diff options
Diffstat (limited to 'cpu/mpc8xxx/ddr/ctrl_regs.c')
| -rw-r--r-- | cpu/mpc8xxx/ddr/ctrl_regs.c | 1366 |
1 files changed, 0 insertions, 1366 deletions
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c deleted file mode 100644 index 03f9c43..0000000 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ /dev/null @@ -1,1366 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -/* - * Generic driver for Freescale DDR/DDR2/DDR3 memory controller. - * Based on code from spd_sdram.c - * Author: James Yang [at freescale.com] - */ - -#include <common.h> -#include <asm/fsl_ddr_sdram.h> - -#include "ddr.h" - -extern unsigned int picos_to_mclk(unsigned int picos); -/* - * Determine Rtt value. - * - * This should likely be either board or controller specific. - * - * Rtt(nominal) - DDR2: - * 0 = Rtt disabled - * 1 = 75 ohm - * 2 = 150 ohm - * 3 = 50 ohm - * Rtt(nominal) - DDR3: - * 0 = Rtt disabled - * 1 = 60 ohm - * 2 = 120 ohm - * 3 = 40 ohm - * 4 = 20 ohm - * 5 = 30 ohm - * - * FIXME: Apparently 8641 needs a value of 2 - * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572 - * - * FIXME: There was some effort down this line earlier: - * - * unsigned int i; - * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) { - * if (popts->dimmslot[i].num_valid_cs - * && (popts->cs_local_opts[2*i].odt_rd_cfg - * || popts->cs_local_opts[2*i].odt_wr_cfg)) { - * rtt = 2; - * break; - * } - * } - */ -static inline int fsl_ddr_get_rtt(void) -{ - int rtt; - -#if defined(CONFIG_FSL_DDR1) - rtt = 0; -#elif defined(CONFIG_FSL_DDR2) - rtt = 3; -#else - rtt = 0; -#endif - - return rtt; -} - -/* - * compute the CAS write latency according to DDR3 spec - * CWL = 5 if tCK >= 2.5ns - * 6 if 2.5ns > tCK >= 1.875ns - * 7 if 1.875ns > tCK >= 1.5ns - * 8 if 1.5ns > tCK >= 1.25ns - */ -static inline unsigned int compute_cas_write_latency(void) -{ - unsigned int cwl; - const unsigned int mclk_ps = get_memory_clk_period_ps(); - - if (mclk_ps >= 2500) - cwl = 5; - else if (mclk_ps >= 1875) - cwl = 6; - else if (mclk_ps >= 1500) - cwl = 7; - else if (mclk_ps >= 1250) - cwl = 8; - else - cwl = 8; - return cwl; -} - -/* Chip Select Configuration (CSn_CONFIG) */ -static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const dimm_params_t *dimm_params) -{ - unsigned int cs_n_en = 0; /* Chip Select enable */ - unsigned int intlv_en = 0; /* Memory controller interleave enable */ - unsigned int intlv_ctl = 0; /* Interleaving control */ - unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */ - unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */ - unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */ - unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */ - unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */ - unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */ - - /* Compute CS_CONFIG only for existing ranks of each DIMM. */ - if ((((i&1) == 0) - && (dimm_params[i/2].n_ranks == 1)) - || (dimm_params[i/2].n_ranks == 2)) { - unsigned int n_banks_per_sdram_device; - cs_n_en = 1; - if (i == 0) { - /* These fields only available in CS0_CONFIG */ - intlv_en = popts->memctl_interleaving; - intlv_ctl = popts->memctl_interleaving_mode; - } - ap_n_en = popts->cs_local_opts[i].auto_precharge; - odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; - odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; - n_banks_per_sdram_device - = dimm_params[i/2].n_banks_per_sdram_device; - ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2; - row_bits_cs_n = dimm_params[i/2].n_row_addr - 12; - col_bits_cs_n = dimm_params[i/2].n_col_addr - 8; - } - - ddr->cs[i].config = (0 - | ((cs_n_en & 0x1) << 31) - | ((intlv_en & 0x3) << 29) - | ((intlv_ctl & 0xf) << 24) - | ((ap_n_en & 0x1) << 23) - - /* XXX: some implementation only have 1 bit starting at left */ - | ((odt_rd_cfg & 0x7) << 20) - - /* XXX: Some implementation only have 1 bit starting at left */ - | ((odt_wr_cfg & 0x7) << 16) - - | ((ba_bits_cs_n & 0x3) << 14) - | ((row_bits_cs_n & 0x7) << 8) - | ((col_bits_cs_n & 0x7) << 0) - ); - debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config); -} - -/* Chip Select Configuration 2 (CSn_CONFIG_2) */ -/* FIXME: 8572 */ -static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int pasr_cfg = 0; /* Partial array self refresh config */ - - ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24); - debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2); -} - -/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ - -#if !defined(CONFIG_FSL_DDR1) -/* - * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) - * - * Avoid writing for DDR I. The new PQ38 DDR controller - * dreams up non-zero default values to be backwards compatible. - */ -static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ - unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ - /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */ - unsigned char trrt_mclk = 0; /* Read-to-read turnaround */ - unsigned char twwt_mclk = 0; /* Write-to-write turnaround */ - - /* Active powerdown exit timing (tXARD and tXARDS). */ - unsigned char act_pd_exit_mclk; - /* Precharge powerdown exit timing (tXP). */ - unsigned char pre_pd_exit_mclk; - /* Precharge powerdown exit timing (tAXPD). */ - unsigned char taxpd_mclk; - /* Mode register set cycle time (tMRD). */ - unsigned char tmrd_mclk; - -#if defined(CONFIG_FSL_DDR3) - /* - * (tXARD and tXARDS). Empirical? - * The DDR3 spec has not tXARD, - * we use the tXP instead of it. - * tXP=max(3nCK, 7.5ns) for DDR3. - * spec has not the tAXPD, we use - * tAXPD=8, need design to confirm. - */ - int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ - act_pd_exit_mclk = picos_to_mclk(tXP); - /* Mode register MR0[A12] is '1' - fast exit */ - pre_pd_exit_mclk = act_pd_exit_mclk; - taxpd_mclk = 8; - tmrd_mclk = 4; -#else /* CONFIG_FSL_DDR2 */ - /* - * (tXARD and tXARDS). Empirical? - * tXARD = 2 for DDR2 - * tXP=2 - * tAXPD=8 - */ - act_pd_exit_mclk = 2; - pre_pd_exit_mclk = 2; - taxpd_mclk = 8; - tmrd_mclk = 2; -#endif - - ddr->timing_cfg_0 = (0 - | ((trwt_mclk & 0x3) << 30) /* RWT */ - | ((twrt_mclk & 0x3) << 28) /* WRT */ - | ((trrt_mclk & 0x3) << 26) /* RRT */ - | ((twwt_mclk & 0x3) << 24) /* WWT */ - | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */ - | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */ - | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */ - | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */ - ); - debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); -} -#endif /* defined(CONFIG_FSL_DDR2) */ - -/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ -static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, - const common_timing_params_t *common_dimm, - unsigned int cas_latency) -{ - /* Extended Activate to precharge interval (tRAS) */ - unsigned int ext_acttopre = 0; - unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */ - unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */ - unsigned int cntl_adj = 0; /* Control Adjust */ - - /* If the tRAS > 19 MCLK, we use the ext mode */ - if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13) - ext_acttopre = 1; - - ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4; - - /* If the CAS latency more than 8, use the ext mode */ - if (cas_latency > 8) - ext_caslat = 1; - - ddr->timing_cfg_3 = (0 - | ((ext_acttopre & 0x1) << 24) - | ((ext_refrec & 0xF) << 16) - | ((ext_caslat & 0x1) << 12) - | ((cntl_adj & 0x7) << 0) - ); - debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3); -} - -/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */ -static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency) -{ - /* Precharge-to-activate interval (tRP) */ - unsigned char pretoact_mclk; - /* Activate to precharge interval (tRAS) */ - unsigned char acttopre_mclk; - /* Activate to read/write interval (tRCD) */ - unsigned char acttorw_mclk; - /* CASLAT */ - unsigned char caslat_ctrl; - /* Refresh recovery time (tRFC) ; trfc_low */ - unsigned char refrec_ctrl; - /* Last data to precharge minimum interval (tWR) */ - unsigned char wrrec_mclk; - /* Activate-to-activate interval (tRRD) */ - unsigned char acttoact_mclk; - /* Last write data pair to read command issue interval (tWTR) */ - unsigned char wrtord_mclk; - - pretoact_mclk = picos_to_mclk(common_dimm->tRP_ps); - acttopre_mclk = picos_to_mclk(common_dimm->tRAS_ps); - acttorw_mclk = picos_to_mclk(common_dimm->tRCD_ps); - - /* - * Translate CAS Latency to a DDR controller field value: - * - * CAS Lat DDR I DDR II Ctrl - * Clocks SPD Bit SPD Bit Value - * ------- ------- ------- ----- - * 1.0 0 0001 - * 1.5 1 0010 - * 2.0 2 2 0011 - * 2.5 3 0100 - * 3.0 4 3 0101 - * 3.5 5 0110 - * 4.0 4 0111 - * 4.5 1000 - * 5.0 5 1001 - */ -#if defined(CONFIG_FSL_DDR1) - caslat_ctrl = (cas_latency + 1) & 0x07; -#elif defined(CONFIG_FSL_DDR2) - caslat_ctrl = 2 * cas_latency - 1; -#else - /* - * if the CAS latency more than 8 cycle, - * we need set extend bit for it at - * TIMING_CFG_3[EXT_CASLAT] - */ - if (cas_latency > 8) - cas_latency -= 8; - caslat_ctrl = 2 * cas_latency - 1; -#endif - - refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8; - wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps); - if (popts->OTF_burst_chop_en) - wrrec_mclk += 2; - - acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps); - /* - * JEDEC has min requirement for tRRD - */ -#if defined(CONFIG_FSL_DDR3) - if (acttoact_mclk < 4) - acttoact_mclk = 4; -#endif - wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps); - /* - * JEDEC has some min requirements for tWTR - */ -#if defined(CONFIG_FSL_DDR2) - if (wrtord_mclk < 2) - wrtord_mclk = 2; -#elif defined(CONFIG_FSL_DDR3) - if (wrtord_mclk < 4) - wrtord_mclk = 4; -#endif - if (popts->OTF_burst_chop_en) - wrtord_mclk += 2; - - ddr->timing_cfg_1 = (0 - | ((pretoact_mclk & 0x0F) << 28) - | ((acttopre_mclk & 0x0F) << 24) - | ((acttorw_mclk & 0xF) << 20) - | ((caslat_ctrl & 0xF) << 16) - | ((refrec_ctrl & 0xF) << 12) - | ((wrrec_mclk & 0x0F) << 8) - | ((acttoact_mclk & 0x07) << 4) - | ((wrtord_mclk & 0x07) << 0) - ); - debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); -} - -/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */ -static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) -{ - /* Additive latency */ - unsigned char add_lat_mclk; - /* CAS-to-preamble override */ - unsigned short cpo; - /* Write latency */ - unsigned char wr_lat; - /* Read to precharge (tRTP) */ - unsigned char rd_to_pre; - /* Write command to write data strobe timing adjustment */ - unsigned char wr_data_delay; - /* Minimum CKE pulse width (tCKE) */ - unsigned char cke_pls; - /* Window for four activates (tFAW) */ - unsigned short four_act; - - /* FIXME add check that this must be less than acttorw_mclk */ - add_lat_mclk = additive_latency; - cpo = popts->cpo_override; - -#if defined(CONFIG_FSL_DDR1) - /* - * This is a lie. It should really be 1, but if it is - * set to 1, bits overlap into the old controller's - * otherwise unused ACSM field. If we leave it 0, then - * the HW will magically treat it as 1 for DDR 1. Oh Yea. - */ - wr_lat = 0; -#elif defined(CONFIG_FSL_DDR2) - wr_lat = cas_latency - 1; -#else - wr_lat = compute_cas_write_latency(); -#endif - - rd_to_pre = picos_to_mclk(common_dimm->tRTP_ps); - /* - * JEDEC has some min requirements for tRTP - */ -#if defined(CONFIG_FSL_DDR2) - if (rd_to_pre < 2) - rd_to_pre = 2; -#elif defined(CONFIG_FSL_DDR3) - if (rd_to_pre < 4) - rd_to_pre = 4; -#endif - if (additive_latency) - rd_to_pre += additive_latency; - if (popts->OTF_burst_chop_en) - rd_to_pre += 2; /* according to UM */ - - wr_data_delay = popts->write_data_delay; - cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps); - four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps); - - ddr->timing_cfg_2 = (0 - | ((add_lat_mclk & 0xf) << 28) - | ((cpo & 0x1f) << 23) - | ((wr_lat & 0xf) << 19) - | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT) - | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT) - | ((cke_pls & 0x7) << 6) - | ((four_act & 0x3f) << 0) - ); - debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2); -} - -/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */ -static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm) -{ - unsigned int mem_en; /* DDR SDRAM interface logic enable */ - unsigned int sren; /* Self refresh enable (during sleep) */ - unsigned int ecc_en; /* ECC enable. */ - unsigned int rd_en; /* Registered DIMM enable */ - unsigned int sdram_type; /* Type of SDRAM */ - unsigned int dyn_pwr; /* Dynamic power management mode */ - unsigned int dbw; /* DRAM dta bus width */ - unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */ - unsigned int ncap = 0; /* Non-concurrent auto-precharge */ - unsigned int threeT_en; /* Enable 3T timing */ - unsigned int twoT_en; /* Enable 2T timing */ - unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */ - unsigned int x32_en = 0; /* x32 enable */ - unsigned int pchb8 = 0; /* precharge bit 8 enable */ - unsigned int hse; /* Global half strength override */ - unsigned int mem_halt = 0; /* memory controller halt */ - unsigned int bi = 0; /* Bypass initialization */ - - mem_en = 1; - sren = popts->self_refresh_in_sleep; - if (common_dimm->all_DIMMs_ECC_capable) { - /* Allow setting of ECC only if all DIMMs are ECC. */ - ecc_en = popts->ECC_mode; - } else { - ecc_en = 0; - } - - rd_en = (common_dimm->all_DIMMs_registered - && !common_dimm->all_DIMMs_unbuffered); - - sdram_type = CONFIG_FSL_SDRAM_TYPE; - - dyn_pwr = popts->dynamic_power; - dbw = popts->data_bus_width; - /* 8-beat burst enable DDR-III case - * we must clear it when use the on-the-fly mode, - * must set it when use the 32-bits bus mode. - */ - if (sdram_type == SDRAM_TYPE_DDR3) { - if (popts->burst_length == DDR_BL8) - eight_be = 1; - if (popts->burst_length == DDR_OTF) - eight_be = 0; - if (dbw == 0x1) - eight_be = 1; - } - - threeT_en = popts->threeT_en; - twoT_en = popts->twoT_en; - ba_intlv_ctl = popts->ba_intlv_ctl; - hse = popts->half_strength_driver_enable; - - ddr->ddr_sdram_cfg = (0 - | ((mem_en & 0x1) << 31) - | ((sren & 0x1) << 30) - | ((ecc_en & 0x1) << 29) - | ((rd_en & 0x1) << 28) - | ((sdram_type & 0x7) << 24) - | ((dyn_pwr & 0x1) << 21) - | ((dbw & 0x3) << 19) - | ((eight_be & 0x1) << 18) - | ((ncap & 0x1) << 17) - | ((threeT_en & 0x1) << 16) - | ((twoT_en & 0x1) << 15) - | ((ba_intlv_ctl & 0x7F) << 8) - | ((x32_en & 0x1) << 5) - | ((pchb8 & 0x1) << 4) - | ((hse & 0x1) << 3) - | ((mem_halt & 0x1) << 1) - | ((bi & 0x1) << 0) - ); - debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg); -} - -/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */ -static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) -{ - unsigned int frc_sr = 0; /* Force self refresh */ - unsigned int sr_ie = 0; /* Self-refresh interrupt enable */ - unsigned int dll_rst_dis; /* DLL reset disable */ - unsigned int dqs_cfg; /* DQS configuration */ - unsigned int odt_cfg; /* ODT configuration */ - unsigned int num_pr; /* Number of posted refreshes */ - unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ - unsigned int ap_en; /* Address Parity Enable */ - unsigned int d_init; /* DRAM data initialization */ - unsigned int rcw_en = 0; /* Register Control Word Enable */ - unsigned int md_en = 0; /* Mirrored DIMM Enable */ - - dll_rst_dis = 1; /* Make this configurable */ - dqs_cfg = popts->DQS_config; - if (popts->cs_local_opts[0].odt_rd_cfg - || popts->cs_local_opts[0].odt_wr_cfg) { - /* FIXME */ - odt_cfg = 2; - } else { - odt_cfg = 0; - } - - num_pr = 1; /* Make this configurable */ - - /* - * 8572 manual says - * {TIMING_CFG_1[PRETOACT] - * + [DDR_SDRAM_CFG_2[NUM_PR] - * * ({EXT_REFREC || REFREC} + 8 + 2)]} - * << DDR_SDRAM_INTERVAL[REFINT] - */ -#if defined(CONFIG_FSL_DDR3) - obc_cfg = popts->OTF_burst_chop_en; -#else - obc_cfg = 0; -#endif - - ap_en = 0; /* Make this configurable? */ - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* Use the DDR controller to auto initialize memory. */ - d_init = 1; - ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE; - debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init); -#else - /* Memory will be initialized via DMA, or not at all. */ - d_init = 0; -#endif - -#if defined(CONFIG_FSL_DDR3) - md_en = popts->mirrored_dimm; -#endif - ddr->ddr_sdram_cfg_2 = (0 - | ((frc_sr & 0x1) << 31) - | ((sr_ie & 0x1) << 30) - | ((dll_rst_dis & 0x1) << 29) - | ((dqs_cfg & 0x3) << 26) - | ((odt_cfg & 0x3) << 21) - | ((num_pr & 0xf) << 12) - | ((obc_cfg & 0x1) << 6) - | ((ap_en & 0x1) << 5) - | ((d_init & 0x1) << 4) - | ((rcw_en & 0x1) << 2) - | ((md_en & 0x1) << 0) - ); - debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2); -} - -/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) -{ - unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ - unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ - -#if defined(CONFIG_FSL_DDR3) - unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ - unsigned int srt = 0; /* self-refresh temerature, normal range */ - unsigned int asr = 0; /* auto self-refresh disable */ - unsigned int cwl = compute_cas_write_latency() - 5; - unsigned int pasr = 0; /* partial array self refresh disable */ - - if (popts->rtt_override) - rtt_wr = popts->rtt_wr_override_value; - - esdmode2 = (0 - | ((rtt_wr & 0x3) << 9) - | ((srt & 0x1) << 7) - | ((asr & 0x1) << 6) - | ((cwl & 0x7) << 3) - | ((pasr & 0x7) << 0)); -#endif - ddr->ddr_sdram_mode_2 = (0 - | ((esdmode2 & 0xFFFF) << 16) - | ((esdmode3 & 0xFFFF) << 0) - ); - debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); -} - -/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */ -static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm) -{ - unsigned int refint; /* Refresh interval */ - unsigned int bstopre; /* Precharge interval */ - - refint = picos_to_mclk(common_dimm->refresh_rate_ps); - - bstopre = popts->bstopre; - - /* refint field used 0x3FFF in earlier controllers */ - ddr->ddr_sdram_interval = (0 - | ((refint & 0xFFFF) << 16) - | ((bstopre & 0x3FFF) << 0) - ); - debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval); -} - -#if defined(CONFIG_FSL_DDR3) -/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) -{ - unsigned short esdmode; /* Extended SDRAM mode */ - unsigned short sdmode; /* SDRAM mode */ - - /* Mode Register - MR1 */ - unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */ - unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */ - unsigned int rtt; - unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */ - unsigned int al = 0; /* Posted CAS# additive latency (AL) */ - unsigned int dic = 1; /* Output driver impedance, 34ohm */ - unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal), - 1=Disable (Test/Debug) */ - - /* Mode Register - MR0 */ - unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */ - unsigned int wr; /* Write Recovery */ - unsigned int dll_rst; /* DLL Reset */ - unsigned int mode; /* Normal=0 or Test=1 */ - unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */ - /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */ - unsigned int bt; - unsigned int bl; /* BL: Burst Length */ - - unsigned int wr_mclk; - - const unsigned int mclk_ps = get_memory_clk_period_ps(); - - rtt = fsl_ddr_get_rtt(); - if (popts->rtt_override) - rtt = popts->rtt_override_value; - - if (additive_latency == (cas_latency - 1)) - al = 1; - if (additive_latency == (cas_latency - 2)) - al = 2; - - /* - * The esdmode value will also be used for writing - * MR1 during write leveling for DDR3, although the - * bits specifically related to the write leveling - * scheme will be handled automatically by the DDR - * controller. so we set the wrlvl_en = 0 here. - */ - esdmode = (0 - | ((qoff & 0x1) << 12) - | ((tdqs_en & 0x1) << 11) - | ((rtt & 0x4) << 7) /* rtt field is split */ - | ((wrlvl_en & 0x1) << 7) - | ((rtt & 0x2) << 5) /* rtt field is split */ - | ((dic & 0x2) << 4) /* DIC field is split */ - | ((al & 0x3) << 3) - | ((rtt & 0x1) << 2) /* rtt field is split */ - | ((dic & 0x1) << 1) /* DIC field is split */ - | ((dll_en & 0x1) << 0) - ); - - /* - * DLL control for precharge PD - * 0=slow exit DLL off (tXPDLL) - * 1=fast exit DLL on (tXP) - */ - dll_on = 1; - wr_mclk = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps; - if (wr_mclk >= 12) - wr = 6; - else if (wr_mclk >= 9) - wr = 5; - else - wr = wr_mclk - 4; - dll_rst = 0; /* dll no reset */ - mode = 0; /* normal mode */ - - /* look up table to get the cas latency bits */ - if (cas_latency >= 5 && cas_latency <= 11) { - unsigned char cas_latency_table[7] = { - 0x2, /* 5 clocks */ - 0x4, /* 6 clocks */ - 0x6, /* 7 clocks */ - 0x8, /* 8 clocks */ - 0xa, /* 9 clocks */ - 0xc, /* 10 clocks */ - 0xe /* 11 clocks */ - }; - caslat = cas_latency_table[cas_latency - 5]; - } - bt = 0; /* Nibble sequential */ - - switch (popts->burst_length) { - case DDR_BL8: - bl = 0; - break; - case DDR_OTF: - bl = 1; - break; - case DDR_BC4: - bl = 2; - break; - default: - printf("Error: invalid burst length of %u specified. " - " Defaulting to on-the-fly BC4 or BL8 beats.\n", - popts->burst_length); - bl = 1; - break; - } - - sdmode = (0 - | ((dll_on & 0x1) << 12) - | ((wr & 0x7) << 9) - | ((dll_rst & 0x1) << 8) - | ((mode & 0x1) << 7) - | (((caslat >> 1) & 0x7) << 4) - | ((bt & 0x1) << 3) - | ((bl & 0x3) << 0) - ); - - ddr->ddr_sdram_mode = (0 - | ((esdmode & 0xFFFF) << 16) - | ((sdmode & 0xFFFF) << 0) - ); - - debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); -} - -#else /* !CONFIG_FSL_DDR3 */ - -/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) -{ - unsigned short esdmode; /* Extended SDRAM mode */ - unsigned short sdmode; /* SDRAM mode */ - - /* - * FIXME: This ought to be pre-calculated in a - * technology-specific routine, - * e.g. compute_DDR2_mode_register(), and then the - * sdmode and esdmode passed in as part of common_dimm. - */ - - /* Extended Mode Register */ - unsigned int mrs = 0; /* Mode Register Set */ - unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */ - unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */ - unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */ - unsigned int ocd = 0; /* 0x0=OCD not supported, - 0x7=OCD default state */ - unsigned int rtt; - unsigned int al; /* Posted CAS# additive latency (AL) */ - unsigned int ods = 0; /* Output Drive Strength: - 0 = Full strength (18ohm) - 1 = Reduced strength (4ohm) */ - unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal), - 1=Disable (Test/Debug) */ - - /* Mode Register (MR) */ - unsigned int mr; /* Mode Register Definition */ - unsigned int pd; /* Power-Down Mode */ - unsigned int wr; /* Write Recovery */ - unsigned int dll_res; /* DLL Reset */ - unsigned int mode; /* Normal=0 or Test=1 */ - unsigned int caslat = 0;/* CAS# latency */ - /* BT: Burst Type (0=Sequential, 1=Interleaved) */ - unsigned int bt; - unsigned int bl; /* BL: Burst Length */ - -#if defined(CONFIG_FSL_DDR2) - const unsigned int mclk_ps = get_memory_clk_period_ps(); -#endif - - rtt = fsl_ddr_get_rtt(); - - al = additive_latency; - - esdmode = (0 - | ((mrs & 0x3) << 14) - | ((outputs & 0x1) << 12) - | ((rdqs_en & 0x1) << 11) - | ((dqs_en & 0x1) << 10) - | ((ocd & 0x7) << 7) - | ((rtt & 0x2) << 5) /* rtt field is split */ - | ((al & 0x7) << 3) - | ((rtt & 0x1) << 2) /* rtt field is split */ - | ((ods & 0x1) << 1) - | ((dll_en & 0x1) << 0) - ); - - mr = 0; /* FIXME: CHECKME */ - - /* - * 0 = Fast Exit (Normal) - * 1 = Slow Exit (Low Power) - */ - pd = 0; - -#if defined(CONFIG_FSL_DDR1) - wr = 0; /* Historical */ -#elif defined(CONFIG_FSL_DDR2) - wr = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps - 1; -#endif - dll_res = 0; - mode = 0; - -#if defined(CONFIG_FSL_DDR1) - if (1 <= cas_latency && cas_latency <= 4) { - unsigned char mode_caslat_table[4] = { - 0x5, /* 1.5 clocks */ - 0x2, /* 2.0 clocks */ - 0x6, /* 2.5 clocks */ - 0x3 /* 3.0 clocks */ - }; - caslat = mode_caslat_table[cas_latency - 1]; - } else { - printf("Warning: unknown cas_latency %d\n", cas_latency); - } -#elif defined(CONFIG_FSL_DDR2) - caslat = cas_latency; -#endif - bt = 0; - - switch (popts->burst_length) { - case DDR_BL4: - bl = 2; - break; - case DDR_BL8: - bl = 3; - break; - default: - printf("Error: invalid burst length of %u specified. " - " Defaulting to 4 beats.\n", - popts->burst_length); - bl = 2; - break; - } - - sdmode = (0 - | ((mr & 0x3) << 14) - | ((pd & 0x1) << 12) - | ((wr & 0x7) << 9) - | ((dll_res & 0x1) << 8) - | ((mode & 0x1) << 7) - | ((caslat & 0x7) << 4) - | ((bt & 0x1) << 3) - | ((bl & 0x7) << 0) - ); - - ddr->ddr_sdram_mode = (0 - | ((esdmode & 0xFFFF) << 16) - | ((sdmode & 0xFFFF) << 0) - ); - debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); -} -#endif - -/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */ -static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int init_value; /* Initialization value */ - - init_value = 0xDEADBEEF; - ddr->ddr_data_init = init_value; -} - -/* - * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL) - * The old controller on the 8540/60 doesn't have this register. - * Hope it's OK to set it (to 0) anyway. - */ -static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) -{ - unsigned int clk_adjust; /* Clock adjust */ - - clk_adjust = popts->clk_adjust; - ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23; -} - -/* DDR Initialization Address (DDR_INIT_ADDR) */ -static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int init_addr = 0; /* Initialization address */ - - ddr->ddr_init_addr = init_addr; -} - -/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */ -static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int uia = 0; /* Use initialization address */ - unsigned int init_ext_addr = 0; /* Initialization address */ - - ddr->ddr_init_ext_addr = (0 - | ((uia & 0x1) << 31) - | (init_ext_addr & 0xF) - ); -} - -/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */ -static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) -{ - unsigned int rwt = 0; /* Read-to-write turnaround for same CS */ - unsigned int wrt = 0; /* Write-to-read turnaround for same CS */ - unsigned int rrt = 0; /* Read-to-read turnaround for same CS */ - unsigned int wwt = 0; /* Write-to-write turnaround for same CS */ - unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */ - -#if defined(CONFIG_FSL_DDR3) - if (popts->burst_length == DDR_BL8) { - /* We set BL/2 for fixed BL8 */ - rrt = 0; /* BL/2 clocks */ - wwt = 0; /* BL/2 clocks */ - } else { - /* We need to set BL/2 + 2 to BC4 and OTF */ - rrt = 2; /* BL/2 + 2 clocks */ - wwt = 2; /* BL/2 + 2 clocks */ - } - dll_lock = 1; /* tDLLK = 512 clocks from spec */ -#endif - ddr->timing_cfg_4 = (0 - | ((rwt & 0xf) << 28) - | ((wrt & 0xf) << 24) - | ((rrt & 0xf) << 20) - | ((wwt & 0xf) << 16) - | (dll_lock & 0x3) - ); - debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4); -} - -/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */ -static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int rodt_on = 0; /* Read to ODT on */ - unsigned int rodt_off = 0; /* Read to ODT off */ - unsigned int wodt_on = 0; /* Write to ODT on */ - unsigned int wodt_off = 0; /* Write to ODT off */ - -#if defined(CONFIG_FSL_DDR3) - rodt_on = 3; /* 2 clocks */ - rodt_off = 4; /* 4 clocks */ - wodt_on = 2; /* 1 clocks */ - wodt_off = 4; /* 4 clocks */ -#endif - - ddr->timing_cfg_5 = (0 - | ((rodt_on & 0x1f) << 24) - | ((rodt_off & 0x7) << 20) - | ((wodt_on & 0x1f) << 12) - | ((wodt_off & 0x7) << 8) - ); - debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5); -} - -/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */ -static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en) -{ - unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */ - /* Normal Operation Full Calibration Time (tZQoper) */ - unsigned int zqoper = 0; - /* Normal Operation Short Calibration Time (tZQCS) */ - unsigned int zqcs = 0; - - if (zq_en) { - zqinit = 9; /* 512 clocks */ - zqoper = 8; /* 256 clocks */ - zqcs = 6; /* 64 clocks */ - } - - ddr->ddr_zq_cntl = (0 - | ((zq_en & 0x1) << 31) - | ((zqinit & 0xF) << 24) - | ((zqoper & 0xF) << 16) - | ((zqcs & 0xF) << 8) - ); -} - -/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */ -static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, - const memctl_options_t *popts) -{ - /* - * First DQS pulse rising edge after margining mode - * is programmed (tWL_MRD) - */ - unsigned int wrlvl_mrd = 0; - /* ODT delay after margining mode is programmed (tWL_ODTEN) */ - unsigned int wrlvl_odten = 0; - /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */ - unsigned int wrlvl_dqsen = 0; - /* WRLVL_SMPL: Write leveling sample time */ - unsigned int wrlvl_smpl = 0; - /* WRLVL_WLR: Write leveling repeition time */ - unsigned int wrlvl_wlr = 0; - /* WRLVL_START: Write leveling start time */ - unsigned int wrlvl_start = 0; - - /* suggest enable write leveling for DDR3 due to fly-by topology */ - if (wrlvl_en) { - /* tWL_MRD min = 40 nCK, we set it 64 */ - wrlvl_mrd = 0x6; - /* tWL_ODTEN 128 */ - wrlvl_odten = 0x7; - /* tWL_DQSEN min = 25 nCK, we set it 32 */ - wrlvl_dqsen = 0x5; - /* - * Write leveling sample time at least need 6 clocks - * higher than tWLO to allow enough time for progagation - * delay and sampling the prime data bits. - */ - wrlvl_smpl = 0xf; - /* - * Write leveling repetition time - * at least tWLO + 6 clocks clocks - * we set it 32 - */ - wrlvl_wlr = 0x5; - /* - * Write leveling start time - * The value use for the DQS_ADJUST for the first sample - * when write leveling is enabled. - */ - wrlvl_start = 0x8; - /* - * Override the write leveling sample and start time - * according to specific board - */ - if (popts->wrlvl_override) { - wrlvl_smpl = popts->wrlvl_sample; - wrlvl_start = popts->wrlvl_start; - } - } - - ddr->ddr_wrlvl_cntl = (0 - | ((wrlvl_en & 0x1) << 31) - | ((wrlvl_mrd & 0x7) << 24) - | ((wrlvl_odten & 0x7) << 20) - | ((wrlvl_dqsen & 0x7) << 16) - | ((wrlvl_smpl & 0xf) << 12) - | ((wrlvl_wlr & 0x7) << 8) - | ((wrlvl_start & 0x1F) << 0) - ); -} - -/* DDR Self Refresh Counter (DDR_SR_CNTR) */ -static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it) -{ - /* Self Refresh Idle Threshold */ - ddr->ddr_sr_cntr = (sr_it & 0xF) << 16; -} - -/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */ -static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */ - unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */ - unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */ - unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */ - unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */ - unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */ - unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */ - unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */ - - ddr->ddr_sdram_rcw_1 = (0 - | ((rcw0 & 0xF) << 28) - | ((rcw1 & 0xF) << 24) - | ((rcw2 & 0xF) << 20) - | ((rcw3 & 0xF) << 16) - | ((rcw4 & 0xF) << 12) - | ((rcw5 & 0xF) << 8) - | ((rcw6 & 0xF) << 4) - | ((rcw7 & 0xF) << 0) - ); -} - -/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */ -static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */ - unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */ - unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */ - unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */ - unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */ - unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */ - unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */ - unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */ - - ddr->ddr_sdram_rcw_2 = (0 - | ((rcw8 & 0xF) << 28) - | ((rcw9 & 0xF) << 24) - | ((rcw10 & 0xF) << 20) - | ((rcw11 & 0xF) << 16) - | ((rcw12 & 0xF) << 12) - | ((rcw13 & 0xF) << 8) - | ((rcw14 & 0xF) << 4) - | ((rcw15 & 0xF) << 0) - ); -} - -unsigned int -check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int res = 0; - - /* - * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are - * not set at the same time. - */ - if (ddr->ddr_sdram_cfg & 0x10000000 - && ddr->ddr_sdram_cfg & 0x00008000) { - printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] " - " should not be set at the same time.\n"); - res++; - } - - return res; -} - -unsigned int -compute_fsl_memctl_config_regs(const memctl_options_t *popts, - fsl_ddr_cfg_regs_t *ddr, - const common_timing_params_t *common_dimm, - const dimm_params_t *dimm_params, - unsigned int dbw_cap_adj) -{ - unsigned int i; - unsigned int cas_latency; - unsigned int additive_latency; - unsigned int sr_it; - unsigned int zq_en; - unsigned int wrlvl_en; - - memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t)); - - if (common_dimm == NULL) { - printf("Error: subset DIMM params struct null pointer\n"); - return 1; - } - - /* - * Process overrides first. - * - * FIXME: somehow add dereated caslat to this - */ - cas_latency = (popts->cas_latency_override) - ? popts->cas_latency_override_value - : common_dimm->lowest_common_SPD_caslat; - - additive_latency = (popts->additive_latency_override) - ? popts->additive_latency_override_value - : common_dimm->additive_latency; - - sr_it = (popts->auto_self_refresh_en) - ? popts->sr_it - : 0; - /* ZQ calibration */ - zq_en = (popts->zq_en) ? 1 : 0; - /* write leveling */ - wrlvl_en = (popts->wrlvl_en) ? 1 : 0; - - /* Chip Select Memory Bounds (CSn_BNDS) */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - unsigned long long ea = 0, sa = 0; - - if (popts->ba_intlv_ctl && (i > 0) && - ((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) { - /* Don't set up boundaries for other CS - * other than CS0, if bank interleaving - * is enabled and not CS2+CS3 interleaved. - * But we need to set the ODT_RD_CFG and - * ODT_WR_CFG for CS1_CONFIG here. - */ - set_csn_config(i, ddr, popts, dimm_params); - break; - } - - if (dimm_params[i/2].n_ranks == 0) { - debug("Skipping setup of CS%u " - "because n_ranks on DIMM %u is 0\n", i, i/2); - continue; - } - if (popts->memctl_interleaving && popts->ba_intlv_ctl) { - /* - * This works superbank 2CS - * There are 2 memory controllers configured - * identically, memory is interleaved between them, - * and each controller uses rank interleaving within - * itself. Therefore the starting and ending address - * on each controller is twice the amount present on - * each controller. - */ - unsigned long long rank_density - = dimm_params[0].capacity; - ea = (2 * (rank_density >> dbw_cap_adj)) - 1; - } - else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) { - /* - * If memory interleaving between controllers is NOT - * enabled, the starting address for each memory - * controller is distinct. However, because rank - * interleaving is enabled, the starting and ending - * addresses of the total memory on that memory - * controller needs to be programmed into its - * respective CS0_BNDS. - */ - unsigned long long rank_density - = dimm_params[i/2].rank_density; - switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { - case FSL_DDR_CS0_CS1_CS2_CS3: - /* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS - * needs to be set. - */ - sa = common_dimm->base_address; - ea = sa + (4 * (rank_density >> dbw_cap_adj))-1; - break; - case FSL_DDR_CS0_CS1_AND_CS2_CS3: - /* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS - * and CS2_CNDS need to be set. - */ - if (!(i&1)) { - sa = dimm_params[i/2].base_address; - ea = sa + (i * (rank_density >> - dbw_cap_adj)) - 1; - } - break; - case FSL_DDR_CS0_CS1: - /* CS0+CS1 interleaving, CS0_CNDS needs - * to be set - */ - sa = common_dimm->base_address; - ea = sa + (2 * (rank_density >> dbw_cap_adj))-1; - break; - case FSL_DDR_CS2_CS3: - /* CS2+CS3 interleaving*/ - if (i == 2) { - sa = dimm_params[i/2].base_address; - ea = sa + (2 * (rank_density >> - dbw_cap_adj)) - 1; - } - break; - default: /* No bank(chip-select) interleaving */ - break; - } - } - else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) { - /* - * Only the rank on CS0 of each memory controller may - * be used if memory controller interleaving is used - * without rank interleaving within each memory - * controller. However, the ending address programmed - * into each CS0 must be the sum of the amount of - * memory in the two CS0 ranks. - */ - if (i == 0) { - unsigned long long rank_density - = dimm_params[0].rank_density; - ea = (2 * (rank_density >> dbw_cap_adj)) - 1; - } - - } - else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) { - /* - * No rank interleaving and no memory controller - * interleaving. - */ - unsigned long long rank_density - = dimm_params[i/2].rank_density; - sa = dimm_params[i/2].base_address; - ea = sa + (rank_density >> dbw_cap_adj) - 1; - if (i&1) { - if ((dimm_params[i/2].n_ranks == 1)) { - /* Odd chip select, single-rank dimm */ - sa = 0; - ea = 0; - } else { - /* Odd chip select, dual-rank DIMM */ - sa += rank_density >> dbw_cap_adj; - ea += rank_density >> dbw_cap_adj; - } - } - } - - sa >>= 24; - ea >>= 24; - - ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16) /* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ - ); - - debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - set_csn_config(i, ddr, popts, dimm_params); - set_csn_config_2(i, ddr); - } - -#if !defined(CONFIG_FSL_DDR1) - set_timing_cfg_0(ddr); -#endif - - set_timing_cfg_3(ddr, common_dimm, cas_latency); - set_timing_cfg_1(ddr, popts, common_dimm, cas_latency); - set_timing_cfg_2(ddr, popts, common_dimm, - cas_latency, additive_latency); - - set_ddr_sdram_cfg(ddr, popts, common_dimm); - - set_ddr_sdram_cfg_2(ddr, popts); - set_ddr_sdram_mode(ddr, popts, common_dimm, - cas_latency, additive_latency); - set_ddr_sdram_mode_2(ddr, popts); - set_ddr_sdram_interval(ddr, popts, common_dimm); - set_ddr_data_init(ddr); - set_ddr_sdram_clk_cntl(ddr, popts); - set_ddr_init_addr(ddr); - set_ddr_init_ext_addr(ddr); - set_timing_cfg_4(ddr, popts); - set_timing_cfg_5(ddr); - - set_ddr_zq_cntl(ddr, zq_en); - set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts); - - set_ddr_sr_cntr(ddr, sr_it); - - set_ddr_sdram_rcw_1(ddr); - set_ddr_sdram_rcw_2(ddr); - - return check_fsl_memctl_config_regs(ddr); -} |