summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc85xx')
-rw-r--r--cpu/mpc85xx/Makefile22
-rw-r--r--cpu/mpc85xx/cpu.c50
-rw-r--r--cpu/mpc85xx/cpu_init.c1
-rw-r--r--cpu/mpc85xx/i2c.c265
-rw-r--r--cpu/mpc85xx/pci.c190
-rw-r--r--cpu/mpc85xx/spd_sdram.c132
6 files changed, 282 insertions, 378 deletions
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 5298dc1..ff67dcd 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002,2003 Motorola Inc.
# Xianghua Xiao,X.Xiao@motorola.com
#
@@ -23,23 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
-OBJS = $(COBJS)
+ pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index f7fe22e..0507c47 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,7 +30,10 @@
#include <command.h>
#include <asm/cache.h>
-/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
int checkcpu (void)
{
@@ -227,3 +230,48 @@ int dma_xfer(void *dest, uint count, void *src) {
return dma_check();
}
#endif
+
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ ulong clock;
+ int len;
+
+ clock = bd->bi_busfreq;
+ p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
+#if defined(CONFIG_MPC85XX_TSEC1)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+ memcpy(p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+ memcpy(p, bd->bi_enet1addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH2)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+ memcpy(p, bd->bi_enet2addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH3)
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+ memcpy(p, bd->bi_enet3addr, 6);
+#endif
+
+}
+#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index c12b47b..9f4d36c 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -32,6 +32,7 @@
DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_CPM2
static void config_8560_ioports (volatile immap_t * immr)
{
diff --git a/cpu/mpc85xx/i2c.c b/cpu/mpc85xx/i2c.c
deleted file mode 100644
index 32dcf5d..0000000
--- a/cpu/mpc85xx/i2c.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao <x.xiao@motorola.com>
- * Adapted for Motorola 85xx chip.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CFG_HZ/4)
-
-#define I2C_Addr ((u8 *)(CFG_CCSRBAR + 0x3000))
-
-#define I2CADR &I2C_Addr[0]
-#define I2CFDR &I2C_Addr[4]
-#define I2CCCR &I2C_Addr[8]
-#define I2CCSR &I2C_Addr[12]
-#define I2CCDR &I2C_Addr[16]
-#define I2CDFSRR &I2C_Addr[20]
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-void
-i2c_init(int speed, int slaveadd)
-{
- /* stop I2C controller */
- writeb(0x0, I2CCCR);
-
- /* set clock */
- writeb(0x3f, I2CFDR);
-
- /* set default filter */
- writeb(0x10,I2CDFSRR);
-
- /* write slave address */
- writeb(slaveadd, I2CADR);
-
- /* clear status register */
- writeb(0x0, I2CCSR);
-
- /* start I2C controller */
- writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-}
-
-static __inline__ int
-i2c_wait4bus (void)
-{
- ulong timeval = get_timer (0);
-
- while (readb(I2CCSR) & MPC85xx_I2CSR_MBB) {
- if (get_timer (timeval) > TIMEOUT) {
- return -1;
- }
- }
-
- return 0;
-}
-
-static __inline__ int
-i2c_wait (int write)
-{
- u32 csr;
- ulong timeval = get_timer (0);
-
- do {
- csr = readb(I2CCSR);
-
- if (!(csr & MPC85xx_I2CSR_MIF))
- continue;
-
- writeb(0x0, I2CCSR);
-
- if (csr & MPC85xx_I2CSR_MAL) {
- debug("i2c_wait: MAL\n");
- return -1;
- }
-
- if (!(csr & MPC85xx_I2CSR_MCF)) {
- debug("i2c_wait: unfinished\n");
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & MPC85xx_I2CSR_RXAK)) {
- debug("i2c_wait: No RXACK\n");
- return -1;
- }
-
- return 0;
- } while (get_timer (timeval) < TIMEOUT);
-
- debug("i2c_wait: timed out\n");
- return -1;
-}
-
-static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
- writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX |
- (rsta?MPC85xx_I2CCR_RSTA:0),
- I2CCCR);
-
- writeb((dev << 1) | dir, I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- return 0;
-
- return 1;
-}
-
-static __inline__ int
-__i2c_write (u8 *data, int length)
-{
- int i;
-
- writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX,
- I2CCCR);
-
- for (i=0; i < length; i++) {
- writeb(data[i], I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- break;
- }
-
- return i;
-}
-
-static __inline__ int
-__i2c_read (u8 *data, int length)
-{
- int i;
-
- writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA |
- ((length == 1) ? MPC85xx_I2CCR_TXAK : 0),
- I2CCCR);
-
- /* dummy read */
- readb(I2CCDR);
-
- for (i=0; i < length; i++) {
- if (i2c_wait (I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA |
- MPC85xx_I2CCR_TXAK,
- I2CCCR);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_TXAK, I2CCCR);
-
- data[i] = readb(I2CCDR);
- }
-
- return i;
-}
-
-int
-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8*)&addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read (data, length);
-
- exit:
- writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int
-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8*)&addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write (data, length);
-
- exit:
- writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay(10000);
- return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
-}
-
-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
-{
- uchar buf[1];
-
- i2c_read (i2c_addr, reg, 1, buf, 1);
-
- return (buf[0]);
-}
-
-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
-{
- i2c_write (i2c_addr, reg, 1, &val, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index a94493e..84f839a 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -29,69 +29,101 @@
#include <asm/cpm_85xx.h>
#include <pci.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
#if defined(CONFIG_PCI)
+static struct pci_controller *pci_hose;
+
void
-pci_mpc85xx_init(struct pci_controller *hose)
+pci_mpc85xx_init(struct pci_controller *board_hose)
{
+ u16 reg16;
+ u32 dev;
+
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+#ifdef CONFIG_MPC85XX_PCI2
+ volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
+#endif
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ struct pci_controller * hose;
- u16 reg16;
+ pci_hose = board_hose;
+
+ hose = &pci_hose[0];
hose->first_busno = 0;
hose->last_busno = 0xff;
- pci_set_region(hose->regions + 0,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
pci_setup_indirect(hose,
(CFG_IMMR+0x8000),
(CFG_IMMR+0x8004));
+ /*
+ * Hose scan.
+ */
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ /* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ printf("PCI-X will only work at 66 MHz\n");
+
+ reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+ pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
+ }
+
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
pcix->potear1 = 0x00000000;
- pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+ pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
- pcix->powar1 = 0x8004401c; /* 512M MEM space */
+ pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | POWAR_MEM_512M);
- pcix->potar2 = 0x00000000;
+ pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
- pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+ pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
- pcix->powar2 = 0x80088017; /* 16M IO space */
+ pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | POWAR_IO_1M);
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
- pcix->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
- * Snoop R/W, 2G */
+ pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
- /*
- * Hose scan.
- */
- pci_register_hose(hose);
+ pcix->powar3 = 0;
+ pcix->powar4 = 0;
+ pcix->piwar2 = 0;
+ pcix->piwar3 = 0;
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
+ pci_set_region(hose->regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
- /*
- * Clear non-reserved bits in status register.
- */
- pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ pci_register_hose(hose);
#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
/*
@@ -117,6 +149,94 @@ pci_mpc85xx_init(struct pci_controller *hose)
#endif
hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC85XX_PCI2
+ hose = &pci_hose[1];
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR+0x9000),
+ (CFG_IMMR+0x9004));
+
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ pcix2->potar1 = (CFG_PCI2_MEM_BASE >> 12) & 0x000fffff;
+ pcix2->potear1 = 0x00000000;
+ pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear1 = 0x00000000;
+ pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | POWAR_MEM_512M);
+
+ pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
+ pcix2->potear2 = 0x00000000;
+ pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear2 = 0x00000000;
+ pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | POWAR_IO_1M);
+
+ pcix2->pitar1 = 0x00000000;
+ pcix2->piwbar1 = 0x00000000;
+ pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+ pcix2->powar3 = 0;
+ pcix2->powar4 = 0;
+ pcix2->piwar2 = 0;
+ pcix2->piwar3 = 0;
+
+ pci_set_region(hose->regions + 0,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ /*
+ * Hose scan.
+ */
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+#endif
}
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+#ifdef CONFIG_MPC85XX_PCI2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
#endif /* CONFIG_PCI */
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index af99282..6da5367 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -131,8 +131,8 @@ convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
800,
900,
250,
- 330, /* FIXME: Is 333 better/valid? */
- 660, /* FIXME: Is 667 better/valid? */
+ 330,
+ 660,
750,
0, /* undefined */
0 /* undefined */
@@ -146,6 +146,28 @@ convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
}
+/*
+ * Determine Refresh Rate. Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+unsigned int determine_refresh_rate(unsigned int spd_refresh)
+{
+ unsigned int refresh_time_ns[8] = {
+ 15625000, /* 0 Normal 1.00x */
+ 3900000, /* 1 Reduced .25x */
+ 7800000, /* 2 Extended .50x */
+ 31300000, /* 3 Extended 2.00x */
+ 62500000, /* 4 Extended 4.00x */
+ 125000000, /* 5 Extended 8.00x */
+ 15625000, /* 6 Normal 1.00x filler */
+ 15625000, /* 7 Normal 1.00x filler */
+ };
+
+ return picos_to_clk(refresh_time_ns[spd_refresh & 0x7]);
+}
+
+
long int
spd_sdram(void)
{
@@ -157,6 +179,10 @@ spd_sdram(void)
unsigned int rank_density;
unsigned int odt_rd_cfg, odt_wr_cfg;
unsigned int odt_cfg, mode_odt_enable;
+ unsigned int refresh_clk;
+#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
+ unsigned char clk_adjust;
+#endif
unsigned int dqs_cfg;
unsigned char twr_clk, twtr_clk, twr_auto_clk;
unsigned int tCKmin_ps, tCKmax_ps;
@@ -740,38 +766,21 @@ spd_sdram(void)
ddr->sdram_mode_2 = 0;
debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2);
-
/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
+ * Determine Refresh Rate.
*/
- {
- unsigned int refresh_clk;
- unsigned int refresh_time_ns[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- refresh_clk = picos_to_clk(refresh_time_ns[spd.refresh & 0x7]);
+ refresh_clk = determine_refresh_rate(spd.refresh & 0x7);
- /*
- * Set BSTOPRE to 0x100 for page mode
- * If auto-charge is used, set BSTOPRE = 0
- */
- ddr->sdram_interval =
- (0
- | (refresh_clk & 0x3fff) << 16
- | 0x100
- );
- debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
- }
+ /*
+ * Set BSTOPRE to 0x100 for page mode
+ * If auto-charge is used, set BSTOPRE = 0
+ */
+ ddr->sdram_interval =
+ (0
+ | (refresh_clk & 0x3fff) << 16
+ | 0x100
+ );
+ debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
/*
* Is this an ECC DDR chip?
@@ -835,28 +844,23 @@ spd_sdram(void)
#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
- {
- unsigned char clk_adjust;
-
- /*
- * Setup the clock control.
- * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
- * SDRAM_CLK_CNTL[5-7] = Clock Adjust
- * 0110 3/4 cycle late
- * 0111 7/8 cycle late
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- clk_adjust = 0x6;
- } else {
- clk_adjust = 0x7;
- }
+ /*
+ * Setup the clock control.
+ * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
+ * SDRAM_CLK_CNTL[5-7] = Clock Adjust
+ * 0110 3/4 cycle late
+ * 0111 7/8 cycle late
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ clk_adjust = 0x6;
+ else
+ clk_adjust = 0x7;
- ddr->sdram_clk_cntl = (0
+ ddr->sdram_clk_cntl = (0
| 0x80000000
| (clk_adjust << 23)
);
- debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
- }
+ debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
#endif
/*
@@ -1081,26 +1085,16 @@ ddr_enable_ecc(unsigned int dram_size)
}
}
- /* 8K */
- dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
- /* 16K */
- dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
- /* 32K */
- dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
- /* 64K */
- dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
- /* 128k */
- dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
- /* 256k */
- dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
- /* 512k */
- dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
- /* 1M */
- dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
- /* 2M */
- dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
- /* 4M */
- dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+ dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */
+ dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */
+ dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */
+ dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */
+ dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */
+ dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */
+ dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */
+ dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+ dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+ dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
for (i = 1; i < dram_size / 0x800000; i++) {
dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);