summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/440spe_pcie.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx/440spe_pcie.c')
-rw-r--r--cpu/ppc4xx/440spe_pcie.c111
1 files changed, 87 insertions, 24 deletions
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 2d0b406..158f1c5 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -40,6 +40,23 @@ enum {
LNKW_X8 = 0x8
};
+static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
+{
+ u8 *base = (u8*)hose->cfg_data;
+
+ /* use local configuration space for the first bus */
+ if (PCI_BUS(devfn) == 0) {
+ if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE)
+ base = (u8*)CFG_PCIE0_XCFGBASE;
+ if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
+ base = (u8*)CFG_PCIE1_XCFGBASE;
+ if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
+ base = (u8*)CFG_PCIE2_XCFGBASE;
+ }
+
+ return base;
+}
+
static void pcie_dmer_disable(void)
{
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
@@ -60,18 +77,35 @@ static void pcie_dmer_enable(void)
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
}
-
static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
int offset, int len, u32 *val) {
+ u8 *address;
*val = 0;
+
+ /*
+ * Bus numbers are relative to hose->first_busno
+ */
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
/*
- * 440SPE implements only one function per port
+ * NOTICE: configuration space ranges are currenlty mapped only for
+ * the first 16 buses, so such limit must be imposed. In case more
+ * buses are required the TLB settings in board/amcc/<board>/init.S
+ * need to be altered accordingly (one bus takes 1 MB of memory space).
*/
- if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+ if (PCI_BUS(devfn) >= 16)
return 0;
- devfn = PCI_BDF(0,0,0);
+ /*
+ * Only single device/single function is supported for the primary and
+ * secondary buses of the 440SPe host bridge.
+ */
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
offset += devfn << 4;
/*
@@ -101,13 +135,24 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
int offset, int len, u32 val) {
+ u8 *address;
+
/*
- * 440SPE implements only one function per port
+ * Bus numbers are relative to hose->first_busno
*/
- if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+ /*
+ * Same constraints as in pcie_read_config().
+ */
+ if (PCI_BUS(devfn) >= 16)
return 0;
- devfn = PCI_BDF(0,0,0);
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
offset += devfn << 4;
/*
@@ -137,7 +182,7 @@ int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u
u32 v;
int rv;
- rv = pcie_read_config(hose, dev, offset, 1, &v);
+ rv = pcie_read_config(hose, dev, offset, 1, &v);
*val = (u8)v;
return rv;
}
@@ -794,12 +839,12 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
volatile void *rmbase = NULL;
pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
switch (port) {
case 0:
@@ -822,14 +867,9 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
/*
* Set bus numbers on our root port
*/
- if (ppc440spe_revB()) {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
- } else {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
- }
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
/*
* Set up outbound translation to hose->mem_space from PLB
@@ -886,6 +926,29 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
in_le16((u16 *)(mbase + PCI_COMMAND)) |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
printf("PCIE:%d successfully set as rootpoint\n",port);
+
+ /* Set Device and Vendor Id */
+ switch (port) {
+ case 0:
+ out_le16(mbase + 0x200, 0xaaa0);
+ out_le16(mbase + 0x202, 0xbed0);
+ break;
+ case 1:
+ out_le16(mbase + 0x200, 0xaaa1);
+ out_le16(mbase + 0x202, 0xbed1);
+ break;
+ case 2:
+ out_le16(mbase + 0x200, 0xaaa2);
+ out_le16(mbase + 0x202, 0xbed2);
+ break;
+ default:
+ out_le16(mbase + 0x200, 0xaaa3);
+ out_le16(mbase + 0x202, 0xbed3);
+ }
+
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
}
int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
@@ -963,8 +1026,8 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
/* Enable I/O, Mem, and Busmaster cycles */
out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */
out_le16(mbase + 0x202,0xfeed); /* Setting device ID */
attempts = 10;