summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx/i2c.c')
-rw-r--r--cpu/ppc4xx/i2c.c417
1 files changed, 417 insertions, 0 deletions
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
new file mode 100644
index 0000000..68af057
--- /dev/null
+++ b/cpu/ppc4xx/i2c.c
@@ -0,0 +1,417 @@
+/*****************************************************************************/
+/* I2C Bus interface initialisation and I2C Commands */
+/* for PPC405GP */
+/* Author : AS HARNOIS */
+/* Date : 13.Dec.00 */
+/*****************************************************************************/
+
+#include <common.h>
+#include <ppc4xx.h>
+#if defined(CONFIG_440)
+# include <440_i2c.h>
+#else
+# include <405gp_i2c.h>
+#endif
+#include <i2c.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#define IIC_OK 0
+#define IIC_NOK 1
+#define IIC_NOK_LA 2 /* Lost arbitration */
+#define IIC_NOK_ICT 3 /* Incomplete transfer */
+#define IIC_NOK_XFRA 4 /* Transfer aborted */
+#define IIC_NOK_DATA 5 /* No data in buffer */
+#define IIC_NOK_TOUT 6 /* Transfer timeout */
+
+#define IIC_TIMEOUT 1 /* 1 seconde */
+
+
+static void _i2c_bus_reset (void)
+{
+ int i, status;
+
+ /* Reset status register */
+ /* write 1 in SCMP and IRQA to clear these fields */
+ out8 (IIC_STS, 0x0A);
+
+ /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
+ out8 (IIC_EXTSTS, 0x8F);
+ __asm__ volatile ("eieio");
+
+ /*
+ * Get current state, reset bus
+ * only if no transfers are pending.
+ */
+ i = 10;
+ do {
+ /* Get status */
+ status = in8 (IIC_STS);
+ udelay (500); /* 500us */
+ i--;
+ } while ((status & IIC_STS_PT) && (i > 0));
+ /* Soft reset controller */
+ status = in8 (IIC_XTCNTLSS);
+ out8 (IIC_XTCNTLSS, (status | IIC_XTCNTLSS_SRST));
+ __asm__ volatile ("eieio");
+
+ /* make sure where in initial state, data hi, clock hi */
+ out8 (IIC_DIRECTCNTL, 0xC);
+ for (i = 0; i < 10; i++) {
+ if ((in8 (IIC_DIRECTCNTL) & 0x3) != 0x3) {
+ /* clock until we get to known state */
+ out8 (IIC_DIRECTCNTL, 0x8); /* clock lo */
+ udelay (100); /* 100us */
+ out8 (IIC_DIRECTCNTL, 0xC); /* clock hi */
+ udelay (100); /* 100us */
+ } else {
+ break;
+ }
+ }
+ /* send start condition */
+ out8 (IIC_DIRECTCNTL, 0x4);
+ udelay (1000); /* 1ms */
+ /* send stop condition */
+ out8 (IIC_DIRECTCNTL, 0xC);
+ udelay (1000); /* 1ms */
+ /* Unreset controller */
+ out8 (IIC_XTCNTLSS, (status & ~IIC_XTCNTLSS_SRST));
+ udelay (1000); /* 1ms */
+}
+
+void i2c_init (int speed, int slaveadd)
+{
+ sys_info_t sysInfo;
+ unsigned long freqOPB;
+ int val, divisor;
+
+ /* Handle possible failed I2C state */
+ _i2c_bus_reset ();
+
+ /* clear lo master address */
+ out8 (IIC_LMADR, 0);
+
+ /* clear hi master address */
+ out8 (IIC_HMADR, 0);
+
+ /* clear lo slave address */
+ out8 (IIC_LSADR, 0);
+
+ /* clear hi slave address */
+ out8 (IIC_HSADR, 0);
+
+ /* Clock divide Register */
+ /* get OPB frequency */
+ get_sys_info (&sysInfo);
+ freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+ /* set divisor according to freqOPB */
+ divisor = (freqOPB - 1) / 10000000;
+ if (divisor == 0)
+ divisor = 1;
+ out8 (IIC_CLKDIV, divisor);
+
+ /* no interrupts */
+ out8 (IIC_INTRMSK, 0);
+
+ /* clear transfer count */
+ out8 (IIC_XFRCNT, 0);
+
+ /* clear extended control & stat */
+ /* write 1 in SRC SRS SWC SWS to clear these fields */
+ out8 (IIC_XTCNTLSS, 0xF0);
+
+ /* Mode Control Register
+ Flush Slave/Master data buffer */
+ out8 (IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+ __asm__ volatile ("eieio");
+
+
+ val = in8(IIC_MDCNTL);
+ __asm__ volatile ("eieio");
+
+ /* Ignore General Call, slave transfers are ignored,
+ disable interrupts, exit unknown bus state, enable hold
+ SCL
+ 100kHz normaly or FastMode for 400kHz and above
+ */
+
+ val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
+ if( speed >= 400000 ){
+ val |= IIC_MDCNTL_FSM;
+ }
+ out8 (IIC_MDCNTL, val);
+
+ /* clear control reg */
+ out8 (IIC_CNTL, 0x00);
+ __asm__ volatile ("eieio");
+
+}
+
+/*
+ This code tries to use the features of the 405GP i2c
+ controller. It will transfer up to 4 bytes in one pass
+ on the loop. It only does out8(lbz) to the buffer when it
+ is possible to do out16(lhz) transfers.
+
+ cmd_type is 0 for write 1 for read.
+
+ addr_len can take any value from 0-255, it is only limited
+ by the char, we could make it larger if needed. If it is
+ 0 we skip the address write cycle.
+
+ Typical case is a Write of an addr followd by a Read. The
+ IBM FAQ does not cover this. On the last byte of the write
+ we don't set the creg CHT bit, and on the first bytes of the
+ read we set the RPST bit.
+
+ It does not support address only transfers, there must be
+ a data part. If you want to write the address yourself, put
+ it in the data pointer.
+
+ It does not support transfer to/from address 0.
+
+ It does not check XFRCNT.
+*/
+static
+int i2c_transfer(unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[],
+ unsigned short data_len )
+{
+ unsigned char* ptr;
+ int reading;
+ int tran,cnt;
+ int result;
+ int status;
+ int i;
+ uchar creg;
+
+ if( data == 0 || data_len == 0 ){
+ /*Don't support data transfer of no length or to address 0*/
+ printf( "i2c_transfer: bad call\n" );
+ return IIC_NOK;
+ }
+ if( addr && addr_len ){
+ ptr = addr;
+ cnt = addr_len;
+ reading = 0;
+ }else{
+ ptr = data;
+ cnt = data_len;
+ reading = cmd_type;
+ }
+
+ /*Clear Stop Complete Bit*/
+ out8(IIC_STS,IIC_STS_SCMP);
+ /* Check init */
+ i=10;
+ do {
+ /* Get status */
+ status = in8(IIC_STS);
+ __asm__ volatile("eieio");
+ i--;
+ } while ((status & IIC_STS_PT) && (i>0));
+
+ if (status & IIC_STS_PT) {
+ result = IIC_NOK_TOUT;
+ return(result);
+ }
+ /*flush the Master/Slave Databuffers*/
+ out8(IIC_MDCNTL, ((in8(IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
+ /*need to wait 4 OPB clocks? code below should take that long*/
+
+ /* 7-bit adressing */
+ out8(IIC_HMADR,0);
+ out8(IIC_LMADR, chip);
+ __asm__ volatile("eieio");
+
+ tran = 0;
+ result = IIC_OK;
+ creg = 0;
+
+ while ( tran != cnt && (result == IIC_OK)) {
+ int bc,j;
+
+ /* Control register =
+ Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
+ Transfer is a sequence of transfers
+ */
+ creg |= IIC_CNTL_PT;
+
+ bc = (cnt - tran) > 4 ? 4 :
+ cnt - tran;
+ creg |= (bc-1)<<4;
+ /* if the real cmd type is write continue trans*/
+ if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
+ creg |= IIC_CNTL_CHT;
+
+ if (reading)
+ creg |= IIC_CNTL_READ;
+ else {
+ for(j=0; j<bc; j++) {
+ /* Set buffer */
+ out8(IIC_MDBUF,ptr[tran+j]);
+ __asm__ volatile("eieio");
+ }
+ }
+ out8(IIC_CNTL, creg );
+ __asm__ volatile("eieio");
+
+ /* Transfer is in progress
+ we have to wait for upto 5 bytes of data
+ 1 byte chip address+r/w bit then bc bytes
+ of data.
+ udelay(10) is 1 bit time at 100khz
+ Doubled for slop. 20 is too small.
+ */
+ i=2*5*8;
+ do {
+ /* Get status */
+ status = in8(IIC_STS);
+ __asm__ volatile("eieio");
+ udelay (10);
+ i--;
+ } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
+ && (i>0));
+
+ if (status & IIC_STS_ERR) {
+ result = IIC_NOK;
+ status = in8 (IIC_EXTSTS);
+ /* Lost arbitration? */
+ if (status & IIC_EXTSTS_LA)
+ result = IIC_NOK_LA;
+ /* Incomplete transfer? */
+ if (status & IIC_EXTSTS_ICT)
+ result = IIC_NOK_ICT;
+ /* Transfer aborted? */
+ if (status & IIC_EXTSTS_XFRA)
+ result = IIC_NOK_XFRA;
+ } else if ( status & IIC_STS_PT) {
+ result = IIC_NOK_TOUT;
+ }
+ /* Command is reading => get buffer */
+ if ((reading) && (result == IIC_OK)) {
+ /* Are there data in buffer */
+ if (status & IIC_STS_MDBS) {
+ /*
+ even if we have data we have to wait 4OPB clocks
+ for it to hit the front of the FIFO, after that
+ we can just read. We should check XFCNT here and
+ if the FIFO is full there is no need to wait.
+ */
+ udelay (1);
+ for(j=0;j<bc;j++) {
+ ptr[tran+j] = in8(IIC_MDBUF);
+ __asm__ volatile("eieio");
+ }
+ } else
+ result = IIC_NOK_DATA;
+ }
+ creg = 0;
+ tran+=bc;
+ if( ptr == addr && tran == cnt ) {
+ ptr = data;
+ cnt = data_len;
+ tran = 0;
+ reading = cmd_type;
+ if( reading )
+ creg = IIC_CNTL_RPST;
+ }
+ }
+ return (result);
+}
+
+int i2c_probe (uchar chip)
+{
+ uchar buf[1];
+
+ buf[0] = 0;
+
+ /*
+ * What is needed is to send the chip address and verify that the
+ * address was <ACK>ed (i.e. there was a chip at that address which
+ * drove the data line low).
+ */
+ return(i2c_transfer (1, chip << 1, 0,0, buf, 1) != 0);
+}
+
+
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ uchar xaddr[4];
+ int ret;
+
+ if ( alen > 4 ) {
+ printf ("I2C read: addr len %d not supported\n", alen);
+ return 1;
+ }
+
+ if ( alen > 0 ) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
+
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if( alen > 0 )
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+ if( (ret = i2c_transfer( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
+ printf( "I2c read: failed %d\n", ret);
+ return 1;
+ }
+ return 0;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ uchar xaddr[4];
+
+ if ( alen > 4 ) {
+ printf ("I2C write: addr len %d not supported\n", alen);
+ return 1;
+
+ }
+ if ( alen > 0 ) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if( alen > 0 )
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ return (i2c_transfer( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
+}
+
+#endif /* CONFIG_HARD_I2C */
generated by cgit v1.1 at 2024-11-18 16:37:57 +0000