summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/440spe_pcie.c47
-rw-r--r--cpu/ppc4xx/440spe_pcie.h19
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c3
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c58
-rw-r--r--cpu/ppc4xx/4xx_enet.c18
-rw-r--r--cpu/ppc4xx/Makefile4
-rw-r--r--cpu/ppc4xx/bedbug_405.c2
-rw-r--r--cpu/ppc4xx/dcr.S4
-rw-r--r--cpu/ppc4xx/gpio.c6
-rw-r--r--cpu/ppc4xx/interrupts.c4
-rw-r--r--cpu/ppc4xx/kgdb.S4
-rw-r--r--cpu/ppc4xx/ndfc.c2
-rw-r--r--cpu/ppc4xx/sdram.c32
-rw-r--r--cpu/ppc4xx/sdram.h2
-rw-r--r--cpu/ppc4xx/serial.c13
-rw-r--r--cpu/ppc4xx/speed.c33
-rw-r--r--cpu/ppc4xx/start.S61
-rw-r--r--cpu/ppc4xx/tlb.c62
-rw-r--r--[-rwxr-xr-x]cpu/ppc4xx/traps.c63
-rw-r--r--cpu/ppc4xx/usb.c50
-rw-r--r--cpu/ppc4xx/usbdev.c2
21 files changed, 368 insertions, 121 deletions
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index d6c4be5..bf68cc1 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006 - 2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (c) 2005 Cisco Systems. All rights reserved.
@@ -40,6 +40,34 @@ enum {
LNKW_X8 = 0x8
};
+static inline int pcie_in_8(const volatile unsigned char __iomem *addr)
+{
+ int ret;
+
+ PCIE_IN(lbzx, ret, addr);
+
+ return ret;
+}
+
+static inline int pcie_in_le16(const volatile unsigned short __iomem *addr)
+{
+ int ret;
+
+ PCIE_IN(lhbrx, ret, addr)
+
+ return ret;
+}
+
+static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr)
+{
+ unsigned ret;
+
+ PCIE_IN(lwbrx, ret, addr);
+
+ return ret;
+}
+
+
static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
int offset, int len, u32 *val) {
@@ -55,13 +83,13 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
switch (len) {
case 1:
- *val = in_8(hose->cfg_data + offset);
+ *val = pcie_in_8(hose->cfg_data + offset);
break;
case 2:
- *val = in_le16((u16 *)(hose->cfg_data + offset));
+ *val = pcie_in_le16((u16 *)(hose->cfg_data + offset));
break;
default:
- *val = in_le32((u32 *)(hose->cfg_data + offset));
+ *val = pcie_in_le32((u32*)(hose->cfg_data + offset));
break;
}
return 0;
@@ -783,9 +811,14 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
/*
* Set bus numbers on our root port
*/
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+ if (ppc440spe_revB()) {
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+ } else {
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
+ }
/*
* Set up outbound translation to hose->mem_space from PLB
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index 2becc77..eb7cecf 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -145,8 +145,8 @@
#define PECFG_PIMEN 0x33c
#define PECFG_PIM0LAL 0x340
#define PECFG_PIM0LAH 0x344
-#define PECFG_PIM1LAL 0x348
-#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
#define PECFG_PIM01SAL 0x350
#define PECFG_PIM01SAH 0x354
@@ -161,6 +161,21 @@
mtdcr(DCRN_SDR0_CFGADDR, offset); \
mtdcr(DCRN_SDR0_CFGDATA,data);})
+#define PCIE_IN(opcode, ret, addr) \
+ __asm__ __volatile__( \
+ "sync\n" \
+ #opcode " %0,0,%1\n" \
+ "1: twi 0,%0,0\n" \
+ "isync\n" \
+ "b 3f\n" \
+ "2: li %0,-1\n" \
+ "3:\n" \
+ ".section __ex_table,\"a\"\n" \
+ ".balign 4\n" \
+ ".long 1b,2b\n" \
+ ".previous\n" \
+ : "=r" (ret) : "r" (addr), "m" (*addr));
+
int ppc440spe_init_pcie(void);
int ppc440spe_init_pcie_rootport(int port);
void yucca_setup_pcie_fpga_rootpoint(int port);
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 6d6fba1..4a4c6f2 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -269,9 +269,8 @@ struct bank_param {
typedef struct bank_param BANKPARMS;
#ifdef CFG_SIMULATE_SPD_EEPROM
-extern unsigned char cfg_simulate_spd_eeprom[128];
+extern const unsigned char cfg_simulate_spd_eeprom[128];
#endif
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static unsigned char spd_read(uchar chip, uint addr);
static void get_spd_info(unsigned long *dimm_populated,
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 5fef27b..18b90ba 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -109,7 +109,7 @@
/* Defines for the Read Cycle Delay test */
#define NUMMEMTESTS 8
#define NUMMEMWORDS 8
-#define NUMLOOPS 256 /* memory test loops */
+#define NUMLOOPS 64 /* memory test loops */
#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
@@ -138,6 +138,26 @@ void __spd_ddr_init_hang (void)
}
void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
/* Private Structure Definitions */
@@ -154,7 +174,6 @@ typedef enum ddr_cas_id {
* Prototypes
*-----------------------------------------------------------------------------*/
static unsigned long sdram_memsize(void);
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -216,9 +235,7 @@ static void test(void);
#else
static void DQS_calibration_process(void);
#endif
-#if defined(DEBUG)
static void ppc440sp_sdram_register_dump(void);
-#endif
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
void dcbz_area(u32 start_address, u32 num_bytes);
void dflush(void);
@@ -469,17 +486,14 @@ long int initdram(int board_type)
*-----------------------------------------------------------------*/
mfsdram(SDRAM_WRDTR, val);
mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
/*------------------------------------------------------------------
* Set the SDRAM Clock Timing Register
*-----------------------------------------------------------------*/
mfsdram(SDRAM_CLKTR, val);
-#ifdef CFG_44x_DDR2_CKTR_180
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
-#else
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
-#endif
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+ ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
/*------------------------------------------------------------------
* Program the BxCF registers.
@@ -538,7 +552,12 @@ long int initdram(int board_type)
dram_size = sdram_memsize();
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, dram_size, 0);
/*------------------------------------------------------------------
* DQS calibration.
@@ -549,12 +568,18 @@ long int initdram(int board_type)
/*------------------------------------------------------------------
* If ecc is enabled, initialize the parity bits.
*-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
#endif
-#ifdef DEBUG
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, dram_size);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
ppc440sp_sdram_register_dump();
-#endif
return dram_size;
}
@@ -2703,6 +2728,7 @@ calibration_loop:
printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ ppc440sp_sdram_register_dump();
spd_ddr_init_hang ();
}
@@ -3028,5 +3054,9 @@ static void ppc440sp_sdram_register_dump(void)
dcr_data = mfdcr(SDRAM_R3BAS);
printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
}
+#else
+static void ppc440sp_sdram_register_dump(void)
+{
+}
#endif
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 1200d02..cc8e734 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -94,9 +94,9 @@
* network support enabled.
* Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
-#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
@@ -1415,10 +1415,8 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl)
|| (loop_count >= NUM_RX_BUFF))
break;
+
loop_count++;
- hw_p->rx_slot++;
- if (NUM_RX_BUFF == hw_p->rx_slot)
- hw_p->rx_slot = 0;
handled++;
data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */
if (data_len) {
@@ -1468,6 +1466,10 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
if (NUM_RX_BUFF == hw_p->rx_i_index)
hw_p->rx_i_index = 0;
+ hw_p->rx_slot++;
+ if (NUM_RX_BUFF == hw_p->rx_slot)
+ hw_p->rx_slot = 0;
+
/* AS.HARNOIS
* free receive buffer only when
* buffer has been handled (eth_rx)
@@ -1683,7 +1685,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
#endif
#if defined(CONFIG_NET_MULTI)
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register (dev->name,
emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
@@ -1724,7 +1726,7 @@ int eth_rx(void)
int emac4xx_miiphy_initialize (bd_t * bis)
{
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register ("ppc_4xx_eth0",
emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
@@ -1733,4 +1735,4 @@ int emac4xx_miiphy_initialize (bd_t * bis)
}
#endif /* !defined(CONFIG_NET_MULTI) */
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_NET) */
+#endif
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 4068b53..af9da5b 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,12 +27,12 @@ LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o kgdb.o
SOBJS = dcr.o
-COBJS = 405gp_pci.o 4xx_enet.o \
+COBJS = 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o \
40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
- tlb.o traps.o usb_ohci.o usbdev.o \
+ tlb.o traps.o usb_ohci.o usb.o usbdev.o \
440spe_pcie.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
index a3c2119..5ef5607 100644
--- a/cpu/ppc4xx/bedbug_405.c
+++ b/cpu/ppc4xx/bedbug_405.c
@@ -10,7 +10,7 @@
#include <bedbug/regs.h>
#include <bedbug/ppc.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) && defined(CONFIG_4xx)
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
#define MAX_BREAK_POINTS 4
diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S
index 7102364..93465a3 100644
--- a/cpu/ppc4xx/dcr.S
+++ b/cpu/ppc4xx/dcr.S
@@ -22,7 +22,7 @@
*/
#include <config.h>
-#if defined(CONFIG_4xx) && defined(CFG_CMD_SETGETDCR)
+#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
#include <ppc4xx.h>
@@ -195,4 +195,4 @@ set_dcr:
blr /* Return to calling function */
.Lfe4: .size set_dcr,.Lfe4-set_dcr
/* end set_dcr() */
-#endif /* CONFIG_4xx & CFG_CMD_SETGETDCR */
+#endif
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index 5235203..50f2fdf 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void)
out32(GPIO0_TCR, reg);
}
+#ifdef GPIO1
if (gpio_core == GPIO1) {
/*
* Setup output value
@@ -193,16 +194,17 @@ void gpio_set_chip_configuration(void)
* 0 -> low level
* else -> don't touch
*/
- reg = in32(GPIO0_OR);
+ reg = in32(GPIO1_OR);
if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
reg |= (0x80000000 >> (i));
else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
reg &= ~(0x80000000 >> (i));
- out32(GPIO0_OR, reg);
+ out32(GPIO1_OR, reg);
reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
out32(GPIO1_TCR, reg);
}
+#endif /* GPIO1 */
reg = in32(GPIO_OS(core_add+offs))
& ~(GPIO_MASK >> (j*2));
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index c5a9f02..ca565cc 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -628,7 +628,7 @@ void timer_interrupt_cpu (struct pt_regs *regs)
/****************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+#if defined(CONFIG_CMD_IRQ)
/*******************************************************************************
*
@@ -698,4 +698,4 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
+#endif
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
index be28340..8c4bbf2 100644
--- a/cpu/ppc4xx/kgdb.S
+++ b/cpu/ppc4xx/kgdb.S
@@ -34,7 +34,7 @@
#include <asm/cache.h>
#include <asm/mmu.h>
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
/*
* cache flushing routines for kgdb
*/
@@ -75,4 +75,4 @@ kgdb_flush_cache_range:
SYNC
blr
-#endif /* CFG_CMD_KGDB */
+#endif
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index f63fc79..3984577 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -31,7 +31,7 @@
#include <common.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EZ))
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index d520cd3..2724d91 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@ void sdram_init(void)
/*
* Disable memory controller.
*/
- mtsdram0(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mcopt1, 0x00000000);
/*
* Set MB0CF for bank 0.
*/
- mtsdram0(mem_mb0cf, mb0cf[i].reg);
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+ mtsdram(mem_mb0cf, mb0cf[i].reg);
+ mtsdram(mem_sdtr1, sdtr1);
+ mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
@@ -203,14 +203,34 @@ void sdram_init(void)
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
* read/prefetch.
*/
- mtsdram0(mem_mcopt1, 0x80800000);
+ mtsdram(mem_mcopt1, 0x80800000);
udelay(10000);
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
/*
- * OK, size detected -> all done
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
*/
+#ifdef CONFIG_SDRAM_BANK1
+ u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
+
+ mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+ mtsdram(mem_mcopt1, 0x80800000);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(mem_mb1cf, 0);
+ mtsdram(mem_mcopt1, 0);
+ }
+#endif
return;
}
}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442..4fb9b1a 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
#include <config.h>
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
#define ONE_BILLION 1000000000
struct sdram_conf_s {
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e62dd9d..60712b1 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -448,12 +448,17 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned long i;
unsigned long est; /* current estimate */
unsigned long plloutb;
+ unsigned long cpr_pllc;
u32 reg;
+ /* check the pll feedback source */
+ mfcpr(cprpllc, cpr_pllc);
+
get_sys_info(&sysinfo);
- plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
- / sysinfo.pllFwdDivB);
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) * sysinfo.pllFbkDiv) /
+ sysinfo.pllFwdDivB);
udiv = 256; /* Assume lowest possible serial clk */
div = plloutb / (16 * baudrate); /* total divisor */
umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
@@ -843,7 +848,7 @@ int serial_buffered_tstc (void)
#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
/*
AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
number 0 or number 1
@@ -949,7 +954,7 @@ void kgdb_interruptible (int yes)
return;
}
#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif /* CFG_CMD_KGDB */
+#endif
#if defined(CONFIG_SERIAL_MULTI)
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 028b11a..da5330a 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -771,6 +771,7 @@ ulong get_PCI_freq (void)
void get_sys_info (PPC405_SYS_INFO * sysInfo)
{
unsigned long cpr_plld;
+ unsigned long cpr_pllc;
unsigned long cpr_primad;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
unsigned long primad_cpudv;
@@ -780,6 +781,7 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Read PLL Mode registers
*/
mfcpr(cprplld, cpr_plld);
+ mfcpr(cprpllc, cpr_pllc);
/*
* Determine forward divider A
@@ -787,20 +789,18 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
/*
- * Determine forward divider B (should be equal to A)
+ * Determine forward divider B
*/
sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0) {
+ if (sysInfo->pllFwdDivB == 0)
sysInfo->pllFwdDivB = 8;
- }
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0) {
+ if (sysInfo->pllFbkDiv == 0)
sysInfo->pllFbkDiv = 256;
- }
/*
* Read CPR_PRIMAD register
@@ -810,30 +810,30 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0) {
+ if (sysInfo->pllPlbDiv == 0)
sysInfo->pllPlbDiv = 16;
- }
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0) {
+ if (sysInfo->pllExtBusDiv == 0)
sysInfo->pllExtBusDiv = 16;
- }
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0) {
+ if (sysInfo->pllOpbDiv == 0)
sysInfo->pllOpbDiv = 16;
- }
/*
* Determine the M factor
*/
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ if (cpr_pllc & PLLC_SRC_MASK)
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
/*
* Determine VCO clock frequency
@@ -845,16 +845,17 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Determine CPU clock frequency
*/
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0) {
+ if (primad_cpudv == 0)
primad_cpudv = 16;
- }
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / primad_cpudv;
/*
* Determine PLB clock frequency
*/
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+ sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
}
/********************************************
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8ecaaea..9626b65 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1870,28 +1870,6 @@ ppc405ep_init:
mtdcr ebccfgd,r3
#endif
-#ifndef CFG_CPC0_PCI
- li r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Check FPGA for PCI internal/external arbitration
- ! If board is set to internal arbitration, update cpc0_pci
- !-----------------------------------------------------------------------
- */
- addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
- ori r5,r5,FPGA_REG1@l
- lbz r5,0x0(r5) /* read to get PCI arb selection */
- andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
- beq ..pci_cfg_set /* if not set, then bypass reg write*/
-#endif
- ori r3,r3,CPC0_PCI_ARBIT_EN
-#else /* CFG_CPC0_PCI */
- li r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
- mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
-
/*
!-----------------------------------------------------------------------
! Check to see if chip is in bypass mode.
@@ -1947,11 +1925,50 @@ ppc405ep_init:
..no_pllset:
#endif /* CONFIG_BUBINGA */
+#ifdef CONFIG_TAIHU
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ addis r5,0,CPLD_REG0_ADDR@h
+ ori r5,r5,CPLD_REG0_ADDR@l
+ andi. r5, r5, 0x10
+ bne _pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
ori r4,r4,PLLMR1_DEFAULT@l /* */
+#ifdef CONFIG_TAIHU
+ b 1f
+_pci_66mhz:
+ addis r3,0,PLLMR0_DEFAULT_PCI66@h
+ ori r3,r3,PLLMR0_DEFAULT_PCI66@l
+ addis r4,0,PLLMR1_DEFAULT_PCI66@h
+ ori r4,r4,PLLMR1_DEFAULT_PCI66@l
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index 049a785..098694c 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -25,7 +25,6 @@
#if defined(CONFIG_440)
-#include <ppc4xx.h>
#include <ppc440.h>
#include <asm/io.h>
#include <asm/mmu.h>
@@ -36,6 +35,67 @@ typedef struct region {
unsigned long tlb_word2_i_value;
} region_t;
+void remove_tlb(u32 vaddr, u32 size)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+ /*
+ * Found a TLB in the range.
+ * Disable it by writing 0 to tlb0 word.
+ */
+ mttlb1(i, 0);
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
static int add_tlb_entry(unsigned long phys_addr,
unsigned long virt_addr,
unsigned long tlb_word0_size_value,
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index eb9420e..f5365cb 100755..100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -38,7 +38,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@@ -78,7 +78,7 @@ static __inline__ unsigned long get_esr(void)
#define ESR_DIZ 0x00400000
#define ESR_U0F 0x00008000
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
@@ -147,18 +147,25 @@ MachineCheckException(struct pt_regs *regs)
unsigned long fixup, val;
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
u32 value2;
+ int corr_ecc = 0;
+ int uncorr_ecc = 0;
#endif
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
+ /* Probing PCI(E) using config cycles may cause this exception
+ * when a device is not present. To gracefully recover in such
+ * scenarios config read/write routines need to be instrumented in
+ * order to return via fixup handler. For examples refer to
+ * pcie_in_8(), pcie_in_le16() and pcie_in_le32()
*/
if ((fixup = search_exception_table(regs->nip)) != 0) {
regs->nip = fixup;
+ val = mfspr(MCSR);
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
return;
}
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -214,14 +221,22 @@ MachineCheckException(struct pt_regs *regs)
printf("DDR0: At least one interrupt active\n");
if (val & 0x40)
printf("DDR0: DRAM initialization complete.\n");
- if (val & 0x20)
+ if (val & 0x20) {
printf("DDR0: Multiple uncorrectable ECC events.\n");
- if (val & 0x10)
+ uncorr_ecc = 1;
+ }
+ if (val & 0x10) {
printf("DDR0: Single uncorrectable ECC event.\n");
- if (val & 0x08)
+ uncorr_ecc = 1;
+ }
+ if (val & 0x08) {
printf("DDR0: Multiple correctable ECC events.\n");
- if (val & 0x04)
+ corr_ecc = 1;
+ }
+ if (val & 0x04) {
printf("DDR0: Single correctable ECC event.\n");
+ corr_ecc = 1;
+ }
if (val & 0x02)
printf("Multiple accesses outside the defined"
" physical memory space detected\n");
@@ -252,11 +267,11 @@ MachineCheckException(struct pt_regs *regs)
printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
}
mfsdram(DDR0_23, val);
- if ( (val >> 16) & 0xff)
+ if (((val >> 16) & 0xff) && corr_ecc)
printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
(val >> 16) & 0xff);
mfsdram(DDR0_23, val);
- if ( (val >> 8) & 0xff)
+ if (((val >> 8) & 0xff) && uncorr_ecc)
printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
(val >> 8) & 0xff);
mfsdram(DDR0_33, val);
@@ -264,28 +279,28 @@ MachineCheckException(struct pt_regs *regs)
printf("DDR0: Address of command that caused an "
"Out-of-Range interrupt %p\n", val);
mfsdram(DDR0_34, val);
- if (val)
+ if (val && uncorr_ecc)
printf("DDR0: Address of uncorrectable ECC event %p\n", val);
mfsdram(DDR0_35, val);
- if (val)
+ if (val && uncorr_ecc)
printf("DDR0: Address of uncorrectable ECC event %p\n", val);
mfsdram(DDR0_36, val);
- if (val)
+ if (val && uncorr_ecc)
printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
mfsdram(DDR0_37, val);
- if (val)
+ if (val && uncorr_ecc)
printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
mfsdram(DDR0_38, val);
- if (val)
+ if (val && corr_ecc)
printf("DDR0: Address of correctable ECC event %p\n", val);
mfsdram(DDR0_39, val);
- if (val)
+ if (val && corr_ecc)
printf("DDR0: Address of correctable ECC event %p\n", val);
mfsdram(DDR0_40, val);
- if (val)
+ if (val && corr_ecc)
printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
mfsdram(DDR0_41, val);
- if (val)
+ if (val && corr_ecc)
printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
#endif /* CONFIG_440EPX */
#endif /* CONFIG_440 */
@@ -297,7 +312,7 @@ MachineCheckException(struct pt_regs *regs)
void
AlignmentException(struct pt_regs *regs)
{
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -312,7 +327,7 @@ ProgramCheckException(struct pt_regs *regs)
{
long esr_val;
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -349,7 +364,7 @@ DecrementerPITException(struct pt_regs *regs)
void
UnknownException(struct pt_regs *regs)
{
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -364,7 +379,7 @@ DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
do_bedbug_breakpoint( regs );
#endif
}
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
new file mode 100644
index 0000000..272ed8c
--- /dev/null
+++ b/cpu/ppc4xx/usb.c
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+#include "usbdev.h"
+
+int usb_cpu_init(void)
+{
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+#endif
+
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 6140d2a..5924a6c 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
#include <usb.h>
#include "usbdev.h"