- * Reset the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdr(SDR0_SRST, (0x80000000 >> 10));
- mtsdr(SDR0_SRST, 0x00000000);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
-
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the memory type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the total rank number.
- *-----------------------------------------------------------------*/
- check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Except Enabling of the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val &
- ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
- SDRAM_MCOPT2_ISIE_MASK))
- | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
- SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
- SDRAM_MCOPT2_ISIE_ENABLE));
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 1 register
- * Note: Does not enable the memory controller.
- *-----------------------------------------------------------------*/
- program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM refresh register.
- *-----------------------------------------------------------------*/
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM mode register.
- *-----------------------------------------------------------------*/
- program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- &selected_cas, &write_recovery);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
-
- /*------------------------------------------------------------------
- * Set the SDRAM Clock Timing Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CLKTR, val);
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
- ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
-
- /*------------------------------------------------------------------
- * Program the BxCF registers.
- *-----------------------------------------------------------------*/
- program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM timing registers.
- *-----------------------------------------------------------------*/
- program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the Extended Mode register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MEMODE, val);
- mtsdram(SDRAM_MEMODE,
- (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
- SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
- (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
- | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
-
- /*------------------------------------------------------------------
- * Program Initialization preload registers.
- *-----------------------------------------------------------------*/
- program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- selected_cas, write_recovery);
-
- /*------------------------------------------------------------------
- * Delay to ensure 200usec have elapsed since reset.
- *-----------------------------------------------------------------*/
- udelay(400);
-
- /*------------------------------------------------------------------
- * Set the memory queue core base addr.
- *-----------------------------------------------------------------*/
- program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Enable the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
- SDRAM_MCOPT2_IPTR_EXECUTE);
-
- /*------------------------------------------------------------------
- * Wait for IPTR_EXECUTE init sequence to complete.
- *-----------------------------------------------------------------*/
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
-
- /* enable the controller only after init sequence completes */
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
-
- /* Make sure delay-line calibration is done before proceeding */
- do {
- mfsdram(SDRAM_DLCR, val);
- } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
-
- /* get installed memory size */
- dram_size = sdram_memsize();
-
- /*
- * Limit size to 2GB
- */
- if (dram_size > CONFIG_MAX_MEM_MAPPED)
- dram_size = CONFIG_MAX_MEM_MAPPED;
-
- /* and program tlb entries for this size (dynamic) */
-
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, dram_size, 0);
-
- /*------------------------------------------------------------------
- * DQS calibration.
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- DQS_autocalibration();
-#else
- program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#endif
-
-#ifdef CONFIG_DDR_ECC
- /*------------------------------------------------------------------
- * If ecc is enabled, initialize the parity bits.
- *-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
-#endif
-
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, dram_size);
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
-
- ppc4xx_ibm_ddr2_register_dump();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- return sdram_memsize();
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- debug("\nspd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], num_of_bytes);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- debug("spd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], total_size);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that they
- * really are DDR specific DIMMs.
- *-----------------------------------------------------------------*/
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
- "slot %d.\n", (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 2:
- printf("ERROR: EDO DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 4:
- printf("ERROR: SDRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 6:
- printf("ERROR: SGRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 7:
- debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR1;
- break;
- case 8:
- debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR2;
- break;
- default:
- printf("ERROR: Unknown DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
- for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
- if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
- && (dimm_populated[dimm_num] != SDRAM_NONE)
- && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
- printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tcyc_reg;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in multiple of 10 picoseconds
- * to match the way DIMM cycle time is calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- /*
- * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
- * the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns;
- * the value presented by the lower order nibble (bits 0-3)
- * has a granularity of .1ns and is added to the value designated
- * by the higher nibble. In addition, four lines of the lower order
- * nibble are assigned to support +.25,+.33, +.66 and +.75.
- */
- /* Convert from hex to decimal */
- if ((tcyc_reg & 0x0F) == 0x0D)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- else if ((tcyc_reg & 0x0F) == 0x0C)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
- else if ((tcyc_reg & 0x0F) == 0x0B)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
- else if ((tcyc_reg & 0x0F) == 0x0A)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
- else
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time.
- * The additionnal 100ps is here to accept a small incertainty.
- */
- printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)(cycle_time*10),
- (unsigned int)dimm_num,
- (unsigned int)(calc_cycle_time*10));
- printf("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang ();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies two
- * ranks/banks maximum are availables.
- *-----------------------------------------------------------------*/
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_rank;
- unsigned long total_rank = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- dimm_rank = (dimm_rank & 0x0F) +1;
- else
- dimm_rank = dimm_rank & 0x0F;
-
-
- if (dimm_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with %lu ranks in "
- "slot %lu is not supported.\n", dimm_rank, dimm_num);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- } else
- total_rank += dimm_rank;
- }
- if (total_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with a total of %d ranks "
- "for all slots.\n", (unsigned int)total_rank);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Remove one of the DIMM modules.\n\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * only support 2.5V modules.
- * This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- switch (voltage_type) {
- case 0x00:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 5.0 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x01:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is LVTTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x02:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 1.5 Volt.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x03:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 3.3 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x04:
- /* 2.5 Voltage only for DDR1 */
- break;
- case 0x05:
- /* 1.8 Voltage only for DDR2 */
- break;
- default:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------------+
- * program_copt1.
- *-----------------------------------------------------------------------------*/
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long mcopt1;
- unsigned long ecc_enabled;
- unsigned long ecc = 0;
- unsigned long data_width = 0;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
- unsigned long registered = 0;
- unsigned long attribute = 0;
- unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- unsigned long bankcount;
- unsigned long ddrtype;
- unsigned long val;
-
-#ifdef CONFIG_DDR_ECC
- ecc_enabled = TRUE;
-#else
- ecc_enabled = FALSE;
-#endif
- dimm_32bit = FALSE;
- dimm_64bit = FALSE;
- buf0 = FALSE;
- buf1 = FALSE;
-
- /*------------------------------------------------------------------
- * Set memory controller options reg 1, SDRAM_MCOPT1.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, val);
- mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
- SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
- SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
- SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
- SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
- SDRAM_MCOPT1_DREF_MASK);
-
- mcopt1 |= SDRAM_MCOPT1_QDEP;
- mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
- mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- /* test ecc support */
- ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) /* ecc not supported */
- ecc_enabled = FALSE;
-
- /* test bank count */
- bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
- if (bankcount == 0x04) /* bank count = 4 */
- mcopt1 |= SDRAM_MCOPT1_4_BANKS;
- else /* bank count = 8 */
- mcopt1 |= SDRAM_MCOPT1_8_BANKS;
-
- /* test DDR type */
- ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
- /* test for buffered/unbuffered, registered, differential clocks */
- registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
- attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
-
- /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- if (dimm_num == 0) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) { /* DDR2 always buffered */
- /* TODO: what about above comments ? */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- } else {
- /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf0 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- }
- }
- }
- else if (dimm_num == 1) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) {
- /* DDR2 always buffered */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- } else {
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf1 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- }
- }
- }
-
- /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
- data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
-
- switch (data_width) {
- case 72:
- case 64:
- dimm_64bit = TRUE;
- break;
- case 40:
- case 32:
- dimm_32bit = TRUE;
- break;
- default:
- printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
- break;
- }
- }
- }
-
- /* verify matching properties */
- if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
- if (buf0 != buf1) {
- printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
- printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
- spd_ddr_init_hang ();
- }
- else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_64;
- } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_32;
- } else {
- printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
-
- if (ecc_enabled == TRUE)
- mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
- else
- mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
-
- mtsdram(SDRAM_MCOPT1, mcopt1);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_codt.
- *-----------------------------------------------------------------------------*/
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long codt;
- unsigned long modt0 = 0;
- unsigned long modt1 = 0;
- unsigned long modt2 = 0;
- unsigned long modt3 = 0;
- unsigned char dimm_num;
- unsigned char dimm_rank;
- unsigned char total_rank = 0;
- unsigned char total_dimm = 0;
- unsigned char dimm_type = 0;
- unsigned char firstSlot = 0;
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CODT, codt);
- codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END);
- codt |= SDRAM_CODT_IO_NMODE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
- dimm_rank = (dimm_rank & 0x0F) + 1;
- dimm_type = SDRAM_DDR2;
- } else {
- dimm_rank = dimm_rank & 0x0F;
- dimm_type = SDRAM_DDR1;
- }
-
- total_rank += dimm_rank;
- total_dimm++;
- if ((dimm_num == 0) && (total_dimm == 1))
- firstSlot = TRUE;
- else
- firstSlot = FALSE;
- }
- }
- if (dimm_type == SDRAM_DDR2) {
- codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
- if ((total_dimm == 1) && (firstSlot == TRUE)) {
- if (total_rank == 1) { /* PUUU */
- codt |= CALC_ODT_R(0);
- modt0 = CALC_ODT_W(0);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* PPUU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
- modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
- if (total_rank == 1) { /* UUPU */
- codt |= CALC_ODT_R(2);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2);
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* UUPP */
- codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
- modt3 = 0x00000000;
- }
- }
- if (total_dimm == 2) {
- if (total_rank == 2) { /* PUPU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
- modt0 = CALC_ODT_RW(2);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0);
- modt3 = 0x00000000;
- }
- if (total_rank == 4) { /* PPPP */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
- CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
- modt3 = 0x00000000;
- }
- }
- } else {
- codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
-
- if (total_dimm == 1) {
- if (total_rank == 1)
- codt |= 0x00800000;
- if (total_rank == 2)
- codt |= 0x02800000;
- }
- if (total_dimm == 2) {
- if (total_rank == 2)
- codt |= 0x08800000;
- if (total_rank == 4)
- codt |= 0x2a800000;
- }
- }
-
- debug("nb of dimm %d\n", total_dimm);
- debug("nb of rank %d\n", total_rank);
- if (total_dimm == 1)
- debug("dimm in slot %d\n", firstSlot);
-
- mtsdram(SDRAM_CODT, codt);
- mtsdram(SDRAM_MODT0, modt0);
- mtsdram(SDRAM_MODT1, modt1);
- mtsdram(SDRAM_MODT2, modt2);
- mtsdram(SDRAM_MODT3, modt3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_initplr.
- *-----------------------------------------------------------------------------*/
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery)
-{
- u32 cas = 0;
- u32 odt = 0;
- u32 ods = 0;
- u32 mr;
- u32 wr;
- u32 emr;
- u32 emr2;
- u32 emr3;
- int dimm_num;
- int total_dimm = 0;
-
- /******************************************************
- ** Assumption: if more than one DIMM, all DIMMs are the same
- ** as already checked in check_memory_type
- ******************************************************/
-
- if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
- mtsdram(SDRAM_INITPLR0, 0x81B80000);
- mtsdram(SDRAM_INITPLR1, 0x81900400);
- mtsdram(SDRAM_INITPLR2, 0x81810000);
- mtsdram(SDRAM_INITPLR3, 0xff800162);
- mtsdram(SDRAM_INITPLR4, 0x81900400);
- mtsdram(SDRAM_INITPLR5, 0x86080000);
- mtsdram(SDRAM_INITPLR6, 0x86080000);
- mtsdram(SDRAM_INITPLR7, 0x81000062);
- } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
- switch (selected_cas) {
- case DDR_CAS_3:
- cas = 3 << 4;
- break;
- case DDR_CAS_4:
- cas = 4 << 4;
- break;
- case DDR_CAS_5:
- cas = 5 << 4;
- break;
- default:
- printf("ERROR: ucode error on selected_cas value %d", selected_cas);
- spd_ddr_init_hang ();
- break;
- }
-
-#if 0
- /*
- * ToDo - Still a problem with the write recovery:
- * On the Corsair CM2X512-5400C4 module, setting write recovery
- * in the INITPLR reg to the value calculated in program_mode()
- * results in not correctly working DDR2 memory (crash after
- * relocation).
- *
- * So for now, set the write recovery to 3. This seems to work
- * on the Corair module too.
- *
- * 2007-03-01, sr
- */
- switch (write_recovery) {
- case 3:
- wr = WRITE_RECOV_3;
- break;
- case 4:
- wr = WRITE_RECOV_4;
- break;
- case 5:
- wr = WRITE_RECOV_5;
- break;
- case 6:
- wr = WRITE_RECOV_6;
- break;
- default:
- printf("ERROR: write recovery not support (%d)", write_recovery);
- spd_ddr_init_hang ();
- break;
- }
-#else
- wr = WRITE_RECOV_3; /* test-only, see description above */
-#endif
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- total_dimm++;
- if (total_dimm == 1) {
- odt = ODT_150_OHM;
- ods = ODS_FULL;
- } else if (total_dimm == 2) {
- odt = ODT_75_OHM;
- ods = ODS_REDUCED;
- } else {
- printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
- spd_ddr_init_hang ();
- }
-
- mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
- emr = CMD_EMR | SELECT_EMR | odt | ods;
- emr2 = CMD_EMR | SELECT_EMR2;
- emr3 = CMD_EMR | SELECT_EMR3;
- /* NOP - Wait 106 MemClk cycles */
- mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
- SDRAM_INITPLR_IMWT_ENCODE(106));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* EMR2 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR3 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* MR w/ DLL reset - 200 cycle wait for DLL reset */
- mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
- SDRAM_INITPLR_IMWT_ENCODE(200));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
- SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
- /* EMR OCD Exit */
- mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- } else {
- printf("ERROR: ucode error as unknown DDR type in program_initplr");
- spd_ddr_init_hang ();
- }
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_MMODE register.
- * the selected_cas is an output parameter, that will be passed
- * by caller to call the above program_initplr( )
- *-----------------------------------------------------------------*/
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_wr_ns;
- unsigned long t_wr_clk;
- unsigned long cas_bit;
- unsigned long cas_index;
- unsigned long sdram_freq;
- unsigned long ddr_check;
- unsigned long mmode;
- unsigned long tcyc_reg;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_2_5_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ns_x_100;
- unsigned long max_2_5_tcyc_ns_x_100;
- unsigned long max_3_0_tcyc_ns_x_100;
- unsigned long max_4_0_tcyc_ns_x_100;
- unsigned long max_5_0_tcyc_ns_x_100;
- unsigned long cycle_time_ns_x_100[3];
- PPC4xx_SYS_INFO board_cfg;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned char cas_4_0_available;
- unsigned char cas_5_0_available;
- unsigned long sdr_ddrpll;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
- debug("sdram_freq=%lu\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_wr_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- cas_4_0_available = TRUE;
- cas_5_0_available = TRUE;
- max_2_0_tcyc_ns_x_100 = 10;
- max_2_5_tcyc_ns_x_100 = 10;
- max_3_0_tcyc_ns_x_100 = 10;
- max_4_0_tcyc_ns_x_100 = 10;
- max_5_0_tcyc_ns_x_100 = 10;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
-
- /* For a particular DIMM, grab the three CAS values it supports */
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- if ((tcyc_reg & 0x0F) == 0x0D) {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- } else {
- printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
- "in slot %d\n", (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- }
- } else {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- }
- debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
- cycle_time_ns_x_100[cas_index]);
- }
-
- /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
- /* supported for a particular DIMM. */
- cas_index = 0;
-
- if (sdram_ddr1) {
- /*
- * DDR devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
- */
- if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_0_available = FALSE;
- }
- } else {
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_5_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
- }
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MMODE, mmode);
- mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
- cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
- debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
- debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
- debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
- *selected_cas = DDR_CAS_2;
- } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
- *selected_cas = DDR_CAS_2_5;
- } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
- } else { /* DDR2 */
- debug("cas_3_0_available=%d\n", cas_3_0_available);
- debug("cas_4_0_available=%d\n", cas_4_0_available);
- debug("cas_5_0_available=%d\n", cas_5_0_available);
- if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
- *selected_cas = DDR_CAS_4;
- } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
- *selected_cas = DDR_CAS_5;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
- printf("cas3=%d cas4=%d cas5=%d\n",
- cas_3_0_available, cas_4_0_available, cas_5_0_available);
- printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
- sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang ();
- }
- }
-
- if (sdram_ddr1 == TRUE)
- mmode |= SDRAM_MMODE_WR_DDR1;
- else {
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
- spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
- if (sdram_freq != ddr_check)
- t_wr_clk++;
-
- switch (t_wr_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
- break;
- case 4:
- mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
- break;
- case 5:
- mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
- break;
- default:
- mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
- break;
- }
- *write_recovery = t_wr_clk;
- }
-
- debug("CAS latency = %d\n", *selected_cas);
- debug("Write recovery = %d\n", *write_recovery);
-
- mtsdram(SDRAM_MMODE, mmode);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_rtr.
- *-----------------------------------------------------------------------------*/
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- PPC4xx_SYS_INFO board_cfg;
- unsigned long max_refresh_rate;
- unsigned long dimm_num;
- unsigned long refresh_rate_type;
- unsigned long refresh_rate;
- unsigned long rint;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- unsigned long val;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Refresh Timing Register, SDRAM_RTR
- *-----------------------------------------------------------------*/
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- max_refresh_rate = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
-
- refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
- refresh_rate_type &= 0x7F;
- switch (refresh_rate_type) {
- case 0:
- refresh_rate = 15625;
- break;
- case 1:
- refresh_rate = 3906;
- break;
- case 2:
- refresh_rate = 7812;
- break;
- case 3:
- refresh_rate = 31250;
- break;
- case 4:
- refresh_rate = 62500;
- break;
- case 5:
- refresh_rate = 125000;
- break;
- default:
- refresh_rate = 0;
- printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
- (unsigned int)dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
-
- max_refresh_rate = max(max_refresh_rate, refresh_rate);
- }
- }
-
- rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
- mfsdram(SDRAM_RTR, val);
- mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
- (SDRAM_RTR_RINT_ENCODE(rint)));
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_TRx registers.
- *-----------------------------------------------------------------*/
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_rp_ns;
- unsigned long t_rcd_ns;
- unsigned long t_rrd_ns;
- unsigned long t_ras_ns;
- unsigned long t_rc_ns;
- unsigned long t_rfc_ns;
- unsigned long t_wpc_ns;
- unsigned long t_wtr_ns;
- unsigned long t_rpc_ns;
- unsigned long t_rp_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rrd_clk;
- unsigned long t_ras_clk;
- unsigned long t_rc_clk;
- unsigned long t_rfc_clk;
- unsigned long t_wpc_clk;
- unsigned long t_wtr_clk;
- unsigned long t_rpc_clk;
- unsigned long sdtr1, sdtr2, sdtr3;
- unsigned long ddr_check;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
-
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_rp_ns = 0;
- t_rrd_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- t_rc_ns = 0;
- t_rfc_ns = 0;
- t_wpc_ns = 0;
- t_wtr_ns = 0;
- t_rpc_ns = 0;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR2)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 1, SDRAM_TR1
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR1, sdtr1);
- sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
- SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
-
- /* default values */
- sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
- sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
-
- /* normal operations */
- sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
- sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
-
- mtsdram(SDRAM_SDTR1, sdtr1);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 2, SDRAM_TR2
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR2, sdtr2);
- sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
- SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
- SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
- SDRAM_SDTR2_RRD_MASK);
-
- /*
- * convert t_rcd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
- if (sdram_freq != ddr_check)
- t_rcd_clk++;
-
- switch (t_rcd_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
- break;
- }
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if (sdram_freq < 200000000) {
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- } else {
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- }
- } else { /* DDR2 */
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
- }
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
- if (sdram_freq != ddr_check)
- t_wpc_clk++;
-
- switch (t_wpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
- if (sdram_freq != ddr_check)
- t_wtr_clk++;
-
- switch (t_wtr_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
- if (sdram_freq != ddr_check)
- t_rpc_clk++;
-
- switch (t_rpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
- break;
- }
- }
-
- /* default value */
- sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
-
- /*
- * convert t_rrd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
- if (sdram_freq != ddr_check)
- t_rrd_clk++;
-
- if (t_rrd_clk == 3)
- sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
- else
- sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
-
- /*
- * convert t_rp from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
- if (sdram_freq != ddr_check)
- t_rp_clk++;
-
- switch (t_rp_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
- break;
- case 6:
- sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
- break;
- }
-
- mtsdram(SDRAM_SDTR2, sdtr2);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 3, SDRAM_TR3
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR3, sdtr3);
- sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
- SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
-
- /*
- * convert t_ras from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
- if (sdram_freq != ddr_check)
- t_ras_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
-
- /*
- * convert t_rc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
- if (sdram_freq != ddr_check)
- t_rc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
-
- /* default xcs value */
- sdtr3 |= SDRAM_SDTR3_XCS;
-
- /*
- * convert t_rfc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
- if (sdram_freq != ddr_check)
- t_rfc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
-
- mtsdram(SDRAM_SDTR3, sdtr3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_bxcf.
- *-----------------------------------------------------------------------------*/
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long num_col_addr;
- unsigned long num_ranks;
- unsigned long num_banks;
- unsigned long mode;
- unsigned long ind_rank;
- unsigned long ind;
- unsigned long ind_bank;
- unsigned long bank_0_populated;
-
- /*------------------------------------------------------------------
- * Set the BxCF regs. First, wipe out the bank config registers.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MB0CF, 0x00000000);
- mtsdram(SDRAM_MB1CF, 0x00000000);
- mtsdram(SDRAM_MB2CF, 0x00000000);
- mtsdram(SDRAM_MB3CF, 0x00000000);
-
- mode = SDRAM_BXCF_M_BE_ENABLE;
-
- bank_0_populated = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) +1;
- else
- num_ranks = num_ranks & 0x0F;
-
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
-
- for (ind_bank = 0; ind_bank < 2; ind_bank++) {
- if (num_banks == 4)
- ind = 0;
- else
- ind = 5 << 8;
- switch (num_col_addr) {
- case 0x08:
- mode |= (SDRAM_BXCF_M_AM_0 + ind);
- break;
- case 0x09:
- mode |= (SDRAM_BXCF_M_AM_1 + ind);
- break;
- case 0x0A:
- mode |= (SDRAM_BXCF_M_AM_2 + ind);
- break;
- case 0x0B:
- mode |= (SDRAM_BXCF_M_AM_3 + ind);
- break;
- case 0x0C:
- mode |= (SDRAM_BXCF_M_AM_4 + ind);
- break;
- default:
- printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", (unsigned int)num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
- bank_0_populated = 1;
-
- for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
- mtsdram(SDRAM_MB0CF +
- ((dimm_num + bank_0_populated + ind_rank) << 2),
- mode);
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * program memory queue.
- *-----------------------------------------------------------------*/
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- phys_size_t rank_base_addr;
- unsigned long rank_reg;
- phys_size_t rank_size_bytes;
- unsigned long rank_size_id;
- unsigned long num_ranks;
- unsigned long baseadd_size;
- unsigned long i;
- unsigned long bank_0_populated = 0;
- phys_size_t total_size = 0;
-
- /*------------------------------------------------------------------
- * Reset the rank_base_address.
- *-----------------------------------------------------------------*/
- rank_reg = SDRAM_R0BAS;
-
- rank_base_addr = 0x00000000;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) + 1;
- else
- num_ranks = num_ranks & 0x0F;
-
- rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
-
- /*------------------------------------------------------------------
- * Set the sizes
- *-----------------------------------------------------------------*/
- baseadd_size = 0;
- switch (rank_size_id) {
- case 0x01:
- baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
- total_size = 1024;
- break;
- case 0x02:
- baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
- total_size = 2048;
- break;
- case 0x04:
- baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
- total_size = 4096;
- break;
- case 0x08:
- baseadd_size |= SDRAM_RXBAS_SDSZ_32;
- total_size = 32;
- break;
- case 0x10:
- baseadd_size |= SDRAM_RXBAS_SDSZ_64;
- total_size = 64;
- break;
- case 0x20:
- baseadd_size |= SDRAM_RXBAS_SDSZ_128;
- total_size = 128;
- break;
- case 0x40:
- baseadd_size |= SDRAM_RXBAS_SDSZ_256;
- total_size = 256;
- break;
- case 0x80:
- baseadd_size |= SDRAM_RXBAS_SDSZ_512;
- total_size = 512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- (unsigned int)rank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- rank_size_bytes = total_size << 20;
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
- bank_0_populated = 1;
-
- for (i = 0; i < num_ranks; i++) {
- mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
- (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
- baseadd_size));
- rank_base_addr += rank_size_bytes;
- }
- }
- }
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Enable high bandwidth access
- * This is currently not used, but with this setup
- * it is possible to use it later on in e.g. the Linux
- * EMAC driver for performance gain.
- */
- mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
-
- /*
- * Set optimal value for Memory Queue HB/LL Configuration registers
- */
- mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
- SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
- SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
- mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
- SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
- SDRAM_CONF1LL_RPLM);
- mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
-#endif
-}
-
-#ifdef CONFIG_DDR_ECC
-/*-----------------------------------------------------------------------------+
- * program_ecc.
- *-----------------------------------------------------------------------------*/
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value)
-{
- unsigned long dimm_num;
- unsigned long ecc;
-
- ecc = 0;
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
- }
- if (ecc == 0)
- return;
-
- do_program_ecc(tlb_word2_i_value);
-}
-#endif
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-/*-----------------------------------------------------------------------------+
- * program_DQS_calibration.
- *-----------------------------------------------------------------------------*/
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long val;
-
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
- mtsdram(SDRAM_RQDC, 0x80000037);
- mtsdram(SDRAM_RDCC, 0x40000000);
- mtsdram(SDRAM_RFDC, 0x000001DF);
-
- test();
-#else
- /*------------------------------------------------------------------
- * Program RDCC register
- * Read sample cycle auto-update enable
- *-----------------------------------------------------------------*/
-
- mfsdram(SDRAM_RDCC, val);
- mtsdram(SDRAM_RDCC,
- (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | SDRAM_RDCC_RSAE_ENABLE);
-
- /*------------------------------------------------------------------
- * Program RQDC register
- * Internal DQS delay mechanism enable
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
-
- /*------------------------------------------------------------------
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- * Set RFOS to 1/4 of memclk cycle (0x3f)
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_RFDC, val);
- mtsdram(SDRAM_RFDC,
- (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
- SDRAM_RFDC_RFFD_MASK))
- | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
- SDRAM_RFDC_RFFD_ENCODE(0)));
-
- DQS_calibration_process();
-#endif
-}
-
-static int short_mem_test(void)
-{
- u32 *membase;
- u32 bxcr_num;
- u32 bxcf;
- int i;
- int j;
- phys_size_t base_addr;
- u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
- int l;
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
-
- /* Banks enabled */
- if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
- /* Bank is enabled */
-
- /*
- * Only run test on accessable memory (below 2GB)
- */
- base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
- if (base_addr >= CONFIG_MAX_MEM_MAPPED)
- continue;
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- membase = (u32 *)(u32)base_addr;
-
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (l=0; l<NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- return 0;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- }
- }
- } /* if bank enabled */
- } /* for bxcf_num */
-
- return 1;
-}
-
-#ifndef HARD_CODED_DQS
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void DQS_calibration_process(void)
-{
- unsigned long rfdc_reg;
- unsigned long rffd;
- unsigned long val;
- long rffd_average;
- long max_start;
- long min_end;
- unsigned long begin_rqfd[MAXRANKS];
- unsigned long begin_rffd[MAXRANKS];
- unsigned long end_rqfd[MAXRANKS];
- unsigned long end_rffd[MAXRANKS];
- char window_found;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- long max_end;
- unsigned char fail_found;
- unsigned char pass_found;
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- u32 rqdc_reg;
- u32 rqfd;
- u32 rqfd_start;
- u32 rqfd_average;
- int loopi = 0;
- char str[] = "Auto calibration -";
- char slash[] = "\\|/-\\|/-";
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
-
- /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
- rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
-
- puts(str);
-
-calibration_loop:
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
-#else /* CONFIG_DDR_RQDC_FIXED */
- /*
- * On Katmai the complete auto-calibration somehow doesn't seem to
- * produce the best results, meaning optimal values for RQFD/RFFD.
- * This was discovered by GDA using a high bandwidth scope,
- * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
- * so now on Katmai "only" RFFD is auto-calibrated.
- */
- mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- max_start = 0;
- min_end = 0;
- begin_rqfd[0] = 0;
- begin_rffd[0] = 0;
- begin_rqfd[1] = 0;
- begin_rffd[1] = 0;
- end_rqfd[0] = 0;
- end_rffd[0] = 0;
- end_rqfd[1] = 0;
- end_rffd[1] = 0;
- window_found = FALSE;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM_DLCR, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rffd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rffd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val >> 2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- } /* for rffd */
-
- /*------------------------------------------------------------------
- * Set the average RFFD value
- *-----------------------------------------------------------------*/
- rffd_average = ((max_start + max_end) >> 1);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
- /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rqfd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rqfd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
-
- rqfd_average = ((max_start + max_end) >> 1);
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- /* try again from with a different RQFD start value */
- rqfd_start++;
- goto calibration_loop;
- }
-
- printf("\nERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang ();
- }
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC,
- (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- blank_string(strlen(str));
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- /*
- * Now complete RDSS configuration as mentioned on page 7 of the AMCC
- * PowerPC440SP/SPe DDR2 application note:
- * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- */
- mfsdram(SDRAM_RTSR, val);
- if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
- mfsdram(SDRAM_RDCC, val);
- if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
- val += 0x40000000;
- mtsdram(SDRAM_RDCC, val);
- }
- }
-
- mfsdram(SDRAM_DLCR, val);
- debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RQDC, val);
- debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RFDC, val);
- debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RDCC, val);
- debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
-}
-#else /* calibration test with hardvalues */
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void test(void)
-{
- unsigned long dimm_num;
- unsigned long ecc_temp;
- unsigned long i, j;
- unsigned long *membase;
- unsigned long bxcf[MAXRANKS];
- unsigned long val;
- char window_found;
- char begin_found[MAXDIMMS];
- char end_found[MAXDIMMS];
- char search_end[MAXDIMMS];
- unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, ecc_temp);
- ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
- mfsdram(SDRAM_MCOPT1, val);
- mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
- SDRAM_MCOPT1_MCHK_NON);
-
- window_found = FALSE;
- begin_found[0] = FALSE;
- end_found[0] = FALSE;
- search_end[0] = FALSE;
- begin_found[1] = FALSE;
- end_found[1] = FALSE;
- search_end[1] = FALSE;
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
-
- /* Banks enabled */
- if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-
- /* Bank is enabled */
- membase =
- (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- break;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- if (j < NUMMEMWORDS)
- break;
- }
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (i < NUMMEMTESTS) {
- if ((end_found[dimm_num] == FALSE) &&
- (search_end[dimm_num] == TRUE)) {
- end_found[dimm_num] = TRUE;
- }
- if ((end_found[0] == TRUE) &&
- (end_found[1] == TRUE))
- break;
- } else {
- if (begin_found[dimm_num] == FALSE) {
- begin_found[dimm_num] = TRUE;
- search_end[dimm_num] = TRUE;
- }
- }
- } else {
- begin_found[dimm_num] = TRUE;
- end_found[dimm_num] = TRUE;
- }
- }
-
- if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
- window_found = TRUE;
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- spd_ddr_init_hang ();
- }
-
- /*------------------------------------------------------------------
- * Restore the ECC variable to what it originally was
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MCOPT1,
- (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
- | ecc_temp);
-}
-#endif /* !HARD_CODED_DQS */
-#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
-
-#else /* CONFIG_SPD_EEPROM */
-
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
- * The configuration is performed using static, compile-
- * time parameters.
- * Configures the PPC405EX(r) and PPC460EX/GT
- *---------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- /*
- * Only run this SDRAM init code once. For NAND booting
- * targets like Kilauea, we call initdram() early from the
- * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
- * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
- * which calls initdram() again. This time the controller
- * mustn't be reconfigured again since we're already running
- * from SDRAM.
- */
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- unsigned long val;
-
-#if defined(CONFIG_440)
- mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
- mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
- mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
- mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
- mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
- mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
- mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
- mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
-#endif
-
- /* Set Memory Bank Configuration Registers */
-
- mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
- mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
- mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
- mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
-
- /* Set Memory Clock Timing Register */
-
- mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
-
- /* Set Refresh Time Register */
-
- mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
-
- /* Set SDRAM Timing Registers */
-
- mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
- mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
- mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
-
- /* Set Mode and Extended Mode Registers */
-
- mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
- mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
-
- /* Set Memory Controller Options 1 Register */
-
- mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
-
- /* Set Manual Initialization Control Registers */
-
- mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
- mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
- mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
- mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
- mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
- mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
- mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
- mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
- mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
- mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
- mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
- mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
- mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
- mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
- mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
- mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
-
- /* Set On-Die Termination Registers */
-
- mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
- mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
- mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
-
- /* Set Write Timing Register */
-
- mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
-
- /*
- * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
- * SDRAM0_MCOPT2[IPTR] = 1
- */
-
- mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
- SDRAM_MCOPT2_IPTR_EXECUTE));
-
- /*
- * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
- * completion of initialization.
- */
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
-
- /* Set Delay Control Registers */
-
- mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
- mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
- mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
-#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
- /*
- * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
- */
-
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
-
-#if defined(CONFIG_440)
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
-#endif
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*------------------------------------------------------------------
- | DQS calibration.
- +-----------------------------------------------------------------*/
- DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#if defined(CONFIG_DDR_ECC)
- do_program_ecc(0);
-#endif /* defined(CONFIG_DDR_ECC) */
-
-#if defined(CONFIG_440)
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
-#endif
-
- ppc4xx_ibm_ddr2_register_dump();
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-
- return (CONFIG_SYS_MBYTES_SDRAM << 20);
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#if defined(CONFIG_440)
-u32 mfdcr_any(u32 dcr)
-{
- u32 val;
-
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- val = mfdcr(SDRAM_R0BAS + 0);
- break;
- case SDRAM_R0BAS + 1:
- val = mfdcr(SDRAM_R0BAS + 1);
- break;
- case SDRAM_R0BAS + 2:
- val = mfdcr(SDRAM_R0BAS + 2);
- break;
- case SDRAM_R0BAS + 3:
- val = mfdcr(SDRAM_R0BAS + 3);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- val = 0; /* just to satisfy the compiler */
- }
-
- return val;
-}
-
-void mtdcr_any(u32 dcr, u32 val)
-{
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- mtdcr(SDRAM_R0BAS + 0, val);
- break;
- case SDRAM_R0BAS + 1:
- mtdcr(SDRAM_R0BAS + 1, val);
- break;
- case SDRAM_R0BAS + 2:
- mtdcr(SDRAM_R0BAS + 2, val);
- break;
- case SDRAM_R0BAS + 3:
- mtdcr(SDRAM_R0BAS + 3, val);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- }
-}
-#endif /* defined(CONFIG_440) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-
-inline void ppc4xx_ibm_ddr2_register_dump(void)
-{
-#if defined(DEBUG)
- printf("\nPPC4xx IBM DDR2 Register Dump:\n");
-
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
-#endif /* (defined(CONFIG_440SP) || ... */
-#if defined(CONFIG_405EX)
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
-#endif /* defined(CONFIG_405EX) */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
- /*
- * OPART is only used as a trigger register.
- *
- * No data is contained in this register, and reading or writing
- * to is can cause bad things to happen (hangs). Just skip it and
- * report "N/A".
- */
- printf("%20s = N/A\n", "SDRAM_OPART");
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
-#endif /* defined(DEBUG) */
-}
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
deleted file mode 100644
index 0283c91..0000000
--- a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ /dev/null
@@ -1,1251 +0,0 @@
-/*
- * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX
- * 440/460: 440SP/440SPe/460EX/460GT/460SX
- *
- * (C) Copyright 2008 Applied Micro Circuits Corporation
- * Adam Graham <agraham@amcc.com>
- *
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#undef DEBUG
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-
-/*
- * Only compile the DDR auto-calibration code for NOR boot and
- * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
- */
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-
-#define MAXBXCF 4
-#define SDRAM_RXBAS_SHIFT_1M 20
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
-#define NUMMEMTESTS 24
-#else
-#define NUMMEMTESTS 8
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
-#define NUMLOOPS 1 /* configure as you deem approporiate */
-#define NUMMEMWORDS 16
-
-#define SDRAM_RDCC_RDSS_VAL(n) SDRAM_RDCC_RDSS_DECODE(ddr_rdss_opt(n))
-
-/* Private Structure Definitions */
-
-struct autocal_regs {
- u32 rffd;
- u32 rqfd;
-};
-
-struct ddrautocal {
- u32 rffd;
- u32 rffd_min;
- u32 rffd_max;
- u32 rffd_size;
- u32 rqfd;
- u32 rqfd_size;
- u32 rdcc;
- u32 flags;
-};
-
-struct sdram_timing {
- u32 wrdtr;
- u32 clktr;
-};
-
-struct sdram_timing_clks {
- u32 wrdtr;
- u32 clktr;
- u32 rdcc;
- u32 flags;
-};
-
-struct autocal_clks {
- struct sdram_timing_clks clocks;
- struct ddrautocal autocal;
-};
-
-/*--------------------------------------------------------------------------+
- * Prototypes
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-static u32 DQS_calibration_methodA(struct ddrautocal *);
-static u32 program_DQS_calibration_methodA(struct ddrautocal *);
-#else
-static u32 DQS_calibration_methodB(struct ddrautocal *);
-static u32 program_DQS_calibration_methodB(struct ddrautocal *);
-#endif
-static int short_mem_test(u32 *);
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void
-spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-#endif /* defined(CONFIG_SPD_EEPROM) */
-
-ulong __ddr_scan_option(ulong default_val)
-{
- return default_val;
-}
-ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
-
-u32 __ddr_rdss_opt(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt")));
-
-
-static u32 *get_membase(int bxcr_num)
-{
- ulong bxcf;
- u32 *membase;
-
-#if defined(SDRAM_R0BAS)
- /* BAS from Memory Queue rank reg. */
- membase =
- (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
- bxcf = 0; /* just to satisfy the compiler */
-#else
- /* BAS from SDRAM_MBxCF mem rank reg. */
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
- membase = (u32 *)((bxcf & 0xfff80000) << 3);
-#endif
-
- return membase;
-}
-
-static inline void ecc_clear_status_reg(void)
-{
- mtsdram(SDRAM_ECCES, 0xffffffff);
-#if defined(SDRAM_R0BAS)
- mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
-#endif
-}
-
-/*
- * Reset and relock memory DLL after SDRAM_CLKTR change
- */
-static inline void relock_memory_DLL(void)
-{
- u32 reg;
-
- mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
-
- do {
- mfsdram(SDRAM_MCSTAT, reg);
- } while (!(reg & SDRAM_MCSTAT_MIC_COMP));
-
- mfsdram(SDRAM_MCOPT2, reg);
- mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
-}
-
-static int ecc_check_status_reg(void)
-{
- u32 ecc_status;
-
- /*
- * Compare suceeded, now check
- * if got ecc error. If got an
- * ecc error, then don't count
- * this as a passing value
- */
- mfsdram(SDRAM_ECCES, ecc_status);
- if (ecc_status != 0x00000000) {
- /* clear on error */
- ecc_clear_status_reg();
- /* ecc check failure */
- return 0;
- }
- ecc_clear_status_reg();
- sync();
-
- return 1;
-}
-
-/* return 1 if passes, 0 if fail */
-static int short_mem_test(u32 *base_address)
-{
- int i, j, l;
- u32 ecc_mode = 0;
-
- ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
- /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
- /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
- /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
- /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
- /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
- /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
- /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
- /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
- /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
- /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
- /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
- /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
- /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
- /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
- /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
- /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
- /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
- };
-
- mfsdram(SDRAM_MCOPT1, ecc_mode);
- if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
- SDRAM_MCOPT1_MCHK_CHK_REP) {
- ecc_clear_status_reg();
- sync();
- ecc_mode = 1;
- } else {
- ecc_mode = 0;
- }
-
- /*
- * Run the short memory test.
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- base_address[j] = test[i][j];
- ppcDcbf((ulong)&(base_address[j]));
- }
- sync();
- iobarrier_rw();
- for (l = 0; l < NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (base_address[j] != test[i][j]) {
- ppcDcbf((u32)&(base_address[j]));
- return 0;
- } else {
- if (ecc_mode) {
- if (!ecc_check_status_reg())
- return 0;
- }
- }
- ppcDcbf((u32)&(base_address[j]));
- } /* for (j = 0; j < NUMMEMWORDS; j++) */
- sync();
- iobarrier_rw();
- } /* for (l=0; l<NUMLOOPS; l++) */
- }
-
- return 1;
-}
-
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodA.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodA(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodA()
- *
- * Autocalibration Method A
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD
- * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1; RQDC.RQFD
- * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD
- * }
- * }
- * }
- */
-static u32 DQS_calibration_methodA(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- u32 passed = 0;
-
- int in_window;
- struct autocal_regs curr_win_min;
- struct autocal_regs curr_win_max;
- struct autocal_regs best_win_min;
- struct autocal_regs best_win_max;
- struct autocal_regs loop_win_min;
- struct autocal_regs loop_win_max;
-
-#ifdef DEBUG
- ulong temp;
-#endif
- ulong rdcc;
-
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
-
- /* start */
- in_window = 0;
-
- memset(&curr_win_min, 0, sizeof(curr_win_min));
- memset(&curr_win_max, 0, sizeof(curr_win_max));
- memset(&best_win_min, 0, sizeof(best_win_min));
- memset(&best_win_max, 0, sizeof(best_win_max));
- memset(&loop_win_min, 0, sizeof(loop_win_min));
- memset(&loop_win_max, 0, sizeof(loop_win_max));
-
- rdcc = 0;
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
- mfsdram(SDRAM_RTSR, temp);
- debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
- mfsdram(SDRAM_FCSR, temp);
- debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
-#endif
-
- putc(' ');
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- curr_win_min.rffd = 0;
- curr_win_max.rffd = 0;
- in_window = 0;
-
- for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC,
- rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass = short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcr_num */
-
- /* If this value passed update RFFD windows */
- if (pass && !in_window) { /* at the start of window */
- in_window = 1;
- curr_win_min.rffd = curr_win_max.rffd = rffd;
- curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
- mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
- } else if (!pass && in_window) { /* at end of window */
- in_window = 0;
- } else if (pass && in_window) { /* within the window */
- curr_win_max.rffd = rffd;
- curr_win_max.rqfd = rqfd;
- }
- /* else if (!pass && !in_window)
- skip - no pass, not currently in a window */
-
- if (in_window) {
- if ((curr_win_max.rffd - curr_win_min.rffd) >
- (best_win_max.rffd - best_win_min.rffd)) {
- best_win_min.rffd = curr_win_min.rffd;
- best_win_max.rffd = curr_win_max.rffd;
-
- best_win_min.rqfd = curr_win_min.rqfd;
- best_win_max.rqfd = curr_win_max.rqfd;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* RFDC.RFFD */
-
- /*
- * save-off the best window results of the RFDC.RFFD
- * for this RQDC.RQFD setting
- */
- /*
- * if (just ended RFDC.RFDC loop pass window) >
- * (prior RFDC.RFFD loop pass window)
- */
- if ((best_win_max.rffd - best_win_min.rffd) >
- (loop_win_max.rffd - loop_win_min.rffd)) {
- loop_win_min.rffd = best_win_min.rffd;
- loop_win_max.rffd = best_win_max.rffd;
- loop_win_min.rqfd = rqfd;
- loop_win_max.rqfd = rqfd;
- debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
- "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
- loop_win_min.rqfd, loop_win_max.rqfd,
- loop_win_min.rffd, loop_win_max.rffd);
- }
- } /* RQDC.RQFD */
-
- putc('\b');
-
- debug("\n");
-
- if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
- (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
- (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
- passed = 0;
- }
-
- /*
- * Need to program RQDC before RFDC.
- */
- debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
- debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
- rqfd_average = loop_win_max.rqfd;
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
- debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
- rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = loop_win_max.rffd - loop_win_min.rffd;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- cal->rffd_min = loop_win_min.rffd;
- cal->rffd_max = loop_win_max.rffd;
- }
-
- return (u32)passed;
-}
-
-#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-#endif
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
-#if defined(CONFIG_DDR_RQDC_START_VAL)
- SDRAM_RQDC_RQDE_ENABLE |
- SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
-#else
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
-#endif
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) |
- SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodB(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodB()
- *
- * Autocalibration Method B
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
- *
- * for (j = 0; j < Entire Feedback Range; j++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * FDBK_Valid_Window[j] = 1;
- * }
- * }
- *
- * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
- *
- * for (i = 0; i < Entire DQS Range; i++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1;
- * }
- * }
- *
- * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
- */
-/*-----------------------------------------------------------------------------+
-| DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 DQS_calibration_methodB(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- ulong rdcc;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- uint passed = 0;
-
- int in_window;
- u32 curr_win_min, curr_win_max;
- u32 best_win_min, best_win_max;
- u32 size = 0;
-
- /*------------------------------------------------------------------
- | Test to determine the best read clock delay tuning bits.
- |
- | Before the DDR controller can be used, the read clock delay needs to
- | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- | This value cannot be hardcoded into the program because it changes
- | depending on the board's setup and environment.
- | To do this, all delay values are tested to see if they
- | work or not. By doing this, you get groups of fails with groups of
- | passing values. The idea is to find the start and end of a passing
- | window and take the center of it to use as the read clock delay.
- |
- | A failure has to be seen first so that when we hit a pass, we know
- | that it is truely the start of the window. If we get passing values
- | to start off with, we don't know if we are at the start of the window
- |
- | The code assumes that a failure will always be found.
- | If a failure is not found, there is no easy way to get the middle
- | of the passing window. I guess we can pretty much pick any value
- | but some values will be better than others. Since the lowest speed
- | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- | from experimentation it is safe to say you will always have a failure
- +-----------------------------------------------------------------*/
-
- debug("\n\n");
-
- in_window = 0;
- rdcc = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) { /* start of passing window */
- in_window = 1;
- curr_win_min = curr_win_max = rffd;
- mfsdram(SDRAM_RDCC, rdcc); /* record this value */
- } else if (!pass && in_window) { /* end passing window */
- in_window = 0;
- } else if (pass && in_window) { /* within the passing window */
- curr_win_max = rffd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* for rffd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
- else
- size = best_win_max - best_win_min;
-
- debug("RFFD Min: 0x%x\n", best_win_min);
- debug("RFFD Max: 0x%x\n", best_win_max);
- rffd_average = ((best_win_min + best_win_max) / 2);
-
- cal->rffd_min = best_win_min;
- cal->rffd_max = best_win_max;
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- rffd = rffd_average;
- in_window = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
-
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) {
- in_window = 1;
- curr_win_min = curr_win_max = rqfd;
- } else if (!pass && in_window) {
- in_window = 0;
- } else if (pass && in_window) {
- curr_win_max = rqfd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- }
- passed = 1;
- }
- } /* for rqfd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
-
- debug("RQFD Min: 0x%x\n", best_win_min);
- debug("RQFD Max: 0x%x\n", best_win_max);
- rqfd_average = ((best_win_min + best_win_max) / 2);
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mfsdram(SDRAM_RFDC, rfdc_reg);
-
- /*
- * Need to program RQDC before RFDC. The value is read above.
- * That is the reason why auto cal not work.
- * See, comments below.
- */
- mtsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RFDC, rfdc_reg);
-
- debug("RQDC: 0x%08X\n", rqdc_reg);
- debug("RFDC: 0x%08X\n", rfdc_reg);
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = size;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- }
-
- return (uint)passed;
-}
-#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*
- * Default table for DDR auto-calibration of all
- * possible WRDTR and CLKTR values.
- * Table format is:
- * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
- *
- * Table is terminated with {-1, -1} value pair.
- *
- * Board vendors can specify their own board specific subset of
- * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
- * pairs via a board defined ddr_scan_option() function.
- */
-struct sdram_timing full_scan_options[] = {
- {0, 0}, {0, 1}, {0, 2}, {0, 3},
- {1, 0}, {1, 1}, {1, 2}, {1, 3},
- {2, 0}, {2, 1}, {2, 2}, {2, 3},
- {3, 0}, {3, 1}, {3, 2}, {3, 3},
- {4, 0}, {4, 1}, {4, 2}, {4, 3},
- {5, 0}, {5, 1}, {5, 2}, {5, 3},
- {6, 0}, {6, 1}, {6, 2}, {6, 3},
- {-1, -1}
-};
-
-/*---------------------------------------------------------------------------+
-| DQS_calibration.
-+----------------------------------------------------------------------------*/
-u32 DQS_autocalibration(void)
-{
- u32 wdtr;
- u32 clkp;
- u32 result = 0;
- u32 best_result = 0;
- u32 best_rdcc;
- struct ddrautocal ddrcal;
- struct autocal_clks tcal;
- ulong rfdc_reg;
- ulong rqdc_reg;
- u32 val;
- int verbose_lvl = 0;
- char *str;
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
- struct sdram_timing *scan_list;
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- int i;
- char tmp[64]; /* long enough for environment variables */
-#endif
-
- memset(&tcal, 0, sizeof(tcal));
-
- ddr_scan_option((ulong)full_scan_options);
-
- scan_list =
- (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
-
- mfsdram(SDRAM_MCOPT1, val);
- if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
- str = "ECC Auto calibration -";
- else
- str = "Auto calibration -";
-
- puts(str);
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- i = getenv_r("autocalib", tmp, sizeof(tmp));
- if (i < 0)
- strcpy(tmp, CONFIG_AUTOCALIB);
-
- if (strcmp(tmp, "final") == 0) {
- /* display the final autocalibration results only */
- verbose_lvl = 1;
- } else if (strcmp(tmp, "loop") == 0) {
- /* display summary autocalibration info per iteration */
- verbose_lvl = 2;
- } else if (strcmp(tmp, "display") == 0) {
- /* display full debug autocalibration window info. */
- verbose_lvl = 3;
- }
-#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
-
- best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
-
- while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
- wdtr = scan_list->wrdtr;
- clkp = scan_list->clktr;
-
- mfsdram(SDRAM_WRDTR, val);
- val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
- mtsdram(SDRAM_WRDTR, (val |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
-
- mtsdram(SDRAM_CLKTR, clkp << 30);
-
- relock_memory_DLL();
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
-#ifdef DEBUG
- debug("\n");
- debug("*** --------------\n");
- mfsdram(SDRAM_WRDTR, val);
- debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
- mfsdram(SDRAM_CLKTR, val);
- debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
-#endif
-
- debug("\n");
- if (verbose_lvl > 2) {
- printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
- printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
- }
-
- memset(&ddrcal, 0, sizeof(ddrcal));
-
- /*
- * DQS calibration.
- */
- /*
- * program_DQS_calibration_method[A|B]() returns 0 if no
- * passing RFDC.[RFFD] window is found or returns the size
- * of the best passing window; in the case of a found passing
- * window, the ddrcal will contain the values of the best
- * window RQDC.[RQFD] and RFDC.[RFFD].
- */
-
- /*
- * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
- * Default is methodB.
- * Defined the autocalibration method in the board specific
- * header file.
- * Please see include/configs/kilauea.h for an example for
- * a board specific implementation.
- */
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
- result = program_DQS_calibration_methodA(&ddrcal);
-#else
- result = program_DQS_calibration_methodB(&ddrcal);
-#endif
-
- sync();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- val = ddrcal.rdcc; /* RDCC from the best passing window */
-
- udelay(100);
-
- if (verbose_lvl > 1) {
- char *tstr;
- switch ((val >> 30)) {
- case 0:
- if (result != 0)
- tstr = "T1";
- else
- tstr = "N/A";
- break;
- case 1:
- tstr = "T2";
- break;
- case 2:
- tstr = "T3";
- break;
- case 3:
- tstr = "T4";
- break;
- default:
- tstr = "unknown";
- break;
- }
- printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
- "max-min(0x%04x)(0x%04x), RDCC: %s\n",
- wdtr, clkp, result, best_result,
- ddrcal.rffd_min, ddrcal.rffd_max, tstr);
- }
-
- /*
- * The DQS calibration "result" is either "0"
- * if no passing window was found, or is the
- * size of the RFFD passing window.
- */
- /*
- * want the lowest Read Sample Cycle Select
- */
- val = SDRAM_RDCC_RDSS_DECODE(val);
- debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
- val, best_rdcc);
-
- if ((result != 0) &&
- (val >= SDRAM_RDCC_RDSS_VAL(SDRAM_RDCC_RDSS_T2))) {
- if (((result == best_result) && (val < best_rdcc)) ||
- ((result > best_result) && (val <= best_rdcc))) {
- tcal.autocal.flags = 1;
- debug("*** (%d)(%d) result passed window "
- "size: 0x%08x, rqfd = 0x%08x, "
- "rffd = 0x%08x, rdcc = 0x%08x\n",
- wdtr, clkp, result, ddrcal.rqfd,
- ddrcal.rffd, ddrcal.rdcc);
-
- /*
- * Save the SDRAM_WRDTR and SDRAM_CLKTR
- * settings for the largest returned
- * RFFD passing window size.
- */
- best_rdcc = val;
- tcal.clocks.wrdtr = wdtr;
- tcal.clocks.clktr = clkp;
- tcal.clocks.rdcc = SDRAM_RDCC_RDSS_ENCODE(val);
- tcal.autocal.rqfd = ddrcal.rqfd;
- tcal.autocal.rffd = ddrcal.rffd;
- best_result = result;
-
- if (verbose_lvl > 2) {
- printf("** (%d)(%d) "
- "best result: 0x%04x\n",
- wdtr, clkp,
- best_result);
- printf("** (%d)(%d) "
- "best WRDTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.wrdtr);
- printf("** (%d)(%d) "
- "best CLKTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.clktr);
- printf("** (%d)(%d) "
- "best RQDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rqfd);
- printf("** (%d)(%d) "
- "best RFDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rffd);
- printf("** (%d)(%d) "
- "best RDCC: 0x%08x\n",
- wdtr, clkp,
- (u32)tcal.clocks.rdcc);
- mfsdram(SDRAM_RTSR, val);
- printf("** (%d)(%d) best "
- "loop RTSR: 0x%08x\n",
- wdtr, clkp, val);
- mfsdram(SDRAM_FCSR, val);
- printf("** (%d)(%d) best "
- "loop FCSR: 0x%08x\n",
- wdtr, clkp, val);
- }
- }
- } /* if ((result != 0) && (val >= (ddr_rdss_opt()))) */
- scan_list++;
- } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
-
- if (tcal.autocal.flags == 1) {
- if (verbose_lvl > 0) {
- printf("*** --------------\n");
- printf("*** best_result window size: %d\n",
- best_result);
- printf("*** best_result WRDTR: 0x%04x\n",
- tcal.clocks.wrdtr);
- printf("*** best_result CLKTR: 0x%04x\n",
- tcal.clocks.clktr);
- printf("*** best_result RQFD: 0x%04x\n",
- tcal.autocal.rqfd);
- printf("*** best_result RFFD: 0x%04x\n",
- tcal.autocal.rffd);
- printf("*** best_result RDCC: 0x%04x\n",
- tcal.clocks.rdcc);
- printf("*** --------------\n");
- printf("\n");
- }
-
- /*
- * if got best passing result window, then lock in the
- * best CLKTR, WRDTR, RQFD, and RFFD values
- */
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val &
- ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
- (tcal.clocks.wrdtr << 25)));
-
- mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
-
- relock_memory_DLL();
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg |
- SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
- rqdc_reg);
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg |
- SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
- rfdc_reg);
- mfsdram(SDRAM_RDCC, val);
- debug("*** SDRAM_RDCC 0x%08x\n", val);
- } else {
- /*
- * no valid windows were found
- */
- printf("DQS memory calibration window can not be determined, "
- "terminating u-boot.\n");
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang();
- }
-
- blank_string(strlen(str));
-
- return 0;
-}
-#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-u32 DQS_autocalibration(void)
-{
- return 0;
-}
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
deleted file mode 100644
index eed4534..0000000
--- a/cpu/ppc4xx/4xx_pci.c
+++ /dev/null
@@ -1,873 +0,0 @@
-/*-----------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of
- * the GNU General Public license version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
- *
- * File Name: 405gp_pci.c
- *
- * Function: Initialization code for the 405GP PCI Configuration regs.
- *
- * Author: Mark Game
- *
- * Change Activity-
- *
- * Date Description of Change BY
- * --------- --------------------- ---
- * 09-Sep-98 Created MCG
- * 02-Nov-98 Removed External arbiter selected message JWB
- * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB
- * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG
- * from (0 to n) to (1 to n).
- * 17-May-99 Port to Walnut JWB
- * 17-Jun-99 Updated for VGA support JWB
- * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB
- * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG
- * target latency timer values are not supported).
- * Should be fixed in pass 2.
- * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB
- * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
- * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
- * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
- * really required after a reset since PMMxMAs are already
- * disabled but is a good practice nonetheless. JWB
- * 12-Jun-01 stefan.roese@esd-electronics.com
- * - PCI host/adapter handling reworked
- * 09-Jul-01 stefan.roese@esd-electronics.com
- * - PCI host now configures from device 0 (not 1) to max_dev,
- * (host configures itself)
- * - On CPCI-405 pci base address and size is generated from
- * SDRAM and FLASH size (CFG regs not used anymore)
- * - Some minor changes for CPCI-405-A (adapter version)
- * 14-Sep-01 stefan.roese@esd-electronics.com
- * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
- * 28-Sep-01 stefan.roese@esd-electronics.com
- * - Changed pci master configuration for linux compatibility
- * (no need for bios_fixup() anymore)
- * 26-Feb-02 stefan.roese@esd-electronics.com
- * - Bug fixed in pci configuration (Andrew May)
- * - Removed pci class code init for CPCI405 board
- * 15-May-02 stefan.roese@esd-electronics.com
- * - New vga device handling
- * 29-May-02 stefan.roese@esd-electronics.com
- * - PCI class code init added (if defined)
- *----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <command.h>
-#include <asm/4xx_pci.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#ifdef CONFIG_PCI
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-
-#if defined(CONFIG_PMC405)
-ushort pmc405_pci_subsys_deviceid(void);
-#endif
-
-/*#define DEBUG*/
-
-/*
- * Board-specific pci initialization
- * Platform code can reimplement pci_pre_init() if needed
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
-#if defined(CONFIG_405EP)
- /*
- * Enable the internal PCI arbiter by default.
- *
- * On 405EP CPUs the internal arbiter can be controlled
- * by the I2C strapping EEPROM. If you want to do so
- * or if you want to disable the arbiter pci_pre_init()
- * must be reimplemented without enabling the arbiter.
- * The arbiter is enabled in this place because of
- * compatibility reasons.
- */
- mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
-#endif /* CONFIG_405EP */
-
- return 1;
-}
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-int __is_pci_host(struct pci_controller *hose)
-{
-#if defined(CONFIG_405GP)
- if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
- return 1;
-#elif defined (CONFIG_405EP)
- if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
- return 1;
-#endif
- return 0;
-}
-int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
-
-/*-----------------------------------------------------------------------------+
- * pci_init. Initializes the 405GP PCI Configuration regs.
- *-----------------------------------------------------------------------------*/
-void pci_405gp_init(struct pci_controller *hose)
-{
- int i, reg_num = 0;
- bd_t *bd = gd->bd;
-
- unsigned short temp_short;
- unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- char *ptmla_str, *ptmms_str;
-#endif
- unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
- unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
-#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
- unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
- unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
- unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
- unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
-#else
- unsigned long pmmla[3] = {0x80000000, 0,0};
- unsigned long pmmma[3] = {0xC0000001, 0,0};
- unsigned long pmmpcila[3] = {0x80000000, 0,0};
- unsigned long pmmpciha[3] = {0x00000000, 0,0};
-#endif
-#ifdef CONFIG_PCI_PNP
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- char *s;
-#endif
-#endif
-
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- ptmla_str = getenv("ptm1la");
- ptmms_str = getenv("ptm1ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
- }
-
- ptmla_str = getenv("ptm2la");
- ptmms_str = getenv("ptm2ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
- }
-#endif
-
- /*
- * Register the hose
- */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- MIN_PCI_PCI_IOADDR,
- MIN_PLB_PCI_IOADDR,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00800000,
- 0xe8800000,
- 0x03800000,
- PCI_REGION_IO);
-
- reg_num = 2;
-
- /* Memory spaces */
- for (i=0; i<2; i++)
- if (ptmms[i] & 1)
- {
- if (!i) hose->pci_fb = hose->regions + reg_num;
-
- pci_set_region(hose->regions + reg_num++,
- ptmpcila[i], ptmla[i],
- ~(ptmms[i] & 0xfffff000) + 1,
- PCI_REGION_MEM |
- PCI_REGION_SYS_MEMORY);
- }
-
- /* PCI memory spaces */
- for (i=0; i<3; i++)
- if (pmmma[i] & 1)
- {
- pci_set_region(hose->regions + reg_num++,
- pmmpcila[i], pmmla[i],
- ~(pmmma[i] & 0xfffff000) + 1,
- PCI_REGION_MEM);
- }
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose,
- PCICFGADR,
- PCICFGDATA);
-
- if (hose->pci_fb)
- pciauto_region_init(hose->pci_fb);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
-
- pci_register_hose(hose);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Master configuration.
- * Map one 512 MB range of PLB/processor addresses to PCI memory space.
- * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
- * Use byte reversed out routines to handle endianess.
- *--------------------------------------------------------------------------*/
- out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
- out32r(PMM0LA, pmmla[0]);
- out32r(PMM0PCILA, pmmpcila[0]);
- out32r(PMM0PCIHA, pmmpciha[0]);
- out32r(PMM0MA, pmmma[0]);
-
- /*--------------------------------------------------------------------------+
- * PMM1 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM1MA, (pmmma[1]&~0x1));
- out32r(PMM1LA, pmmla[1]);
- out32r(PMM1PCILA, pmmpcila[1]);
- out32r(PMM1PCIHA, pmmpciha[1]);
- out32r(PMM1MA, pmmma[1]);
-
- /*--------------------------------------------------------------------------+
- * PMM2 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM2MA, (pmmma[2]&~0x1));
- out32r(PMM2LA, pmmla[2]);
- out32r(PMM2PCILA, pmmpcila[2]);
- out32r(PMM2PCIHA, pmmpciha[2]);
- out32r(PMM2MA, pmmma[2]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM1)
- * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
- *--------------------------------------------------------------------------*/
- out32r(PTM1LA, ptmla[0]); /* insert address */
- out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM2)
- *--------------------------------------------------------------------------*/
- out32r(PTM2LA, ptmla[1]); /* insert address */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
-
- if (ptmms[1] == 0)
- {
- out32r(PTM2MS, 0x00000001); /* set enable bit */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
- out32r(PTM2MS, 0x00000000); /* disable */
- }
- else
- {
- out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */
- }
-
- /*
- * Insert Subsystem Vendor and Device ID
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-#ifdef CONFIG_CPCI405
- if (is_pci_host(hose))
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
- else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
-#else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-#endif
-
- /*
- * Insert Class-code
- */
-#ifdef CONFIG_SYS_PCI_CLASSCODE
- pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
-#endif /* CONFIG_SYS_PCI_CLASSCODE */
-
- /*--------------------------------------------------------------------------+
- * If PCI speed = 66MHz, set 66MHz capable bit.
- *--------------------------------------------------------------------------*/
- if (bd->bi_pci_busfreq >= 66000000) {
- pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
- pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
- }
-
-#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
- /*--------------------------------------------------------------------------+
- * Write the 405GP PCI Configuration regs.
- * Enable 405GP to be a master on the PCI bus (PMM).
- * Enable 405GP to act as a PCI memory target (PTM).
- *--------------------------------------------------------------------------*/
- pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- }
-#endif
-
-#if defined(CONFIG_405EP)
- /*
- * on ppc405ep vendor/device id is not set
- * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
- * are the correct values.
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
- pci_write_config_word(PCIDEVID_405GP,
- PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
-#endif
-
- /*
- * Set HCE bit (Host Configuration Enabled)
- */
- pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
-
-#ifdef CONFIG_PCI_PNP
- /*--------------------------------------------------------------------------+
- * Scan the PCI bus and configure devices found.
- *--------------------------------------------------------------------------*/
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
-#endif /* CONFIG_PCI_PNP */
-
-}
-
-/*
- * drivers/pci/pci.c skips every host bridge but the 405GP since it could
- * be set as an Adapter.
- *
- * I (Andrew May) don't know what we should do here, but I don't want
- * the auto setup of a PCI device disabling what is done pci_405gp_init
- * as has happened before.
- */
-void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
-#ifdef DEBUG
- printf("405gp_setup_bridge\n");
-#endif
-}
-
-/*
- *
- */
-
-void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char int_line = 0xff;
-
- /*
- * Write pci interrupt line register (cpci405 specific)
- */
- switch (PCI_DEV(dev) & 0x03)
- {
- case 0:
- int_line = 27 + 2;
- break;
- case 1:
- int_line = 27 + 3;
- break;
- case 2:
- int_line = 27 + 0;
- break;
- case 3:
- int_line = 27 + 1;
- break;
- }
-
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-}
-
-void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
- unsigned int cmdstat = 0;
-
- pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
-
- /* always enable io space on vga boards */
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
- cmdstat |= PCI_COMMAND_IO;
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
-}
-
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
-
-/*
- *As is these functs get called out of flash Not a horrible
- *thing, but something to keep in mind. (no statics?)
- */
-static struct pci_config_table pci_405gp_config_table[] = {
-/*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
- {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
-#endif
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- { }
-};
-
-static struct pci_controller hose = {
- fixup_irq: pci_405gp_fixup_irq,
- config_table: pci_405gp_config_table,
-};
-
-void pci_init_board(void)
-{
- /*we want the ptrs to RAM not flash (ie don't use init list)*/
- hose.fixup_irq = pci_405gp_fixup_irq;
- hose.config_table = pci_405gp_config_table;
- pci_405gp_init(&hose);
-}
-
-#endif
-
-#endif /* CONFIG_405GP */
-
-/*-----------------------------------------------------------------------------+
- * CONFIG_440
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440)
-
-static struct pci_controller ppc440_hose = {0};
-
-/*
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- * Weak default implementation: "Normal" boards implement the PCI
- * host functionality. This can be overridden for PCI adapter boards.
- */
-int __is_pci_host(struct pci_controller *hose)
-{
- return 1;
-}
-int is_pci_host(struct pci_controller *hose)
- __attribute__((weak, alias("__is_pci_host")));
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX)
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-/*
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- */
-void __pci_target_init(struct pci_controller *hose)
-{
- /*
- * Set up Direct MMIO registers
- */
-
- /*
- * PowerPC440 EP PCI Master configuration.
- * Map one 1Gig range of PLB/processor addresses to PCI memory space.
- * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
- * Use byte reversed out routines to handle endianess.
- * Make this region non-prefetchable.
- */
- /* PMM0 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM0MA, 0x00000000);
- /* PMM0 Local Address */
- out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI Low Address */
- out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI High Address */
- out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
-
- /* PMM1 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM1MA, 0x00000000);
- /* PMM1 Local Address */
- out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI Low Address */
- out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI High Address */
- out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
-
- out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */
- out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */
-
- /*
- * Set up Configuration registers
- */
-
- /* Program the board's subsystem id/vendor id */
- pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CONFIG_SYS_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
-
- /* Configure command register as bus master */
- pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
- /* 240nS PCI clock */
- pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
- /* No error reporting */
- pci_write_config_word(0, PCI_ERREN, 0);
-
- pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-/*
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- *
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
- u32 reg;
-
- /*
- * Set priority for all PLB3 devices to 0.
- * Set PLB3 arbiter to fair mode.
- */
- mfsdr(SD0_AMP1, reg);
- mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB3_ACR);
- mtdcr(PLB3_ACR, reg | 0x80000000);
-
- /*
- * Set priority for all PLB4 devices to 0.
- */
- mfsdr(SD0_AMP0, reg);
- mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB4_ACR) | 0xa0000000;
- mtdcr(PLB4_ACR, reg);
-
- /*
- * Set Nebula PLB4 arbiter to fair mode.
- */
- /* Segment0 */
- reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
- reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
- reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
- reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
- mtdcr(PLB0_ACR, reg);
-
- /* Segment1 */
- reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
- reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
- reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
- reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
- mtdcr(PLB1_ACR, reg);
-
-#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
- hose->fixup_irq = board_pci_fixup_irq;
-#endif
-
- return 1;
-}
-
-#else /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void __pci_target_init(struct pci_controller * hose)
-{
- /*
- * Disable everything
- */
- out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
- out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
-
- /*
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
- * strapping options do not support sizes such as 128/256 MB.
- */
- out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
- out_le32((void *)PCIL0_PIM0LAH, 0);
- out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out_le32((void *)PCIL0_BAR0, 0);
-
- /*
- * Program the board's subsystem id/vendor id
- */
- out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
- out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-
- out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
- PCI_COMMAND_MEMORY);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int __pci_pre_init(struct pci_controller *hose)
-{
- /*
- * This board is always configured as the host & requires the
- * PCI arbiter to be enabled.
- */
- if (!pci_arbiter_enabled()) {
- printf("PCI: PCI Arbiter disabled!\n");
- return 0;
- }
-
- return 1;
-}
-
-#endif /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose)
- __attribute__((weak, alias("__pci_target_init")));
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
-void __pci_master_init(struct pci_controller *hose)
-{
- u16 reg;
-
- /*
- * Write the PowerPC440 EP PCI Configuration regs.
- * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- * Enable PowerPC440 EP to act as a PCI memory target (PTM).
- */
- pci_read_config_word(0, PCI_COMMAND, &reg);
- pci_write_config_word(0, PCI_COMMAND, reg |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-void pci_master_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_master_init")));
-#endif /* CONFIG_SYS_PCI_MASTER_INIT */
-
-int pci_440_init (struct pci_controller *hose)
-{
- int reg_num = 0;
-
-#ifndef CONFIG_DISABLE_PISE_TEST
- /*--------------------------------------------------------------------------+
- * The PCI initialization sequence enable bit must be set ... if not abort
- * pci setup since updating the bit requires chip reset.
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long strap;
-
- mfsdr(SDR0_SDSTP1,strap);
- if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
- printf("PCI: SDR0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#elif defined(CONFIG_440GP)
- unsigned long strap;
-
- strap = mfdcr(CPC0_STRP1);
- if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
- printf("PCI: CPC0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#endif
-#endif /* CONFIG_DISABLE_PISE_TEST */
-
- /*--------------------------------------------------------------------------+
- * PCI controller init
- *--------------------------------------------------------------------------*/
- hose->first_busno = 0;
- hose->last_busno = 0;
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00000000,
- PCIL0_IOBASE,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_SYS_PCI_TARGBASE,
- CONFIG_SYS_PCI_MEMBASE,
-#ifdef CONFIG_SYS_PCI_MEMSIZE
- CONFIG_SYS_PCI_MEMSIZE,
-#else
- 0x10000000,
-#endif
- PCI_REGION_MEM );
-
-#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
- defined(CONFIG_PCI_SYS_MEM_SIZE)
- /* System memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
-#endif
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-
- pci_register_hose( hose );
-
- /*--------------------------------------------------------------------------+
- * PCI target init
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
- pci_target_init(hose); /* Let board setup pci target */
-#else
- out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
- out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
-#elif defined(PCIL0_BRDGOPT1)
- out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI master init: default is one 256MB region for PCI memory:
- * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
- pci_master_init(hose); /* Let board setup pci master */
-#else
- out32r( PCIL0_POM0SA, 0 ); /* disable */
- out32r( PCIL0_POM1SA, 0 ); /* disable */
- out32r( PCIL0_POM2SA, 0 ); /* disable */
-#if defined(CONFIG_440SPE)
- out32r( PCIL0_POM0LAL, 0x10000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_POM0LAL, 0x20000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#else
- out32r( PCIL0_POM0LAL, 0x00000000 );
- out32r( PCIL0_POM0LAH, 0x00000003 );
-#endif
- out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
- out32r( PCIL0_POM0PCIAH, 0x00000000 );
- out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
- out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI host configuration -- we don't make any assumptions here ... the
- * _board_must_indicate_ what to do -- there's just too many runtime
- * scenarios in environments like cPCI, PPMC, etc. to make a determination
- * based on hard-coded values or state of arbiter enable.
- *--------------------------------------------------------------------------*/
- if (is_pci_host(hose)) {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
- out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
- return hose->last_busno;
-}
-
-void pci_init_board(void)
-{
- int busno;
-
- busno = pci_440_init (&ppc440_hose);
-#if (defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- !defined(CONFIG_PCI_DISABLE_PCIE)
- pcie_setup_hoses(busno + 1);
-#endif
-}
-
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_405EX)
-void pci_init_board(void)
-{
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- pcie_setup_hoses(0);
-}
-#endif /* CONFIG_405EX */
-
-#endif /* CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
deleted file mode 100644
index 10b58b7..0000000
--- a/cpu/ppc4xx/4xx_pcie.c
+++ /dev/null
@@ -1,1298 +0,0 @@
-/*
- * (C) Copyright 2006 - 2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <pci.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
-
-#include <asm/4xx_pcie.h>
-
-enum {
- PTYPE_ENDPOINT = 0x0,
- PTYPE_LEGACY_ENDPOINT = 0x1,
- PTYPE_ROOT_PORT = 0x4,
-
- LNKW_X1 = 0x1,
- LNKW_X4 = 0x4,
- LNKW_X8 = 0x8
-};
-
-static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
-
-/*
- * Per default, all cards are present, so we need to check if the
- * link comes up.
- */
-int __board_pcie_card_present(int port)
-{
- return 1;
-}
-int board_pcie_card_present(int port)
- __attribute__((weak, alias("__board_pcie_card_present")));
-
-/*
- * Some boards have runtime detection of the first and last PCIe
- * slot used, so let's provide weak default functions for the
- * common version.
- */
-int __board_pcie_first(void)
-{
- return 0;
-}
-int board_pcie_first(void)
- __attribute__((weak, alias("__board_pcie_first")));
-
-int __board_pcie_last(void)
-{
- return CONFIG_SYS_PCIE_NR_PORTS - 1;
-}
-int board_pcie_last(void)
- __attribute__((weak, alias("__board_pcie_last")));
-
-void __board_pcie_setup_port(int port, int rootpoint)
-{
- /* noting in this weak default implementation */
-}
-void board_pcie_setup_port(int port, int rootpoint)
- __attribute__((weak, alias("__board_pcie_setup_port")));
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
- int first = board_pcie_first();
- int last = board_pcie_last();
-
- /*
- * Assume we're called after the PCI(X) hose(s) are initialized,
- * which takes bus ID 0... and therefore start numbering PCIe's
- * from the next number.
- */
- bus = busno;
-
- for (i = first; i <= last; i++) {
- /*
- * Some boards (e.g. Katmai) can detects via hardware
- * if a PCIe card is plugged, so let's check this.
- */
- if (!board_pcie_card_present(i))
- continue;
-
- if (is_end_point(i)) {
- board_pcie_setup_port(i, 0);
- ret = ppc4xx_init_pcie_endport(i);
- } else {
- board_pcie_setup_port(i, 1);
- ret = ppc4xx_init_pcie_rootport(i);
- }
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
-
-static int validate_endpoint(struct pci_controller *hose)
-{
- if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
- return (is_end_point(0));
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
- return (is_end_point(1));
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
- return (is_end_point(2));
-#endif
-
- return 0;
-}
-
-static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
-{
- u8 *base = (u8*)hose->cfg_data;
-
- /* use local configuration space for the first bus */
- if (PCI_BUS(devfn) == 0) {
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
-#endif
- }
-
- return base;
-}
-
-static void pcie_dmer_disable(void)
-{
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
-#endif
-}
-
-static void pcie_dmer_enable(void)
-{
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
-#endif
-}
-
-static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 *val) {
-
- u8 *address;
- *val = 0;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * NOTICE: configuration space ranges are currenlty mapped only for
- * the first 16 buses, so such limit must be imposed. In case more
- * buses are required the TLB settings in board/amcc/<board>/init.S
- * need to be altered accordingly (one bus takes 1 MB of memory space).
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- /*
- * Only single device/single function is supported for the primary and
- * secondary buses of the 440SPe host bridge.
- */
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Reading from configuration space of non-existing device can
- * generate transaction errors. For the read duration we suppress
- * assertion of machine check exceptions to avoid those.
- */
- pcie_dmer_disable ();
-
- debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
- switch (len) {
- case 1:
- *val = in_8(hose->cfg_data + offset);
- break;
- case 2:
- *val = in_le16((u16 *)(hose->cfg_data + offset));
- break;
- default:
- *val = in_le32((u32*)(hose->cfg_data + offset));
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 val) {
-
- u8 *address;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * Same constraints as in pcie_read_config().
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Suppress MCK exceptions, similar to pcie_read_config()
- */
- pcie_dmer_disable ();
-
- switch (len) {
- case 1:
- out_8(hose->cfg_data + offset, val);
- break;
- case 2:
- out_le16((u16 *)(hose->cfg_data + offset), val);
- break;
- default:
- out_le32((u32 *)(hose->cfg_data + offset), val);
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 1, &v);
- *val = (u8)v;
- return rv;
-}
-
-int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 2, &v);
- *val = (u16)v;
- return rv;
-}
-
-int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 3, &v);
- *val = (u32)v;
- return rv;
-}
-
-int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,1,val);
-}
-
-int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
-}
-
-int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
-}
-
-#if defined(CONFIG_440SPE)
-static void ppc4xx_setup_utl(u32 port) {
-
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
- break;
-
- case 2:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
- out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066);
-}
-
-static int check_error(void)
-{
- u32 valPE0, valPE1, valPE2;
- int err = 0;
-
- /* SDR0_PEGPLLLCT1 reset */
- if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
- printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
-
- valPE0 = SDR_READ(PESDR0_RCSSET);
- valPE1 = SDR_READ(PESDR1_RCSSET);
- valPE2 = SDR_READ(PESDR2_RCSSET);
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & 0x01000000) ||
- !(valPE1 & 0x01000000) ||
- !(valPE2 & 0x01000000)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & 0x00010000) ||
- !(valPE1 & 0x00010000) ||
- !(valPE2 & 0x00010000)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & 0x00001000) ||
- (valPE1 & 0x00001000) ||
- (valPE2 & 0x00001000)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & 0x10000000) ||
- (valPE1 & 0x10000000) ||
- (valPE2 & 0x10000000)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & 0x00100000) ||
- (valPE1 & 0x00100000) ||
- (valPE2 & 0x00100000)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET shutdown */
- if ((valPE0 & 0x00000100) ||
- (valPE1 & 0x00000100) ||
- (valPE2 & 0x00000100)) {
- printf("PCIE: SDR0_PExRCSSET shutdown error\n");
- err = -1;
- }
- return err;
-}
-
-/*
- * Initialize PCI Express core
- */
-int ppc4xx_init_pcie(void)
-{
- int time_out = 20;
-
- /* Set PLL clock receiver to LVPECL */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
- if (check_error()) {
- printf("ERROR: failed to set PCIe reference clock receiver --"
- "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
-
- return -1;
- }
-
- /* Did resistance calibration work? */
- if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
- printf("ERROR: PCIe resistance calibration failed --"
- "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
-
- return -1;
- }
- /* De-assert reset of PCIe PLL, wait for lock */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
- udelay(300); /* 300 uS is maximum time lock should take */
-
- while (time_out) {
- if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
- time_out--;
- udelay(20); /* Wait 20 uS more if needed */
- } else
- break;
- }
- if (!time_out) {
- printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
- "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
-
- return -1;
- }
- return 0;
-}
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-static void ppc4xx_setup_utl(u32 port)
-{
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
- + 0x1000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
- out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
- out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
-}
-
-/*
- * TODO: double check PCI express SDR based on the latest user manual
- * Some registers specified here no longer exist.. has to be
- * updated based on the final EAS spec.
- */
-static int check_error(void)
-{
- u32 valPE0, valPE1;
- int err = 0;
-
- valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
- valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- return err;
-}
-
-/*
- * Initialize PCI Express core as described in User Manual
- * TODO: double check PE SDR PLL Register with the updated user manual.
- */
-int ppc4xx_init_pcie(void)
-{
- if (check_error())
- return -1;
-
- return 0;
-}
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX)
-static void ppc4xx_setup_utl(u32 port)
-{
- u32 utl_base;
-
- /*
- * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
-
- break;
- }
- utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
- out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
- out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
-
- out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
- out_be32((u32 *)(utl_base + PEUTL_RCSTA),
- in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
-}
-
-int ppc4xx_init_pcie(void)
-{
- /*
- * Nothing to do on 405EX
- */
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-/*
- * Board-specific pcie initialization
- * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
- */
-
-/*
- * Initialize various parts of the PCI Express core for our port:
- *
- * - Set as a root port and enable max width
- * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
- * - Set up UTL configuration.
- * - Increase SERDES drive strength to levels suggested by AMCC.
- * - De-assert RSTPYN, RSTDL and RSTGU.
- *
- * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
- * with default setting 0x11310000. The register has new fields,
- * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
- * hang.
- */
-#if defined(CONFIG_440SPE)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val = 1 << 24;
- u32 utlset1;
-
- if (rootport) {
- val = PTYPE_ROOT_PORT << 20;
- utlset1 = 0x21222222;
- } else {
- val = PTYPE_LEGACY_ENDPOINT << 20;
- utlset1 = 0x20222222;
- }
-
- if (port == 0)
- val |= LNKW_X8 << 12;
- else
- val |= LNKW_X4 << 12;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- if (!ppc440spe_revB())
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
- SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
- if (port == 0) {
- SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(1 << 24 | 1 << 16)) | 1 << 12);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
- u32 utlset1;
-
- if (rootport)
- val = PTYPE_ROOT_PORT << 20;
- else
- val = PTYPE_LEGACY_ENDPOINT << 20;
-
- if (port == 0) {
- val |= LNKW_X1 << 12;
- utlset1 = 0x20000000;
- } else {
- val |= LNKW_X4 << 12;
- utlset1 = 0x20101101;
- }
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
-
- switch (port) {
- case 0:
- SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR0_L0DRV, 0x00000130);
- SDR_WRITE(PESDR0_L0CLK, 0x00000006);
-
- SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
- break;
-
- case 1:
- SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L0DRV, 0x00000130);
- SDR_WRITE(PESDR1_L1DRV, 0x00000130);
- SDR_WRITE(PESDR1_L2DRV, 0x00000130);
- SDR_WRITE(PESDR1_L3DRV, 0x00000130);
- SDR_WRITE(PESDR1_L0CLK, 0x00000006);
- SDR_WRITE(PESDR1_L1CLK, 0x00000006);
- SDR_WRITE(PESDR1_L2CLK, 0x00000006);
- SDR_WRITE(PESDR1_L3CLK, 0x00000006);
-
- SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
- (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
-
- /* Poll for PHY reset */
- switch (port) {
- case 0:
- while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
- udelay(10);
- break;
- case 1:
- while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
- udelay(10);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
- PESDRx_RCSSET_RSTPYN);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_405EX)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
-
- if (rootport)
- val = 0x00401000;
- else
- val = 0x00101000;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
- SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
- SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
-
- /* Assert the PE0_PHY reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
- udelay(1000);
-
- /* deassert the PE0_hotreset */
- if (is_end_point(port))
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
- else
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
-
- /* poll for phy !reset */
- while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
- ;
-
- /* deassert the PE0_gpl_utl_reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
-
- if (port == 0)
- mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
- else
- mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
-
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-int ppc4xx_init_pcie_port_hw(int port, int rootport)
-__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
-
-/*
- * We map PCI Express configuration access into the 512MB regions
- *
- * NOTICE: revB is very strict about PLB real addressess and ranges to
- * be mapped for config space; it seems to only work with d_nnnn_nnnn
- * range (hangs the core upon config transaction attempts when set
- * otherwise) while revA uses c_nnnn_nnnn.
- *
- * For 440SPe revA:
- * PCIE0: 0xc_4000_0000
- * PCIE1: 0xc_8000_0000
- * PCIE2: 0xc_c000_0000
- *
- * For 440SPe revB:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- * PCIE2: 0xd_4000_0000
- *
- * For 405EX:
- * PCIE0: 0xa000_0000
- * PCIE1: 0xc000_0000
- *
- * For 460EX/GT:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- */
-static inline u64 ppc4xx_get_cfgaddr(int port)
-{
-#if defined(CONFIG_405EX)
- if (port == 0)
- return (u64)CONFIG_SYS_PCIE0_CFGBASE;
- else
- return (u64)CONFIG_SYS_PCIE1_CFGBASE;
-#endif
-#if defined(CONFIG_440SPE)
- if (ppc440spe_revB()) {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000d00000000ULL;
- case 1:
- return 0x0000000d20000000ULL;
- case 2:
- return 0x0000000d40000000ULL;
- }
- } else {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000c40000000ULL;
- case 1:
- return 0x0000000c80000000ULL;
- case 2:
- return 0x0000000cc0000000ULL;
- }
- }
-#endif
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- if (port == 0)
- return 0x0000000d00000000ULL;
- else
- return 0x0000000d20000000ULL;
-#endif
-}
-
-/*
- * 4xx boards as endpoint and root point setup
- * and
- * testing inbound and out bound windows
- *
- * 4xx boards can be plugged into another 4xx boards or you can get PCI-E
- * cable which can be used to setup loop back from one port to another port.
- * Please rememeber that unless there is a endpoint plugged in to root port it
- * will not initialize. It is the same in case of endpoint , unless there is
- * root port attached it will not initialize.
- *
- * In this release of software all the PCI-E ports are configured as either
- * endpoint or rootpoint.In future we will have support for selective ports
- * setup as endpoint and root point in single board.
- *
- * Once your board came up as root point , you can verify by reading
- * /proc/bus/pci/devices. Where you can see the configuration registers
- * of endpoint device attached to the port.
- *
- * Enpoint cofiguration can be verified by connecting 4xx board to any
- * host or another 4xx board. Then try to scan the device. In case of
- * linux use "lspci" or appripriate os command.
- *
- * How do I verify the inbound and out bound windows ? (4xx to 4xx)
- * in this configuration inbound and outbound windows are setup to access
- * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
- * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
- * This is waere your POM(PLB out bound memory window) mapped. then
- * read the data from other 4xx board's u-boot prompt at address
- * 0x9000 0000(SRAM). Data should match.
- * In case of inbound , write data to u-boot command prompt at 0xb000 0000
- * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
- * data at 0x9000 0000(SRAM).Data should match.
- */
-int ppc4xx_init_pcie_port(int port, int rootport)
-{
- static int core_init;
- volatile u32 val = 0;
- int attempts;
- u64 addr;
- u32 low, high;
-
- if (!core_init) {
- if (ppc4xx_init_pcie())
- return -1;
- ++core_init;
- }
-
- /*
- * Initialize various parts of the PCI Express core for our port
- */
- ppc4xx_init_pcie_port_hw(port, rootport);
-
- /*
- * Notice: the following delay has critical impact on device
- * initialization - if too short (<50ms) the link doesn't get up.
- */
- mdelay(100);
-
- val = SDR_READ(SDRN_PESDR_RCSSTS(port));
- if (val & (1 << 20)) {
- printf("PCIE%d: PGRST failed %08x\n", port, val);
- return -1;
- }
-
- /*
- * Verify link is up
- */
- val = SDR_READ(SDRN_PESDR_LOOP(port));
- if (!(val & 0x00001000)) {
- printf("PCIE%d: link is not up.\n", port);
- return -ENODEV;
- }
-
- /*
- * Setup UTL registers - but only on revA!
- * We use default settings for revB chip.
- */
- if (!ppc440spe_revB())
- ppc4xx_setup_utl(port);
-
- /*
- * We map PCI Express configuration access into the 512MB regions
- */
- addr = ppc4xx_get_cfgaddr(port);
- low = U64_TO_U32_LOW(addr);
- high = U64_TO_U32_HIGH(addr);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
- break;
- case 1:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
- break;
-#endif
- }
-
- /*
- * Check for VC0 active and assert RDY.
- */
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
- if (!(attempts--)) {
- printf("PCIE%d: VC0 not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
- mdelay(100);
-
- return 0;
-}
-
-int ppc4xx_init_pcie_rootport(int port)
-{
- return ppc4xx_init_pcie_port(port, 1);
-}
-
-int ppc4xx_init_pcie_endport(int port)
-{
- return ppc4xx_init_pcie_port(port, 0);
-}
-
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- volatile void *rmbase = NULL;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set bus numbers on our root port
- */
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
- in_le32(mbase + PECFG_POM0LAL));
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
- break;
-#endif
- }
-
- /* Set up 4GB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
- out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAL, 0);
- out_le32(mbase + PECFG_PIM0LAH, 0);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
- /* Set Device and Vendor Id */
- out_le16(mbase + 0x200, 0xaaa0 + port);
- out_le16(mbase + 0x202, 0xbed0 + port);
-
- /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
- out_le32(mbase + 0x208, 0x06040001);
-
- printf("PCIE%d: successfully set as root-complex\n", port);
-}
-
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- int attempts = 0;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if defined(CONFIG_SYS_PCIE2_CFGBASE)
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
- out_le32(mbase + PECFG_POM0LAL, 0x00001000);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#endif
- }
-
- /* Set up 64MB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
- out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
-
- /* Setup BAR0 */
- out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
-
- /* Disable BAR1 & BAR2 */
- out_le32(mbase + PECFG_BAR1MPA, 0);
- out_le32(mbase + PECFG_BAR2HMPA, 0);
- out_le32(mbase + PECFG_BAR2LMPA, 0);
-
- out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
- out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
-
- /* Set Class Code to Processor/PPC */
- out_le32(mbase + 0x208, 0x0b200001);
-
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
- if (!(attempts--)) {
- printf("PCIE%d: BME not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
-
- printf("PCIE%d: successfully set as endpoint\n", port);
-
- return 0;
-}
-#endif /* CONFIG_440SPE && CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
deleted file mode 100644
index 8de6542..0000000
--- a/cpu/ppc4xx/4xx_uart.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-#include <ppc4xx.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-#include <malloc.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_440)
-
-#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
-#else
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
-#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_440GP)
-#define CR0_MASK 0x3fff0000
-#define CR0_EXTCLK_ENA 0x00600000
-#define CR0_UDIV_POS 16
-#define UDIV_SUBTRACT 1
-#define UART0_SDR CPC0_CR0
-#define MFREG(a, d) d = mfdcr(a)
-#define MTREG(a, d) mtdcr(a, d)
-#else /* #if defined(CONFIG_440GP) */
-/* all other 440 PPC's access clock divider via sdr register */
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_SDR SDR0_UART2
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART3_SDR SDR0_UART3
-#endif
-#define MFREG(a, d) mfsdr(a, d)
-#define MTREG(a, d) mtsdr(a, d)
-#endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define UCR0_MASK 0x0000007f
-#define UCR1_MASK 0x00007f00
-#define UCR0_UDIV_POS 0
-#define UCR1_UDIV_POS 8
-#define UDIV_MAX 127
-#elif defined(CONFIG_405EX)
-#define UART0_BASE 0xef600200
-#define UART1_BASE 0xef600300
-#define CR0_MASK 0x000000ff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#else /* CONFIG_405GP || CONFIG_405CR */
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define CR0_MASK 0x00001fff
-#define CR0_EXTCLK_ENA 0x000000c0
-#define CR0_UDIV_POS 1
-#define UDIV_MAX 32
-#endif
-
-/* using serial port 0 or 1 as U-Boot console ? */
-#if defined(CONFIG_UART1_CONSOLE)
-#define ACTING_UART0_BASE UART1_BASE
-#define ACTING_UART1_BASE UART0_BASE
-#else
-#define ACTING_UART0_BASE UART0_BASE
-#define ACTING_UART1_BASE UART1_BASE
-#endif
-
-#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-#error "External serial clock not supported on AMCC PPC405EP!"
-#endif
-
-#define UART_RBR 0x00
-#define UART_THR 0x00
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRDataReady1 0x01
-#define asyncLSROverrunError1 0x02
-#define asyncLSRParityError1 0x04
-#define asyncLSRFramingError1 0x08
-#define asyncLSRBreakInterrupt1 0x10
-#define asyncLSRTxHoldEmpty1 0x20
-#define asyncLSRTxShiftEmpty1 0x40
-#define asyncLSRRxFifoError1 0x80
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-/*-----------------------------------------------------------------------------+
- | Fifo
- +-----------------------------------------------------------------------------*/
-typedef struct {
- char *rx_buffer;
- ulong rx_put;
- ulong rx_get;
-} serial_buffer_t;
-
-volatile static serial_buffer_t buf_info;
-#endif
-
-static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
-{
- PPC4xx_SYS_INFO sys_info;
- u8 val;
-
- get_sys_info(&sys_info);
-
- /* Correct UART frequency in bd-info struct now that
- * the UART divisor is available
- */
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
-#else
- gd->uart_clk = sys_info.freqUART / udiv;
-#endif
-
- out_8((u8 *)base + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)base + UART_DLL, bdiv); /* set baudrate divisor */
- out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
- out_8((u8 *)base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out_8((u8 *)base + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)base + UART_LSR); /* clear line status */
- val = in_8((u8 *)base + UART_RBR); /* read receive buffer */
- out_8((u8 *)base + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)base + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
- !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
-
- get_sys_info(&sysinfo);
-
- udiv = 32; /* Assume lowest possible serial clk */
- div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
- umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
- diff = 32; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (32) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 32; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- *pbdiv = div / udiv;
-}
-
-#elif defined(CONFIG_405EZ)
-
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
- unsigned long plloutb;
- unsigned long cpr_pllc;
- u32 reg;
-
- /* check the pll feedback source */
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- get_sys_info(&sysinfo);
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
- sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
- udiv = 256; /* Assume lowest possible serial clk */
- div = plloutb / (16 * baudrate); /* total divisor */
- umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
- diff = 256; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (256) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 256; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- mfcpr(CPC0_PERD0, reg);
- reg &= ~0x0000ffff;
- reg |= ((udiv - 0) << 8) | (udiv - 0);
- mtcpr(CPC0_PERD0, reg);
- *pbdiv = div / udiv;
-}
-#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#if defined(CONFIG_440)
-int serial_init_dev(unsigned long base)
-{
- unsigned long reg;
- unsigned long udiv;
- unsigned short bdiv;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- unsigned long tmp;
-#endif
-
- MFREG(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- /* For 440, the cpu clock is on divider chain A, UART on divider
- * chain B ... so cpu clock is irrelevant. Get the "optimized"
- * values that are subject to the 1/2 opb clock constraint
- */
- serial_divs (gd->baudrate, &udiv, &bdiv);
-#endif
-
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- MTREG(UART0_SDR, reg);
-#if defined(UART1_SDR)
- MTREG(UART1_SDR, reg);
-#endif
-#if defined(UART2_SDR)
- MTREG(UART2_SDR, reg);
-#endif
-#if defined(UART3_SDR)
- MTREG(UART3_SDR, reg);
-#endif
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#else /* !defined(CONFIG_440) */
-
-int serial_init_dev (unsigned long base)
-{
- unsigned long reg;
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CONFIG_405EX
- clk = tmp = 0;
- mfsdr(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- serial_divs(gd->baudrate, &udiv, &bdiv);
-#endif
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- mtsdr(UART0_SDR, reg);
-
-#if defined(UART1_SDR)
- mtsdr(UART1_SDR, reg);
-#endif
-
-#elif defined(CONFIG_405EZ)
- serial_divs(gd->baudrate, &udiv, &bdiv);
- clk = tmp = reg = 0;
-#else
-#ifdef CONFIG_405EP
- reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
- clk = gd->cpu_clk;
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
- reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
- reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_UCR, reg);
-#else /* CONFIG_405EP */
- reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
- udiv = 1;
- reg |= CR0_EXTCLK_ENA;
-#else
- clk = gd->cpu_clk;
-#ifdef CONFIG_SYS_405_UART_ERRATA_59
- udiv = 31; /* Errata 59: stuck at 31 */
-#else
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
-#endif
-#endif
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_CR0, reg);
-#endif /* CONFIG_405EP */
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* CONFIG_405EX */
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#endif /* if defined(CONFIG_440) */
-
-void serial_setbrg_dev(unsigned long base)
-{
- serial_init_dev(base);
-}
-
-void serial_putc_dev(unsigned long base, const char c)
-{
- int i;
-
- if (c == '\n')
- serial_putc_dev(base, '\r');
-
- /* check THRE bit, wait for transmiter available */
- for (i = 1; i < 3500; i++) {
- if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
- break;
- udelay (100);
- }
-
- out_8((u8 *)base + UART_THR, c); /* put character out */
-}
-
-void serial_puts_dev (unsigned long base, const char *s)
-{
- while (*s)
- serial_putc_dev (base, *s++);
-}
-
-int serial_getc_dev (unsigned long base)
-{
- unsigned char status = 0;
-
- while (1) {
-#if defined(CONFIG_HW_WATCHDOG)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
-#endif /* CONFIG_HW_WATCHDOG */
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)base));
-}
-
-int serial_tstc_dev (unsigned long base)
-{
- unsigned char status;
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- return (1);
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-
-void serial_isr (void *arg)
-{
- int space;
- int c;
- const int rx_get = buf_info.rx_get;
- int rx_put = buf_info.rx_put;
-
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- while (serial_tstc_dev (ACTING_UART0_BASE)) {
- c = serial_getc_dev (ACTING_UART0_BASE);
- if (space) {
- buf_info.rx_buffer[rx_put++] = c;
- space--;
- }
- if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_put = 0;
- if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
- /* Stop flow by setting RTS inactive */
- out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
- (0xFF ^ 0x02));
- }
- }
- buf_info.rx_put = rx_put;
-}
-
-void serial_buffered_init (void)
-{
- serial_puts ("Switching to interrupt driven serial input mode.\n");
- buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
- buf_info.rx_put = 0;
- buf_info.rx_get = 0;
-
- if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
- serial_puts ("Check CTS signal present on serial port: OK.\n");
- else
- serial_puts ("WARNING: CTS signal not present on serial port.\n");
-
- irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
- serial_isr /*interrupt_handler_t *handler */ ,
- (void *) &buf_info /*void *arg */ );
-
- /* Enable "RX Data Available" Interrupt on UART */
- out_8(ACTING_UART0_BASE + UART_IER, 0x01);
- /* Set DTR active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
- out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
-}
-
-void serial_buffered_putc (const char c)
-{
- /* Wait for CTS */
-#if defined(CONFIG_HW_WATCHDOG)
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
- WATCHDOG_RESET ();
-#else
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
-#endif
- serial_putc (c);
-}
-
-void serial_buffered_puts (const char *s)
-{
- serial_puts (s);
-}
-
-int serial_buffered_getc (void)
-{
- int space;
- int c;
- int rx_get = buf_info.rx_get;
- int rx_put;
-
-#if defined(CONFIG_HW_WATCHDOG)
- while (rx_get == buf_info.rx_put)
- WATCHDOG_RESET ();
-#else
- while (rx_get == buf_info.rx_put);
-#endif
- c = buf_info.rx_buffer[rx_get++];
- if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_get = 0;
- buf_info.rx_get = rx_get;
-
- rx_put = buf_info.rx_put;
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- }
-
- return c;
-}
-
-int serial_buffered_tstc (void)
-{
- return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
-}
-
-#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-
-#if defined(CONFIG_CMD_KGDB)
-/*
- AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
- number 0 or number 1
- - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
- configuration has been already done
- - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
- configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
-*/
-#if (CONFIG_KGDB_SER_INDEX & 2)
-void kgdb_serial_init (void)
-{
- u8 val;
- u16 br_reg;
-
- get_clocks ();
- br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
- 5) / 10;
- /*
- * Init onboard 16550 UART
- */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
- out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR); /* clear line status */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
- out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-void putDebugChar (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- out_8((u8 *)ACTING_UART1_BASE + UART_THR, c); /* put character out */
-
- /* check THRE bit, wait for transfer done */
- while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
-}
-
-void putDebugStr (const char *s)
-{
- while (*s)
- serial_putc (*s++);
-}
-
-int getDebugChar (void)
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & (asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-
-#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
-
-void kgdb_serial_init (void)
-{
- serial_printf ("[on serial] ");
-}
-
-void putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int getDebugChar (void)
-{
- return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif
-
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial0_init(void)
-{
- return (serial_init_dev(UART0_BASE));
-}
-
-int serial1_init(void)
-{
- return (serial_init_dev(UART1_BASE));
-}
-
-void serial0_setbrg (void)
-{
- serial_setbrg_dev(UART0_BASE);
-}
-
-void serial1_setbrg (void)
-{
- serial_setbrg_dev(UART1_BASE);
-}
-
-void serial0_putc(const char c)
-{
- serial_putc_dev(UART0_BASE,c);
-}
-
-void serial1_putc(const char c)
-{
- serial_putc_dev(UART1_BASE, c);
-}
-
-void serial0_puts(const char *s)
-{
- serial_puts_dev(UART0_BASE, s);
-}
-
-void serial1_puts(const char *s)
-{
- serial_puts_dev(UART1_BASE, s);
-}
-
-int serial0_getc(void)
-{
- return(serial_getc_dev(UART0_BASE));
-}
-
-int serial1_getc(void)
-{
- return(serial_getc_dev(UART1_BASE));
-}
-
-int serial0_tstc(void)
-{
- return (serial_tstc_dev(UART0_BASE));
-}
-
-int serial1_tstc(void)
-{
- return (serial_tstc_dev(UART1_BASE));
-}
-
-struct serial_device serial0_device =
-{
- "serial0",
- "UART0",
- serial0_init,
- serial0_setbrg,
- serial0_getc,
- serial0_tstc,
- serial0_putc,
- serial0_puts,
-};
-
-struct serial_device serial1_device =
-{
- "serial1",
- "UART1",
- serial1_init,
- serial1_setbrg,
- serial1_getc,
- serial1_tstc,
- serial1_putc,
- serial1_puts,
-};
-#else
-/*
- * Wrapper functions
- */
-int serial_init(void)
-{
- return serial_init_dev(ACTING_UART0_BASE);
-}
-
-void serial_setbrg(void)
-{
- serial_setbrg_dev(ACTING_UART0_BASE);
-}
-
-void serial_putc(const char c)
-{
- serial_putc_dev(ACTING_UART0_BASE, c);
-}
-
-void serial_puts(const char *s)
-{
- serial_puts_dev(ACTING_UART0_BASE, s);
-}
-
-int serial_getc(void)
-{
- return serial_getc_dev(ACTING_UART0_BASE);
-}
-
-int serial_tstc(void)
-{
- return serial_tstc_dev(ACTING_UART0_BASE);
-}
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* CONFIG_405GP || CONFIG_405CR */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
deleted file mode 100644
index 88d53fb..0000000
--- a/cpu/ppc4xx/Makefile
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START := resetvec.o
-START += start.o
-
-SOBJS := cache.o
-SOBJS += dcr.o
-SOBJS += kgdb.o
-
-COBJS := 40x_spd_sdram.o
-
-COBJS += 44x_spd_ddr.o
-COBJS += 44x_spd_ddr2.o
-ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
-COBJS += 4xx_ibm_ddr2_autocalib.o
-endif
-COBJS += 4xx_pci.o
-COBJS += 4xx_pcie.o
-COBJS += bedbug_405.o
-ifdef CONFIG_CMD_CHIP_CONFIG
-COBJS += cmd_chip_config.o
-endif
-COBJS += commproc.o
-COBJS += cpu.o
-COBJS += cpu_init.o
-COBJS += denali_data_eye.o
-COBJS += denali_spd_ddr2.o
-COBJS += ecc.o
-COBJS += fdt.o
-COBJS += interrupts.o
-COBJS += iop480_uart.o
-ifdef CONFIG_CMD_REGINFO
-COBJS += reginfo.o
-endif
-COBJS += sdram.o
-COBJS += speed.o
-COBJS += tlb.o
-COBJS += traps.o
-COBJS += usb.o
-COBJS += usb_ohci.o
-COBJS += usbdev.o
-ifndef CONFIG_XILINX_440
-COBJS += 4xx_uart.o
-COBJS += gpio.o
-COBJS += miiphy.o
-COBJS += uic.o
-else
-COBJS += xilinx_irq.o
-endif
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
deleted file mode 100644
index ef11cb6..0000000
--- a/cpu/ppc4xx/bedbug_405.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Bedbug Functions specific to the PPC405 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/type.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
-
-#define MAX_BREAK_POINTS 4
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug405_init __P ((void));
-void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
-void bedbug405_break_isr __P ((struct pt_regs *));
-int bedbug405_find_empty __P ((void));
-int bedbug405_set __P ((int, unsigned long));
-int bedbug405_clear __P ((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug405_init (void)
-{
- int i;
-
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug405_do_break;
- bug_ctx.break_isr = bedbug405_break_isr;
- bug_ctx.find_empty = bedbug405_find_empty;
- bug_ctx.set = bedbug405_set;
- bug_ctx.clear = bedbug405_clear;
-
- for (i = 1; i <= MAX_BREAK_POINTS; ++i)
- (*bug_ctx.clear) (i);
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 405. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
-
- /* -------------------------------------------------- */
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if (strcmp (argv[1], "off") == 0) {
- if (bug_ctx.hw_debug_enabled == 0) {
- printf ("No breakpoints enabled\n");
- return;
- }
-
- which_bp = simple_strtoul (argv[2], NULL, 10);
-
- if (bug_ctx.clear)
- (*bug_ctx.clear) (which_bp);
-
- printf ("Breakpoint %d removed\n", which_bp);
- return;
- }
-
- /* Show a list of breakpoints */
-
- if (strcmp (argv[1], "show") == 0) {
- for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {
-
- switch (which_bp) {
- case 1:
- addr = GET_IAC1 ();
- break;
- case 2:
- addr = GET_IAC2 ();
- break;
- case 3:
- addr = GET_IAC3 ();
- break;
- case 4:
- addr = GET_IAC4 ();
- break;
- }
-
- printf ("Breakpoint [%d]: ", which_bp);
- if (addr == 0)
- printf ("NOT SET\n");
- else
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
- F_RADHEX);
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if (!isdigit (argv[1][0])) {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;
-
- if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
- printf ("Breakpoint [%d]: ", which_bp);
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
- }
-
- return;
-} /* bedbug405_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug405_break_isr (struct pt_regs *regs)
-{
- unsigned long dbsr_val; /* Value of the DBSR */
- unsigned long addr = 0; /* Address stopped at */
-
- /* -------------------------------------------------- */
-
- dbsr_val = GET_DBSR ();
-
- if (dbsr_val & DBSR_IA1) {
- bug_ctx.current_bp = 1;
- addr = GET_IAC1 ();
- SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA2) {
- bug_ctx.current_bp = 2;
- addr = GET_IAC2 ();
- SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA3) {
- bug_ctx.current_bp = 3;
- addr = GET_IAC3 ();
- SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA4) {
- bug_ctx.current_bp = 4;
- addr = GET_IAC4 ();
- SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
- }
-
- bedbug_main_loop (addr, regs);
- return;
-} /* bedbug405_break_isr */
-
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug405_find_empty (void)
-{
- /* -------------------------------------------------- */
-
- if (GET_IAC1 () == 0)
- return 1;
-
- if (GET_IAC2 () == 0)
- return 2;
-
- if (GET_IAC3 () == 0)
- return 3;
-
- if (GET_IAC4 () == 0)
- return 4;
-
- return 0;
-} /* bedbug405_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_set (int which_bp, unsigned long addr)
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if ((bug_ctx.find_empty) && (!which_bp) &&
- (which_bp = (*bug_ctx.find_empty) ()) == 0) {
- printf ("All breakpoints in use\n");
- return 0;
- }
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # %d\n", which_bp);
- return 0;
- }
-
- if (!bug_ctx.hw_debug_enabled) {
- SET_MSR (GET_MSR () | 0x200); /* set MSR[ DE ] */
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
- bug_ctx.hw_debug_enabled = 1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
- break;
- }
-
- return which_bp;
-} /* bedbug405_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_clear (int which_bp)
-{
- /* -------------------------------------------------- */
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # (%d)\n", which_bp);
- return -1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
- break;
- }
-
- return 0;
-} /* bedbug405_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/cpu/ppc4xx/cache.S b/cpu/ppc4xx/cache.S
deleted file mode 100644
index 269716f..0000000
--- a/cpu/ppc4xx/cache.S
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <config.h>
-#include <config.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/*
- * Flush instruction cache.
- */
-_GLOBAL(invalidate_icache)
- iccci r0,r0
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS 64
-#define CACHE_NLINES 32
-
-_GLOBAL(flush_dcache)
- li r4,(2 * CACHE_NWAYS * CACHE_NLINES)
- mtctr r4
- lis r5,0
-1: lwz r3,0(r5) /* Load one word from every line */
- addi r5,r5,L1_CACHE_BYTES
- bdnz 1b
- sync
- blr
-
-_GLOBAL(invalidate_dcache)
- addi r6,0,0x0000 /* clear GPR 6 */
- /* Do loop for # of dcache congruence classes. */
- lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
- ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6,L1_CACHE_BYTES /* bump to next line */
- bdnz ..dcloop
- sync
- blr
-
-/*
- * Cache functions.
- *
- * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
- * although for some cache-ralated calls stubs have to be provided to satisfy
- * symbols resolution.
- * Icache-related functions are used in POST framework.
- *
- */
-#ifdef CONFIG_440
-
- .globl dcache_disable
- .globl dcache_enable
- .globl icache_disable
- .globl icache_enable
-dcache_disable:
-dcache_enable:
-icache_disable:
-icache_enable:
- blr
-
- .globl dcache_status
- .globl icache_status
-dcache_status:
-icache_status:
- mr r3, 0
- blr
-
-#else /* CONFIG_440 */
-
- .globl icache_enable
-icache_enable:
- mflr r8
- bl invalidate_icache
- mtlr r8
- isync
- addis r3,r0, 0xc000 /* set bit 0 */
- mticcr r3
- blr
-
- .globl icache_disable
-icache_disable:
- addis r3,r0, 0x0000 /* clear bit 0 */
- mticcr r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mficcr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
- bl invalidate_dcache
- mtlr r8
- isync
- addis r3,r0, 0x8000 /* set bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r8
- bl flush_dcache
- mtlr r8
- addis r3,r0, 0x0000 /* clear bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfdccr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
-#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/cmd_chip_config.c b/cpu/ppc4xx/cmd_chip_config.c
deleted file mode 100644
index ba57211..0000000
--- a/cpu/ppc4xx/cmd_chip_config.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/ppc4xx_config.h>
-#include <asm/io.h>
-
-static void print_configs(int cur_config_nr)
-{
- int i;
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- printf("%-16s - %s", ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
- if (i == cur_config_nr)
- printf(" ***");
- printf("\n");
- }
-
-}
-
-static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int i;
- int ret;
- int cur_config_nr = -1;
- u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
-
- /*
- * First switch to correct I2C bus. This is I2C bus 0
- * for all currently available 4xx derivats.
- */
- I2C_SET_BUS(0);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- if (ret) {
- printf("Error reading EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- /*
- * Search the current configuration
- */
- for (i = 0; i < ppc4xx_config_count; i++) {
- if (memcmp(cur_config, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
- cur_config_nr = i;
- }
-
- if (cur_config_nr == -1) {
- printf("Warning: The I2C bootstrap values don't match any"
- " of the available options!\n");
- printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
- printf("%02x ", cur_config[i]);
- }
- printf("\n");
- }
-
- if (argc < 2) {
- printf("Available configurations (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- print_configs(cur_config_nr);
- return 0;
- }
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- /*
- * Search for configuration name/label
- */
- if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
- printf("Using configuration:\n%-16s - %s\n",
- ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- if (ret) {
- printf("Error updating EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- printf("done (dump via 'i2c md %x 0.1 %x')\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
- printf("Reset the board for the changes to"
- " take effect\n");
- return 0;
- }
- }
-
- printf("Configuration %s not found!\n", argv[1]);
- print_configs(cur_config_nr);
- return -1;
-}
-
-U_BOOT_CMD(
- chip_config, 2, 0, do_chip_config,
- "program the I2C bootstrap EEPROM",
- "[config-label]"
-);
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
deleted file mode 100644
index a1696d3..0000000
--- a/cpu/ppc4xx/commproc.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Atapted for ppc4XX by Denis Peter
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
-#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
-# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
-#endif
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- out_be32(save_addr, a);
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- return in_be32(save_addr);
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk
deleted file mode 100644
index c1de1e9..0000000
--- a/cpu/ppc4xx/config.mk
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
-
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
-PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
-else
-PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
-endif
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/ppc4xx/u-boot.lds
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
deleted file mode 100644
index e1a023b..0000000
--- a/cpu/ppc4xx/cpu.c
+++ /dev/null
@@ -1,754 +0,0 @@
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_reset(void);
-
-/*
- * To provide an interface to detect CPU number for boards that support
- * more then one CPU, we implement the "weak" default functions here.
- *
- * Returns CPU number
- */
-int __get_cpu_num(void)
-{
- return NA_OR_UNKNOWN_CPU;
-}
-int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
-
-#if defined(CONFIG_PCI)
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define PCI_ASYNC
-
-static int pci_async_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_SDSTP1, val);
- return (val & SDR0_SDSTP1_PAME_MASK);
-#endif
-}
-#endif
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
- !defined(CONFIG_405) && !defined(CONFIG_405EX)
-int pci_arbiter_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_440GP)
- return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long val;
-
- mfsdr(SDR0_XCR, val);
- return (val & 0x80000000);
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_PCI0, val);
- return (val & 0x80000000);
-#endif
-}
-#endif
-
-#if defined(CONFIG_405EP)
-#define I2C_BOOTROM
-
-static int i2c_bootrom_enabled(void)
-{
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
-#else
- unsigned long val;
-
- mfsdr(SDR0_SDCS0, val);
- return (val & SDR0_SDCS_SDD);
-#endif
-}
-#endif
-
-#if defined(CONFIG_440GX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (16 bits)",
- "EBC (8 bits)",
- "EBC (32 bits)",
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "Reserved",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define SDR0_PINSTP_SHIFT 30
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "NAND (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "PCI",
- "PCI",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
-#endif
-
-#if defined(CONFIG_460SX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (32 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
-#endif
-
-#if defined(CONFIG_405EZ)
-#define SDR0_PINSTP_SHIFT 28
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "SPI (fast)",
- "NAND (512 page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (32 bits)",
- "I2C (Addr 0x50)",
- "NAND (2K page, 5 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (16 bits)",
- "Reserved",
- "NAND (2K page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "NAND (512 page, 3 addr cycle)",
- "I2C (Addr 0x50)",
- "SPI (slow)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
- 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
-#endif
-
-#if defined(CONFIG_405EX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)",
- "EBC (8 bits)",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(SDR0_PINSTP_SHIFT)
-static int bootstrap_option(void)
-{
- unsigned long val;
-
- mfsdr(SDR0_PINSTP, val);
- return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
-}
-#endif /* SDR0_PINSTP_SHIFT */
-
-
-#if defined(CONFIG_440)
-static int do_chip_reset (unsigned long sys0, unsigned long sys1)
-{
- /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
- * reset.
- */
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */
- mtdcr (CPC0_SYS0, sys0);
- mtdcr (CPC0_SYS1, sys1);
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */
- mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
-
- return 1;
-}
-#endif
-
-
-int checkcpu (void)
-{
-#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 reg;
-#endif
-
-#if !defined(CONFIG_IOP480)
- char addstr[64] = "";
- sys_info_t sys_info;
- int cpu_num;
-
- cpu_num = get_cpu_num();
- if (cpu_num >= 0)
- printf("CPU%d: ", cpu_num);
- else
- puts("CPU: ");
-
- get_sys_info(&sys_info);
-
-#if defined(CONFIG_XILINX_440)
- puts("IBM PowerPC 4");
-#else
- puts("AMCC PowerPC 4");
-#endif
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX)
- puts("05");
-#endif
-#if defined(CONFIG_440)
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- puts("60");
-#else
- puts("40");
-#endif
-#endif
-
- switch (pvr) {
- case PVR_405GP_RB:
- puts("GP Rev. B");
- break;
-
- case PVR_405GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_405GP_RD:
- puts("GP Rev. D");
- break;
-
-#ifdef CONFIG_405GP
- case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
- puts("GP Rev. E");
- break;
-#endif
-
- case PVR_405CR_RA:
- puts("CR Rev. A");
- break;
-
- case PVR_405CR_RB:
- puts("CR Rev. B");
- break;
-
-#ifdef CONFIG_405CR
- case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
- puts("CR Rev. C");
- break;
-#endif
-
- case PVR_405GPR_RB:
- puts("GPr Rev. B");
- break;
-
- case PVR_405EP_RB:
- puts("EP Rev. B");
- break;
-
- case PVR_405EZ_RA:
- puts("EZ Rev. A");
- break;
-
- case PVR_405EX1_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RA:
- puts("EXr Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RC:
- puts("EX Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RC:
- puts("EX Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RD:
- puts("EX Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RD:
- puts("EX Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
-#if defined(CONFIG_440)
- case PVR_440GP_RB:
- puts("GP Rev. B");
- /* See errata 1.12: CHIP_4 */
- if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
- (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
- puts ( "\n\t CPC0_SYSx DCRs corrupted. "
- "Resetting chip ...\n");
- udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
- do_chip_reset ( mfdcr(CPC0_STRP0),
- mfdcr(CPC0_STRP1) );
- }
- break;
-
- case PVR_440GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_440GX_RA:
- puts("GX Rev. A");
- break;
-
- case PVR_440GX_RB:
- puts("GX Rev. B");
- break;
-
- case PVR_440GX_RC:
- puts("GX Rev. C");
- break;
-
- case PVR_440GX_RF:
- puts("GX Rev. F");
- break;
-
- case PVR_440EP_RA:
- puts("EP Rev. A");
- break;
-
-#ifdef CONFIG_440EP
- case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
- puts("EP Rev. B");
- break;
-
- case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */
- puts("EP Rev. C");
- break;
-#endif /* CONFIG_440EP */
-
-#ifdef CONFIG_440GR
- case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
- puts("GR Rev. A");
- break;
-
- case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */
- puts("GR Rev. B");
- break;
-#endif /* CONFIG_440GR */
-#endif /* CONFIG_440 */
-
-#ifdef CONFIG_440EPX
- case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440EPX */
-
-#ifdef CONFIG_440GRX
- case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440GRX */
-
- case PVR_440SP_6_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SP_6_RC:
- puts("SP Rev. C");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RC:
- puts("SP Rev. C");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- case PVR_460EX_RA:
- puts("EX Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460EX_SE_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460EX_RB:
- puts("EX Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RA:
- puts("GT Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460GT_SE_RA:
- puts("GT Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RB:
- puts("GT Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-#endif
-
- case PVR_460SX_RA:
- puts("SX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460SX_RA_V1:
- puts("SX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_460GX_RA:
- puts("GX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460GX_RA_V1:
- puts("GX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_VIRTEX5:
- puts("x5 VIRTEX5");
- break;
-
- default:
- printf (" UNKNOWN (PVR=%08x)", pvr);
- break;
- }
-
- printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
- strmhz(buf, clock),
- sys_info.freqPLB / 1000000,
- get_OPB_freq() / 1000000,
- sys_info.freqEBC / 1000000);
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
- printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
-#endif
- printf(")\n");
-
- if (addstr[0] != 0)
- printf(" %s\n", addstr);
-
-#if defined(I2C_BOOTROM)
- printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
-#endif /* I2C_BOOTROM */
-#if defined(SDR0_PINSTP_SHIFT)
- printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
- printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
-#ifdef CONFIG_NAND_U_BOOT
- puts(", booting from NAND");
-#endif /* CONFIG_NAND_U_BOOT */
- putc('\n');
-#endif /* SDR0_PINSTP_SHIFT */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
-#endif
-
-#if defined(CONFIG_PCI) && defined(PCI_ASYNC)
- if (pci_async_enabled()) {
- printf (", PCI async ext clock used");
- } else {
- printf (", PCI sync clock at %lu MHz",
- sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
- }
-#endif
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- putc('\n');
-#endif
-
-#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
- printf (" 16 kB I-Cache 16 kB D-Cache");
-#elif defined(CONFIG_440)
- printf (" 32 kB I-Cache 32 kB D-Cache");
-#else
- printf (" 16 kB I-Cache %d kB D-Cache",
- ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
-#endif
-#endif /* !defined(CONFIG_IOP480) */
-
-#if defined(CONFIG_IOP480)
- printf ("PLX IOP480 (PVR=%08x)", pvr);
- printf (" at %s MHz:", strmhz(buf, clock));
- printf (" %u kB I-Cache", 4);
- printf (" %u kB D-Cache", 2);
-#endif
-
-#endif /* !defined(CONFIG_405) */
-
- putc ('\n');
-
- return 0;
-}
-
-int ppc440spe_revB() {
- unsigned int pvr;
-
- pvr = get_pvr();
- if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
- return 1;
- else
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-#if defined(CONFIG_BOARD_RESET)
- board_reset();
-#else
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
-#else
- /*
- * Initiate system reset in debug control register DBCR
- */
- mtspr(SPRN_DBCR0, 0x30000000);
-#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
-#endif /* defined(CONFIG_BOARD_RESET) */
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-#if !defined(CONFIG_IOP480)
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- return (sys_info.freqProcessor);
-#else
- return (66000000);
-#endif
-
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_4xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void reset_4xx_watchdog(void)
-{
- /*
- * Clear TSR(WIS) bit
- */
- mtspr(SPRN_TSR, 0x40000000);
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_PPC4xx_EMAC)
- ppc_4xx_eth_initialize(bis);
-#endif
- return 0;
-}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
deleted file mode 100644
index 8a6e545..0000000
--- a/cpu/ppc4xx/cpu_init.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <ppc4xx_enet.h>
-#include <asm/processor.h>
-#include <asm/gpio.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#ifndef CONFIG_SYS_PLL_RECONFIG
-#define CONFIG_SYS_PLL_RECONFIG 0
-#endif
-
-void reconfigure_pll(u32 new_cpu_freq)
-{
-#if defined(CONFIG_440EPX)
- int reset_needed = 0;
- u32 reg, temp;
- u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
- fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
- fbdv, target_fbdv, lfbdv, target_lfbdv,
- perdv0, target_perdv0, /* CLK_PERD */
- spcid0, target_spcid0; /* CLK_SPCID */
-
- /* Reconfigure clocks if necessary.
- * See PPC440EPx User's Manual, sections 8.2 and 14 */
- if (new_cpu_freq == 667) {
- target_prbdv0 = 2;
- target_fwdva = 2;
- target_fwdvb = 4;
- target_fbdv = 20;
- target_lfbdv = 1;
- target_perdv0 = 4;
- target_spcid0 = 4;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
- if (prbdv0 != target_prbdv0) {
- reg &= ~PRBDV_MASK;
- reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
- mtcpr(CPR0_PRIMBD0, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PLLD, reg);
-
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdva = temp ? temp : 16;
-
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdvb = temp ? temp : 8;
-
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
-
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
-
- if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
- ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
- ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
- (target_lfbdv == 64 ? 0 : target_lfbdv);
- mtcpr(CPR0_PLLD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PERD, reg);
- perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
- if (perdv0 != target_perdv0) {
- reg &= ~CPR0_PERD_PERDV0_MASK;
- reg |= (target_perdv0 << 24);
- mtcpr(CPR0_PERD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
- spcid0 = temp ? temp : 4;
- if (spcid0 != target_spcid0) {
- reg &= ~CPR0_SPCID_SPCIDV0_MASK;
- reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
- mtcpr(CPR0_SPCID, reg);
- reset_needed = 1;
- }
- }
-
- /* Get current value of FWDVA.*/
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
-
- /*
- * Check to see if FWDVA has been set to value of 1. if it has we must
- * modify it.
- */
- if (temp == 1) {
- mfcpr(CPR0_PLLD, reg);
- /* Get current value of fbdv. */
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
- /* Get current value of lfbdv. */
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
- /*
- * Load register that contains current boot strapping option.
- */
- mfcpr(CPR0_ICFG, reg);
- /* Shift strapping option into low 3 bits.*/
- reg = (reg >> 28);
-
- if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
- (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
- /*
- * Get current value of FWDVA. Assign current FWDVA to
- * new FWDVB.
- */
- mfcpr(CPR0_PLLD, reg);
- target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdvb = target_fwdvb ? target_fwdvb : 8;
- /*
- * Get current value of FWDVB. Assign current FWDVB to
- * new FWDVA.
- */
- target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdva = target_fwdva ? target_fwdva : 16;
- /*
- * Update CPR0_PLLD with switched FWDVA and FWDVB.
- */
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
- ((fwdvb == 8 ? 0 : fwdvb) << 8) |
- ((fbdv == 32 ? 0 : fbdv) << 24) |
- (lfbdv == 64 ? 0 : lfbdv);
- mtcpr(CPR0_PLLD, reg);
- /* Acknowledge that a reset is required. */
- reset_needed = 1;
- }
- }
-
- if (reset_needed) {
- /*
- * Set reload inhibit so configuration will persist across
- * processor resets
- */
- mfcpr(CPR0_ICFG, reg);
- reg &= ~CPR0_ICFG_RLI_MASK;
- reg |= 1 << 31;
- mtcpr(CPR0_ICFG, reg);
-
- /* Reset processor if configuration changed */
- __asm__ __volatile__ ("sync; isync");
- mtspr(SPRN_DBCR0, 0x20000000);
- }
-#endif
-}
-
-/*
- * Breath some life into the CPU...
- *
- * Reconfigure PLL if necessary,
- * set up the memory map,
- * initialize a bunch of registers
- */
-void
-cpu_init_f (void)
-{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
- u32 val;
-#endif
-
- reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
-
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
- /*
- * GPIO0 setup (select GPIO or alternate function)
- */
-#if defined(CONFIG_SYS_GPIO0_OR)
- out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
-#endif
-#if defined(CONFIG_SYS_GPIO0_ODR)
- out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
-#endif
- out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
- out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
- out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
- out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
- out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-#if defined(CONFIG_SYS_GPIO0_ISR2H)
- out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
- out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
-#endif
-#if defined (CONFIG_SYS_GPIO0_TCR)
- out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
-#endif
-#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
-
-#if defined (CONFIG_405EP)
- /*
- * Set EMAC noise filter bits
- */
- mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
- gpio_set_chip_configuration();
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
-
- /*
- * External Bus Controller (EBC) Setup
- */
-#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405))
- /*
- * Move the next instructions into icache, since these modify the flash
- * we are running from!
- */
- asm volatile(" bl 0f" ::: "lr");
- asm volatile("0: mflr 3" ::: "r3");
- asm volatile(" addi 4, 0, 14" ::: "r4");
- asm volatile(" mtctr 4" ::: "ctr");
- asm volatile("1: icbt 0, 3");
- asm volatile(" addi 3, 3, 32" ::: "r3");
- asm volatile(" bdnz 1b" ::: "ctr", "cr0");
- asm volatile(" addis 3, 0, 0x0" ::: "r3");
- asm volatile(" ori 3, 3, 0xA000" ::: "r3");
- asm volatile(" mtctr 3" ::: "ctr");
- asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
-#endif
-
- mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
- mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
- mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
- mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
- mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
- mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
- mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
- mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
- mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
- mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
- mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
- mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
- mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
- mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
- mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
- mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
-#endif
-
-#if defined (CONFIG_SYS_EBC_CFG)
- mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- val = mfspr(tcr);
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- val |= 0xb8000000; /* generate system reset after 1.34 seconds */
-#elif defined(CONFIG_440EPX)
- val |= 0xb0000000; /* generate system reset after 1.34 seconds */
-#else
- val |= 0xf0000000; /* generate system reset after 2.684 seconds */
-#endif
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- val &= ~0x30000000; /* clear WRC bits */
- val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
-#endif
- mtspr(tcr, val);
-
- val = mfspr(tsr);
- val |= 0x80000000; /* enable watchdog timer */
- mtspr(tsr, val);
-
- reset_4xx_watchdog();
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_440GX)
- /* Take the GX out of compatibility mode
- * Travis Sawyer, 9 Mar 2004
- * NOTE: 440gx user manual inconsistency here
- * Compatibility mode and Ethernet Clock select are not
- * correct in the manual
- */
- mfsdr(SDR0_MFR, val);
- val &= ~0x10000000;
- mtsdr(SDR0_MFR,val);
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_460EX)
- /*
- * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
- * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
- * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
- */
- mfsdr(SDR0_AHB_CFG, val);
- val |= 0x80;
- val &= ~0x40;
- mtsdr(SDR0_AHB_CFG, val);
- mfsdr(SDR0_USB2HOST_CFG, val);
- val &= ~0xf00;
- val |= 0x400;
- mtsdr(SDR0_USB2HOST_CFG, val);
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
- */
- mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
- PLB0_ACR_RDP_4DEEP);
- mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
- PLB1_ACR_RDP_4DEEP);
-#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_405GP)
- uint pvr = get_pvr();
-
- /*
- * Set edge conditioning circuitry on PPC405GPr
- * for compatibility to existing PPC405GP designs.
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- mtdcr(CPC0_ECR, 0x60606000);
- }
-#endif /* defined(CONFIG_405GP) */
-
- return 0;
-}
-
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
-/*
- * 440EP(x)/GR(x) PCI async/sync clocking restriction:
- *
- * In asynchronous PCI mode, the synchronous PCI clock must meet
- * certain requirements. The following equation describes the
- * relationship that must be maintained between the asynchronous PCI
- * clock and synchronous PCI clock. Select an appropriate PCI:PLB
- * ratio to maintain the relationship:
- *
- * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
- */
-static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
-{
- if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
- return 0;
- else
- return 1;
-}
-
-int ppc4xx_pci_sync_clock_config(u32 async)
-{
- sys_info_t sys_info;
- u32 sync;
- int div;
- u32 reg;
- u32 spcid_val[] = {
- CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
- CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
-
- get_sys_info(&sys_info);
- sync = sys_info.freqPCI;
-
- /*
- * First check if the equation above is met
- */
- if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
- /*
- * Reconfigure PCI sync clock to meet the equation.
- * Start with highest possible PCI sync frequency
- * (divider 1).
- */
- for (div = 1; div <= 4; div++) {
- sync = sys_info.freqPLB / div;
- if (ppc4xx_pci_sync_clock_ok(sync, async))
- break;
- }
-
- if (div <= 4) {
- mtcpr(CPR0_SPCID, spcid_val[div]);
-
- mfcpr(CPR0_ICFG, reg);
- reg |= CPR0_ICFG_RLI_MASK;
- mtcpr(CPR0_ICFG, reg);
-
- /* do chip reset */
- mtspr(SPRN_DBCR0, 0x20000000);
- } else {
- /* Impossible to configure the PCI sync clock */
- return -1;
- }
- }
-
- return 0;
-}
-#endif
diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S
deleted file mode 100644
index 93465a3..0000000
--- a/cpu/ppc4xx/dcr.S
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define _ASMLANGUAGE
-
-/*****************************************************************************
- *
- * XXX - DANGER
- * These routines make use of self modifying code. DO NOT CALL THEM
- * UNTIL THEY ARE RELOCATED TO RAM. Additionally, I do not
- * recommend them for use in anything other than an interactive
- * debugging environment. This is mainly due to performance reasons.
- *
- ****************************************************************************/
-
-/*
- * static void _create_MFDCR(unsigned short dcrn)
- *
- * Builds a 'mfdcr' instruction for get_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MFDCR,@function
-_create_MFDCR:
- /*
- * Build up a 'mfdcr' instruction formatted as follows:
- *
- * OPCD | RT | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 323 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RT = destination register - %r3 return register
- * DCRF = DCRN # with upper and lower halves swapped
- * XO = extended opcode - 323
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e30 /* RT = %r3 */
- ori r3, r3, 323 /* XO = 323 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r4
- stw r3, 0(r4) /* Store instr in get_dcr() */
- dcbst r0, r4 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r4 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe1: .size _create_MFDCR,.Lfe1-_create_MFDCR
-/* end _create_MFDCR() */
-
-/*
- * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
- *
- * Builds a 'mtdcr' instruction for set_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MTDCR,@function
-_create_MTDCR:
- /*
- * Build up a 'mtdcr' instruction formatted as follows:
- *
- * OPCD | RS | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 451 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RS = source register - %r4
- * DCRF = dest. DCRN # with upper and lower halves swapped
- * XO = extended opcode - 451
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e40 /* RS = %r4 */
- ori r3, r3, 451 /* XO = 451 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r5
- stw r3, 0(r5) /* Store instr in set_dcr() */
- dcbst r0, r5 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r5 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe2: .size _create_MTDCR,.Lfe2-_create_MTDCR
-/* end _create_MTDCR() */
-
-
-/*
- * unsigned long get_dcr(unsigned short dcrn)
- *
- * Return a given DCR's value.
- */
- /* */
- /* XXX - This is self modifying code, hence */
- /* it is in the data section. */
- /* */
- .section ".data"
- .align 2
- .globl get_dcr
- .type get_dcr,@function
-get_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MFDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Get DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe3: .size get_dcr,.Lfe3-get_dcr
-/* end get_dcr() */
-
-
-/*
- * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
- *
- * Return a given DCR's value.
- */
- /*
- * XXX - This is self modifying code, hence
- * it is in the data section.
- */
- .section ".data"
- .align 2
- .globl set_dcr
- .type set_dcr,@function
-set_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MTDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Set DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe4: .size set_dcr,.Lfe4-set_dcr
-/* end set_dcr() */
-#endif
diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c
deleted file mode 100644
index ffc3817..0000000
--- a/cpu/ppc4xx/denali_data_eye.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * cpu/ppc4xx/denali_data_eye.c
- * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
- *
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/*-----------------------------------------------------------------------------+
- * denali_wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-int denali_wait_for_dlllock(void)
-{
- u32 val;
- int wait;
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- for (wait = 0; wait != 0xffff; ++wait) {
- mfsdram(DDR0_17, val);
- if (DDR0_17_DLLLOCKREG_DECODE(val)) {
- /* dlllockreg bit on */
- return 0;
- }
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
- return -1;
-}
-
-#if defined(CONFIG_DDR_DATA_EYE)
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-static int wait_for_dram_init_complete(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* --------------------------------------------------------------+
- * Wait for 'DRAM initialization complete' bit in status register
- * -------------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
- debug("DRAM initialization complete bit in status register did not "
- "rise\n");
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(void)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
- };
-
- ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
- dll_dqs_delay_X++) {
- /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
- dll_dqs_delay_X++) { */
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* clear any ECC errors */
- mtdcr(ddrcfga, DDR0_00);
- mtdcr(ddrcfgd,
- mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur!!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j = 0; j < NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
- }
-
- /* read values back */
- for (j = 0; j < NUM_TRIES; j++) {
- for (k = 0; k < NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer
- [j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed. */
- mtdcr(ddrcfga, DDR0_00);
- if (j < NUM_TRIES
- || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
- 0x3F)) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val =
- dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases =
- wr_dqs_shift;
- dll_dqs_delay_X_start_window =
- dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window =
- dll_dqs_delay_X;
- }
- }
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /* -----------------------------------------------------------+
- * Largest passing window is now detected.
- * ----------------------------------------------------------*/
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
- dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* defined(CONFIG_DDR_DATA_EYE) */
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
deleted file mode 100644
index 5858cb3..0000000
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ /dev/null
@@ -1,1256 +0,0 @@
-/*
- * cpu/ppc4xx/denali_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
- * DDR2 controller, specifically the 440EPx/GRx.
- *
- * (C) Copyright 2007-2008
- * Larry Johnson, lrj@acm.org.
- *
- * Based primarily on cpu/ppc4xx/4xx_spd_ddr2.c, which is...
- *
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define MAXDIMMS 2
-#define MAXRANKS 2
-
-#define ONE_BILLION 1000000000
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#define DLL_DQS_DELAY 0x19
-#define DLL_DQS_BYPASS 0x0B
-#define DQS_OUT_SHIFT 0x7F
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#if defined(CONFIG_4xx_DCACHE)
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-extern void dcbz_area(u32 start_address, u32 num_bytes);
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void spd_ddr_init_hang(void)
- __attribute__ ((weak, alias("__spd_ddr_init_hang")));
-
-#if defined(DEBUG)
-static void print_mcsr(void)
-{
- printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
-}
-
-static void denali_sdram_register_dump(void)
-{
- unsigned int sdram_data;
-
- printf("\n Register Dump:\n");
- mfsdram(DDR0_00, sdram_data);
- printf(" DDR0_00 = 0x%08X", sdram_data);
- mfsdram(DDR0_01, sdram_data);
- printf(" DDR0_01 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_02, sdram_data);
- printf(" DDR0_02 = 0x%08X", sdram_data);
- mfsdram(DDR0_03, sdram_data);
- printf(" DDR0_03 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_04, sdram_data);
- printf(" DDR0_04 = 0x%08X", sdram_data);
- mfsdram(DDR0_05, sdram_data);
- printf(" DDR0_05 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_06, sdram_data);
- printf(" DDR0_06 = 0x%08X", sdram_data);
- mfsdram(DDR0_07, sdram_data);
- printf(" DDR0_07 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_08, sdram_data);
- printf(" DDR0_08 = 0x%08X", sdram_data);
- mfsdram(DDR0_09, sdram_data);
- printf(" DDR0_09 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_10, sdram_data);
- printf(" DDR0_10 = 0x%08X", sdram_data);
- mfsdram(DDR0_11, sdram_data);
- printf(" DDR0_11 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_12, sdram_data);
- printf(" DDR0_12 = 0x%08X", sdram_data);
- mfsdram(DDR0_14, sdram_data);
- printf(" DDR0_14 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_17, sdram_data);
- printf(" DDR0_17 = 0x%08X", sdram_data);
- mfsdram(DDR0_18, sdram_data);
- printf(" DDR0_18 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_19, sdram_data);
- printf(" DDR0_19 = 0x%08X", sdram_data);
- mfsdram(DDR0_20, sdram_data);
- printf(" DDR0_20 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_21, sdram_data);
- printf(" DDR0_21 = 0x%08X", sdram_data);
- mfsdram(DDR0_22, sdram_data);
- printf(" DDR0_22 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_23, sdram_data);
- printf(" DDR0_23 = 0x%08X", sdram_data);
- mfsdram(DDR0_24, sdram_data);
- printf(" DDR0_24 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_25, sdram_data);
- printf(" DDR0_25 = 0x%08X", sdram_data);
- mfsdram(DDR0_26, sdram_data);
- printf(" DDR0_26 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_27, sdram_data);
- printf(" DDR0_27 = 0x%08X", sdram_data);
- mfsdram(DDR0_28, sdram_data);
- printf(" DDR0_28 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_31, sdram_data);
- printf(" DDR0_31 = 0x%08X", sdram_data);
- mfsdram(DDR0_32, sdram_data);
- printf(" DDR0_32 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_33, sdram_data);
- printf(" DDR0_33 = 0x%08X", sdram_data);
- mfsdram(DDR0_34, sdram_data);
- printf(" DDR0_34 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_35, sdram_data);
- printf(" DDR0_35 = 0x%08X", sdram_data);
- mfsdram(DDR0_36, sdram_data);
- printf(" DDR0_36 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_37, sdram_data);
- printf(" DDR0_37 = 0x%08X", sdram_data);
- mfsdram(DDR0_38, sdram_data);
- printf(" DDR0_38 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_39, sdram_data);
- printf(" DDR0_39 = 0x%08X", sdram_data);
- mfsdram(DDR0_40, sdram_data);
- printf(" DDR0_40 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_41, sdram_data);
- printf(" DDR0_41 = 0x%08X", sdram_data);
- mfsdram(DDR0_42, sdram_data);
- printf(" DDR0_42 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_43, sdram_data);
- printf(" DDR0_43 = 0x%08X", sdram_data);
- mfsdram(DDR0_44, sdram_data);
- printf(" DDR0_44 = 0x%08X\n", sdram_data);
-}
-#else
-static inline void denali_sdram_register_dump(void)
-{
-}
-
-inline static void print_mcsr(void)
-{
-}
-#endif /* defined(DEBUG) */
-
-static int is_ecc_enabled(void)
-{
- u32 val;
-
- mfsdram(DDR0_22, val);
- return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
-}
-
-static unsigned char spd_read(u8 chip, unsigned int addr)
-{
- u8 data[2];
-
- if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
- debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
- return 0;
- }
- debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
- chip, addr, data[0]);
- return data[0];
-}
-
-static unsigned long get_tcyc(unsigned char reg)
-{
- /*
- * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
- * nibbles: the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns; the value presented by the lower order
- * nibble (bits 0-3) has a granularity of .1ns and is added to the value
- * designated by the higher nibble. In addition, four lines of the lower
- * order nibble are assigned to support +.25, +.33, +.66, and +.75.
- */
-
- unsigned char subfield_b = reg & 0x0F;
-
- switch (subfield_b & 0x0F) {
- case 0x0:
- case 0x1:
- case 0x2:
- case 0x3:
- case 0x4:
- case 0x5:
- case 0x6:
- case 0x7:
- case 0x8:
- case 0x9:
- return 1000 * (reg >> 4) + 100 * subfield_b;
- case 0xA:
- return 1000 * (reg >> 4) + 250;
- case 0xB:
- return 1000 * (reg >> 4) + 333;
- case 0xC:
- return 1000 * (reg >> 4) + 667;
- case 0xD:
- return 1000 * (reg >> 4) + 750;
- }
- return 0;
-}
-
-/*------------------------------------------------------------------
- * Find the installed DIMMs, make sure that the are DDR2, and fill
- * in the dimm_ranks array. Then dimm_ranks[dimm_num] > 0 iff the
- * DIMM and dimm_num is present.
- * Note: Because there are only two chip-select lines, it is assumed
- * that a board with a single socket can support two ranks on that
- * socket, while a board with two sockets can support only one rank
- * on each socket.
- *-----------------------------------------------------------------*/
-static void get_spd_info(unsigned long dimm_ranks[],
- unsigned long *ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found = FALSE;
- unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- *ranks = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- if ((num_of_bytes != 0) && (total_size != 0)) {
- unsigned char const dimm_type =
- spd_read(iic0_dimm_addr[dimm_num], 2);
-
- unsigned long ranks_on_dimm =
- (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
-
- if (8 != dimm_type) {
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode "
- "DRAM DIMM");
- break;
- case 2:
- printf("ERROR: EDO DIMM");
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM");
- break;
- case 4:
- printf("ERROR: SDRAM DIMM");
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM");
- break;
- case 6:
- printf("ERROR: SGRAM DIMM");
- break;
- case 7:
- printf("ERROR: DDR1 DIMM");
- break;
- default:
- printf("ERROR: Unknown DIMM (type %d)",
- (unsigned int)dimm_type);
- break;
- }
- printf(" detected in slot %lu.\n", dimm_num);
- printf("Only DDR2 SDRAM DIMMs are supported."
- "\n");
- printf("Replace the module with a DDR2 DIMM."
- "\n\n");
- spd_ddr_init_hang();
- }
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
- "\n", dimm_num, ranks_on_dimm);
- if (ranks_on_dimm > max_ranks_per_dimm) {
- printf("WARNING: DRAM DIMM in slot %lu has %lu "
- "ranks.\n", dimm_num, ranks_on_dimm);
- if (1 == max_ranks_per_dimm) {
- printf("Only one rank will be used.\n");
- } else {
- printf
- ("Only two ranks will be used.\n");
- }
- ranks_on_dimm = max_ranks_per_dimm;
- }
- dimm_ranks[dimm_num] = ranks_on_dimm;
- *ranks += ranks_on_dimm;
- } else {
- dimm_ranks[dimm_num] = 0;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
- if (dimm_found == FALSE) {
- printf("ERROR: No memory installed.\n");
- printf("Install at least one DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- debug("Total number of ranks = %d\n", *ranks);
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in picoseconds to match the way DIMM cycle time is
- * calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- cycle_time =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
- debug("cycle_time=%d ps\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time. The
- * additionnal 10ps is here to accept a small
- * incertainty.
- */
- printf
- ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)cycle_time,
- (unsigned int)dimm_num,
- (unsigned int)calc_cycle_time);
- printf
- ("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * This routine gets size information for the installed memory
- * DIMMs.
- *-----------------------------------------------------------------*/
-static void get_dimm_size(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long *const rows,
- unsigned long *const banks,
- unsigned long *const cols, unsigned long *const width)
-{
- unsigned long dimm_num;
-
- *rows = 0;
- *banks = 0;
- *cols = 0;
- *width = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- unsigned long t;
-
- /* Rows */
- t = spd_read(iic0_dimm_addr[dimm_num], 3);
- if (0 == *rows) {
- *rows = t;
- } else if (t != *rows) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of rows.\n\n");
- spd_ddr_init_hang();
- }
- /* Banks */
- t = spd_read(iic0_dimm_addr[dimm_num], 17);
- if (0 == *banks) {
- *banks = t;
- } else if (t != *banks) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of banks.\n\n");
- spd_ddr_init_hang();
- }
- /* Columns */
- t = spd_read(iic0_dimm_addr[dimm_num], 4);
- if (0 == *cols) {
- *cols = t;
- } else if (t != *cols) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of columns.\n\n");
- spd_ddr_init_hang();
- }
- /* Data width */
- t = spd_read(iic0_dimm_addr[dimm_num], 6);
- if (0 == *width) {
- *width = t;
- } else if (t != *width) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same data width.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
- debug("Number of rows = %d\n", *rows);
- debug("Number of columns = %d\n", *cols);
- debug("Number of banks = %d\n", *banks);
- debug("Data width = %d\n", *width);
- if (*rows > 14) {
- printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
- *rows);
- printf("Only modules with 14 or fewer rows are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (4 != *banks && 8 != *banks) {
- printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
- printf("Only modules with 4 or 8 banks are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (*cols > 12) {
- printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
- *cols);
- printf("Only modules with 12 or fewer columns are "
- "supported.\n\n");
- spd_ddr_init_hang();
- }
- if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
- printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
- *width);
- printf("Only modules with widths of 32, 40, 64, and 72 bits "
- "are supported.\n\n");
- spd_ddr_init_hang();
- }
-}
-
-/*------------------------------------------------------------------
- * Only 1.8V modules are supported. This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (0x05 != voltage_type) { /* 1.8V for DDR2 */
- printf("ERROR: Slot %lu provides 1.8V for DDR2 "
- "DIMMs.\n", dimm_num);
- switch (voltage_type) {
- case 0x00:
- printf("This DIMM is 5.0 Volt/TTL.\n");
- break;
- case 0x01:
- printf("This DIMM is LVTTL.\n");
- break;
- case 0x02:
- printf("This DIMM is 1.5 Volt.\n");
- break;
- case 0x03:
- printf("This DIMM is 3.3 Volt/TTL.\n");
- break;
- case 0x04:
- printf("This DIMM is 2.5 Volt.\n");
- break;
- default:
- printf("This DIMM is an unknown "
- "voltage.\n");
- break;
- }
- printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-static void program_ddr0_03(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long rows, unsigned long *cas_latency)
-{
- unsigned long dimm_num;
- unsigned long cas_index;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ps = 100;
- unsigned long max_3_0_tcyc_ps = 100;
- unsigned long max_4_0_tcyc_ps = 100;
- unsigned long max_5_0_tcyc_ps = 100;
- unsigned char cas_available = 0x3C; /* value for DDR2 */
- u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
- unsigned int const tcyc_addr[3] = { 9, 23, 25 };
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- debug("sdram_freq = %d\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned char const cas_bit =
- spd_read(iic0_dimm_addr[dimm_num], 18);
- unsigned char cas_mask;
-
- cas_available &= cas_bit;
- for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
- if (cas_bit & cas_mask)
- break;
- }
- debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
- cas_bit, cas_mask);
-
- for (cas_index = 0; cas_index < 3;
- cas_mask >>= 1, cas_index++) {
- unsigned long cycle_time_ps;
-
- if (!(cas_available & cas_mask)) {
- continue;
- }
- cycle_time_ps =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
- tcyc_addr[cas_index]));
-
- debug("cas_index = %d: cycle_time_ps = %d\n",
- cas_index, cycle_time_ps);
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- switch (cas_mask) {
- case 0x20:
- max_5_0_tcyc_ps =
- max(max_5_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x10:
- max_4_0_tcyc_ps =
- max(max_4_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x08:
- max_3_0_tcyc_ps =
- max(max_3_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x04:
- max_2_0_tcyc_ps =
- max(max_2_0_tcyc_ps, cycle_time_ps);
- break;
- }
- }
- }
- }
- debug("cas_available (bit map) = 0x%02X\n", cas_available);
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
- debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
- debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
- debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
- debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
-
- if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
- *cas_latency = 2;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
- DDR0_03_CASLAT_LIN_ENCODE(0x4);
- } else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
- *cas_latency = 3;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
- DDR0_03_CASLAT_LIN_ENCODE(0x6);
- } else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
- *cas_latency = 4;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
- DDR0_03_CASLAT_LIN_ENCODE(0x8);
- } else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
- *cas_latency = 5;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
- DDR0_03_CASLAT_LIN_ENCODE(0xA);
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the "
- "installed DIMMs.\n");
- printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
- "and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range "
- "of the DIMMs.\n");
- printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
- "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
- cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang();
- }
- debug("CAS latency = %d\n", *cas_latency);
- mtsdram(DDR0_03, ddr0_03);
-}
-
-static void program_ddr0_04(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rc_ps = 0;
- unsigned long t_rrd_ps = 0;
- unsigned long t_rtp_ps = 0;
- unsigned long t_rc_clk;
- unsigned long t_rrd_clk;
- unsigned long t_rtp_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
- switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rc_ps = max(t_rc_ps, ps);
- /* tRRD */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
- t_rrd_ps = max(t_rrd_ps, ps);
- /* tRTP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
- t_rtp_ps = max(t_rtp_ps, ps);
- }
- }
- debug("t_rc_ps = %d\n", t_rc_ps);
- t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rrd_ps = %d\n", t_rrd_ps);
- t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rtp_ps = %d\n", t_rtp_ps);
- t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
- DDR0_04_TRRD_ENCODE(t_rrd_clk) |
- DDR0_04_TRTP_ENCODE(t_rtp_clk));
-}
-
-static void program_ddr0_05(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rp_ps = 0;
- unsigned long t_ras_ps = 0;
- unsigned long t_rp_clk;
- unsigned long t_ras_clk;
- u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
- t_rp_ps = max(t_rp_ps, ps);
- /* tRAS */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
- t_ras_ps = max(t_ras_ps, ps);
- }
- }
- debug("t_rp_ps = %d\n", t_rp_ps);
- t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
- debug("t_ras_ps = %d\n", t_ras_ps);
- t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
- DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
-}
-
-static void program_ddr0_06(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned char spd_40;
- unsigned long t_wtr_ps = 0;
- unsigned long t_rfc_ps = 0;
- unsigned long t_wtr_clk;
- unsigned long t_rfc_clk;
- u32 ddr0_06 =
- DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tWTR */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
- t_wtr_ps = max(t_wtr_ps, ps);
- /* tRFC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
- spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
- ps += 256000 * (spd_40 & 0x01);
- switch ((spd_40 & 0x0E) >> 1) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rfc_ps = max(t_rfc_ps, ps);
- }
- }
- debug("t_wtr_ps = %d\n", t_wtr_ps);
- t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rfc_ps = %d\n", t_rfc_ps);
- t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
- DDR0_06_TRFC_ENCODE(t_rfc_clk));
-}
-
-static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
-{
- unsigned long csmap;
-
- if (2 == ranks) {
- /* Both chip selects in use */
- csmap = 0x03;
- } else {
- /* One chip select in use */
- csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
- }
- mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
- DDR0_10_CS_MAP_ENCODE(csmap) |
- DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
-}
-
-static void program_ddr0_11(unsigned long sdram_freq)
-{
- unsigned long const t_xsnr_ps = 200000; /* 200 ns */
- unsigned long t_xsnr_clk;
-
- debug("t_xsnr_ps = %d\n", t_xsnr_ps);
- t_xsnr_clk =
- (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
- DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
-}
-
-static void program_ddr0_22(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks, unsigned long width)
-{
-#if defined(CONFIG_DDR_ECC)
- unsigned long dimm_num;
- unsigned long ecc_available = width >= 64;
- u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- /* Check for ECC */
- if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
- 0x02)) {
- ecc_available = FALSE;
- }
- }
- }
- if (ecc_available) {
- debug("ECC found on all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
- } else {
- debug("ECC not found on some or all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
- }
-#else
- mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
- DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
-#endif /* defined(CONFIG_DDR_ECC) */
-}
-
-static void program_ddr0_24(unsigned long ranks)
-{
- u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) | /* 75 ohm */
- DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
-
- if (2 == ranks) {
- /* Both chip selects in use */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
- } else {
- /* One chip select in use */
- /* One of the two fields added to ddr0_24 is a "don't care" */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
- }
- mtsdram(DDR0_24, ddr0_24);
-}
-
-static void program_ddr0_26(unsigned long sdram_freq)
-{
- unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
- /* TODO: check definition of tRAS_MAX */
- unsigned long const t_ras_max_ps = 9 * t_ref_ps;
- unsigned long t_ras_max_clk;
- unsigned long t_ref_clk;
-
- /* Round down t_ras_max_clk and t_ref_clk */
- debug("t_ras_max_ps = %d\n", t_ras_max_ps);
- t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
- debug("t_ref_ps = %d\n", t_ref_ps);
- t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
- mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
- DDR0_26_TREF_ENCODE(t_ref_clk));
-}
-
-static void program_ddr0_27(unsigned long sdram_freq)
-{
- unsigned long const t_init_ps = 200000000; /* 200 us. init */
- unsigned long t_init_clk;
-
- debug("t_init_ps = %d\n", t_init_ps);
- t_init_clk =
- (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
- DDR0_27_TINIT_ENCODE(t_init_clk));
-}
-
-static void program_ddr0_43(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long cols, unsigned long banks)
-{
- unsigned long dimm_num;
- unsigned long t_wr_ps = 0;
- unsigned long t_wr_clk;
- u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
- DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
- DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
- t_wr_ps = max(t_wr_ps, ps);
- }
- }
- debug("t_wr_ps = %d\n", t_wr_ps);
- t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
-}
-
-static void program_ddr0_44(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rcd_ps = 0;
- unsigned long t_rcd_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
- t_rcd_ps = max(t_rcd_ps, ps);
- }
- }
- debug("t_rcd_ps = %d\n", t_rcd_ps);
- t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_ranks[MAXDIMMS];
- unsigned long ranks;
- unsigned long rows;
- unsigned long banks;
- unsigned long cols;
- unsigned long width;
- unsigned long const sdram_freq = get_bus_freq(0);
- unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr); /* on board dimm banks */
- unsigned long cas_latency = 0; /* to quiet initialization warning */
- unsigned long dram_size;
-
- debug("\nEntering initdram()\n");
-
- /*------------------------------------------------------------------
- * Stop the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*------------------------------------------------------------------
- * Check and get size information.
- *-----------------------------------------------------------------*/
- get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
- &cols, &width);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program registers for SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
- DDR0_00_DLL_START_POINT_DECODE(0x0A));
-
- mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
- DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
- DDR0_01_INT_MASK_ENCODE(0xFF));
-
- program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- rows, &cas_latency);
-
- program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*
- * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
- * board SDRAM, but may be overly conservative.
- */
- mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
- DDR0_07_TFAW_ENCODE(13) |
- DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
- DDR0_07_AREFRESH_ENCODE(0));
-
- mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
- DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
- DDR0_08_DDRII_ENCODE(1));
-
- mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
- DDR0_09_RTT_0_ENCODE(0x1) |
- DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
-
- program_ddr0_10(dimm_ranks, ranks);
-
- program_ddr0_11(sdram_freq);
-
- mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
-
- mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
- DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
- DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
-
- mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
-
- mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
-
- program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
-
- mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
- DDR0_23_FWC_ENCODE(0));
-
- program_ddr0_24(ranks);
-
- program_ddr0_26(sdram_freq);
-
- program_ddr0_27(sdram_freq);
-
- mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
- DDR0_28_EMRS2_DATA_ENCODE(0x0000));
-
- mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
-
- mtsdram(DDR0_42, DDR0_42_ADDR_PINS_ENCODE(14 - rows) |
- DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
-
- program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- cols, banks);
-
- program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- denali_sdram_register_dump();
-
- dram_size = (width >= 64) ? 8 : 4;
- dram_size *= 1 << cols;
- dram_size *= banks;
- dram_size *= 1 << rows;
- dram_size *= ranks;
- debug("dram_size = %lu\n", dram_size);
-
- /* Start the SDRAM controler */
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
- denali_wait_for_dlllock();
-
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Map the first 1 MiB of memory in the TLB, and perform the data eye
- * search.
- */
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
- denali_core_search_data_eye();
- denali_sdram_register_dump();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
-#endif
-
-#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
- sync();
- /* Zero the memory */
- debug("Zeroing SDRAM...");
-#if defined(CONFIG_SYS_MEM_TOP_HIDE)
- dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
-#else
-#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
-#endif
- /* Write modified dcache lines back to memory */
- clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
- debug("Completed\n");
- sync();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
-
-#if defined(CONFIG_DDR_ECC)
- /*
- * If ECC is enabled, clear and enable interrupts
- */
- if (is_ecc_enabled()) {
- u32 val;
-
- sync();
- /* Clear error status */
- mfsdram(DDR0_00, val);
- mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
- /* Set 'int_mask' parameter to functionnal value */
- mfsdram(DDR0_01, val);
- mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
- DDR0_01_INT_MASK_ALL_OFF);
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Running denali_core_search_data_eye() when ECC is enabled
- * causes non-ECC machine checks. This clears them.
- */
- print_mcsr();
- mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
- print_mcsr();
-#endif
- sync();
- }
-#endif /* defined(CONFIG_DDR_ECC) */
-#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
-
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
- return dram_size;
-}
-
-void board_add_ram_info(int use_default)
-{
- u32 val;
-
- printf(" (ECC");
- if (!is_ecc_enabled()) {
- printf(" not");
- }
- printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
-
- mfsdram(DDR0_03, val);
- printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
-}
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c
deleted file mode 100644
index f105605..0000000
--- a/cpu/ppc4xx/ecc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2005-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements generic DRAM ECC initialization for
- * PowerPC processors using a SDRAM DDR/DDR2 controller,
- * including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
- * 460EX/GT.
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
- defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
-
-#if defined(CONFIG_405EX)
-/*
- * Currently only 405EX uses 16bit data bus width as an alternative
- * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
- */
-#define SDRAM_DATA_ALT_WIDTH 2
-#else
-#define SDRAM_DATA_ALT_WIDTH 8
-#endif
-
-static void wait_ddr_idle(void)
-{
- u32 val;
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
-}
-
-static void program_ecc_addr(unsigned long start_address,
- unsigned long num_bytes,
- unsigned long tlb_word2_i_value)
-{
- unsigned long current_address;
- unsigned long end_address;
- unsigned long address_increment;
- unsigned long mcopt1;
- char str[] = "ECC generation -";
- char slash[] = "\\|/-\\|/-";
- int loop = 0;
- int loopi = 0;
-
- current_address = start_address;
- mfsdram(SDRAM_MCOPT1, mcopt1);
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
- sync();
- eieio();
- wait_ddr_idle();
-
- puts(str);
-
-#ifdef CONFIG_440
- if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
-#endif
- /* ECC bit set method for non-cached memory */
- if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
- address_increment = 4;
- else
- address_increment = SDRAM_DATA_ALT_WIDTH;
- end_address = current_address + num_bytes;
-
- while (current_address < end_address) {
- *((unsigned long *)current_address) = 0;
- current_address += address_increment;
-
- if ((loop++ % (2 << 20)) == 0) {
- putc('\b');
- putc(slash[loopi++ % 8]);
- }
- }
-#ifdef CONFIG_440
- } else {
- /* ECC bit set method for cached memory */
- dcbz_area(start_address, num_bytes);
- /* Write modified dcache lines back to memory */
- clean_dcache_range(start_address, start_address + num_bytes);
- }
-#endif /* CONFIG_440 */
-
- blank_string(strlen(str));
-
- sync();
- eieio();
- wait_ddr_idle();
-
- /* clear ECC error repoting registers */
- mtsdram(SDRAM_ECCES, 0xffffffff);
- mtdcr(0x4c, 0xffffffff);
-
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
- sync();
- eieio();
- wait_ddr_idle();
- }
-}
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-void ecc_init(unsigned long * const start, unsigned long size)
-{
- /*
- * Init ECC with cache disabled (on PPC's with IBM DDR
- * controller (non DDR2), not tested with cache enabled yet
- */
- program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
-}
-#endif
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-void do_program_ecc(unsigned long tlb_word2_i_value)
-{
- unsigned long mcopt1;
- unsigned long mcopt2;
- unsigned long mcstat;
- phys_size_t memsize = sdram_memsize();
-
- if (memsize > CONFIG_MAX_MEM_MAPPED) {
- printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
- return;
- }
-
- mfsdram(SDRAM_MCOPT1, mcopt1);
- mfsdram(SDRAM_MCOPT2, mcopt2);
-
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- /* DDR controller must be enabled and not in self-refresh. */
- mfsdram(SDRAM_MCSTAT, mcstat);
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
-
- program_ecc_addr(0, memsize, tlb_word2_i_value);
- }
- }
-}
-#endif
-
-#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
-#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h
deleted file mode 100644
index b258891..0000000
--- a/cpu/ppc4xx/ecc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * Copyright (c) 2007-2009 DENX Software Engineering, GmbH
- * Stefan Roese <sr@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements ECC initialization for PowerPC processors
- * using the IBM SDRAM DDR1 & DDR2 controller.
- *
- */
-
-#ifndef _ECC_H_
-#define _ECC_H_
-
-/*
- * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
- * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
- * we need to make some processor dependant defines used later on by the
- * driver.
- */
-
-/* For 440GP/GX/EP/GR */
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-#define SDRAM_MCOPT1 SDRAM_CFG0
-#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK
-#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON
-#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN
-#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK
-#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32
-
-#define SDRAM_MCSTAT SDRAM0_MCSTS
-#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS
-#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT
-
-#define SDRAM_ECCES SDRAM0_ECCESR
-#endif
-
-void ecc_init(unsigned long * const start, unsigned long size);
-void do_program_ecc(unsigned long tlb_word2_i_value);
-
-static void inline blank_string(int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- putc('\b');
- for (i = 0; i < size; i++)
- putc(' ');
- for (i = 0; i < size; i++)
- putc('\b');
-}
-
-#endif /* _ECC_H_ */
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
deleted file mode 100644
index 15a184b..0000000
--- a/cpu/ppc4xx/fdt.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#include <asm/4xx_pcie.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void __ft_board_setup(void *blob, bd_t *bd)
-{
- int rc;
- int i;
- u32 bxcr;
- u32 ranges[EBC_NUM_BANKS * 4];
- u32 *p = ranges;
- char ebc_path[] = "/plb/opb/ebc";
-
- ft_cpu_setup(blob, bd);
-
- /*
- * Read 4xx EBC bus bridge registers to get mappings of the
- * peripheral banks into the OPB/PLB address space
- */
- for (i = 0; i < EBC_NUM_BANKS; i++) {
- mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
- bxcr = mfdcr(EBC0_CFGDATA);
-
- if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
- *p++ = i;
- *p++ = 0;
- *p++ = bxcr & EBC_BXCR_BAS_MASK;
- *p++ = EBC_BXCR_BANK_SIZE(bxcr);
-
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Try to update reg property in nor flash node too */
- fdt_fixup_nor_flash_size(blob, i,
- EBC_BXCR_BANK_SIZE(bxcr));
-#endif
- }
- }
-
- /* Some 405 PPC's have EBC as direct PLB child in the dts */
- if (fdt_path_offset(blob, ebc_path) < 0)
- strcpy(ebc_path, "/plb/ebc");
- rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
- (p - ranges) * sizeof(u32), 1);
- if (rc) {
- printf("Unable to update property EBC mappings, err=%s\n",
- fdt_strerror(rc));
- }
-}
-void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
-
-/*
- * Fixup all PCIe nodes by setting the device_type property
- * to "pci-endpoint" instead is "pci" for endpoint ports.
- * This property will get checked later by the Linux driver
- * to properly configure the PCIe port in Linux (again).
- */
-void fdt_pcie_setup(void *blob)
-{
- const char *compat = "ibm,plb-pciex";
- const char *prop = "device_type";
- const char *prop_val = "pci-endpoint";
- const u32 *port;
- int no;
- int rc;
-
- /* Search first PCIe node */
- no = fdt_node_offset_by_compatible(blob, -1, compat);
- while (no != -FDT_ERR_NOTFOUND) {
- port = fdt_getprop(blob, no, "port", NULL);
- if (port == NULL) {
- printf("WARNING: could not find port property\n");
- } else {
- if (is_end_point(*port)) {
- rc = fdt_setprop(blob, no, prop, prop_val,
- strlen(prop_val) + 1);
- if (rc < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop, compat, fdt_strerror(rc));
- }
- }
-
- /* Jump to next PCIe node */
- no = fdt_node_offset_by_compatible(blob, no, compat);
- }
-}
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- sys_info_t sys_info;
- int off, ndepth = 0;
-
- get_sys_info(&sys_info);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
- do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
-
- if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
- do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
- else
- do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- /*
- * Fixup all UART clocks for CPU internal UARTs
- * (only these UARTs are definitely clocked by gd->uart_clk)
- *
- * These UARTs are direct childs of /plb/opb. This code
- * does not touch any UARTs that are connected to the ebc.
- */
- off = fdt_path_offset(blob, "/plb/opb");
- while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
- /*
- * process all sub nodes and stop when we are back
- * at the starting depth
- */
- if (ndepth <= 0)
- break;
-
- /* only update direct childs */
- if ((ndepth == 1) &&
- (fdt_node_check_compatible(blob, off, "ns16550") == 0))
- fdt_setprop(blob, off,
- "clock-frequency",
- (void*)&(gd->uart_clk), 4);
- }
-
- /*
- * Fixup all ethernet nodes
- * Note: aliases in the dts are required for this
- */
- fdt_fixup_ethernet(blob);
-
- /*
- * Fixup all available PCIe nodes by setting the device_type property
- */
- fdt_pcie_setup(blob);
-}
-#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
deleted file mode 100644
index c0d351a..0000000
--- a/cpu/ppc4xx/gpio.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
-#endif
-
-#if defined(GPIO0_OSRL)
-/* Only some 4xx variants support alternate funtions on the GPIO's */
-void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
-{
- u32 mask;
- u32 mask2;
- u32 val;
- u32 offs = 0;
- u32 offs2 = 0;
- int pin2 = pin << 1;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (pin >= GPIO_MAX/2) {
- offs2 = 0x4;
- pin2 = (pin - GPIO_MAX/2) << 1;
- }
-
- mask = 0x80000000 >> pin;
- mask2 = 0xc0000000 >> pin2;
-
- /* first set TCR to 0 */
- out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
-
- if (in_out == GPIO_OUT) {
- val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
- switch (gpio_alt) {
- case GPIO_ALT1:
- val |= GPIO_ALT1_SEL >> pin2;
- break;
- case GPIO_ALT2:
- val |= GPIO_ALT2_SEL >> pin2;
- break;
- case GPIO_ALT3:
- val |= GPIO_ALT3_SEL >> pin2;
- break;
- }
- out_be32((void *)GPIO0_OSRL + offs + offs2, val);
-
- /* setup requested output value */
- if (out_val == GPIO_OUT_0)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~mask);
- else if (out_val == GPIO_OUT_1)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | mask);
-
- /* now configure TCR to drive output if selected */
- out_be32((void *)GPIO0_TCR + offs,
- in_be32((void *)GPIO0_TCR + offs) | mask);
- } else {
- val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
- val |= GPIO_IN_SEL >> pin2;
- out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
- }
-}
-#endif /* GPIO_OSRL */
-
-void gpio_write_bit(int pin, int val)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (val)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
- else
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
-}
-
-int gpio_read_out_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-int gpio_read_in_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-void gpio_set_chip_configuration(void)
-{
- unsigned char i=0, j=0, offs=0, gpio_core;
- unsigned long reg, core_add;
-
- for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
- j = 0;
- offs = 0;
- /* GPIO config of the GPIOs 0 to 31 */
- for (i=0; i<GPIO_MAX; i++, j++) {
- if (i == GPIO_MAX/2) {
- offs = 4;
- j = i-16;
- }
-
- core_add = gpio_tab[gpio_core][i].add;
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- break;
-
- case GPIO_ALT1:
- reg = in_be32((void *)GPIO_IS1(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS1(core_add+offs), reg);
- break;
-
- case GPIO_ALT2:
- reg = in_be32((void *)GPIO_IS2(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS2(core_add+offs), reg);
- break;
-
- case GPIO_ALT3:
- reg = in_be32((void *)GPIO_IS3(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS3(core_add+offs), reg);
- break;
- }
- }
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- u32 gpio_alt_sel = 0;
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- /*
- * Setup output value
- * 1 -> high level
- * 0 -> low level
- * else -> don't touch
- */
- reg = in_be32((void *)GPIO_OR(core_add));
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
- reg |= (0x80000000 >> (i));
- else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
- reg &= ~(0x80000000 >> (i));
- out_be32((void *)GPIO_OR(core_add), reg);
-
- reg = in_be32((void *)GPIO_TCR(core_add)) |
- (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
-
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- break;
-
- case GPIO_ALT1:
- gpio_alt_sel = GPIO_ALT1_SEL;
- break;
-
- case GPIO_ALT2:
- gpio_alt_sel = GPIO_ALT2_SEL;
- break;
-
- case GPIO_ALT3:
- gpio_alt_sel = GPIO_ALT3_SEL;
- break;
- }
-
- if (0 != gpio_alt_sel) {
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
-
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
- reg = in_be32((void *)GPIO_TCR(core_add))
- | (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- } else {
- reg = in_be32((void *)GPIO_TCR(core_add))
- & ~(0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- }
- }
- }
- }
- }
-}
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
deleted file mode 100644
index 6db8421..0000000
--- a/cpu/ppc4xx/interrupts.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * CPM interrupt vector functions.
- */
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-static struct irq_action irq_vecs[IRQ_MAX];
-
-#if defined(CONFIG_440)
-
-/* SPRN changed in 440 */
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtspr 0x03f,%0" : : "r" (val));
-}
-
-#else /* !defined(CONFIG_440) */
-
-static __inline__ void set_pit(unsigned long val)
-{
- asm volatile("mtpit %0" : : "r" (val));
-}
-
-
-static __inline__ void set_tcr(unsigned long val)
-{
- asm volatile("mttcr %0" : : "r" (val));
-}
-
-
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtevpr %0" : : "r" (val));
-}
-#endif /* defined(CONFIG_440 */
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- int vec;
- unsigned long val;
-
- /* decrementer is automatically reloaded */
- *decrementer_count = 0;
-
- /*
- * Mark all irqs as free
- */
- for (vec = 0; vec < IRQ_MAX; vec++) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
-#ifdef CONFIG_4xx
- /*
- * Init PIT
- */
-#if defined(CONFIG_440)
- val = mfspr( SPRN_TCR );
- val &= (~0x04400000); /* clear DIS & ARE */
- mtspr( SPRN_TCR, val );
- mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
- mtspr( SPRN_DECAR, 0 ); /* clear reload */
- mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
- val = gd->bd->bi_intfreq/1000; /* 1 msec */
- mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
- mtspr( SPRN_DEC, val ); /* Set inital val */
-#else
- set_pit(gd->bd->bi_intfreq / 1000);
-#endif
-#endif /* CONFIG_4xx */
-
-#ifdef CONFIG_ADCIOP
- /*
- * Init PIT
- */
- set_pit(66000);
-#endif
-
- /*
- * Enable PIT
- */
- val = mfspr(SPRN_TCR);
- val |= 0x04400000;
- mtspr(SPRN_TCR, val);
-
- /*
- * Set EVPR to 0
- */
- set_evpr(0x00000000);
-
- /*
- * Call uic or xilinx_irq pic_enable
- */
- pic_enable();
-
- return (0);
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-void interrupt_run_handler(int vec)
-{
- irq_vecs[vec].count++;
-
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
- } else {
- pic_irq_disable(vec);
- printf("Masking bogus interrupt vector %d\n", vec);
- }
-
- pic_irq_ack(vec);
- return;
-}
-
-void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
-{
- /*
- * Print warning when replacing with a different irq vector
- */
- if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
- printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
- vec, (uint) handler, (uint) irq_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
-
- pic_irq_enable(vec);
- return;
-}
-
-void irq_free_handler(int vec)
-{
- debug("Free interrupt for vector %d ==> %p\n",
- vec, irq_vecs[vec].handler);
-
- pic_irq_disable(vec);
-
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("Interrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec = 0; vec < IRQ_MAX; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
-
- return 0;
-}
-#endif
diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c
deleted file mode 100644
index 0e3423f..0000000
--- a/cpu/ppc4xx/iop480_uart.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE 0x40000000
-
-#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
-#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
-#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
-#define spu_BRateDivh 0x10 /* Baud rate divisor high */
-#define spu_BRateDivl 0x14 /* Baud rate divisor low */
-#define spu_CtlReg 0x18 /* Control Register */
-#define spu_RxCmd 0x1c /* Rx Command Register */
-#define spu_TxCmd 0x20 /* Tx Command Register */
-#define spu_RxBuff 0x24 /* Rx data buffer */
-#define spu_TxBuff 0x24 /* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRport1 0x40000000
-#define asyncLSRport1set 0x40000004
-#define asyncLSRDataReady 0x80
-#define asyncLSRFramingError 0x40
-#define asyncLSROverrunError 0x20
-#define asyncLSRParityError 0x10
-#define asyncLSRBreakInterrupt 0x08
-#define asyncLSRTxHoldEmpty 0x04
-#define asyncLSRTxShiftEmpty 0x02
-
-/*-----------------------------------------------------------------------------+
- | Handshake Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncHSRport1 0x40000008
-#define asyncHSRport1set 0x4000000c
-#define asyncHSRDsr 0x80
-#define asyncLSRCts 0x40
-
-/*-----------------------------------------------------------------------------+
- | Control Register.
- +-----------------------------------------------------------------------------*/
-#define asyncCRport1 0x40000018
-#define asyncCRNormal 0x00
-#define asyncCRLoopback 0x40
-#define asyncCRAutoEcho 0x80
-#define asyncCRDtr 0x20
-#define asyncCRRts 0x10
-#define asyncCRWordLength7 0x00
-#define asyncCRWordLength8 0x08
-#define asyncCRParityDisable 0x00
-#define asyncCRParityEnable 0x04
-#define asyncCREvenParity 0x00
-#define asyncCROddParity 0x02
-#define asyncCRStopBitsOne 0x00
-#define asyncCRStopBitsTwo 0x01
-#define asyncCRDisableDtrRts 0x00
-
-/*-----------------------------------------------------------------------------+
- | Receiver Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncRCRport1 0x4000001c
-#define asyncRCRDisable 0x00
-#define asyncRCREnable 0x80
-#define asyncRCRIntDisable 0x00
-#define asyncRCRIntEnabled 0x20
-#define asyncRCRDMACh2 0x40
-#define asyncRCRDMACh3 0x60
-#define asyncRCRErrorInt 0x10
-#define asyncRCRPauseEnable 0x08
-
-/*-----------------------------------------------------------------------------+
- | Transmitter Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncTCRport1 0x40000020
-#define asyncTCRDisable 0x00
-#define asyncTCREnable 0x80
-#define asyncTCRIntDisable 0x00
-#define asyncTCRIntEnabled 0x20
-#define asyncTCRDMACh2 0x40
-#define asyncTCRDMACh3 0x60
-#define asyncTCRTxEmpty 0x10
-#define asyncTCRErrorInt 0x08
-#define asyncTCRStopPause 0x04
-#define asyncTCRBreakGen 0x02
-
-/*-----------------------------------------------------------------------------+
- | Miscellanies defines.
- +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1 0x40000024
-#define asyncRxBufferport1 0x40000024
-#define asyncDLABLsbport1 0x40000014
-#define asyncDLABMsbport1 0x40000010
-#define asyncXOFFchar 0x13
-#define asyncXONchar 0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-int serial_init (void)
-{
- volatile char val;
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- /*
- * Init onboard UART
- */
- out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
- out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
- out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
- out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
- out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
-
- return (0);
-}
-
-void serial_setbrg (void)
-{
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- out_8((u8 *)SPU_BASE + spu_BRateDivl,
- (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh,
- ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-void serial_putc (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- /* load status from handshake register */
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
-
- out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
-
- while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- }
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc ()
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- break;
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt );
- }
- }
- return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
-}
-
-int serial_tstc ()
-{
- unsigned char status;
-
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- return (1);
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt);
- }
- return 0;
-}
-
-#endif /* CONFIG_IOP480 */
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
deleted file mode 100644
index 4227a4c..0000000
--- a/cpu/ppc4xx/kgdb.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <version.h>
-
-#define CONFIG_405GP 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- /* icache */
- iccci r0,r0 /* iccci invalidates the entire I cache */
- /* dcache */
- addi r6,0,0x0000 /* clear GPR 6 */
- addi r7,r0, 128 /* do loop for # of dcache lines */
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6, 32 /* bump to next line */
- bdnz ..dcloop
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
deleted file mode 100644
index 22ed5c2..0000000
--- a/cpu/ppc4xx/miiphy.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*-----------------------------------------------------------------------------+
- | This source code is dual-licensed. You may use it under the terms of the
- | GNU General Public License version 2, or under the license below.
- |
- | This source code has been made available to you by IBM on an AS-IS
- | basis. Anyone receiving this source is licensed under IBM
- | copyrights to use it in any way he or she deems fit, including
- | copying it, modifying it, compiling it, and redistributing it either
- | with or without modifications. No license under IBM patents or
- | patent applications is to be implied by the copyright license.
- |
- | Any user of this software should understand that IBM cannot provide
- | technical support for this software and will not be responsible for
- | any consequences resulting from the use of this software.
- |
- | Any person who transfers this source code or any derivative work
- | must include the IBM copyright notice, this paragraph, and the
- | preceding two paragraphs in the transferred software.
- |
- | COPYRIGHT I B M CORPORATION 1995
- | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- +-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
- |
- | File Name: miiphy.c
- |
- | Function: This module has utilities for accessing the MII PHY through
- | the EMAC3 macro.
- |
- | Author: Mark Wisner
- |
- +-----------------------------------------------------------------------------*/
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <ppc4xx_enet.h>
-#include <405_mal.h>
-#include <miiphy.h>
-
-#if !defined(CONFIG_PHY_CLK_FREQ)
-#define CONFIG_PHY_CLK_FREQ 0
-#endif
-
-/***********************************************************/
-/* Dump out to the screen PHY regs */
-/***********************************************************/
-
-void miiphy_dump (char *devname, unsigned char addr)
-{
- unsigned long i;
- unsigned short data;
-
- for (i = 0; i < 0x1A; i++) {
- if (miiphy_read (devname, addr, i, &data)) {
- printf ("read error for reg %lx\n", i);
- return;
- }
- printf ("Phy reg %lx ==> %4x\n", i, data);
-
- /* jump to the next set of regs */
- if (i == 0x07)
- i = 0x0f;
-
- } /* end for loop */
-} /* end dump */
-
-/***********************************************************/
-/* (Re)start autonegotiation */
-/***********************************************************/
-int phy_setup_aneg (char *devname, unsigned char addr)
-{
- u16 bmcr;
-
-#if defined(CONFIG_PHY_DYNAMIC_ANEG)
- /*
- * Set up advertisement based on capablilities reported by the PHY.
- * This should work for both copper and fiber.
- */
- u16 bmsr;
-#if defined(CONFIG_PHY_GIGE)
- u16 exsr = 0x0000;
-#endif
-
- miiphy_read (devname, addr, PHY_BMSR, &bmsr);
-
-#if defined(CONFIG_PHY_GIGE)
- if (bmsr & PHY_BMSR_EXT_STAT)
- miiphy_read (devname, addr, PHY_EXSR, &exsr);
-
- if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
- /* 1000BASE-X */
- u16 anar = 0x0000;
-
- if (exsr & PHY_EXSR_1000XF)
- anar |= PHY_X_ANLPAR_FD;
-
- if (exsr & PHY_EXSR_1000XH)
- anar |= PHY_X_ANLPAR_HD;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
- } else
-#endif
- {
- u16 anar, btcr;
-
- miiphy_read (devname, addr, PHY_ANAR, &anar);
- anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
- btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
-
- if (bmsr & PHY_BMSR_100T4)
- anar |= PHY_ANLPAR_T4;
-
- if (bmsr & PHY_BMSR_100TXF)
- anar |= PHY_ANLPAR_TXFD;
-
- if (bmsr & PHY_BMSR_100TXH)
- anar |= PHY_ANLPAR_TX;
-
- if (bmsr & PHY_BMSR_10TF)
- anar |= PHY_ANLPAR_10FD;
-
- if (bmsr & PHY_BMSR_10TH)
- anar |= PHY_ANLPAR_10;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
-
-#if defined(CONFIG_PHY_GIGE)
- if (exsr & PHY_EXSR_1000TF)
- btcr |= PHY_1000BTCR_1000FD;
-
- if (exsr & PHY_EXSR_1000TH)
- btcr |= PHY_1000BTCR_1000HD;
-
- miiphy_write (devname, addr, PHY_1000BTCR, btcr);
-#endif
- }
-
-#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
- /*
- * Set up standard advertisement
- */
- u16 adv;
-
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD | PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &adv);
- adv |= (0x0300);
- miiphy_write (devname, addr, PHY_1000BTCR, adv);
-
-#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
-
- /* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &bmcr);
- bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, bmcr);
-
- return 0;
-}
-
-/***********************************************************/
-/* read a phy reg and return the value with a rc */
-/***********************************************************/
-/* AMCC_TODO:
- * Find out of the choice for the emac for MDIO is from the bridges,
- * i.e. ZMII or RGMII as approporiate. If the bridges are not used
- * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
- * used? If so, then this routine below does not apply to the 460EX/GT.
- *
- * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
- * return EMAC0 offset here
- * vg: For 460EX/460GT if internal GPCS PHY address is specified
- * return appropriate EMAC offset
- */
-unsigned int miiphy_getemac_offset(u8 addr)
-{
-#if (defined(CONFIG_440) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
- defined(CONFIG_NET_MULTI)
- unsigned long zmii;
- unsigned long eoffset;
-
- /* Need to find out which mdi port we're using */
- zmii = in_be32((void *)ZMII0_FER);
-
- if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
- /* using port 0 */
- eoffset = 0;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
- /* using port 1 */
- eoffset = 0x100;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
- /* using port 2 */
- eoffset = 0x400;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
- /* using port 3 */
- eoffset = 0x600;
-
- else {
- /* None of the mdi ports are enabled! */
- /* enable port 0 */
- zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
- out_be32((void *)ZMII0_FER, zmii);
- eoffset = 0;
- /* need to soft reset port 0 */
- zmii = in_be32((void *)EMAC0_MR0);
- zmii |= EMAC_MR0_SRST;
- out_be32((void *)EMAC0_MR0, zmii);
- }
-
- return (eoffset);
-#else
-
-#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
- unsigned long rgmii;
- int devnum = 1;
-
- rgmii = in_be32((void *)RGMII_FER);
- if (rgmii & (1 << (19 - devnum)))
- return 0x100;
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 eoffset = 0;
-
- switch (addr) {
-#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
- case CONFIG_GPCS_PHY1_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
- eoffset = 0x100;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
- case CONFIG_GPCS_PHY2_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
- eoffset = 0x300;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
- case CONFIG_GPCS_PHY3_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
- eoffset = 0x400;
- break;
-#endif
- default:
- eoffset = 0;
- break;
- }
- return eoffset;
-#endif
-
- return 0;
-#endif
-}
-
-static int emac_miiphy_wait(u32 emac_reg)
-{
- u32 sta_reg;
- int i;
-
- /* wait for completion */
- i = 0;
- do {
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- if (i++ > 5) {
- debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
- __LINE__, sta_reg);
- return -1;
- }
- udelay(10);
- } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
-
- return 0;
-}
-
-static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
-{
- u32 emac_reg;
- u32 sta_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- sta_reg = reg; /* reg address */
-
- /* set clock (50MHz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
-#else
- sta_reg |= cmd;
-#endif
-#else
- sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
- /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
- sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
- sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
- if (cmd == EMAC_STACR_WRITE)
- memcpy(&sta_reg, &value, 2); /* put in data */
-
- out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
-
- return 0;
-}
-
-int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
-{
- unsigned long sta_reg;
- unsigned long emac_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
- return -1;
-
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- *value = sta_reg >> 16;
-
- return 0;
-}
-
-/***********************************************************/
-/* write a phy reg and return the value with a rc */
-/***********************************************************/
-
-int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
- unsigned short value)
-{
- return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
-}
diff --git a/cpu/ppc4xx/reginfo.c b/cpu/ppc4xx/reginfo.c
deleted file mode 100644
index a975667..0000000
--- a/cpu/ppc4xx/reginfo.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- *(C) Copyright 2005-2009 Netstal Maschinen AG
- * Bruno Hars (Bruno.Hars@netstal.com)
- * Niklaus Giger (Niklaus.Giger@netstal.com)
- *
- * This source code is free software; you can redistribute it
- * and/or modify it in source code form under the terms of the GNU
- * General Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-/*
- * reginfo.c - register dump of HW-configuratin register for PPC4xx based board
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-uic.h>
-#include <ppc4xx_enet.h>
-
-enum REGISTER_TYPE {
- IDCR1, /* Indirectly Accessed DCR via SDRAM0_CFGADDR/SDRAM0_CFGDATA */
- IDCR2, /* Indirectly Accessed DCR via EBC0_CFGADDR/EBC0_CFGDATA */
- IDCR3, /* Indirectly Accessed DCR via EBM0_CFGADDR/EBM0_CFGDATA */
- IDCR4, /* Indirectly Accessed DCR via PPM0_CFGADDR/PPM0_CFGDATA */
- IDCR5, /* Indirectly Accessed DCR via CPR0_CFGADDR/CPR0_CFGDATA */
- IDCR6, /* Indirectly Accessed DCR via SDR0_CFGADDR/SDR0_CFGDATA */
- MM /* Directly Accessed MMIO Register */
-};
-
-struct cpu_register {
- char *name;
- enum REGISTER_TYPE type;
- u32 address;
-};
-
-/*
- * PPC440EPx registers ordered for output
- * name type addr size
- * -------------------------------------------
- */
-
-const struct cpu_register ppc4xx_reg[] = {
- {"PB0CR", IDCR2, PB0CR},
- {"PB0AP", IDCR2, PB0AP},
- {"PB1CR", IDCR2, PB1CR},
- {"PB1AP", IDCR2, PB1AP},
- {"PB2CR", IDCR2, PB2CR},
- {"PB2AP", IDCR2, PB2AP},
- {"PB3CR", IDCR2, PB3CR},
- {"PB3AP", IDCR2, PB3AP},
-
- {"PB4CR", IDCR2, PB4CR},
- {"PB4AP", IDCR2, PB4AP},
-#if !defined(CONFIG_405EP)
- {"PB5CR", IDCR2, PB5CR},
- {"PB5AP", IDCR2, PB5AP},
- {"PB6CR", IDCR2, PB6CR},
- {"PB6AP", IDCR2, PB6AP},
- {"PB7CR", IDCR2, PB7CR},
- {"PB7AP", IDCR2, PB7AP},
-#endif
-
- {"PBEAR", IDCR2, PBEAR},
-#if defined(CONFIG_405EP) || defined (CONFIG_405GP)
- {"PBESR0", IDCR2, PBESR0},
- {"PBESR1", IDCR2, PBESR1},
-#endif
- {"EBC0_CFG", IDCR2, EBC0_CFG},
-
-#ifdef CONFIG_405GP
- {"SDRAM0_BESR0", IDCR1, SDRAM0_BESR0},
- {"SDRAM0_BESRS0", IDCR1, SDRAM0_BESRS0},
- {"SDRAM0_BESR1", IDCR1, SDRAM0_BESR1},
- {"SDRAM0_BESRS1", IDCR1, SDRAM0_BESRS1},
- {"SDRAM0_BEAR", IDCR1, SDRAM0_BEAR},
- {"SDRAM0_CFG", IDCR1, SDRAM0_CFG},
- {"SDRAM0_RTR", IDCR1, SDRAM0_RTR},
- {"SDRAM0_PMIT", IDCR1, SDRAM0_PMIT},
-
- {"SDRAM0_B0CR", IDCR1, SDRAM0_B0CR},
- {"SDRAM0_B1CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_B2CR", IDCR1, SDRAM0_B2CR},
- {"SDRAM0_B3CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_TR", IDCR1, SDRAM0_TR},
- {"SDRAM0_ECCCFG", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_ECCESR", IDCR1, SDRAM0_ECCESR},
-
-
-#endif
-
-#ifdef CONFIG_440EPX
- {"SDR0_SDSTP0", IDCR6, SDR0_SDSTP0},
- {"SDR0_SDSTP1", IDCR6, SDR0_SDSTP1},
- {"SDR0_SDSTP2", IDCR6, SDR0_SDSTP2},
- {"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
- {"SDR0_CUST0", IDCR6, SDR0_CUST0},
- {"SDR0_CUST1", IDCR6, SDR0_CUST1},
- {"SDR0_EBC0", IDCR6, SDR0_EBC0},
- {"SDR0_AMP0", IDCR6, SD0_AMP0},
- {"SDR0_AMP1", IDCR6, SD0_AMP1},
- {"SDR0_CP440", IDCR6, SDR0_CP440},
- {"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
- {"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
- {"SDR0_EMAC0RXST", IDCR6, SDR0_EMAC0RXST},
- {"SDR0_EMAC0TXST", IDCR6, SDR0_EMAC0TXST},
- {"SDR0_MFR", IDCR6, SDR0_MFR},
- {"SDR0_PCI0", IDCR6, SDR0_PCI0},
- {"SDR0_PFC0", IDCR6, SDR0_PFC0},
- {"SDR0_PFC1", IDCR6, SDR0_PFC1},
- {"SDR0_PFC2", IDCR6, SDR0_PFC2},
- {"SDR0_PFC4", IDCR6, SDR0_PFC4},
- {"SDR0_UART0", IDCR6, SDR0_UART0},
- {"SDR0_UART1", IDCR6, SDR0_UART1},
- {"SDR0_UART2", IDCR6, SDR0_UART2},
- {"SDR0_UART3", IDCR6, SDR0_UART3},
- {"DDR0_02", IDCR1, DDR0_02},
- {"DDR0_00", IDCR1, DDR0_00},
- {"DDR0_01", IDCR1, DDR0_01},
- {"DDR0_03", IDCR1, DDR0_03},
- {"DDR0_04", IDCR1, DDR0_04},
- {"DDR0_05", IDCR1, DDR0_05},
- {"DDR0_06", IDCR1, DDR0_06},
- {"DDR0_07", IDCR1, DDR0_07},
- {"DDR0_08", IDCR1, DDR0_08},
- {"DDR0_09", IDCR1, DDR0_09},
- {"DDR0_10", IDCR1, DDR0_10},
- {"DDR0_11", IDCR1, DDR0_11},
- {"DDR0_12", IDCR1, DDR0_12},
- {"DDR0_14", IDCR1, DDR0_14},
- {"DDR0_17", IDCR1, DDR0_17},
- {"DDR0_18", IDCR1, DDR0_18},
- {"DDR0_19", IDCR1, DDR0_19},
- {"DDR0_20", IDCR1, DDR0_20},
- {"DDR0_21", IDCR1, DDR0_21},
- {"DDR0_22", IDCR1, DDR0_22},
- {"DDR0_23", IDCR1, DDR0_23},
- {"DDR0_24", IDCR1, DDR0_24},
- {"DDR0_25", IDCR1, DDR0_25},
- {"DDR0_26", IDCR1, DDR0_26},
- {"DDR0_27", IDCR1, DDR0_27},
- {"DDR0_28", IDCR1, DDR0_28},
- {"DDR0_31", IDCR1, DDR0_31},
- {"DDR0_32", IDCR1, DDR0_32},
- {"DDR0_33", IDCR1, DDR0_33},
- {"DDR0_34", IDCR1, DDR0_34},
- {"DDR0_35", IDCR1, DDR0_35},
- {"DDR0_36", IDCR1, DDR0_36},
- {"DDR0_37", IDCR1, DDR0_37},
- {"DDR0_38", IDCR1, DDR0_38},
- {"DDR0_39", IDCR1, DDR0_39},
- {"DDR0_40", IDCR1, DDR0_40},
- {"DDR0_41", IDCR1, DDR0_41},
- {"DDR0_42", IDCR1, DDR0_42},
- {"DDR0_43", IDCR1, DDR0_43},
- {"DDR0_44", IDCR1, DDR0_44},
- {"CPR0_ICFG", IDCR5, CPR0_ICFG},
- {"CPR0_MALD", IDCR5, CPR0_MALD},
- {"CPR0_OPBD00", IDCR5, CPR0_OPBD0},
- {"CPR0_PERD0", IDCR5, CPR0_PERD},
- {"CPR0_PLLC0", IDCR5, CPR0_PLLC},
- {"CPR0_PLLD0", IDCR5, CPR0_PLLD},
- {"CPR0_PRIMAD0", IDCR5, CPR0_PRIMAD0},
- {"CPR0_PRIMBD0", IDCR5, CPR0_PRIMBD0},
- {"CPR0_SPCID", IDCR5, CPR0_SPCID},
- {"SPI0_MODE", MM, SPI0_MODE},
- {"IIC0_CLKDIV", MM, PCIL0_PMM1MA},
- {"PCIL0_PMM0MA", MM, PCIL0_PMM0MA},
- {"PCIL0_PMM1MA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1MS", MM, PCIL0_PTM1MS},
- {"PCIL0_PTM2LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM2MS", MM, PCIL0_PTM2MS},
- {"ZMII0_FER", MM, ZMII0_FER},
- {"ZMII0_SSR", MM, ZMII0_SSR},
- {"EMAC0_IPGVR", MM, EMAC0_IPGVR},
- {"EMAC0_MR1", MM, EMAC0_MR1},
- {"EMAC0_PTR", MM, EMAC0_PTR},
- {"EMAC0_RWMR", MM, EMAC0_RWMR},
- {"EMAC0_STACR", MM, EMAC0_STACR},
- {"EMAC0_TMR0", MM, EMAC0_TMR0},
- {"EMAC0_TMR1", MM, EMAC0_TMR1},
- {"EMAC0_TRTR", MM, EMAC0_TRTR},
- {"EMAC1_MR1", MM, EMAC1_MR1},
- {"GPIO0_OR", MM, GPIO0_OR},
- {"GPIO1_OR", MM, GPIO1_OR},
- {"GPIO0_TCR", MM, GPIO0_TCR},
- {"GPIO1_TCR", MM, GPIO1_TCR},
- {"GPIO0_ODR", MM, GPIO0_ODR},
- {"GPIO1_ODR", MM, GPIO1_ODR},
- {"GPIO0_OSRL", MM, GPIO0_OSRL},
- {"GPIO0_OSRH", MM, GPIO0_OSRH},
- {"GPIO1_OSRL", MM, GPIO1_OSRL},
- {"GPIO1_OSRH", MM, GPIO1_OSRH},
- {"GPIO0_TSRL", MM, GPIO0_TSRL},
- {"GPIO0_TSRH", MM, GPIO0_TSRH},
- {"GPIO1_TSRL", MM, GPIO1_TSRL},
- {"GPIO1_TSRH", MM, GPIO1_TSRH},
- {"GPIO0_IR", MM, GPIO0_IR},
- {"GPIO1_IR", MM, GPIO1_IR},
- {"GPIO0_ISR1L", MM, GPIO0_ISR1L},
- {"GPIO0_ISR1H", MM, GPIO0_ISR1H},
- {"GPIO1_ISR1L", MM, GPIO1_ISR1L},
- {"GPIO1_ISR1H", MM, GPIO1_ISR1H},
- {"GPIO0_ISR2L", MM, GPIO0_ISR2L},
- {"GPIO0_ISR2H", MM, GPIO0_ISR2H},
- {"GPIO1_ISR2L", MM, GPIO1_ISR2L},
- {"GPIO1_ISR2H", MM, GPIO1_ISR2H},
- {"GPIO0_ISR3L", MM, GPIO0_ISR3L},
- {"GPIO0_ISR3H", MM, GPIO0_ISR3H},
- {"GPIO1_ISR3L", MM, GPIO1_ISR3L},
- {"GPIO1_ISR3H", MM, GPIO1_ISR3H},
- {"SDR0_USB2PHY0CR", IDCR6, SDR0_USB2PHY0CR},
- {"SDR0_USB2H0CR", IDCR6, SDR0_USB2H0CR},
- {"SDR0_USB2D0CR", IDCR6, SDR0_USB2D0CR},
-#endif
-};
-
-/*
- * CPU Register dump of PPC4xx HW configuration registers
- * Output: first all DCR-registers, then in order of struct ppc4xx_reg
- */
-#define PRINT_DCR(dcr) printf("0x%08x %-16s: 0x%08x\n", dcr,#dcr, mfdcr(dcr));
-
-void ppc4xx_reginfo(void)
-{
- unsigned int i;
- unsigned int n;
- u32 value;
- enum REGISTER_TYPE type;
-#if defined (CONFIG_405EP)
- printf("Dump PPC405EP HW configuration registers\n\n");
-#elif CONFIG_405GP
- printf ("Dump 405GP HW configuration registers\n\n");
-#elif CONFIG_440EPX
- printf("Dump PPC440EPx HW configuration registers\n\n");
-#endif
- printf("MSR: 0x%08x\n", mfmsr());
-
- printf ("\nUniversal Interrupt Controller Regs\n");
- PRINT_DCR(UIC0SR);
- PRINT_DCR(UIC0ER);
- PRINT_DCR(UIC0CR);
- PRINT_DCR(UIC0PR);
- PRINT_DCR(UIC0TR);
- PRINT_DCR(UIC0MSR);
- PRINT_DCR(UIC0VR);
- PRINT_DCR(UIC0VCR);
-
-#if (UIC_MAX > 1)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 2)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 3)
- PRINT_DCR(UIC3SR);
- PRINT_DCR(UIC3ER);
- PRINT_DCR(UIC3CR);
- PRINT_DCR(UIC3PR);
- PRINT_DCR(UIC3TR);
- PRINT_DCR(UIC3MSR);
- PRINT_DCR(UIC3VR);
- PRINT_DCR(UIC3VCR);
-#endif
-
-#if defined (CONFIG_405EP) || defined (CONFIG_405GP)
- printf ("\n\nDMA Channels\n");
- PRINT_DCR(DMASR);
- PRINT_DCR(DMASGC);
- PRINT_DCR(DMAADR);
-
- PRINT_DCR(DMACR0);
- PRINT_DCR(DMACT0);
- PRINT_DCR(DMADA0);
- PRINT_DCR(DMASA0);
- PRINT_DCR(DMASB0);
-
- PRINT_DCR(DMACR1);
- PRINT_DCR(DMACT1);
- PRINT_DCR(DMADA1);
- PRINT_DCR(DMASA1);
- PRINT_DCR(DMASB1);
-
- PRINT_DCR(DMACR2);
- PRINT_DCR(DMACT2);
- PRINT_DCR(DMADA2);
- PRINT_DCR(DMASA2);
- PRINT_DCR(DMASB2);
-
- PRINT_DCR(DMACR3);
- PRINT_DCR(DMACT3);
- PRINT_DCR(DMADA3);
- PRINT_DCR(DMASA3);
- PRINT_DCR(DMASB3);
-#endif
-
- printf ("\n\nVarious HW-Configuration registers\n");
-#if defined (CONFIG_440EPX)
- PRINT_DCR(MAL0_CFG);
- PRINT_DCR(CPM0_ER);
- PRINT_DCR(CPM1_ER);
- PRINT_DCR(PLB4A0_ACR);
- PRINT_DCR(PLB4A1_ACR);
- PRINT_DCR(PLB3A0_ACR);
- PRINT_DCR(OPB2PLB40_BCTRL);
- PRINT_DCR(P4P3BO0_CFG);
-#endif
- n = sizeof(ppc4xx_reg) / sizeof(ppc4xx_reg[0]);
- for (i = 0; i < n; i++) {
- value = 0;
- type = ppc4xx_reg[i].type;
- switch (type) {
- case IDCR1: /* Indirect via SDRAM0_CFGADDR/DDR0_CFGDATA */
- mtdcr(SDRAM0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDRAM0_CFGDATA);
- break;
- case IDCR2: /* Indirect via EBC0_CFGADDR/EBC0_CFGDATA */
- mtdcr(EBC0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(EBC0_CFGDATA);
- break;
- case IDCR5: /* Indirect via CPR0_CFGADDR/CPR0_CFGDATA */
- mtdcr(CPR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(CPR0_CFGDATA);
- break;
- case IDCR6: /* Indirect via SDR0_CFGADDR/SDR0_CFGDATA */
- mtdcr(SDR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDR0_CFGDATA);
- break;
- case MM: /* Directly Accessed MMIO Register */
- value = in_be32((const volatile unsigned __iomem *)
- ppc4xx_reg[i].address);
- break;
- default:
- printf("\nERROR: struct entry %d: unknown register"
- "type\n", i);
- break;
- }
- printf("0x%08x %-16s: 0x%08x\n",ppc4xx_reg[i].address,
- ppc4xx_reg[i].name, value);
- }
-}
diff --git a/cpu/ppc4xx/resetvec.S b/cpu/ppc4xx/resetvec.S
deleted file mode 100644
index b3308bd..0000000
--- a/cpu/ppc4xx/resetvec.S
+++ /dev/null
@@ -1,12 +0,0 @@
-/* Copyright MontaVista Software Incorporated, 2000 */
-#include <config.h>
- .section .resetvec,"ax"
-#if defined(CONFIG_440)
- b _start_440
-#else
-#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
- b _start_pci
-#else
- b _start
-#endif
-#endif
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
deleted file mode 100644
index 30c6e0e..0000000
--- a/cpu/ppc4xx/sdram.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * (C) Copyright 2002-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include "sdram.h"
-#include "ecc.h"
-
-#ifdef CONFIG_SDRAM_BANK0
-
-#ifndef CONFIG_440
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
- {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
- {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
- {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
- {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#ifdef CONFIG_SYS_SDRAM_CASL
-static ulong ns2clks(ulong ns)
-{
- ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
-
- return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
-}
-#endif /* CONFIG_SYS_SDRAM_CASL */
-
-static ulong compute_sdtr1(ulong speed)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
- ulong sdtr1 = 0;
-
- /* CASL */
- if (CONFIG_SYS_SDRAM_CASL < 2)
- sdtr1 |= (1 << SDRAM0_TR_CASL);
- else
- if (CONFIG_SYS_SDRAM_CASL > 4)
- sdtr1 |= (3 << SDRAM0_TR_CASL);
- else
- sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
-
- /* PTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
-
- /* CTP */
- tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
-
- /* LDF */
- tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
- else
- sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
-
- /* RFTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
- if ((tmp >= 4) && (tmp <= 10))
- sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
- else
- sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
-
- /* RCD */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
-
- return sdtr1;
-#else /* CONFIG_SYS_SDRAM_CASL */
- /*
- * If no values are configured in the board config file
- * use the default values, which seem to be ok for most
- * boards.
- *
- * REMARK:
- * For new board ports we strongly recommend to define the
- * correct values for the used SDRAM chips in your board
- * config file (see PPChameleonEVB.h)
- */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x01074015;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x0086400d;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/* refresh is expressed in ms */
-static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
-
- tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
- tmp /= 1000000;
-
- return ((tmp & 0x00003FF8) << 16);
-#else /* CONFIG_SYS_SDRAM_CASL */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x07f00000;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x05f00000;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/*
- * Autodetect onboard SDRAM on 405 platforms
- */
-phys_size_t initdram(int board_type)
-{
- ulong speed;
- ulong sdtr1;
- int i;
-
- /*
- * Determine SDRAM speed
- */
- speed = get_bus_freq(0); /* parameter not used on ppc4xx */
-
- /*
- * sdtr1 (register SDRAM0_TR) must take into account timings listed
- * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
- * account actual SDRAM size. So we can set up sdtr1 according to what
- * is specified in board configuration file while rtr dependds on SDRAM
- * size we are assuming before detection.
- */
- sdtr1 = compute_sdtr1(speed);
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG, 0x00000000);
-
- /*
- * Set MB0CF for bank 0.
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR, sdtr1);
- mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
-
- udelay(200);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram(SDRAM0_CFG, 0x80800000);
-
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG, 0x00000000);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG, 0x80800000);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
- mb0cf[i].size) {
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG, 0);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0;
-}
-
-#else /* CONFIG_440 */
-
-/*
- * Define some default values. Those can be overwritten in the
- * board config file.
- */
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
- {(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
- {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_TR0
-#define CONFIG_SYS_SDRAM0_TR0 0x41094012
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_WDDCTR
-#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_RTR
-#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_CFG0
-#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-static void sdram_tr1_set(int ram_address, int* tr1_value)
-{
- int i;
- int j, k;
- volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
- int first_good = -1, last_bad = 0x1ff;
-
- unsigned long test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- /* go through all possible SDRAM0_TR1[RDCT] values */
- for (i=0; i<=0x1ff; i++) {
- /* set the current value for TR1 */
- mtsdram(SDRAM0_TR1, (0x80800800 | i));
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* we have a SDRAM0_TR1[RDCT] that is part of the window */
- if (j == NUM_TRIES) {
- if (first_good == -1)
- first_good = i; /* found beginning of window */
- } else { /* bad read */
- /* if we have not had a good read then don't care */
- if (first_good != -1) {
- /* first failure after a good read */
- last_bad = i-1;
- break;
- }
- }
- }
-
- /* return the current value for TR1 */
- *tr1_value = (first_good + last_bad) / 2;
-}
-
-/*
- * Autodetect onboard DDR SDRAM on 440 platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-phys_size_t initdram(int board_type)
-{
- int i;
- int tr1_bank1;
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG0, 0x00000000);
-
- /*
- * Setup some default
- */
- mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
- mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
- mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
- mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
- mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
- udelay(400); /* Delay 200 usecs (min) */
-
- /*
- * Enable the controller, then wait for DCEN to complete
- */
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
- /*
- * Optimize TR1 to current hardware environment
- */
- sdram_tr1_set(0x00000000, &tr1_bank1);
- mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
-
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
- != mb0cf[i].size) {
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
-#ifdef CONFIG_SDRAM_ECC
- ecc_init(0, size);
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0; /* nothing found ! */
-}
-
-#endif /* CONFIG_440 */
-
-#endif /* CONFIG_SDRAM_BANK0 */
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
deleted file mode 100644
index bea3376..0000000
--- a/cpu/ppc4xx/sdram.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SDRAM_H_
-#define _SDRAM_H_
-
-#include <config.h>
-
-#define ONE_BILLION 1000000000
-
-struct sdram_conf_s {
- unsigned long size;
- int rows;
- unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-/* Bitfields offsets */
-#define SDRAM0_TR_CASL (31 - 8)
-#define SDRAM0_TR_PTA (31 - 13)
-#define SDRAM0_TR_CTP (31 - 15)
-#define SDRAM0_TR_LDF (31 - 17)
-#define SDRAM0_TR_RFTA (31 - 29)
-#define SDRAM0_TR_RCD (31 - 31)
-
-#ifdef CONFIG_SYS_SDRAM_CL
-/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
-#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
-#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
-#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
-#define CONFIG_SYS_SDRAM_LDF 0
-#ifdef CONFIG_SYS_SDRAM_tRFC
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
-#else
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
-#endif
-#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
-#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
-
-/*
- * Some defines for the 440 DDR controller
- */
-#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
-#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
-
-#endif
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
deleted file mode 100644
index 906face..0000000
--- a/cpu/ppc4xx/speed.c
+++ /dev/null
@@ -1,1177 +0,0 @@
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ONE_BILLION 1000000000
-#ifdef DEBUG
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
-
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- uint pvr = get_pvr();
- unsigned long psr;
- unsigned long m;
-
- /*
- * Read PLL Mode register
- */
- pllmr = mfdcr (CPC0_PLLMR);
-
- /*
- * Read Pin Strapping register
- */
- psr = mfdcr (CPC0_PSR);
-
- /*
- * Determine FWD_DIV.
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
- if (sysInfo->pllFbkDiv == 0) {
- sysInfo->pllFbkDiv = 16;
- }
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
-
- /*
- * Check if PPC405GPr used (mask minor revision field)
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- /*
- * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
- */
- sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
-
- /*
- * Determine factor m depending on PLL feedback clock source
- */
- if (!(psr & PSR_PCI_ASYNC_EN)) {
- if (psr & PSR_NEW_MODE_EN) {
- /*
- * sync pci clock used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
- } else {
- /*
- * sync pci clock used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
- }
- } else if (psr & PSR_NEW_MODE_EN) {
- if (psr & PSR_PERCLK_SYNC_MODE_EN) {
- /*
- * PerClk used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
- } else {
- /*
- * CPU clock used as feedback (new mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
- }
- } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
- /*
- * PerClk used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
- } else {
- /*
- * PLB clock used as feedback (legacy mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
- }
-
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
- sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
- } else {
- /*
- * Check pllFwdDiv to see if running in bypass mode where the CPU speed
- * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
- * to make sure it is within the proper range.
- * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
- * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
- */
- if (sysInfo->pllFwdDiv == 1) {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
- sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
- } else {
- sysInfo->freqVCOHz = ( 1000000000000LL *
- (unsigned long long)sysInfo->pllFwdDiv *
- (unsigned long long)sysInfo->pllFbkDiv *
- (unsigned long long)sysInfo->pllPlbDiv
- ) / (unsigned long long)sysClkPeriodPs;
- sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- }
- }
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqProcessor;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-
-#elif defined(CONFIG_440)
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-static u8 pll_fwdv_multi_bits[] = {
- /* values for: 1 - 16 */
- 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
- 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
-};
-
-u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
- if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-static u8 pll_fbdv_multi_bits[] = {
- /* values for: 1 - 100 */
- 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
- 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
- 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
- 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
- 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
- 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
- 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
- 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
- /* values for: 101 - 200 */
- 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
- 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
- 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
- 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
- 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
- 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
- 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
- 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
- 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
- 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
- /* values for: 201 - 255 */
- 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
- 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
- 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
- 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
- 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
- 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
-};
-
-u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
- if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-/*
- * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
- * with latest EAS
- */
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long m;
- unsigned long plbedv0;
-
- /* Extract configured divisors */
- mfsdr(SDR0_SDSTP0, strp0);
- mfsdr(SDR0_SDSTP1, strp1);
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
- sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
- sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
- sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
-
- temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
- temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
-
- temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
- plbedv0 = temp ? temp: 8;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) {
- /* PLL internal feedback */
- m = sysInfo->pllFbkDiv;
- } else {
- /* PLL PerClk feedback */
- m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
- sysInfo->pllExtBusDiv;
- }
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- return;
-}
-
-#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void get_sys_info (sys_info_t *sysInfo)
-{
- unsigned long temp;
- unsigned long reg;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
- /*
- WARNING: ASSUMES the following:
- ENG=1
- PRADV0=1
- PRBDV0=1
- */
-
- /* Decode CPR0_PLLD0 for divisors */
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- sysInfo->pllFwdDivA = temp ? temp : 16;
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- lfdiv = reg & PLLD_LFBDV_MASK;
-
- mfcpr(CPR0_OPBD0, reg);
- temp = (reg & OPBDDV_MASK) >> 24;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- mfcpr(CPR0_PERD, reg);
- temp = (reg & PERDV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 8;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & SPCID_MASK) >> 24;
- sysInfo->pllPciDiv = temp ? temp : 4;
-
- /* Calculate 'M' based on feedback source */
- mfsdr(SDR0_SDSTP0, reg);
- temp = (reg & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- mfcpr(CPR0_PLLC, reg);
- temp = (reg & PLLC_SRC_MASK) >> 29;
- if (!temp) /* PLLOUTA */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else /* PLLOUTB */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
- sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- /* Figure which timer source to use */
- if (mfspr(SPRN_CCR1) & 0x0080) {
- /* External Clock, assume same as SYS_CLK */
- temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
- if (CONFIG_SYS_CLK_FREQ > temp)
- sysInfo->freqTmrClk = temp;
- else
- sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
- }
- else /* Internal clock */
- sysInfo->freqTmrClk = sysInfo->freqProcessor;
-}
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- sys_info_t sys_info;
- get_sys_info (&sys_info);
- return sys_info.freqPCI;
-}
-
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
- && !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long temp;
- unsigned long m;
-
- /* Extract configured divisors */
- strp0 = mfdcr( CPC0_STRP0 );
- sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
- sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
- sysInfo->pllFbkDiv = temp ? temp : 16;
- sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
- sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
-
- /* Calculate 'M' based on feedback source */
- if( strp0 & PLLSYS0_EXTSL_MASK )
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-#else
-
-#if !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long temp1;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
-
-#if defined(CONFIG_YUCCA)
- unsigned long sys_freq;
- unsigned long sys_per=0;
- unsigned long msr;
- unsigned long pci_clock_per;
- unsigned long sdr_ddrpll;
-
- /*-------------------------------------------------------------------------+
- | Get the system clock period.
- +-------------------------------------------------------------------------*/
- sys_per = determine_sysper();
-
- msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
-
- /*-------------------------------------------------------------------------+
- | Calculate the system clock speed from the period.
- +-------------------------------------------------------------------------*/
- sys_freq = (ONE_BILLION / sys_per) * 1000;
-#endif
-
- /* Extract configured divisors */
- mfsdr( SDR0_SDSTP0,strp0 );
- mfsdr( SDR0_SDSTP1,strp1 );
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
- sysInfo->pllFwdDivA = temp ? temp : 16 ;
- temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
- sysInfo->pllOpbDiv = temp ? temp : 4;
- temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
- prbdv0 = (strp0 >> 2) & 0x7;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
- lfdiv = temp1 ? temp1 : 64;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
- if (!temp)
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
-#if defined(CONFIG_YUCCA)
- sysInfo->freqVCOMhz = (m * sys_freq) ;
-#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-#endif
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
-#if defined(CONFIG_YUCCA)
- /* Determine PCI Clock Period */
- pci_clock_per = determine_pci_clock_per();
- sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-#endif
-
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-#endif /* CONFIG_XILINX_440 */
-
-#if defined(CONFIG_YUCCA)
-unsigned long determine_sysper(void)
-{
- unsigned int fpga_clocking_reg;
- unsigned int master_clock_selection;
- unsigned long master_clock_per = 0;
- unsigned long fb_div_selection;
- unsigned int vco_div_reg_value;
- unsigned long vco_div_selection;
- unsigned long sys_per = 0;
- int extClkVal;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 0 and reg 1 to get FPGA reg information
- +-------------------------------------------------------------------------*/
- fpga_clocking_reg = in16(FPGA_REG16);
-
-
- /* Determine Master Clock Source Selection */
- master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
-
- switch(master_clock_selection) {
- case FPGA_REG16_MASTER_CLK_66_66:
- master_clock_per = PERIOD_66_66MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_50:
- master_clock_per = PERIOD_50_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_33_33:
- master_clock_per = PERIOD_33_33MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_25:
- master_clock_per = PERIOD_25_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_EXT:
- if ((extClkVal==EXTCLK_33_33)
- && (extClkVal==EXTCLK_50)
- && (extClkVal==EXTCLK_66_66)
- && (extClkVal==EXTCLK_83)) {
- /* calculate master clock period from external clock value */
- master_clock_per=(ONE_BILLION/extClkVal) * 1000;
- } else {
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- break;
- default:
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- break;
- }
-
- /* Determine FB divisors values */
- if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_6;
- else
- fb_div_selection = FPGA_FB_DIV_12;
- } else {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_10;
- else
- fb_div_selection = FPGA_FB_DIV_20;
- }
-
- /* Determine VCO divisors values */
- vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
-
- switch(vco_div_reg_value) {
- case FPGA_REG16_VCO_DIV_4:
- vco_div_selection = FPGA_VCO_DIV_4;
- break;
- case FPGA_REG16_VCO_DIV_6:
- vco_div_selection = FPGA_VCO_DIV_6;
- break;
- case FPGA_REG16_VCO_DIV_8:
- vco_div_selection = FPGA_VCO_DIV_8;
- break;
- case FPGA_REG16_VCO_DIV_10:
- default:
- vco_div_selection = FPGA_VCO_DIV_10;
- break;
- }
-
- if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
- switch(master_clock_per) {
- case PERIOD_25_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_33_33MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_50_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_50_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_75_00MHZ;
- }
- break;
- case PERIOD_66_66MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_66_66MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_100_00MHZ;
- }
- break;
- default:
- break;
- }
-
- if (sys_per == 0) {
- /* Other combinations are not supported */
- DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- } else {
- /* calcul system clock without cheking */
- /* if engineering option clock no check is selected */
- /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
- sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
- }
-
- return(sys_per);
-}
-
-/*-------------------------------------------------------------------------+
-| determine_pci_clock_per.
-+-------------------------------------------------------------------------*/
-unsigned long determine_pci_clock_per(void)
-{
- unsigned long pci_clock_selection, pci_period;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 6 to get PCI 0 FPGA reg information
- +-------------------------------------------------------------------------*/
- pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
-
-
- pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
-
- switch (pci_clock_selection) {
- case FPGA_REG16_PCI0_CLK_133_33:
- pci_period = PERIOD_133_33MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_100:
- pci_period = PERIOD_100_00MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_66_66:
- pci_period = PERIOD_66_66MHZ;
- break;
- default:
- pci_period = PERIOD_33_33MHZ;;
- break;
- }
-
- return(pci_period);
-}
-#endif
-
-#elif defined(CONFIG_XILINX_405)
-extern void get_sys_info (sys_info_t * sysInfo);
-extern ulong get_PCI_freq (void);
-
-#elif defined(CONFIG_AP1000)
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqProcessor = 240 * 1000 * 1000;
- sysInfo->freqPLB = 80 * 1000 * 1000;
- sysInfo->freqPCI = 33 * 1000 * 1000;
-}
-
-#elif defined(CONFIG_405)
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqVCOMhz=3125000;
- sysInfo->freqProcessor=12*1000*1000;
- sysInfo->freqPLB=50*1000*1000;
- sysInfo->freqPCI=66*1000*1000;
-}
-
-#elif defined(CONFIG_405EP)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr0;
- unsigned long pllmr1;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m;
- unsigned long pllmr0_ccdv;
-
- /*
- * Read PLL Mode registers
- */
- pllmr0 = mfdcr (CPC0_PLLMR0);
- pllmr1 = mfdcr (CPC0_PLLMR1);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B (should be equal to A)
- */
- sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 16;
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
-
- /*
- * Determine the M factor
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
- if (pllmr1 & PLLMR1_SSCS_MASK) {
- /*
- * This is true if FWDVA == FWDVB:
- * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- * / pllmr0_ccdv;
- */
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
- / sysInfo->pllFwdDiv / pllmr0_ccdv;
- } else {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
- }
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-
- sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-#elif defined(CONFIG_405EZ)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long cpr_plld;
- unsigned long cpr_pllc;
- unsigned long cpr_primad;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
- unsigned long primad_cpudv;
- unsigned long m;
- unsigned long plloutb;
-
- /*
- * Read PLL Mode registers
- */
- mfcpr(CPR0_PLLD, cpr_plld);
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B
- */
- sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0)
- sysInfo->pllFwdDivB = 8;
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 256;
-
- /*
- * Read CPR_PRIMAD register
- */
- mfcpr(CPC0_PRIMAD, cpr_primad);
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0)
- sysInfo->pllPlbDiv = 16;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0)
- sysInfo->pllExtBusDiv = 16;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0)
- sysInfo->pllOpbDiv = 16;
-
- /*
- * Determine the M factor
- */
- if (cpr_pllc & PLLC_SRC_MASK)
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0)
- primad_cpudv = 16;
-
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / primad_cpudv;
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
-
- sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllOpbDiv;
-
- sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllExtBusDiv;
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
- sysInfo->pllFwdDivB);
- sysInfo->freqUART = plloutb;
-}
-
-#elif defined(CONFIG_405EX)
-
-/*
- * TODO: We need to get the CPR registers and calculate these values correctly!!!!
- * We need the specs!!!!
- */
-static unsigned char get_fbdv(unsigned char index)
-{
- unsigned char ret = 0;
- /* This is table should be 256 bytes.
- * Only take first 52 values.
- */
- unsigned char fbdv_tb[] = {
- 0x00, 0xff, 0x7f, 0xfd,
- 0x7a, 0xf5, 0x6a, 0xd5,
- 0x2a, 0xd4, 0x29, 0xd3,
- 0x26, 0xcc, 0x19, 0xb3,
- 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba,
- 0x74, 0xe9, 0x52, 0xa5,
- 0x4b, 0x96, 0x2c, 0xd8,
- 0x31, 0xe3, 0x46, 0x8d,
- 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed,
- 0x5a, 0xb5, 0x6b, 0xd6,
- 0x2d, 0xdb, 0x36, 0xec,
-
- };
-
- if ((index & 0x7f) == 0)
- return 1;
- while (ret < sizeof (fbdv_tb)) {
- if (fbdv_tb[ret] == index)
- break;
- ret++;
- }
- ret++;
-
- return ret;
-}
-
-#define PLL_FBK_PLL_LOCAL 0
-#define PLL_FBK_CPU 1
-#define PLL_FBK_PERCLK 5
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m = 1;
- unsigned int tmp;
- unsigned char fwdva[16] = {
- 1, 2, 14, 9, 4, 11, 16, 13,
- 12, 5, 6, 15, 10, 7, 8, 3,
- };
- unsigned char sel, cpudv0, plb2xDiv;
-
- mfcpr(CPR0_PLLD, tmp);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
-
- /*
- * Determine PLBDV0
- */
- sysInfo->pllPlbDiv = 2;
-
- /*
- * Determine PERDV0
- */
- mfcpr(CPR0_PERD, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
-
- /*
- * Determine OPBDV0
- */
- mfcpr(CPR0_OPBD0, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
-
- /* Determine PLB2XDV0 */
- mfcpr(CPR0_PLBD, tmp);
- tmp = (tmp >> 16) & 0x07;
- plb2xDiv = (tmp == 0) ? 8 : tmp;
-
- /* Determine CPUDV0 */
- mfcpr(CPR0_CPUD, tmp);
- tmp = (tmp >> 24) & 0x07;
- cpudv0 = (tmp == 0) ? 8 : tmp;
-
- /* Determine SEL(5:7) in CPR0_PLLC */
- mfcpr(CPR0_PLLC, tmp);
- sel = (tmp >> 24) & 0x07;
-
- /*
- * Determine the M factor
- * PLL local: M = FBDV
- * CPU clock: M = FBDV * FWDVA * CPUDV0
- * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
- *
- */
- switch (sel) {
- case PLL_FBK_CPU:
- m = sysInfo->pllFwdDiv * cpudv0;
- break;
- case PLL_FBK_PERCLK:
- m = sysInfo->pllFwdDiv * plb2xDiv * 2
- * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
- break;
- case PLL_FBK_PLL_LOCAL:
- break;
- default:
- printf("%s unknown m\n", __FUNCTION__);
- return;
-
- }
- m *= sysInfo->pllFbkDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
-
- /*
- * Determine PLB clock frequency, ddr1x should be the same
- */
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-
-int get_clocks (void)
-{
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqPLB;
-
-#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
-
-#ifdef CONFIG_IOP480
- gd->cpu_clk = 66000000;
- gd->bus_clk = 66000000;
-#endif
- return (0);
-}
-
-
-/********************************************
- * get_bus_freq
- * return PLB bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- ulong val;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB;
-
-#elif defined(CONFIG_IOP480)
-
- val = 66;
-
-#else
-# error get_bus_freq() not implemented
-#endif
-
- return val;
-}
-
-#if !defined(CONFIG_IOP480)
-ulong get_OPB_freq (void)
-{
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
-
- return sys_info.freqOPB;
-}
-#endif
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
deleted file mode 100644
index 927c88c..0000000
--- a/cpu/ppc4xx/start.S
+++ /dev/null
@@ -1,2170 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*------------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------
- */
-
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <ppc4xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx-isram.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
-# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
-# define PBxAP PB1AP
-# define PBxCR PB0CR
-# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
-# define PBxAP PB1AP
-# define PBxCR PB1CR
-# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
-# define PBxAP PB2AP
-# define PBxCR PB2CR
-# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
-# define PBxAP PB3AP
-# define PBxCR PB3CR
-# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
-# define PBxAP PB4AP
-# define PBxCR PB4CR
-# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
-# define PBxAP PB5AP
-# define PBxCR PB5CR
-# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
-# define PBxAP PB6AP
-# define PBxCR PB6CR
-# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
-# define PBxAP PB7AP
-# define PBxCR PB7CR
-# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
-# endif
-# endif
-# ifndef PBxAP_VAL
-# define PBxAP_VAL 0
-# endif
-# ifndef PBxCR_VAL
-# define PBxCR_VAL 0
-# endif
-/*
- * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
- * used as temporary stack pointer for the primordial stack
- */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
-# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(7) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(0) | \
- EBC_BXAP_WBN_ENCODE(0) | \
- EBC_BXAP_WBF_ENCODE(0) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
-# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
- EBC_BXCR_BS_64MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
-# ifndef CONFIG_SYS_INIT_RAM_PATTERN
-# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
-# endif
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
-#endif
-
-/*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
- */
-#if !defined(CONFIG_SYS_FLASH_BASE)
-/* If not already defined, set it to the "last" 128MByte region */
-# define CONFIG_SYS_FLASH_BASE 0xf8000000
-#endif
-#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
-# define CONFIG_SYS_ICACHE_SACR_VALUE \
- (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
-#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
-
-#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
-# define CONFIG_SYS_DCACHE_SACR_VALUE \
- (0x00000000)
-#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
-
-#define function_prolog(func_name) .text; \
- .align 2; \
- .globl func_name; \
- func_name:
-#define function_epilog(func_name) .type func_name,@function; \
- .size func_name,.-func_name
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-
- .extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
- .extern reconfig_tlb0
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-#if !defined(CONFIG_NAND_SPL)
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-#endif /* CONFIG_NAND_SPL */
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*
- * NAND U-Boot image is started from offset 0
- */
- .text
-#if defined(CONFIG_440)
- bl reconfig_tlb0
-#endif
- GET_GOT
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
- /*
- * 4xx RAM-booting U-Boot image is started from offset 0
- */
- .text
- bl _start_440
-#endif
-
-/*
- * 440 Startup -- on reset only the top 4k of the effective
- * address space is mapped in by an entry in the instruction
- * and data shadow TLB. The .bootpg section is located in the
- * top 4k & does only what's necessary to map in the the rest
- * of the boot rom. Once the boot rom is mapped in we can
- * proceed with normal startup.
- *
- * NOTE: CS0 only covers the top 2MB of the effective address
- * space after reset.
- */
-
-#if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
- .section .bootpg,"ax"
-#endif
- .globl _start_440
-
-/**************************************************************************/
-_start_440:
- /*--------------------------------------------------------------------+
- | 440EPX BUP Change - Hardware team request
- +--------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- sync
- nop
- nop
-#endif
- /*----------------------------------------------------------------+
- | Core bug fix. Clear the esr
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_ESR,r0
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- iccci r0,r0 /* NOTE: operands not used for 440 */
- dccci r0,r0 /* NOTE: operands not used for 440 */
- sync
- li r0,0
- mtspr SPRN_SRR0,r0
- mtspr SPRN_SRR1,r0
- mtspr SPRN_CSRR0,r0
- mtspr SPRN_CSRR1,r0
- /* NOTE: 440GX adds machine check status regs */
-#if defined(CONFIG_440) && !defined(CONFIG_440GP)
- mtspr SPRN_MCSRR0,r0
- mtspr SPRN_MCSRR1,r0
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#endif
-
- /*----------------------------------------------------------------*/
- /* CCR0 init */
- /*----------------------------------------------------------------*/
- /* Disable store gathering & broadcast, guarantee inst/data
- * cache block touch, force load/store alignment
- * (see errata 1.12: 440_33)
- */
- lis r1,0x0030 /* store gathering & broadcast disable */
- ori r1,r1,0x6000 /* cache touch */
- mtspr SPRN_CCR0,r1
-
- /*----------------------------------------------------------------*/
- /* Initialize debug */
- /*----------------------------------------------------------------*/
- mfspr r1,SPRN_DBCR0
- andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
- bne skip_debug_init /* if set, don't clear debug register */
- mtspr SPRN_DBCR0,r0
- mtspr SPRN_DBCR1,r0
- mtspr SPRN_DBCR2,r0
- mtspr SPRN_IAC1,r0
- mtspr SPRN_IAC2,r0
- mtspr SPRN_IAC3,r0
- mtspr SPRN_DAC1,r0
- mtspr SPRN_DAC2,r0
- mtspr SPRN_DVC1,r0
- mtspr SPRN_DVC2,r0
-
- mfspr r1,SPRN_DBSR
- mtspr SPRN_DBSR,r1 /* Clear all valid bits */
-skip_debug_init:
-
-#if defined (CONFIG_440SPE)
- /*----------------------------------------------------------------+
- | Initialize Core Configuration Reg1.
- | a. ICDPEI: Record even parity. Normal operation.
- | b. ICTPEI: Record even parity. Normal operation.
- | c. DCTPEI: Record even parity. Normal operation.
- | d. DCDPEI: Record even parity. Normal operation.
- | e. DCUPEI: Record even parity. Normal operation.
- | f. DCMPEI: Record even parity. Normal operation.
- | g. FCOM: Normal operation
- | h. MMUPEI: Record even parity. Normal operation.
- | i. FFF: Flush only as much data as necessary.
- | j. TCS: Timebase increments from CPU clock.
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_CCR1, r0
-
- /*----------------------------------------------------------------+
- | Reset the timebase.
- | The previous write to CCR1 sets the timebase source.
- +-----------------------------------------------------------------*/
- mtspr SPRN_TBWL, r0
- mtspr SPRN_TBWU, r0
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup interrupt vectors */
- /*----------------------------------------------------------------*/
- mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
- li r1,0x0100
- mtspr SPRN_IVOR0,r1 /* Critical input */
- li r1,0x0200
- mtspr SPRN_IVOR1,r1 /* Machine check */
- li r1,0x0300
- mtspr SPRN_IVOR2,r1 /* Data storage */
- li r1,0x0400
- mtspr SPRN_IVOR3,r1 /* Instruction storage */
- li r1,0x0500
- mtspr SPRN_IVOR4,r1 /* External interrupt */
- li r1,0x0600
- mtspr SPRN_IVOR5,r1 /* Alignment */
- li r1,0x0700
- mtspr SPRN_IVOR6,r1 /* Program check */
- li r1,0x0800
- mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
- li r1,0x0c00
- mtspr SPRN_IVOR8,r1 /* System call */
- li r1,0x0a00
- mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
- li r1,0x0900
- mtspr SPRN_IVOR10,r1 /* Decrementer */
- li r1,0x1300
- mtspr SPRN_IVOR13,r1 /* Data TLB error */
- li r1,0x1400
- mtspr SPRN_IVOR14,r1 /* Instr TLB error */
- li r1,0x2000
- mtspr SPRN_IVOR15,r1 /* Debug */
-
- /*----------------------------------------------------------------*/
- /* Configure cache regions */
- /*----------------------------------------------------------------*/
- mtspr SPRN_INV0,r0
- mtspr SPRN_INV1,r0
- mtspr SPRN_INV2,r0
- mtspr SPRN_INV3,r0
- mtspr SPRN_DNV0,r0
- mtspr SPRN_DNV1,r0
- mtspr SPRN_DNV2,r0
- mtspr SPRN_DNV3,r0
- mtspr SPRN_ITV0,r0
- mtspr SPRN_ITV1,r0
- mtspr SPRN_ITV2,r0
- mtspr SPRN_ITV3,r0
- mtspr SPRN_DTV0,r0
- mtspr SPRN_DTV1,r0
- mtspr SPRN_DTV2,r0
- mtspr SPRN_DTV3,r0
-
- /*----------------------------------------------------------------*/
- /* Cache victim limits */
- /*----------------------------------------------------------------*/
- /* floors 0, ceiling max to use the entire cache -- nothing locked
- */
- lis r1,0x0001
- ori r1,r1,0xf800
- mtspr SPRN_IVLIM,r1
- mtspr SPRN_DVLIM,r1
-
- /*----------------------------------------------------------------+
- |Initialize MMUCR[STID] = 0.
- +-----------------------------------------------------------------*/
- mfspr r0,SPRN_MMUCR
- addis r1,0,0xFFFF
- ori r1,r1,0xFF00
- and r0,r0,r1
- mtspr SPRN_MMUCR,r0
-
- /*----------------------------------------------------------------*/
- /* Clear all TLB entries -- TID = 0, TS = 0 */
- /*----------------------------------------------------------------*/
- addis r0,0,0x0000
-#ifdef CONFIG_SYS_RAMBOOT
- li r4,0 /* Start with TLB #0 */
-#else
- li r4,1 /* Start with TLB #1 */
-#endif
- li r1,64 /* 64 TLB entries */
- sub r1,r1,r4 /* calculate last TLB # */
- mtctr r1
-rsttlb:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
- rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
- beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
-#endif
- tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
- tlbwe r0,r4,1
- tlbwe r0,r4,2
-tlbnxt: addi r4,r4,1 /* Next TLB */
- bdnz rsttlb
-
- /*----------------------------------------------------------------*/
- /* TLB entry setup -- step thru tlbtab */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
- /*----------------------------------------------------------------*/
- /* We have different TLB tables for revA and rev B of 440SPe */
- /*----------------------------------------------------------------*/
- mfspr r1, PVR
- lis r0,0x5342
- ori r0,r0,0x1891
- cmpw r7,r1,r0
- bne r7,..revA
- bl tlbtabB
- b ..goon
-..revA:
- bl tlbtabA
-..goon:
-#else
- bl tlbtab /* Get tlbtab pointer */
-#endif
- mr r5,r0
- li r1,0x003f /* 64 TLB entries max */
- mtctr r1
- li r4,0 /* TLB # */
-
- addi r5,r5,-4
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 */
- rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
- bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
-#endif
- lwzu r0,4(r5)
- cmpwi r0,0
- beq 2f /* 0 marks end */
- lwzu r1,4(r5)
- lwzu r2,4(r5)
- tlbwe r0,r4,0 /* TLB Word 0 */
- tlbwe r1,r4,1 /* TLB Word 1 */
- tlbwe r2,r4,2 /* TLB Word 2 */
-tlbnx2: addi r4,r4,1 /* Next TLB */
- bdnz 1b
-
- /*----------------------------------------------------------------*/
- /* Continue from 'normal' start */
- /*----------------------------------------------------------------*/
-2:
- bl 3f
- b _start
-
-3: li r0,0
- mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
- mflr r1
- mtspr SPRN_SRR0,r1
- rfi
-#endif /* CONFIG_440 */
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-#ifndef CONFIG_NAND_SPL
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
-
-#ifdef CONFIG_440
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#else
- CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#endif /* CONFIG_440 */
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
- STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
- STD_EXCEPTION(0xa00, APU, UnknownException)
-#endif
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
-#else
- STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-#endif
- CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
- . = _START_OFFSET
-#endif
- .globl _start
-_start:
-
-/*****************************************************************************/
-#if defined(CONFIG_440)
-
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- li r0,0x0000
- lis r1,0xffff
- mtspr SPRN_DEC,r0 /* prevent dec exceptions */
- mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
- mtspr SPRN_TBWU,r0
- mtspr SPRN_TSR,r1 /* clear all timer exception status */
- mtspr SPRN_TCR,r0 /* disable all */
- mtspr SPRN_ESR,r0 /* clear exception syndrome register */
- mtxer r0 /* clear integer exception register */
-
- /*----------------------------------------------------------------*/
- /* Debug setup -- some (not very good) ice's need an event*/
- /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
- /* value you need in this case 0x8cff 0000 should do the trick */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr SPRN_DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr SPRN_DBCR0,r0
- isync
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup the internal SRAM */
- /*----------------------------------------------------------------*/
- li r0,0
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /* Clear Dcache to use as RAM */
- addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
- ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ran
- addi r5,r5,0x0001
-..d_ran:
- mtctr r5
-..d_ag:
- dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag
-
- /*
- * Lock the init-ram/stack in d-cache, so that other regions
- * may use d-cache as well
- * Note, that this current implementation locks exactly 4k
- * of d-cache, so please make sure that you don't define a
- * bigger init-ram area. Take a look at the lwmon5 440EPx
- * implementation as a reference.
- */
- msync
- isync
- /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
- lis r1,0x0201
- ori r1,r1,0xf808
- mtspr SPRN_DVLIM,r1
- lis r1,0x0808
- ori r1,r1,0x0808
- mtspr SPRN_DNV0,r1
- mtspr SPRN_DNV1,r1
- mtspr SPRN_DNV2,r1
- mtspr SPRN_DNV3,r1
- mtspr SPRN_DTV0,r1
- mtspr SPRN_DTV1,r1
- mtspr SPRN_DTV2,r1
- mtspr SPRN_DTV3,r1
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
- /* 440EP & 440GR are only 440er PPC's without internal SRAM */
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
- /* not all PPC's have internal SRAM usable as L2-cache */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460SX)
- mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1, 0x0000
- ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
- mtdcr L2_CACHE_CFG,r1
-#endif
-
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM0_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM0_DPC,r1
- mfdcr r1,ISRAM0_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM0_PMEG,r1
-
- lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
- ori r1,r1,0x0980 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x8001
- ori r1,r1,0x0980 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x8002
- ori r1,r1, 0x0980 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x8003
- ori r1,r1, 0x0980 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1,0x0000 /* BAS = X_0000_0000 */
- ori r1,r1,0x0984 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0984 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0984 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0984 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM1_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM1_DPC,r1
- mfdcr r1,ISRAM1_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM1_PMEG,r1
-
- lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
- mtdcr ISRAM1_SB0CR,r1
-#endif
-#elif defined(CONFIG_460SX)
- lis r1,0x0000 /* BAS = 0000_0000 */
- ori r1,r1,0x0B84 /* first 128k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0B84 /* second 128k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0B84 /* third 128k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0B84 /* fourth 128k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440GP)
- ori r1,r1,0x0380 /* 8k rw */
- mtdcr ISRAM0_SB0CR,r1
- mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
-#endif
-#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
-
- /*----------------------------------------------------------------*/
- /* Setup the stack in internal SRAM */
- /*----------------------------------------------------------------*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0, RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#endif /* CONFIG_440 */
-
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405)
- /*----------------------------------------------------------------------- */
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------------- */
- addi r4,r0,0x0000
-#if !defined(CONFIG_405EX)
- mtspr SPRN_SGR,r4
-#else
- /*
- * On 405EX, completely clearing the SGR leads to PPC hangup
- * upon PCIe configuration access. The PCIe memory regions
- * need to be guarded!
- */
- lis r3,0x0000
- ori r3,r3,0x7FFC
- mtspr SPRN_SGR,r3
-#endif
- mtspr SPRN_DCWR,r4
- mtesr r4 /* clear Exception Syndrome Reg */
- mttcr r4 /* clear Timer Control Reg */
- mtxer r4 /* clear Fixed-Point Exception Reg */
- mtevpr r4 /* clear Exception Vector Prefix Reg */
- addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
- /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
-
- /* Invalidate the i- and d-caches. */
- bl invalidate_icache
- bl invalidate_dcache
-
- /* Set-up icache cacheability. */
- lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r4
- isync
-
- /* Set-up dcache cacheability. */
- lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r4
-
-#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
- && !defined (CONFIG_XILINX_405)
- /*----------------------------------------------------------------------- */
- /* Tune the speed and size for flash CS0 */
- /*----------------------------------------------------------------------- */
- bl ext_bus_cntlr_init
-#endif
-
-#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
- /*
- * For boards that don't have OCM and can't use the data cache
- * for their primordial stack, setup stack here directly after the
- * SDRAM is initialized in ext_bus_cntlr_init.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
-
-#if defined(CONFIG_405EP)
- /*----------------------------------------------------------------------- */
- /* DMA Status, clear to come up clean */
- /*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
- ori r3,r3, 0xFFFF
- mtdcr DMASR, r3
-
- bl ppc405ep_init /* do ppc405ep specific init */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
-#if defined(CONFIG_405EZ)
- /********************************************************************
- * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
- *******************************************************************/
- /*
- * We can map the OCM on the PLB3, so map it at
- * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
- */
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_DSRC1, r3 /* Set Data Side */
- mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_DSRC2, r3 /* Set Data Side */
- mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
- addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
- mtdcr OCM0_DISDPC,r3
-
- isync
-#else /* CONFIG_405EZ */
- /********************************************************************
- * Setup OCM - On Chip Memory
- *******************************************************************/
- /* Setup OCM */
- lis r0, 0x7FFF
- ori r0, r0, 0xFFFF
- mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
- mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
- and r3, r3, r0 /* disable data-side IRAM */
- and r4, r4, r0 /* disable data-side IRAM */
- mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
- mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- mtdcr OCM0_DSARC, r3
- addis r4, 0, 0xC000 /* OCM data area enabled */
- mtdcr OCM0_DSCNTL, r4
- isync
-#endif /* CONFIG_405EZ */
-#endif
-
- /*----------------------------------------------------------------------- */
- /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
- /*----------------------------------------------------------------------- */
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
- li r4, PBxAP
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
- mtdcr EBC0_CFGDATA, r4
-
- addi r4, 0, PBxCR
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
- mtdcr EBC0_CFGDATA, r4
-
- /*
- * Enable the data cache for the 128MB storage access control region
- * at CONFIG_SYS_INIT_RAM_ADDR.
- */
- mfdccr r4
- oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- mtdccr r4
-
- /*
- * Preallocate data cache lines to be used to avoid a subsequent
- * cache miss and an ensuing machine check exception when exceptions
- * are enabled.
- */
- li r0, 0
-
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
-
- /*
- * Convert the size, in bytes, to the number of cache lines/blocks
- * to preallocate.
- */
- clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
- srwi r5, r4, L1_CACHE_SHIFT
- beq ..load_counter
- addi r5, r5, 0x0001
-..load_counter:
- mtctr r5
-
- /* Preallocate the computed number of cache blocks. */
-..alloc_dcache_block:
- dcba r0, r3
- addi r3, r3, L1_CACHE_BYTES
- bdnz ..alloc_dcache_block
- sync
-
- /*
- * Load the initial stack pointer and data area and convert the size,
- * in bytes, to the number of words to initialize to a known value.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
-
- lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
- ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
- mtctr r4
-
- lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
-
- lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
-
-..stackloop:
- stwu r4, -4(r2)
- bdnz ..stackloop
-
- /*
- * Make room for stack frame header and clear final stack frame so
- * that stack backtraces terminate cleanly.
- */
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-
-#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
- (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
- /*
- * Stack in OCM.
- */
-
- /* Set up Stack at top of OCM */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
-
- /* Set up a zeroized stack frame so that backtrace works right */
- li r0, 0
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT /* initialize GOT access */
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- /* NEVER RETURNS! */
- bl board_init_f /* run first part of init code (from Flash) */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
- /*----------------------------------------------------------------------- */
-
-
-#ifndef CONFIG_NAND_SPL
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-#ifdef CONFIG_440
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-#endif /* CONFIG_440 */
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = Relocated stack pointer
- * r4 = Relocated global data pointer
- * r5 = Relocated text pointer
- */
- .globl relocate_code
-relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
- */
-
- /* Save registers */
- mr r9, r3
- mr r10, r4
- mr r11, r5
-
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
- bl flush_dcache_range
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * Undo the earlier data cache set-up for the primordial stack and
- * data area. First, invalidate the data cache and then disable data
- * cacheability for that area. Finally, restore the EBC values, if
- * any.
- */
-
- /* Invalidate the primordial stack and data area in cache */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
- add r4, r4, r3
-
- bl invalidate_dcache_range
-
- /* Disable cacheability for the region */
- mfdccr r3
- lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- and r3, r3, r4
- mtdccr r3
-
- /* Restore the EBC parameters */
- li r3, PBxAP
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxAP_VAL@h
- ori r3, r3, PBxAP_VAL@l
- mtdcr EBC0_CFGDATA, r3
-
- li r3, PBxCR
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxCR_VAL@h
- ori r3, r3, PBxCR_VAL@l
- mtdcr EBC0_CFGDATA, r3
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
- /* Restore registers */
- mr r3, r9
- mr r4, r10
- mr r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /*
- * Unlock the previously locked d-cache
- */
- msync
- isync
- /* set TFLOOR/NFLOOR to 0 again */
- lis r6,0x0001
- ori r6,r6,0xf800
- mtspr SPRN_DVLIM,r6
- lis r6,0x0000
- ori r6,r6,0x0000
- mtspr SPRN_DNV0,r6
- mtspr SPRN_DNV1,r6
- mtspr SPRN_DNV2,r6
- mtspr SPRN_DNV3,r6
- mtspr SPRN_DTV0,r6
- mtspr SPRN_DTV1,r6
- mtspr SPRN_DTV2,r6
- mtspr SPRN_DTV3,r6
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
- * to speed up the boot process. Now this cache needs to be disabled.
- */
- iccci 0,0 /* Invalidate inst cache */
- dccci 0,0 /* Invalidate data cache, now no longer our stack */
- sync
- isync
-
- /* Clear all potential pending exceptions */
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
- addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
-#else
- addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
- tlbre r0,r1,0x0002 /* Read contents */
- ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
- tlbwe r0,r1,0x0002 /* Save it out */
- sync
- isync
-#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Init Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, L1_CACHE_BYTES /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 7f
-
- li r0, 0
-
- andi. r5, r4, 3
- beq 6f
- sub r4, r4, r5
- mtctr r5
- mr r5, r4
-5: stb r0, 0(r5)
- addi r5, r5, 1
- bdnz 5b
-6:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 6b
-
-7:
- mr r3, r9 /* Init Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start_of_vectors)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + _START_OFFSET
- li r8, Alignment - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
-
-#ifdef CONFIG_440
- li r7, .L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_APU - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBError - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBError - _start + _START_OFFSET
- bl trap_reloc
-#else /* CONFIG_440 */
- li r7, .L_PIT - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-#endif /* CONFIG_440 */
-
- li r7, .L_DebugBreakpoint - _start + _START_OFFSET
- bl trap_reloc
-
-#if !defined(CONFIG_440)
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtmsr r7 /* change MSR */
-#else
- bl __440_msr_set
- b __440_msr_continue
-
-__440_msr_set:
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtspr SPRN_SRR1,r7
- mflr r7
- mtspr SPRN_SRR0,r7
- rfi
-__440_msr_continue:
-#endif
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| dcbz_area.
-+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
-#endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/**************************************************************************/
-/* PPC405EP specific stuff */
-/**************************************************************************/
-#ifdef CONFIG_405EP
-ppc405ep_init:
-
-#ifdef CONFIG_BUBINGA
- /*
- * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
- * function) to support FPGA and NVRAM accesses below.
- */
-
- lis r3,GPIO0_OSRH@h /* config GPIO output select */
- ori r3,r3,GPIO0_OSRH@l
- lis r4,CONFIG_SYS_GPIO0_OSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_OSRL@h
- ori r3,r3,GPIO0_OSRL@l
- lis r4,CONFIG_SYS_GPIO0_OSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_ISR1H@h /* config GPIO input select */
- ori r3,r3,GPIO0_ISR1H@l
- lis r4,CONFIG_SYS_GPIO0_ISR1H@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
- stw r4,0(r3)
- lis r3,GPIO0_ISR1L@h
- ori r3,r3,GPIO0_ISR1L@l
- lis r4,CONFIG_SYS_GPIO0_ISR1L@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
- ori r3,r3,GPIO0_TSRH@l
- lis r4,CONFIG_SYS_GPIO0_TSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_TSRL@h
- ori r3,r3,GPIO0_TSRL@l
- lis r4,CONFIG_SYS_GPIO0_TSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
- ori r3,r3,GPIO0_TCR@l
- lis r4,CONFIG_SYS_GPIO0_TCR@h
- ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
- stw r4,0(r3)
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB4AP /* program EBC bank 4 for FPGA access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB4CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
- mtdcr EBC0_CFGDATA,r3
-#endif
-
- /*
- !-----------------------------------------------------------------------
- ! Check to see if chip is in bypass mode.
- ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
- ! CPU reset Otherwise, skip this step and keep going.
- ! Note: Running BIOS in bypass mode is not supported since PLB speed
- ! will not be fast enough for the SDRAM (min 66MHz)
- !-----------------------------------------------------------------------
- */
- mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r4,0x1
-
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
-
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Read NVRAM to get value to write in PLLMR.
- ! If value has not been correctly saved, write default value
- ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
- ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
- !
- ! WARNING: This code assumes the first three words in the nvram_t
- ! structure in openbios.h. Changing the beginning of
- ! the structure will break this code.
- !
- !-----------------------------------------------------------------------
- */
- addis r3,0,NVRAM_BASE@h
- addi r3,r3,NVRAM_BASE@l
-
- lwz r4, 0(r3)
- addis r5,0,NVRVFY1@h
- addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
- bne ..no_pllset
- addi r3,r3,4
- lwz r4, 0(r3)
- addis r5,0,NVRVFY2@h
- addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
- bne ..no_pllset
- addi r3,r3,8 /* Skip over conf_size */
- lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
- lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
- rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r5,1 /* See if PLL is locked */
- beq pll_write
-..no_pllset:
-#endif /* CONFIG_BUBINGA */
-
-#ifdef CONFIG_TAIHU
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- addis r5,0,CPLD_REG0_ADDR@h
- ori r5,r5,CPLD_REG0_ADDR@l
- andi. r5, r5, 0x10
- bne _pci_66mhz
-#endif /* CONFIG_TAIHU */
-
-#if defined(CONFIG_ZEUS)
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- lis r3,0x0000
- addi r3,r3,0x3030
- lis r4,0x8042
- addi r4,r4,0x223e
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
- b 1f
-#endif
-
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
-
-#ifdef CONFIG_TAIHU
- b 1f
-_pci_66mhz:
- addis r3,0,PLLMR0_DEFAULT_PCI66@h
- ori r3,r3,PLLMR0_DEFAULT_PCI66@l
- addis r4,0,PLLMR1_DEFAULT_PCI66@h
- ori r4,r4,PLLMR1_DEFAULT_PCI66@l
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
-#endif /* CONFIG_TAIHU */
-
-1:
- b pll_write /* Write the CPC0_PLLMR with new value */
-
-pll_done:
- /*
- !-----------------------------------------------------------------------
- ! Clear Soft Reset Register
- ! This is needed to enable PCI if not booting from serial EPROM
- !-----------------------------------------------------------------------
- */
- addi r3, 0, 0x0
- mtdcr CPC0_SRR, r3
-
- addis r3,0,0x0010
- mtctr r3
-pci_wait:
- bdnz pci_wait
-
- blr /* return to main code */
-
-/*
-!-----------------------------------------------------------------------------
-! Function: pll_write
-! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
-! That is:
-! 1. Pll is first disabled (de-activated by putting in bypass mode)
-! 2. PLL is reset
-! 3. Clock dividers are set while PLL is held in reset and bypassed
-! 4. PLL Reset is cleared
-! 5. Wait 100us for PLL to lock
-! 6. A core reset is performed
-! Input: r3 = Value to write to CPC0_PLLMR0
-! Input: r4 = Value to write to CPC0_PLLMR1
-! Output r3 = none
-!-----------------------------------------------------------------------------
-*/
- .globl pll_write
-pll_write:
- mfdcr r5, CPC0_UCR
- andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
-
- mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
- mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- /*
- ! Wait min of 100us for PLL to lock.
- ! See CMOS 27E databook for more info.
- ! At 200MHz, that means waiting 20,000 instructions
- */
- addi r3,0,20000 /* 2000 = 0x4e20 */
- mtctr r3
-pll_wait:
- bdnz pll_wait
-
- oris r5,r5,0x8000 /* Enable PLL */
- mtdcr CPC0_PLLMR1,r5 /* Engage */
-
- /*
- * Reset CPU to guarantee timings are OK
- * Not sure if this is needed...
- */
- addis r3,0,0x1000
- mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| mttlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb3)
- TLBWE(4,3,2)
- blr
- function_epilog(mttlb3)
-
-/*----------------------------------------------------------------------------+
-| mftlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb3)
- TLBRE(3,3,2)
- blr
- function_epilog(mftlb3)
-
-/*----------------------------------------------------------------------------+
-| mttlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb2)
- TLBWE(4,3,1)
- blr
- function_epilog(mttlb2)
-
-/*----------------------------------------------------------------------------+
-| mftlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb2)
- TLBRE(3,3,1)
- blr
- function_epilog(mftlb2)
-
-/*----------------------------------------------------------------------------+
-| mttlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb1)
- TLBWE(4,3,0)
- blr
- function_epilog(mttlb1)
-
-/*----------------------------------------------------------------------------+
-| mftlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb1)
- TLBRE(3,3,0)
- blr
- function_epilog(mftlb1)
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
- mr r6,r3
- mr r7,r4
- mflr r8
-
- /*
- * Copy SPL from icache into SDRAM
- */
- subi r3,r3,4
- subi r4,r4,4
- srwi r5,r5,2
- mtctr r5
-..spl_loop:
- lwzu r0,4(r4)
- stwu r0,4(r3)
- bdnz ..spl_loop
-
- /*
- * Calculate "corrected" link register, so that we "continue"
- * in execution in destination range
- */
- sub r3,r7,r6 /* r3 = src - dst */
- sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
- mtlr r8
- blr
-
-nand_boot_common:
- /*
- * First initialize SDRAM. It has to be available *before* calling
- * nand_boot().
- */
- lis r3,CONFIG_SYS_SDRAM_BASE@h
- ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
- bl initdram
-
- /*
- * Now copy the 4k SPL code into SDRAM and continue execution
- * from there.
- */
- lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
- ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
- lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
- lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
- bl nand_boot_relocate
-
- /*
- * We're running from SDRAM now!!!
- *
- * It is necessary for 4xx systems to relocate from running at
- * the original location (0xfffffxxx) to somewhere else (SDRAM
- * preferably). This is because CS0 needs to be reconfigured for
- * NAND access. And we can't reconfigure this CS when currently
- * "running" from it.
- */
-
- /*
- * Finally call nand_boot() to load main NAND U-Boot image from
- * NAND and jump to it.
- */
- bl nand_boot /* will not return */
-#endif /* CONFIG_NAND_SPL */
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
deleted file mode 100644
index 24a9a9c..0000000
--- a/cpu/ppc4xx/tlb.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_440)
-
-#include <ppc440.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-
-typedef struct region {
- u64 base;
- u32 size;
- u32 tlb_word2_i_value;
-} region_t;
-
-void remove_tlb(u32 vaddr, u32 size)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
- /*
- * Found a TLB in the range.
- * Disable it by writing 0 to tlb0 word.
- */
- mttlb1(i, 0);
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-/*
- * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
- * This function is used to either turn cache on or off in a specific
- * memory area.
- */
-void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_word2_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
- ((tlb_vaddr < (vaddr + size - 1)) &&
- ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
- /*
- * Found a TLB in the range.
- * Change cache attribute in tlb2 word.
- */
- tlb_word2_value =
- TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /*
- * Now either flush or invalidate the dcache
- */
- if (tlb_word2_i_value)
- flush_dcache();
- else
- invalidate_dcache();
-
- mttlb3(i, tlb_word2_value);
- asm("iccci 0,0");
- }
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-static int add_tlb_entry(u64 phys_addr,
- u32 virt_addr,
- u32 tlb_word0_size_value,
- u32 tlb_word2_i_value)
-{
- int i;
- unsigned long tlb_word0_value;
- unsigned long tlb_word1_value;
- unsigned long tlb_word2_value;
-
- /* First, find the index of a TLB entry not being used */
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
- break;
- }
- if (i >= PPC4XX_TLB_SIZE)
- return -1;
-
- /* Second, create the TLB entry */
- tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
- TLB_WORD0_TS_0 | tlb_word0_size_value;
- tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
- TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
- tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /* Wait for all memory accesses to complete */
- sync();
-
- /* Third, add the TLB entries */
- mttlb1(i, tlb_word0_value);
- mttlb2(i, tlb_word1_value);
- mttlb3(i, tlb_word2_value);
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-
- return 0;
-}
-
-static void program_tlb_addr(u64 phys_addr,
- u32 virt_addr,
- u32 mem_size,
- u32 tlb_word2_i_value)
-{
- int rc;
- int tlb_i;
-
- tlb_i = tlb_word2_i_value;
- while (mem_size != 0) {
- rc = 0;
- /* Add the TLB entries in to map the region. */
- if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256MB_SIZE)) {
- /* Add a 256MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
- mem_size -= TLB_256MB_SIZE;
- phys_addr += TLB_256MB_SIZE;
- virt_addr += TLB_256MB_SIZE;
- }
- } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16MB_SIZE)) {
- /* Add a 16MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
- mem_size -= TLB_16MB_SIZE;
- phys_addr += TLB_16MB_SIZE;
- virt_addr += TLB_16MB_SIZE;
- }
- } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1MB_SIZE)) {
- /* Add a 1MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
- mem_size -= TLB_1MB_SIZE;
- phys_addr += TLB_1MB_SIZE;
- virt_addr += TLB_1MB_SIZE;
- }
- } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256KB_SIZE)) {
- /* Add a 256KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
- mem_size -= TLB_256KB_SIZE;
- phys_addr += TLB_256KB_SIZE;
- virt_addr += TLB_256KB_SIZE;
- }
- } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_64KB_SIZE)) {
- /* Add a 64KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
- mem_size -= TLB_64KB_SIZE;
- phys_addr += TLB_64KB_SIZE;
- virt_addr += TLB_64KB_SIZE;
- }
- } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16KB_SIZE)) {
- /* Add a 16KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
- mem_size -= TLB_16KB_SIZE;
- phys_addr += TLB_16KB_SIZE;
- virt_addr += TLB_16KB_SIZE;
- }
- } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_4KB_SIZE)) {
- /* Add a 4KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
- mem_size -= TLB_4KB_SIZE;
- phys_addr += TLB_4KB_SIZE;
- virt_addr += TLB_4KB_SIZE;
- }
- } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1KB_SIZE)) {
- /* Add a 1KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
- mem_size -= TLB_1KB_SIZE;
- phys_addr += TLB_1KB_SIZE;
- virt_addr += TLB_1KB_SIZE;
- }
- } else {
- printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
- phys_addr);
- }
-
- if (rc != 0)
- printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
- phys_addr);
- }
-
- return;
-}
-
-/*
- * Program one (or multiple) TLB entries for one memory region
- *
- * Common usage for boards with SDRAM DIMM modules to dynamically
- * configure the TLB's for the SDRAM
- */
-void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
-{
- region_t region_array;
-
- region_array.base = phys_addr;
- region_array.size = size;
- region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
-
- /* Call the routine to add in the tlb entries for the memory regions */
- program_tlb_addr(region_array.base, virt_addr, region_array.size,
- region_array.tlb_word2_i_value);
-
- return;
-}
-
-#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
deleted file mode 100644
index 42e4221..0000000
--- a/cpu/ppc4xx/traps.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
- */
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-static __inline__ void set_tsr(unsigned long val)
-{
-#if defined(CONFIG_440)
- asm volatile("mtspr 0x150, %0" : : "r" (val));
-#else
- asm volatile("mttsr %0" : : "r" (val));
-#endif
-}
-
-static __inline__ unsigned long get_esr(void)
-{
- unsigned long val;
-
-#if defined(CONFIG_440)
- asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
-#else
- asm volatile("mfesr %0" : "=r" (val) :);
-#endif
- return val;
-}
-
-#define ESR_MCI 0x80000000
-#define ESR_PIL 0x08000000
-#define ESR_PPR 0x04000000
-#define ESR_PTR 0x02000000
-#define ESR_DST 0x00800000
-#define ESR_DIZ 0x00400000
-#define ESR_U0F 0x00008000
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception");
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup, val;
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- u32 value2;
- int corr_ecc = 0;
- int uncorr_ecc = 0;
-#endif
-
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- val = mfspr(MCSR);
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine Check Exception.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
-
- val = get_esr();
-
-#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
- if (val& ESR_IMCP) {
- printf("Instruction");
- mtspr(ESR, val & ~ESR_IMCP);
- } else {
- printf("Data");
- }
- printf(" machine check.\n");
-
-#elif defined(CONFIG_440) || defined(CONFIG_405EX)
- if (val& ESR_IMCP){
- printf("Instruction Synchronous Machine Check exception\n");
- mtspr(SPRN_ESR, val & ~ESR_IMCP);
- } else {
- val = mfspr(MCSR);
- if (val & MCSR_IB)
- printf("Instruction Read PLB Error\n");
-#if defined(CONFIG_440)
- if (val & MCSR_DRB)
- printf("Data Read PLB Error\n");
- if (val & MCSR_DWB)
- printf("Data Write PLB Error\n");
-#else
- if (val & MCSR_DB)
- printf("Data PLB Error\n");
-#endif
- if (val & MCSR_TLBP)
- printf("TLB Parity Error\n");
- if (val & MCSR_ICP){
- /*flush_instruction_cache(); */
- printf("I-Cache Parity Error\n");
- }
- if (val & MCSR_DCSP)
- printf("D-Cache Search Parity Error\n");
- if (val & MCSR_DCFP)
- printf("D-Cache Flush Parity Error\n");
- if (val & MCSR_IMPE)
- printf("Machine Check exception is imprecise\n");
-
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- }
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- mfsdram(DDR0_00, val) ;
- printf("DDR0: DDR0_00 %lx\n", val);
- val = (val >> 16) & 0xff;
- if (val & 0x80)
- printf("DDR0: At least one interrupt active\n");
- if (val & 0x40)
- printf("DDR0: DRAM initialization complete.\n");
- if (val & 0x20) {
- printf("DDR0: Multiple uncorrectable ECC events.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x10) {
- printf("DDR0: Single uncorrectable ECC event.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x08) {
- printf("DDR0: Multiple correctable ECC events.\n");
- corr_ecc = 1;
- }
- if (val & 0x04) {
- printf("DDR0: Single correctable ECC event.\n");
- corr_ecc = 1;
- }
- if (val & 0x02)
- printf("Multiple accesses outside the defined"
- " physical memory space detected\n");
- if (val & 0x01)
- printf("DDR0: Single access outside the defined"
- " physical memory space detected.\n");
-
- mfsdram(DDR0_01, val);
- val = (val >> 8) & 0x7;
- switch (val ) {
- case 0:
- printf("DDR0: Write Out-of-Range command\n");
- break;
- case 1:
- printf("DDR0: Read Out-of-Range command\n");
- break;
- case 2:
- printf("DDR0: Masked write Out-of-Range command\n");
- break;
- case 4:
- printf("DDR0: Wrap write Out-of-Range command\n");
- break;
- case 5:
- printf("DDR0: Wrap read Out-of-Range command\n");
- break;
- default:
- mfsdram(DDR0_01, value2);
- printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
- }
- mfsdram(DDR0_23, val);
- if (((val >> 16) & 0xff) && corr_ecc)
- printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
- (val >> 16) & 0xff);
- mfsdram(DDR0_23, val);
- if (((val >> 8) & 0xff) && uncorr_ecc)
- printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
- (val >> 8) & 0xff);
- mfsdram(DDR0_33, val);
- if (val)
- printf("DDR0: Address of command that caused an "
- "Out-of-Range interrupt %lx\n", val);
- mfsdram(DDR0_34, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_35, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_36, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_37, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_38, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_39, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_40, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_41, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
-#endif /* CONFIG_440EPX */
-#endif /* CONFIG_440 */
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- long esr_val;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
-
- esr_val = get_esr();
- if( esr_val & ESR_PIL )
- printf( "** Illegal Instruction **\n" );
- else if( esr_val & ESR_PPR )
- printf( "** Privileged Instruction **\n" );
- else if( esr_val & ESR_PTR )
- printf( "** Trap Instruction **\n" );
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-DecrementerPITException(struct pt_regs *regs)
-{
- /*
- * Reset PIT interrupt
- */
- set_tsr(0x08000000);
-
- /*
- * Call timer_interrupt routine in interrupts.c
- */
- timer_interrupt(NULL);
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/ppc4xx/u-boot.lds b/cpu/ppc4xx/u-boot.lds
deleted file mode 100644
index 2b47934..0000000
--- a/cpu/ppc4xx/u-boot.lds
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "config.h" /* CONFIG_BOARDDIR */
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
-#ifdef CONFIG_440
- .bootpg RESET_VECTOR_ADDRESS - 0xffc :
- {
- cpu/ppc4xx/start.o (.bootpg)
-
- /*
- * PPC440 board need a board specific object with the
- * TLB definitions. This needs to get included right after
- * start.o, since the first shadow TLB only covers 4k
- * of address space.
- */
- CONFIG_BOARDDIR/init.o (.bootpg)
- } :text = 0xffff
-#endif
-
- .resetvec RESET_VECTOR_ADDRESS :
- {
- *(.resetvec)
- } :text = 0xffff
-
- . = RESET_VECTOR_ADDRESS + 0x4;
-
- /*
- * Make sure that the bss segment isn't linked at 0x0, otherwise its
- * address won't be updated during relocation fixups. Note that
- * this is a temporary fix. Code to dynamically the fixup the bss
- * location will be added in the future. When the bss relocation
- * fixup code is present this workaround should be removed.
- */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
- . |= 0x10;
-#endif
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c
deleted file mode 100644
index 8b1b259..0000000
--- a/cpu/ppc4xx/uic.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-#if (UIC_MAX > 3)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
- UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
-#elif (UIC_MAX > 2)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
-#elif (UIC_MAX > 1)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
-#else
-#define UICB0_ALL 0
-#endif
-
-u32 get_dcr(u16);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
-#if (UIC_MAX > 1)
- /* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
-#endif
-}
-
-/* Handler for UIC interrupt */
-static void uic_interrupt(u32 uic_base, int vec_base)
-{
- u32 uic_msr;
- u32 msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = get_dcr(uic_base + UIC_MSR);
- msr_shift = uic_msr;
- vec = vec_base;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000)
- interrupt_run_handler(vec);
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- u32 uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(UIC0MSR);
-
-#if (UIC_MAX > 1)
- if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
- uic_interrupt(UIC1_DCR_BASE, 32);
-#endif
-
-#if (UIC_MAX > 2)
- if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
- uic_interrupt(UIC2_DCR_BASE, 64);
-#endif
-
-#if (UIC_MAX > 3)
- if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
- uic_interrupt(UIC3_DCR_BASE, 96);
-#endif
-
- mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
-
- if (uic_msr & ~(UICB0_ALL))
- uic_interrupt(UIC0_DCR_BASE, 0);
-
- return;
-}
-
-void pic_irq_ack(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0SR, UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1SR, UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2SR, UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3SR, UIC_MASK(vec));
-}
-
-/*
- * Install and free a interrupt handler.
- */
-void pic_irq_enable(unsigned int vec)
-{
-
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
-
- debug("Install interrupt vector %d\n", vec);
-}
-
-void pic_irq_disable(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
-}
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
deleted file mode 100644
index 592efe7..0000000
--- a/cpu/ppc4xx/usb.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2007
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-
-#ifdef CONFIG_4xx_DCACHE
-#include <asm/mmu.h>
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#include "usbdev.h"
-
-int usb_cpu_init(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- usb_dev_init();
-#endif
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
deleted file mode 100644
index a9edacd..0000000
--- a/cpu/ppc4xx/usb_ohci.c
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
- *
- * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#include "usbdev.h"
-
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
-#define ohci_cpu_to_le16(x) (x)
-#define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- urb_priv_t * purb = &urb_priv;
-
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (&regs->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (&regs->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (&regs->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (&regs->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv;
- int i, size = 0;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* if we have an unfinished URB from previous transaction let's
- * fail and scream as quickly as possible so as not to corrupt
- * further communication */
- if (!urb_finished) {
- err("sohci_submit_job: URB NOT FINISHED");
- return -1;
- }
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb_finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- }
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv = &urb_priv;
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return ohci_cpu_to_le16 (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->state = ED_OPER;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = ohci_cpu_to_le32 (info);
- td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
- if (data)
- td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
-
- tdINFO = ohci_cpu_to_le32 (td->hwINFO);
- tdBE = ohci_cpu_to_le32 (td->hwBE);
- tdCBP = ohci_cpu_to_le32 (td->hwCBP);
-
-
- if (!(usb_pipecontrol(lurb_priv->pipe) &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
- (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
- }
-#ifdef CONFIG_MPC5200
- td_list->hwNextTD = 0;
-#endif
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- lurb_priv = &urb_priv;
- tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
-
- ed = td_list->ed;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
- if ((ed->state & (ED_OPER | ED_UNLINK))
- && (lurb_priv->state != URB_DEL)) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- urb_finished = 1;
- }
- }
-
- if (ed->state != ED_NEW) {
- edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
- edTailP = ohci_cpu_to_le32 (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#endif
- if (usb_pipeint(pipe)) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipebulk(pipe))
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb_finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- stat = USB_ST_CRC_ERR;
- urb_finished = 1;
- break;
- }
- }
-#if 0
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-#endif
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#endif
-
- /* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
- ohci->slot_name,
- readl (&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
-
- ints = OHCI_INTR_WDH;
-
- } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
-
- } else if ((ints &= readl (&regs->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- writel (OHCI_INTR_WDH, &regs->intrdisable);
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, &regs->intrenable);
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, &regs->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, &regs->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, &regs->intrenable);
- stat = 0xff;
- }
-
- writel (ints, &regs->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
- memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
-#if defined(CONFIG_440EP)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
-#endif
-
- gohci.flags = 0;
- gohci.slot_name = "ppc440";
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- return -1;
- }
-
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#endif
- ohci_inited = 1;
- urb_finished = 1;
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- /* init the device driver */
- usb_dev_init();
-#endif
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
- return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/ppc4xx/usb_ohci.h b/cpu/ppc4xx/usb_ohci.h
deleted file mode 100644
index 2c3dc4f..0000000
--- a/cpu/ppc4xx/usb_ohci.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- __u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u16 hwPSW[MAXPSW];
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
- } roothub;
-} __attribute__((aligned(32)));
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status */
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct {
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- int state;
- unsigned long pipe;
- int actual_length;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma; */
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD + 1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *td_alloc(struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++) {
- if (ptd[i].usb_dev == NULL) {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void ed_free(struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
deleted file mode 100644
index fe398af..0000000
--- a/cpu/ppc4xx/usbdev.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*USB 1.1,2.0 device*/
-
-#include <common.h>
-#include <asm/processor.h>
-
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
-
-#include <usb.h>
-#include <asm/ppc4xx-uic.h>
-#include "usbdev.h"
-
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-
-int set_value = -1;
-
-void process_endpoints(unsigned short usb2d0_intrin)
-{
- /*will hold the packet received */
- struct usb_device_descriptor usb_device_packet;
- struct usb_configuration_descriptor usb_config_packet;
- struct usb_string_descriptor usb_string_packet;
- struct devrequest setup_packet;
- unsigned int *setup_packet_pt;
- unsigned char *packet_pt = NULL;
- int temp, temp1;
-
- int i;
-
- /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
-
- /*set usb address, seems to not work unless it is done in the next
- interrupt, so that is why it is done this way */
- if (set_value != -1)
- *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
-
- /*endpoint 1 */
- if (usb2d0_intrin & 0x01) {
- setup_packet_pt = (unsigned int *)&setup_packet;
-
- /*copy packet */
- setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
- setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
- temp = *(unsigned int *)USB2D0_FIFO_0;
- temp1 = *(unsigned int *)USB2D0_FIFO_0;
-
- /*do some swapping */
- setup_packet.value = swap_16(setup_packet.value);
- setup_packet.index = swap_16(setup_packet.index);
- setup_packet.length = swap_16(setup_packet.length);
-
- /*clear rx packet */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
-
- /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
- setup_packet.request, setup_packet.value,
- setup_packet.index, setup_packet.length, temp, temp1 ); */
-
- switch (setup_packet.request) {
- case USB_REQ_GET_DESCRIPTOR:
-
- switch (setup_packet.value >> 8) {
- case USB_DT_DEVICE:
- /*create packet */
- usb_device_packet.bLength = 18;
- usb_device_packet.bDescriptorType =
- USB_DT_DEVICE;
-#ifdef USB_2_0_DEVICE
- usb_device_packet.bcdUSB = swap_16(0x200);
-#else
- usb_device_packet.bcdUSB = swap_16(0x110);
-#endif
- usb_device_packet.bDeviceClass = 0xff;
- usb_device_packet.bDeviceSubClass = 0;
- usb_device_packet.bDeviceProtocol = 0;
- usb_device_packet.bMaxPacketSize0 = 32;
- usb_device_packet.idVendor = swap_16(1);
- usb_device_packet.idProduct = swap_16(2);
- usb_device_packet.bcdDevice = swap_16(0x300);
- usb_device_packet.iManufacturer = 1;
- usb_device_packet.iProduct = 1;
- usb_device_packet.iSerialNumber = 1;
- usb_device_packet.bNumConfigurations = 1;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_device_packet;
- break;
-
- case USB_DT_CONFIG:
- /*create packet */
- usb_config_packet.bLength = 9;
- usb_config_packet.bDescriptorType =
- USB_DT_CONFIG;
- usb_config_packet.wTotalLength = swap_16(25);
- usb_config_packet.bNumInterfaces = 1;
- usb_config_packet.bConfigurationValue = 1;
- usb_config_packet.iConfiguration = 0;
- usb_config_packet.bmAttributes = 0x40;
- usb_config_packet.bMaxPower = 0;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_config_packet;
- break;
-
- case USB_DT_STRING:
- /*create packet */
- usb_string_packet.bLength = 2;
- usb_string_packet.bDescriptorType =
- USB_DT_STRING;
- usb_string_packet.wData[0] = 0x0094;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_string_packet;
- break;
- }
-
- /*put packet in fifo */
- for (i = 0; i < (setup_packet.length); i++) {
- *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
- }
-
- /*give tx command */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
-
- break;
-
- case USB_REQ_SET_ADDRESS:
-
- /*copy usb address */
- set_value = setup_packet.value;
-
- break;
- }
-
- }
-}
-
-void process_other(unsigned char usb2d0_intrusb)
-{
-
- /*check for sof */
- if (usb2d0_intrusb & 0x08) {
- /*printf("{USB device} - sof detected\n"); */
- }
-
- /*check for reset */
- if (usb2d0_intrusb & 0x04) {
- /*printf("{USB device} - reset detected\n"); */
-
- /*copy usb address of zero, need to do this when usb reset */
- set_value = 0;
- }
-
- if (usb2d0_intrusb & 0x02) {
- /*printf("{USB device} - resume detected\n"); */
- }
-
- if (usb2d0_intrusb & 0x01) {
- /*printf("{USB device} - suspend detected\n"); */
- }
-}
-
-int usbInt(void)
-{
- /*Must read these 2 registers and use values to clear interrupts. If you
- do not read them then the interrupt will not be cleared. If you do not
- use the variable the optimizer will not do a read. */
- volatile unsigned short usb2d0_intrin =
- *(unsigned short *)USB2D0_INTRIN_16;
- volatile unsigned char usb2d0_intrusb =
- *(unsigned char *)USB2D0_INTRUSB_8;
-
- /*check if there was an endpoint interrupt */
- if (usb2d0_intrin != 0) {
- process_endpoints(usb2d0_intrin);
- }
-
- /*check for other interrupts */
- if (usb2d0_intrusb != 0) {
- process_other(usb2d0_intrusb);
- }
-
- return 0;
-}
-
-#if defined(CONFIG_440EPX)
-void usb_dev_init()
-{
- printf("USB 2.0 Device init\n");
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#else
-void usb_dev_init()
-{
-#ifdef USB_2_0_DEVICE
- printf("USB 2.0 Device init\n");
- /*select 2.0 device */
- mtsdr(SDR0_USB0, 0x0); /* 2.0 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-#else
- printf("USB 1.1 Device init\n");
- /*select 1.1 device */
- mtsdr(SDR0_USB0, 0x2); /* 1.1 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
-#endif
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#endif
-
-#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
deleted file mode 100644
index ef6a2da..0000000
--- a/cpu/ppc4xx/usbdev.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <config.h>
-
-/*Common Registers*/
-#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
-#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
-#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
-#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
-#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
-#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
-#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
-#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
-#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
-#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
-#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
-
-/*Indexed Registers*/
-#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
-#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
-#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
-#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
-#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
-
-/*FIFOs*/
-#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
-#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
-#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
-#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
-
-void usb_dev_init(void);
diff --git a/cpu/ppc4xx/xilinx_irq.c b/cpu/ppc4xx/xilinx_irq.c
deleted file mode 100644
index 7108777..0000000
--- a/cpu/ppc4xx/xilinx_irq.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <asm/io.h>
-#include <asm/xilinx_irq.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
- debug("Xilinx PIC at 0x%8x\n", intc);
-
- /*
- * Disable all external interrupts until they are
- * explicitly requested.
- */
- out_be32((u32 *) IER, 0);
-
- /* Acknowledge any pending interrupts just in case. */
- out_be32((u32 *) IAR, 0xffffffff);
-
- /* Turn on the Master Enable. */
- out_be32((u32 *) MER, 0x3UL);
-
- return;
-}
-
-int xilinx_pic_irq_get(void)
-{
- u32 irq;
- irq = in_be32((u32 *) IVR);
-
- /* If no interrupt is pending then all bits of the IVR are set to 1. As
- * the IVR is as many bits wide as numbers of inputs are available.
- * Therefore, if all bits of the IVR are set to one, its content will
- * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
- */
- if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
- irq = -1; /* report no pending interrupt. */
-
- debug("get_irq: %d\n", irq);
- return (irq);
-}
-
-void pic_irq_enable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("enable: %d\n", irq);
- out_be32((u32 *) SIE, mask);
-}
-
-void pic_irq_disable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("disable: %d\n", irq);
- out_be32((u32 *) CIE, mask);
-}
-
-void pic_irq_ack(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("ack: %d\n", irq);
- out_be32((u32 *) IAR, mask);
-}
-
-void external_interrupt(struct pt_regs *regs)
-{
- int irq;
-
- irq = xilinx_pic_irq_get();
- if (irq < 0)
- return;
-
- interrupt_run_handler(irq);
-
- return;
-}