summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/44x_spd_ddr.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx/44x_spd_ddr.c')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c36
1 files changed, 23 insertions, 13 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index c500d3f..6d6fba1 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -70,6 +70,15 @@
#define ONE_BILLION 1000000000
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
/*-----------------------------------------------------------------------------
| Memory Controller Options 0
+-----------------------------------------------------------------------------*/
@@ -262,7 +271,7 @@ typedef struct bank_param BANKPARMS;
#ifdef CFG_SIMULATE_SPD_EEPROM
extern unsigned char cfg_simulate_spd_eeprom[128];
#endif
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static unsigned char spd_read(uchar chip, uint addr);
static void get_spd_info(unsigned long *dimm_populated,
@@ -373,7 +382,7 @@ long int spd_sdram(void) {
#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
#endif
/*
@@ -467,7 +476,7 @@ static void get_spd_info(unsigned long *dimm_populated,
if (dimm_found == FALSE) {
printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -490,7 +499,7 @@ static void check_mem_type(unsigned long *dimm_populated,
dimm_num);
printf("Only DDR SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
}
}
@@ -510,7 +519,7 @@ static void check_volt_type(unsigned long *dimm_populated,
if (voltage_type != 0x04) {
printf("ERROR: DIMM %lu with unsupported voltage level.\n",
dimm_num);
- hang();
+ spd_ddr_init_hang ();
} else {
debug("DIMM %lu voltage level supported.\n", dimm_num);
}
@@ -581,7 +590,7 @@ static void program_cfg0(unsigned long *dimm_populated,
printf("WARNING: DIMM with datawidth of %lu bits.\n",
data_width);
printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- hang();
+ spd_ddr_init_hang ();
}
break;
}
@@ -769,7 +778,7 @@ static void program_tr0(unsigned long *dimm_populated,
if ((tcyc_reg & 0x0F) >= 10) {
printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
dimm_num);
- hang();
+ spd_ddr_init_hang ();
}
cycle_time_ns_x_10[cas_index] =
@@ -849,7 +858,7 @@ static void program_tr0(unsigned long *dimm_populated,
printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range.\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1008,6 +1017,7 @@ static int short_mem_test(void)
*/
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {
+ /* printf("bank enabled base:%x\n", &membase[j]); */
membase[j] = test[i][j];
ppcDcbf((unsigned long)&(membase[j]));
}
@@ -1160,7 +1170,7 @@ static void program_tr1(void)
*/
if (window_found == FALSE) {
printf("ERROR: Cannot determine a common read delay.\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1310,7 +1320,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
printf("ERROR: Unsupported value for the banksize: %d.\n",
bank_size_id);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
switch (num_col_addr) {
@@ -1332,7 +1342,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
printf("ERROR: Unsupported value for number of "
"column addresses: %d.\n", num_col_addr);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1340,14 +1350,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
*/
cr |= SDRAM_BXCR_SDBE;
- for (i = 0; i < num_banks; i++) {
+ for (i = 0; i < num_banks; i++) {
bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
(4 << 20) * bank_size_id;
bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
dimm_num, i, ctrl_bank_num[dimm_num]+i,
bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- }
+ }
}
}