diff options
Diffstat (limited to 'cpu/mpc8xx')
| -rw-r--r-- | cpu/mpc8xx/cpu_init.c | 262 | ||||
| -rw-r--r-- | cpu/mpc8xx/serial.c | 640 | ||||
| -rw-r--r-- | cpu/mpc8xx/speed.c | 187 | ||||
| -rw-r--r-- | cpu/mpc8xx/wlkbd.c | 36 |
4 files changed, 1125 insertions, 0 deletions
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c new file mode 100644 index 0000000..abe6209 --- /dev/null +++ b/cpu/mpc8xx/cpu_init.c @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> + +#include <mpc8xx.h> +#include <commproc.h> + +#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) +void cpm_load_patch (volatile immap_t * immr); +#endif + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f (volatile immap_t * immr) +{ +#ifndef CONFIG_MBX + volatile memctl8xx_t *memctl = &immr->im_memctl; + ulong reg; +#endif + + /* SYPCR - contains watchdog control (11-9) */ + + immr->im_siu_conf.sc_sypcr = CFG_SYPCR; + +#if defined(CONFIG_WATCHDOG) + reset_8xx_watchdog (immr); +#endif /* CONFIG_WATCHDOG */ + + /* SIUMCR - contains debug pin configuration (11-6) */ + + immr->im_siu_conf.sc_siumcr |= CFG_SIUMCR; + + /* initialize timebase status and control register (11-26) */ + /* unlock TBSCRK */ + + immr->im_sitk.sitk_tbscrk = KAPWR_KEY; + immr->im_sit.sit_tbscr = CFG_TBSCR; + + /* initialize the PIT (11-31) */ + + immr->im_sitk.sitk_piscrk = KAPWR_KEY; + immr->im_sit.sit_piscr = CFG_PISCR; + + /* PLL (CPU clock) settings (15-30) */ + + immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; + +#ifndef CONFIG_MBX /* MBX board does things different */ + + /* If CFG_PLPRCR (set in the various *_config.h files) tries to + * set the MF field, then just copy CFG_PLPRCR over car_plprcr, + * otherwise OR in CFG_PLPRCR so we do not change the currentMF + * field value. + */ +#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0) + reg = CFG_PLPRCR; /* reset control bits */ +#else + reg = immr->im_clkrst.car_plprcr; + reg &= PLPRCR_MF_MSK; /* isolate MF field */ + reg |= CFG_PLPRCR; /* reset control bits */ +#endif + immr->im_clkrst.car_plprcr = reg; + + /* System integration timers. Don't change EBDF! (15-27) */ + + immr->im_clkrstk.cark_sccrk = KAPWR_KEY; + reg = immr->im_clkrst.car_sccr; + reg &= SCCR_MASK; + reg |= CFG_SCCR; + immr->im_clkrst.car_sccr = reg; + + /* + * Memory Controller: + */ + + /* perform BR0 reset that MPC850 Rev. A can't guarantee */ + reg = memctl->memc_br0; + reg &= BR_PS_MSK; /* Clear everything except Port Size bits */ + reg |= BR_V; /* then add just the "Bank Valid" bit */ + memctl->memc_br0 = reg; + + /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + * + * Depending on the size of the memory region defined by + * CFG_OR0_REMAP some boards (wide address mask) allow to map the + * CFG_MONITOR_BASE, while others (narrower address mask) can't + * map CFG_MONITOR_BASE. + * + * For example, for CONFIG_IVMS8, the CFG_MONITOR_BASE is + * 0xff000000, but CFG_OR0_REMAP's address mask is 0xfff80000. + * + * If BR0 wasn't loaded with address base 0xff000000, then BR0's + * base address remains as 0x00000000. However, the address mask + * have been narrowed to 512Kb, so CFG_MONITOR_BASE wasn't mapped + * into the Bank0. + * + * This is why CONFIG_IVMS8 and similar boards must load BR0 with + * CFG_BR0_PRELIM in advance. + * + * [Thanks to Michael Liao for this explanation. + * I owe him a free beer. - wd] + */ + +#if defined(CONFIG_GTH) || \ + defined(CONFIG_HERMES) || \ + defined(CONFIG_ICU862) || \ + defined(CONFIG_IP860) || \ + defined(CONFIG_IVML24) || \ + defined(CONFIG_IVMS8) || \ + defined(CONFIG_LWMON) || \ + defined(CONFIG_MHPC) || \ + defined(CONFIG_PCU_E) || \ + defined(CONFIG_R360MPI) || \ + defined(CONFIG_RPXCLASSIC) || \ + defined(CONFIG_RPXLITE) || \ + defined(CONFIG_SPD823TS) || \ + (defined(CONFIG_MPC860T) && defined(CONFIG_FADS)) + + memctl->memc_br0 = CFG_BR0_PRELIM; +#endif + +#if defined(CFG_OR0_REMAP) + memctl->memc_or0 = CFG_OR0_REMAP; +#endif +#if defined(CFG_OR1_REMAP) + memctl->memc_or1 = CFG_OR1_REMAP; +#endif +#if defined(CFG_OR5_REMAP) + memctl->memc_or5 = CFG_OR5_REMAP; +#endif + + /* now restrict to preliminary range */ + memctl->memc_br0 = CFG_BR0_PRELIM; + memctl->memc_or0 = CFG_OR0_PRELIM; + +#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM)) + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; +#endif + +#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */ + memctl->memc_br0 = 0; +#endif + +#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; +#endif + +#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM) + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; +#endif + +#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM) + memctl->memc_or4 = CFG_OR4_PRELIM; + memctl->memc_br4 = CFG_BR4_PRELIM; +#endif + +#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM) + memctl->memc_or5 = CFG_OR5_PRELIM; + memctl->memc_br5 = CFG_BR5_PRELIM; +#endif + +#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM) + memctl->memc_or6 = CFG_OR6_PRELIM; + memctl->memc_br6 = CFG_BR6_PRELIM; +#endif + +#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM) + memctl->memc_or7 = CFG_OR7_PRELIM; + memctl->memc_br7 = CFG_BR7_PRELIM; +#endif + +#endif /* ! CONFIG_MBX */ + + /* + * Reset CPM + */ + immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG; + do { /* Spin until command processed */ + __asm__ ("eieio"); + } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); + +#ifdef CONFIG_MBX + /* + * on the MBX, things are a little bit different: + * - we need to read the VPD to get board information + * - the plprcr is set up dynamically + * - the memory controller is set up dynamically + */ + mbx_init (); +#endif /* CONFIG_MBX */ + +#ifdef CONFIG_RPXCLASSIC + rpxclassic_init (); +#endif + +#ifdef CFG_RCCR /* must be done before cpm_load_patch() */ + /* write config value */ + immr->im_cpm.cp_rccr = CFG_RCCR; +#endif + +#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) + cpm_load_patch (immr); /* load mpc8xx microcode patch */ +#endif +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r (void) +{ +#if defined(CFG_RTCSC) || defined(CFG_RMDS) + DECLARE_GLOBAL_DATA_PTR; + + bd_t *bd = gd->bd; + volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base); +#endif + +#ifdef CFG_RTCSC + /* Unlock RTSC register */ + immr->im_sitk.sitk_rtcsck = KAPWR_KEY; + /* write config value */ + immr->im_sit.sit_rtcsc = CFG_RTCSC; +#endif + +#ifdef CFG_RMDS + /* write config value */ + immr->im_cpm.cp_rmds = CFG_RMDS; +#endif + return (0); +} diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c new file mode 100644 index 0000000..0690300 --- /dev/null +++ b/cpu/mpc8xx/serial.c @@ -0,0 +1,640 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <commproc.h> +#include <command.h> + +#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */ + +#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */ +#define SMC_INDEX 0 +#undef SCC_INDEX +#define PROFF_SMC PROFF_SMC1 +#define CPM_CR_CH_SMC CPM_CR_CH_SMC1 + +#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */ +#define SMC_INDEX 1 +#undef SCC_INDEX +#define PROFF_SMC PROFF_SMC2 +#define CPM_CR_CH_SMC CPM_CR_CH_SMC2 + +#elif defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */ +#undef SMC_INDEX +#define SCC_INDEX 0 +#define PROFF_SCC PROFF_SCC1 +#define CPM_CR_CH_SCC CPM_CR_CH_SCC1 + +#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */ +#undef SMC_INDEX +#define SCC_INDEX 1 +#define PROFF_SCC PROFF_SCC2 +#define CPM_CR_CH_SCC CPM_CR_CH_SCC2 + +#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */ +#undef SMC_INDEX +#define SCC_INDEX 2 +#define PROFF_SCC PROFF_SCC3 +#define CPM_CR_CH_SCC CPM_CR_CH_SCC3 + +#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */ +#undef SMC_INDEX +#define SCC_INDEX 3 +#define PROFF_SCC PROFF_SCC4 +#define CPM_CR_CH_SCC CPM_CR_CH_SCC4 + +#else /* CONFIG_8xx_CONS_? */ +#error "console not correctly defined" +#endif + +#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2)) + +/* + * Minimal serial functions needed to use one of the SMC ports + * as serial console interface. + */ + +int serial_init (void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile smc_t *sp; + volatile smc_uart_t *up; + volatile cbd_t *tbdf, *rbdf; + volatile cpm8xx_t *cp = &(im->im_cpm); +#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850)) + volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); +#endif + uint dpaddr; + + /* initialize pointers to SMC */ + + sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]); + up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC]; + + /* Disable transmitter/receiver. + */ + sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + + /* Enable SDMA. + */ + im->im_siu_conf.sc_sdcr = 1; + + /* clear error conditions */ +#ifdef CFG_SDSR + im->im_sdma.sdma_sdsr = CFG_SDSR; +#else + im->im_sdma.sdma_sdsr = 0x83; +#endif + + /* clear SDMA interrupt mask */ +#ifdef CFG_SDMR + im->im_sdma.sdma_sdmr = CFG_SDMR; +#else + im->im_sdma.sdma_sdmr = 0x00; +#endif + +#if defined(CONFIG_8xx_CONS_SMC1) + /* Use Port B for SMC1 instead of other functions. + */ + cp->cp_pbpar |= 0x000000c0; + cp->cp_pbdir &= ~0x000000c0; + cp->cp_pbodr &= ~0x000000c0; +#else /* CONFIG_8xx_CONS_SMC2 */ +# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850) + /* Use Port A for SMC2 instead of other functions. + */ + ip->iop_papar |= 0x00c0; + ip->iop_padir &= ~0x00c0; + ip->iop_paodr &= ~0x00c0; +# else /* must be a 860 then */ + /* Use Port B for SMC2 instead of other functions. + */ + cp->cp_pbpar |= 0x00000c00; + cp->cp_pbdir &= ~0x00000c00; + cp->cp_pbodr &= ~0x00000c00; +# endif +#endif + +#if defined(CONFIG_FADS) + /* Enable RS232 */ +#if defined(CONFIG_8xx_CONS_SMC1) + *((uint *) BCSR1) &= ~BCSR1_RS232EN_1; +#else + *((uint *) BCSR1) &= ~BCSR1_RS232EN_2; +#endif +#endif /* CONFIG_FADS */ + +#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) + /* Enable Monitor Port Transceiver */ + *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ; +#endif /* CONFIG_RPXLITE */ + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + +#ifdef CFG_ALLOC_DPRAM + dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ; +#else + dpaddr = CPM_SERIAL_BASE ; +#endif + + /* Allocate space for two buffer descriptors in the DP ram. + * For now, this address seems OK, but it may have to + * change with newer versions of the firmware. + * damm: allocating space after the two buffers for rx/tx data + */ + + rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; + rbdf->cbd_bufaddr = (uint) (rbdf+2); + rbdf->cbd_sc = 0; + tbdf = rbdf + 1; + tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; + tbdf->cbd_sc = 0; + + /* Set up the uart parameters in the parameter ram. + */ + up->smc_rbase = dpaddr; + up->smc_tbase = dpaddr+sizeof(cbd_t); + up->smc_rfcr = SMC_EB; + up->smc_tfcr = SMC_EB; + +#if defined(CONFIG_MBX) + board_serial_init(); +#endif /* CONFIG_MBX */ + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Mask all interrupts and remove anything pending. + */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* Set up the baud rate generator. + */ + serial_setbrg (); + + /* Make the first buffer the only buffer. + */ + tbdf->cbd_sc |= BD_SC_WRAP; + rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + + /* Single character receive. + */ + up->smc_mrblr = 1; + up->smc_maxidl = 0; + + /* Initialize Tx/Rx parameters. + */ + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG; + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + /* Enable transmitter/receiver. + */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + + return (0); +} + +void +serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cp = &(im->im_cpm); + + /* Set up the baud rate generator. + * See 8xx_io/commproc.c for details. + * + * Wire BRG1 to SMCx + */ + + cp->cp_simode = 0x00000000; + + cp->cp_brgc1 = + (((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN; +} + +void +serial_putc(const char c) +{ + volatile cbd_t *tbdf; + volatile char *buf; + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + + if (c == '\n') + serial_putc ('\r'); + + up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; + + tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase]; + + /* Wait for last character to go. + */ + + buf = (char *)tbdf->cbd_bufaddr; +#if 0 + __asm__("eieio"); + while (tbdf->cbd_sc & BD_SC_READY) + __asm__("eieio"); +#endif + + *buf = c; + tbdf->cbd_datlen = 1; + tbdf->cbd_sc |= BD_SC_READY; + __asm__("eieio"); +#if 1 + while (tbdf->cbd_sc & BD_SC_READY) + __asm__("eieio"); +#endif +} + +int +serial_getc(void) +{ + volatile cbd_t *rbdf; + volatile unsigned char *buf; + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + unsigned char c; + + up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; + + rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; + + /* Wait for character to show up. + */ + buf = (unsigned char *)rbdf->cbd_bufaddr; + while (rbdf->cbd_sc & BD_SC_EMPTY) + ; + c = *buf; + rbdf->cbd_sc |= BD_SC_EMPTY; + + return(c); +} + +int +serial_tstc() +{ + volatile cbd_t *rbdf; + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + + up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; + + rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; + + return(!(rbdf->cbd_sc & BD_SC_EMPTY)); +} + +#else /* ! CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */ + +int serial_init (void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile scc_t *sp; + volatile scc_uart_t *up; + volatile cbd_t *tbdf, *rbdf; + volatile cpm8xx_t *cp = &(im->im_cpm); + uint dpaddr; +#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850) + volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); +#endif + + /* initialize pointers to SCC */ + + sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]); + up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC]; + +#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2) + { /* Disable Ethernet, enable Serial */ + uchar c; + + c = pic_read (0x61); + c &= ~0x40; /* enable COM3 */ + c |= 0x80; /* disable Ethernet */ + pic_write (0x61, c); + + /* enable RTS2 */ + cp->cp_pbpar |= 0x2000; + cp->cp_pbdat |= 0x2000; + cp->cp_pbdir |= 0x2000; + } +#endif /* CONFIG_LWMON */ + + /* Disable transmitter/receiver. + */ + sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + +#if (SCC_INDEX == 2) && defined(CONFIG_MPC850) + /* + * The MPC850 has SCC3 on Port B + */ + cp->cp_pbpar |= 0x06; + cp->cp_pbdir &= ~0x06; + cp->cp_pbodr &= ~0x06; + +#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860) + /* + * Standard configuration for SCC's is on Part A + */ + ip->iop_papar |= ((3 << (2 * SCC_INDEX))); + ip->iop_padir &= ~((3 << (2 * SCC_INDEX))); + ip->iop_paodr &= ~((3 << (2 * SCC_INDEX))); +#else + /* + * The IP860 has SCC3 and SCC4 on Port D + */ + ip->iop_pdpar |= ((3 << (2 * SCC_INDEX))); +#endif + + /* Allocate space for two buffer descriptors in the DP ram. + */ + +#ifdef CFG_ALLOC_DPRAM + dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ; +#else + dpaddr = CPM_SERIAL_BASE ; +#endif + + /* Enable SDMA. + */ + im->im_siu_conf.sc_sdcr = 0x0001; + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + + rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; + rbdf->cbd_bufaddr = (uint) (rbdf+2); + rbdf->cbd_sc = 0; + tbdf = rbdf + 1; + tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; + tbdf->cbd_sc = 0; + + /* Set up the baud rate generator. + */ + serial_setbrg (); + + /* Set up the uart parameters in the parameter ram. + */ + up->scc_genscc.scc_rbase = dpaddr; + up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t); + + /* Initialize Tx/Rx parameters. + */ + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG; + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + up->scc_genscc.scc_rfcr = SCC_EB | 0x05; + up->scc_genscc.scc_tfcr = SCC_EB | 0x05; + + up->scc_genscc.scc_mrblr = 1; /* Single character receive */ + up->scc_maxidl = 0; /* disable max idle */ + up->scc_brkcr = 1; /* send one break character on stop TX */ + up->scc_parec = 0; + up->scc_frmec = 0; + up->scc_nosec = 0; + up->scc_brkec = 0; + up->scc_uaddr1 = 0; + up->scc_uaddr2 = 0; + up->scc_toseq = 0; + up->scc_char1 = 0x8000; + up->scc_char2 = 0x8000; + up->scc_char3 = 0x8000; + up->scc_char4 = 0x8000; + up->scc_char5 = 0x8000; + up->scc_char6 = 0x8000; + up->scc_char7 = 0x8000; + up->scc_char8 = 0x8000; + up->scc_rccm = 0xc0ff; + + /* Set low latency / small fifo. + */ + sp->scc_gsmrh = SCC_GSMRH_RFW; + + /* Set SCC(x) clock mode to 16x + * See 8xx_io/commproc.c for details. + * + * Wire BRG1 to SCCn + */ + + /* Set UART mode, clock divider 16 on Tx and Rx + */ + sp->scc_gsmrl |= + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + sp->scc_psmr |= SCU_PSMR_CL; + + /* Mask all interrupts and remove anything pending. + */ + sp->scc_sccm = 0; + sp->scc_scce = 0xffff; + sp->scc_dsr = 0x7e7e; + sp->scc_psmr = 0x3000; + + /* Make the first buffer the only buffer. + */ + tbdf->cbd_sc |= BD_SC_WRAP; + rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + + /* Enable transmitter/receiver. + */ + sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + return (0); +} + +void +serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cp = &(im->im_cpm); + + /* Set up the baud rate generator. + * See 8xx_io/commproc.c for details. + * + * Wire BRG1 to SCCx + */ + + cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX)); + /* no |= needed, since BRG1 is 000 */ + + cp->cp_brgc1 = + (((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN; +} + +void +serial_putc(const char c) +{ + volatile cbd_t *tbdf; + volatile char *buf; + volatile scc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + + if (c == '\n') + serial_putc ('\r'); + + up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; + + tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase]; + + /* Wait for last character to go. + */ + + buf = (char *)tbdf->cbd_bufaddr; +#if 0 + __asm__("eieio"); + while (tbdf->cbd_sc & BD_SC_READY) + __asm__("eieio"); +#endif + + *buf = c; + tbdf->cbd_datlen = 1; + tbdf->cbd_sc |= BD_SC_READY; + __asm__("eieio"); +#if 1 + while (tbdf->cbd_sc & BD_SC_READY) + __asm__("eieio"); +#endif +} + +int +serial_getc(void) +{ + volatile cbd_t *rbdf; + volatile unsigned char *buf; + volatile scc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + unsigned char c; + + up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; + + rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase]; + + /* Wait for character to show up. + */ + buf = (unsigned char *)rbdf->cbd_bufaddr; + while (rbdf->cbd_sc & BD_SC_EMPTY) + ; + c = *buf; + rbdf->cbd_sc |= BD_SC_EMPTY; + + return(c); +} + +int +serial_tstc() +{ + volatile cbd_t *rbdf; + volatile scc_uart_t *up; + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cpmp = &(im->im_cpm); + + up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; + + rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase]; + + return(!(rbdf->cbd_sc & BD_SC_EMPTY)); +} + +#endif /* CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */ + + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + +void +kgdb_serial_init(void) +{ +#if defined(CONFIG_8xx_CONS_SMC1) + serial_printf("[on SMC1] "); +#elif defined(CONFIG_8xx_CONS_SMC2) + serial_printf("[on SMC2] "); +#elif defined(CONFIG_8xx_CONS_SCC1) + serial_printf("[on SCC1] "); +#elif defined(CONFIG_8xx_CONS_SCC2) + serial_printf("[on SCC2] "); +#elif defined(CONFIG_8xx_CONS_SCC3) + serial_printf("[on SCC3] "); +#elif defined(CONFIG_8xx_CONS_SCC4) + serial_printf("[on SCC4] "); +#endif +} + +void +putDebugChar (int c) +{ + serial_putc (c); +} + +void +putDebugStr (const char *str) +{ + serial_puts (str); +} + +int +getDebugChar (void) +{ + return serial_getc(); +} + +void +kgdb_interruptible (int yes) +{ + return; +} +#endif /* CFG_CMD_KGDB */ + +#endif /* CONFIG_8xx_CONS_NONE */ diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c new file mode 100644 index 0000000..ef32371 --- /dev/null +++ b/cpu/mpc8xx/speed.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8xx.h> +#include <asm/processor.h> + +#define PITC_SHIFT 16 +#define PITR_SHIFT 16 +/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */ +#define SPEED_PIT_COUNTS 58 +#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT) +#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT) + +#if !defined(CONFIG_8xx_GCLK_FREQ) +/* Access functions for the Machine State Register */ +static __inline__ unsigned long get_msr(void) +{ + unsigned long msr; + + asm volatile("mfmsr %0" : "=r" (msr) :); + return msr; +} + +static __inline__ void set_msr(unsigned long msr) +{ + asm volatile("mtmsr %0" : : "r" (msr)); +} +#endif + +/* ------------------------------------------------------------------------- */ + +/* + * Measure CPU clock speed (core clock GCLK1, GCLK2), + * also determine bus clock speed (checking bus divider factor) + * + * (Approx. GCLK frequency in Hz) + * + * Initializes timer 2 and PIT, but disables them before return. + * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4] + * + * When measuring the CPU clock against the PIT, we count cpu clocks + * for 58/8192 seconds with a prescale divide by 177 for the cpu clock. + * These strange values for the timing interval and prescaling are used + * because the formula for the CPU clock is: + * + * CPU clock = count * (177 * (8192 / 58)) + * + * = count * 24999.7241 + * + * which is very close to + * + * = count * 25000 + * + * Since the count gives the CPU clock divided by 25000, we can get + * the CPU clock rounded to the nearest 0.1 MHz by + * + * CPU clock = ((count + 2) / 4) * 100000; + * + * The rounding is important since the measurement is sometimes going + * to be high or low by 0.025 MHz, depending on exactly how the clocks + * and counters interact. By rounding we get the exact answer for any + * CPU clock that is an even multiple of 0.1 MHz. + */ + +int get_clocks (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile immap_t *immr = (immap_t *) CFG_IMMR; +#ifndef CONFIG_8xx_GCLK_FREQ + volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer; + ulong timer2_val; + ulong msr_val; + + /* Reset + Stop Timer 2, no cascading + */ + timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2); + + /* Keep stopped, halt in debug mode + */ + timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2); + + /* Timer 2 setup: + * Output ref. interrupt disable, int. clock + * Prescale by 177. Note that prescaler divides by value + 1 + * so we must subtract 1 here. + */ + timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN; + + timerp->cpmt_tcn2 = 0; /* reset state */ + timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */ + + /* + * PIT setup: + * + * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz), + * so the count value would be SPEED_PITC_COUNTS - 1. + * But there would be an uncertainty in the start time of 1/4 + * count since when we enable the PIT the count is not + * synchronized to the 32768 Hz oscillator. The trick here is + * to start the count higher and wait until the PIT count + * changes to the required value before starting timer 2. + * + * One count high should be enough, but occasionally the start + * is off by 1 or 2 counts of 32768 Hz. With the start value + * set two counts high it seems very reliable. + */ + + immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */ + immr->im_sit.sit_pitc = SPEED_PITC_INIT; + + immr->im_sitk.sitk_piscrk = KAPWR_KEY; + immr->im_sit.sit_piscr = CFG_PISCR; + + /* + * Start measurement - disable interrupts, just in case + */ + msr_val = get_msr (); + set_msr (msr_val & ~MSR_EE); + + immr->im_sit.sit_piscr |= PISCR_PTE; + + /* spin until get exact count when we want to start */ + while (immr->im_sit.sit_pitr > SPEED_PITC); + + timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */ + while ((immr->im_sit.sit_piscr & PISCR_PS) == 0); + timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */ + + /* re-enable external interrupts if they were on */ + set_msr (msr_val); + + /* Disable timer and PIT + */ + timer2_val = timerp->cpmt_tcn2; /* save before reset timer */ + + timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2); + immr->im_sit.sit_piscr &= ~PISCR_PTE; + + gd->cpu_clk = ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */ + +#else /* CONFIG_8xx_GCLK_FREQ */ + + /* + * If for some reason measuring the gclk frequency won't + * work, we return the hardwired value. + * (For example, the cogent CMA286-60 CPU module has no + * separate oscillator for PITRTCLK) + */ + + gd->cpu_clk = CONFIG_8xx_GCLK_FREQ; + +#endif /* CONFIG_8xx_GCLK_FREQ */ + + if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) { + /* No Bus Divider active */ + gd->bus_clk = gd->cpu_clk; + } else { + /* The MPC8xx has only one BDF: half clock speed */ + gd->bus_clk = gd->cpu_clk / 2; + } + + return (0); +} + +/* ------------------------------------------------------------------------- */ diff --git a/cpu/mpc8xx/wlkbd.c b/cpu/mpc8xx/wlkbd.c new file mode 100644 index 0000000..13009e2 --- /dev/null +++ b/cpu/mpc8xx/wlkbd.c @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> + +#ifdef CONFIG_WL_4PPM_KEYBOARD + +/* WIP: Wireless keyboard on SMC + */ +int drv_wlkbd_init (void) +{ + return 0 ; +} + +#endif /* CONFIG_WL_4PPM_KEYBOARD */ |