diff options
Diffstat (limited to 'cpu/ppc4xx/44x_spd_ddr2.c')
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 58 |
1 files changed, 44 insertions, 14 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 5fef27b..18b90ba 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -109,7 +109,7 @@ /* Defines for the Read Cycle Delay test */ #define NUMMEMTESTS 8 #define NUMMEMWORDS 8 -#define NUMLOOPS 256 /* memory test loops */ +#define NUMLOOPS 64 /* memory test loops */ #undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */ @@ -138,6 +138,26 @@ void __spd_ddr_init_hang (void) } void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); +/* + * To provide an interface for board specific config values in this common + * DDR setup code, we implement he "weak" default functions here. They return + * the default value back to the caller. + * + * Please see include/configs/yucca.h for an example fora board specific + * implementation. + */ +u32 __ddr_wrdtr(u32 default_val) +{ + return default_val; +} +u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr"))); + +u32 __ddr_clktr(u32 default_val) +{ + return default_val; +} +u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr"))); + /* Private Structure Definitions */ @@ -154,7 +174,6 @@ typedef enum ddr_cas_id { * Prototypes *-----------------------------------------------------------------------------*/ static unsigned long sdram_memsize(void); -void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); static void get_spd_info(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -216,9 +235,7 @@ static void test(void); #else static void DQS_calibration_process(void); #endif -#if defined(DEBUG) static void ppc440sp_sdram_register_dump(void); -#endif int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); @@ -469,17 +486,14 @@ long int initdram(int board_type) *-----------------------------------------------------------------*/ mfsdram(SDRAM_WRDTR, val); mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) | - (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV)); + ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV)); /*------------------------------------------------------------------ * Set the SDRAM Clock Timing Register *-----------------------------------------------------------------*/ mfsdram(SDRAM_CLKTR, val); -#ifdef CFG_44x_DDR2_CKTR_180 - mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV); -#else - mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG); -#endif + mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | + ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG)); /*------------------------------------------------------------------ * Program the BxCF registers. @@ -538,7 +552,12 @@ long int initdram(int board_type) dram_size = sdram_memsize(); /* and program tlb entries for this size (dynamic) */ - program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); + + /* + * Program TLB entries with caches enabled, for best performace + * while auto-calibrating and ECC generation + */ + program_tlb(0, 0, dram_size, 0); /*------------------------------------------------------------------ * DQS calibration. @@ -549,12 +568,18 @@ long int initdram(int board_type) /*------------------------------------------------------------------ * If ecc is enabled, initialize the parity bits. *-----------------------------------------------------------------*/ - program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE); + program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0); #endif -#ifdef DEBUG + /* + * Now after initialization (auto-calibration and ECC generation) + * remove the TLB entries with caches enabled and program again with + * desired cache functionality + */ + remove_tlb(0, dram_size); + program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); + ppc440sp_sdram_register_dump(); -#endif return dram_size; } @@ -2703,6 +2728,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); + ppc440sp_sdram_register_dump(); spd_ddr_init_hang (); } @@ -3028,5 +3054,9 @@ static void ppc440sp_sdram_register_dump(void) dcr_data = mfdcr(SDRAM_R3BAS); printf(" MQ3_B0BAS = 0x%08X\n", dcr_data); } +#else +static void ppc440sp_sdram_register_dump(void) +{ +} #endif #endif /* CONFIG_SPD_EEPROM */ |