diff options
Diffstat (limited to 'cpu/mpc85xx/spd_sdram.c')
| -rw-r--r-- | cpu/mpc85xx/spd_sdram.c | 31 |
1 files changed, 21 insertions, 10 deletions
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c index 6da5367..3777f49 100644 --- a/cpu/mpc85xx/spd_sdram.c +++ b/cpu/mpc85xx/spd_sdram.c @@ -263,13 +263,14 @@ spd_sdram(void) } /* - * Adjust DDR II IO voltage biasing. It just makes it work. + * Adjust DDR II IO voltage biasing. + * Only 8548 rev 1 needs the fix */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) { - gur->ddrioovcr = (0 - | 0x80000000 /* Enable */ - | 0x10000000 /* VSEL to 1.8V */ - ); + if ((SVR_VER(get_svr()) == SVR_8548_E) && + (SVR_MJREV(get_svr()) == 1) && + (spd.mem_type == SPD_MEMTYPE_DDR2)) { + gur->ddrioovcr = (0x80000000 /* Enable */ + | 0x10000000);/* VSEL to 1.8V */ } /* @@ -786,14 +787,17 @@ spd_sdram(void) * Is this an ECC DDR chip? * But don't mess with it if the DDR controller will init mem. */ -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +#ifdef CONFIG_DDR_ECC if (spd.config == 0x02) { +#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER ddr->err_disable = 0x0000000d; +#endif ddr->err_sbe = 0x00ff0000; } + debug("DDR: err_disable = 0x%08x\n", ddr->err_disable); debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe); -#endif +#endif /* CONFIG_DDR_ECC */ asm("sync;isync;msync"); udelay(500); @@ -991,17 +995,24 @@ setup_laws_and_tlbs(unsigned int memsize) break; case 256: case 512: + tlb_size = BOOKE_PAGESZ_256M; + break; case 1024: case 2048: - tlb_size = BOOKE_PAGESZ_256M; + if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx)) + tlb_size = BOOKE_PAGESZ_1G; + else + tlb_size = BOOKE_PAGESZ_256M; break; default: puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n"); /* * The memory was not able to be mapped. + * Default to a small size. */ - return 0; + tlb_size = BOOKE_PAGESZ_64M; + memsize=64; break; } |