summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/4xx_enet.c72
-rw-r--r--cpu/ppc4xx/cpu_init.c102
-rw-r--r--cpu/ppc4xx/denali_spd_ddr2.c27
-rw-r--r--cpu/ppc4xx/interrupts.c7
4 files changed, 181 insertions, 27 deletions
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d990250..007cb4f 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -274,7 +274,7 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p)
static void ppc_4xx_eth_halt (struct eth_device *dev)
{
EMAC_4XX_HW_PST hw_p = dev->priv;
- uint32_t failsafe = 10000;
+ u32 val = 10000;
out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
@@ -290,8 +290,8 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
/* wait for reset */
while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
udelay (1000); /* Delay 1 MS so as not to hammer the register */
- failsafe--;
- if (failsafe == 0)
+ val--;
+ if (val == 0)
break;
}
@@ -308,6 +308,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
hw_p->print_speed = 1; /* print speed message again next time */
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ /* don't bypass the TAHOE0/TAHOE1 cores for Linux */
+ mfsdr(SDR0_ETH_CFG, val);
+ val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
+ mtsdr(SDR0_ETH_CFG, val);
+#endif
+
return;
}
@@ -494,11 +501,18 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
u32 zmiifer; /* ZMII0_FER reg. */
u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */
u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */
+ int mode;
zmiifer = 0;
rmiifer = 0;
rmiifer1 = 0;
+#if defined(CONFIG_460EX)
+ mode = 9;
+#else
+ mode = 10;
+#endif
+
/* TODO:
* NOTE: 460GT has 2 RGMII bridge cores:
* emac0 ------ RGMII0_BASE
@@ -520,7 +534,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
* Right now only 2*RGMII is supported. Please extend when needed.
* sr - 2008-02-19
*/
- switch (9) {
+ switch (mode) {
case 1:
/* 1 MII - 460EX */
/* GMC0 EMAC4_0, ZMII Bridge */
@@ -703,6 +717,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#ifdef CONFIG_4xx_DCACHE
static u32 last_used_ea = 0;
#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX)
+ int rgmii_channel;
+#endif
EMAC_4XX_HW_PST hw_p = dev->priv;
@@ -836,10 +855,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
reg = CONFIG_PHY1_ADDR;
break;
#endif
-#if defined (CONFIG_440GX)
+#if defined (CONFIG_PHY2_ADDR)
case 2:
reg = CONFIG_PHY2_ADDR;
break;
+#endif
+#if defined (CONFIG_PHY3_ADDR)
case 3:
reg = CONFIG_PHY3_ADDR;
break;
@@ -1006,12 +1027,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
+ if (devnum >= 2)
+ rgmii_channel = devnum - 2;
+ else
+ rgmii_channel = devnum;
+
if (speed == 1000)
- reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
+ reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel));
else if (speed == 100)
- reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
+ reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel));
else if (speed == 10)
- reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
+ reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel));
else {
printf("Error in RGMII Speed\n");
return -1;
@@ -1131,7 +1157,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- mtdcr (malrxctp8r, hw_p->rx);
+ mtdcr (malrxctp8r, hw_p->rx_phys);
/* set RX buffer size */
mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16);
#else
@@ -1160,6 +1186,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
break;
#endif /* CONFIG_440GX */
+#if defined (CONFIG_460GT)
+ case 2:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (maltxctp2r, hw_p->tx_phys);
+ mtdcr (malrxctp16r, hw_p->rx_phys);
+ /* set RX buffer size */
+ mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+ case 3:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (maltxctp3r, hw_p->tx_phys);
+ mtdcr (malrxctp24r, hw_p->rx_phys);
+ /* set RX buffer size */
+ mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+#endif /* CONFIG_460GT */
case 0:
default:
/* setup MAL tx & rx channel pointers */
@@ -1866,14 +1912,22 @@ int ppc_4xx_eth_initialize (bd_t * bis)
case 2:
memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
bis->bi_enet2addr, 6);
+#if defined(CONFIG_460GT)
+ hw_addr[eth_num] = 0x300;
+#else
hw_addr[eth_num] = 0x400;
+#endif
break;
#endif
#ifdef CONFIG_HAS_ETH3
case 3:
memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
bis->bi_enet3addr, 6);
+#if defined(CONFIG_460GT)
+ hw_addr[eth_num] = 0x400;
+#else
hw_addr[eth_num] = 0x600;
+#endif
break;
#endif
}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 5d15e2f..42eabfe 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -99,10 +99,107 @@ DECLARE_GLOBAL_DATA_PTR;
# endif
#endif /* CFG_INIT_DCACHE_CS */
+#ifndef CFG_PLL_RECONFIG
+#define CFG_PLL_RECONFIG 0
+#endif
+
+void reconfigure_pll(u32 new_cpu_freq)
+{
+#if defined(CONFIG_440EPX)
+ int reset_needed = 0;
+ u32 reg, temp;
+ u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
+ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
+ fbdv, target_fbdv, lfbdv, target_lfbdv,
+ perdv0, target_perdv0, /* CLK_PERD */
+ spcid0, target_spcid0; /* CLK_SPCID */
+
+ /* Reconfigure clocks if necessary.
+ * See PPC440EPx User's Manual, sections 8.2 and 14 */
+ if (new_cpu_freq == 667) {
+ target_prbdv0 = 2;
+ target_fwdva = 2;
+ target_fwdvb = 4;
+ target_fbdv = 20;
+ target_lfbdv = 1;
+ target_perdv0 = 4;
+ target_spcid0 = 4;
+
+ mfcpr(clk_primbd, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+ if (prbdv0 != target_prbdv0) {
+ reg &= ~PRBDV_MASK;
+ reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
+ mtcpr(clk_primbd, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(clk_plld, reg);
+
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdva = temp ? temp : 16;
+
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdvb = temp ? temp : 8;
+
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+
+ if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
+ ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
+ ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
+ (target_lfbdv == 64 ? 0 : target_lfbdv);
+ mtcpr(clk_plld, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(clk_perd, reg);
+ perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
+ if (perdv0 != target_perdv0) {
+ reg &= ~CPR0_PERD_PERDV0_MASK;
+ reg |= (target_perdv0 << 24);
+ mtcpr(clk_perd, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(clk_spcid, reg);
+ temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
+ spcid0 = temp ? temp : 4;
+ if (spcid0 != target_spcid0) {
+ reg &= ~CPR0_SPCID_SPCIDV0_MASK;
+ reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
+ mtcpr(clk_spcid, reg);
+ reset_needed = 1;
+ }
+
+ /* Set reload inhibit so configuration will persist across
+ * processor resets */
+ mfcpr(clk_icfg, reg);
+ reg &= ~CPR0_ICFG_RLI_MASK;
+ reg |= 1 << 31;
+ mtcpr(clk_icfg, reg);
+ }
+
+ /* Reset processor if configuration changed */
+ if (reset_needed) {
+ __asm__ __volatile__ ("sync; isync");
+ mtspr(dbcr0, 0x20000000);
+ }
+#endif
+}
+
/*
* Breath some life into the CPU...
*
- * Set up the memory map,
+ * Reconfigure PLL if necessary,
+ * set up the memory map,
* initialize a bunch of registers
*/
void
@@ -111,6 +208,7 @@ cpu_init_f (void)
#if defined(CONFIG_WATCHDOG)
unsigned long val;
#endif
+ reconfigure_pll(CFG_PLL_RECONFIG);
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
/*
@@ -135,6 +233,7 @@ cpu_init_f (void)
#if defined (CFG_GPIO0_TCR)
out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
#endif
+#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */
#if defined (CONFIG_405EP)
/*
@@ -147,7 +246,6 @@ cpu_init_f (void)
*/
mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
#endif /* CONFIG_405EP */
-#endif /* CONFIG_405EP */
#if defined(CFG_4xx_GPIO_TABLE)
gpio_set_chip_configuration();
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index 60f89c9..e20c9eb 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -1093,10 +1093,10 @@ long int initdram(int board_type)
program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
- /*------------------------------------------------------------------
+ /*
* TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
- * board SDRAM, but may be overly concervate.
- *-----------------------------------------------------------------*/
+ * board SDRAM, but may be overly conservative.
+ */
mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
DDR0_07_TFAW_ENCODE(13) |
DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
@@ -1181,26 +1181,29 @@ long int initdram(int board_type)
denali_wait_for_dlllock();
#if defined(CONFIG_DDR_DATA_EYE)
- /* -----------------------------------------------------------+
- * Perform data eye search if requested.
- * ----------------------------------------------------------*/
- program_tlb(0, CFG_SDRAM_BASE, dram_size, TLB_WORD2_I_ENABLE);
+ /*
+ * Map the first 1 MiB of memory in the TLB, and perform the data eye
+ * search.
+ */
+ program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
denali_core_search_data_eye();
denali_sdram_register_dump();
- remove_tlb(CFG_SDRAM_BASE, dram_size);
+ remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE);
#endif
#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
program_tlb(0, CFG_SDRAM_BASE, dram_size, 0);
sync();
- eieio();
/* Zero the memory */
debug("Zeroing SDRAM...");
- dcbz_area(CFG_SDRAM_BASE, dram_size);
+#if defined(CFG_MEM_TOP_HIDE)
+ dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE);
+#else
+#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file
+#endif
dflush();
debug("Completed\n");
sync();
- eieio();
remove_tlb(CFG_SDRAM_BASE, dram_size);
#if defined(CONFIG_DDR_ECC)
@@ -1211,7 +1214,6 @@ long int initdram(int board_type)
u32 val;
sync();
- eieio();
/* Clear error status */
mfsdram(DDR0_00, val);
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
@@ -1229,7 +1231,6 @@ long int initdram(int board_type)
print_mcsr();
#endif
sync();
- eieio();
}
#endif /* defined(CONFIG_DDR_ECC) */
#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 698bcb5..8620e2b 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -218,15 +218,16 @@ static void uic_interrupt(u32 uic_base, int vec_base)
} else {
set_dcr(uic_base + UIC_ER,
get_dcr(uic_base + UIC_ER) &
- ~(0x80000000 >> vec));
+ ~(0x80000000 >> (vec & 0x1f)));
printf("Masking bogus interrupt vector %d"
" (UIC_BASE=0x%x)\n", vec, uic_base);
}
/*
- * After servicing the interrupt, we have to remove the status indicator.
+ * After servicing the interrupt, we have to remove the
+ * status indicator
*/
- set_dcr(uic_base + UIC_SR, (0x80000000 >> vec));
+ set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f)));
}
/*
generated by cgit v1.1 at 2024-09-17 20:43:33 +0000