summaryrefslogtreecommitdiff
path: root/cpu/mpc83xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc83xx')
-rw-r--r--cpu/mpc83xx/cpu.c87
-rw-r--r--cpu/mpc83xx/spd_sdram.c189
-rw-r--r--cpu/mpc83xx/start.S38
3 files changed, 279 insertions, 35 deletions
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e49e4fe..f24d3a4 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -93,6 +93,8 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/* enable Reset Control Reg */
immap->reset.rpr = 0x52535445;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
/* confirm Reset Control Reg is enabled */
while(!((immap->reset.rcer) & RCER_CRE));
@@ -189,3 +191,88 @@ ft_cpu_setup(void *blob, bd_t *bd)
#endif
}
#endif
+
+#if defined(CONFIG_DDR_ECC)
+void dma_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile dma8349_t *dma = &immap->dma;
+ volatile u32 status = swab32(dma->dmasr0);
+ volatile u32 dmamr0 = swab32(dma->dmamr0);
+
+ debug("DMA-init\n");
+
+ /* initialize DMASARn, DMADAR and DMAABCRn */
+ dma->dmadar0 = (u32)0;
+ dma->dmasar0 = (u32)0;
+ dma->dmabcr0 = 0;
+
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* clear CS bit */
+ dmamr0 &= ~DMA_CHANNEL_START;
+ dma->dmamr0 = swab32(dmamr0);
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* while the channel is busy, spin */
+ while(status & DMA_CHANNEL_BUSY) {
+ status = swab32(dma->dmasr0);
+ }
+
+ debug("DMA-init end\n");
+}
+
+uint dma_check(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile dma8349_t *dma = &immap->dma;
+ volatile u32 status = swab32(dma->dmasr0);
+ volatile u32 byte_count = swab32(dma->dmabcr0);
+
+ /* while the channel is busy, spin */
+ while (status & DMA_CHANNEL_BUSY) {
+ status = swab32(dma->dmasr0);
+ }
+
+ if (status & DMA_CHANNEL_TRANSFER_ERROR) {
+ printf ("DMA Error: status = %x @ %d\n", status, byte_count);
+ }
+
+ return status;
+}
+
+int dma_xfer(void *dest, u32 count, void *src)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile dma8349_t *dma = &immap->dma;
+ volatile u32 dmamr0;
+
+ /* initialize DMASARn, DMADAR and DMAABCRn */
+ dma->dmadar0 = swab32((u32)dest);
+ dma->dmasar0 = swab32((u32)src);
+ dma->dmabcr0 = swab32(count);
+
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* init direct transfer, clear CS bit */
+ dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
+ DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
+ DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
+
+ dma->dmamr0 = swab32(dmamr0);
+
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* set CS to start DMA transfer */
+ dmamr0 |= DMA_CHANNEL_START;
+ dma->dmamr0 = swab32(dmamr0);
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ return ((int)dma_check());
+}
+#endif /*CONFIG_DDR_ECC*/
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 63dcd66..b4012a8 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
@@ -63,13 +66,42 @@ picos_to_clk(int picos)
return clks;
}
-unsigned int
-banksize(unsigned char row_dens)
+unsigned int banksize(unsigned char row_dens)
{
return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
}
-long int spd_sdram(int(read_spd)(uint addr))
+int read_spd(uint addr)
+{
+ return ((int) addr);
+}
+
+#undef SPD_DEBUG
+#ifdef SPD_DEBUG
+static void spd_debug(spd_eeprom_t *spd)
+{
+ printf ("\nDIMM type: %-18.18s\n", spd->mpart);
+ printf ("SPD size: %d\n", spd->info_size);
+ printf ("EEPROM size: %d\n", 1 << spd->chip_size);
+ printf ("Memory type: %d\n", spd->mem_type);
+ printf ("Row addr: %d\n", spd->nrow_addr);
+ printf ("Column addr: %d\n", spd->ncol_addr);
+ printf ("# of rows: %d\n", spd->nrows);
+ printf ("Row density: %d\n", spd->row_dens);
+ printf ("# of banks: %d\n", spd->nbanks);
+ printf ("Data width: %d\n",
+ 256 * spd->dataw_msb + spd->dataw_lsb);
+ printf ("Chip width: %d\n", spd->primw);
+ printf ("Refresh rate: %02X\n", spd->refresh);
+ printf ("CAS latencies: %02X\n", spd->cas_lat);
+ printf ("Write latencies: %02X\n", spd->write_lat);
+ printf ("tRP: %d\n", spd->trp);
+ printf ("tRCD: %d\n", spd->trcd);
+ printf ("\n");
+}
+#endif /* SPD_DEBUG */
+
+long int spd_sdram()
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
volatile ddr8349_t *ddr = &immap->ddr;
@@ -81,10 +113,10 @@ long int spd_sdram(int(read_spd)(uint addr))
unsigned char caslat;
unsigned int trfc, trfc_clk, trfc_low;
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
-
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-
+#ifdef SPD_DEBUG
+ spd_debug(&spd);
+#endif
if (spd.nrows > 2) {
puts("DDR:Only two chip selects are supported on ADS.\n");
return 0;
@@ -219,25 +251,31 @@ long int spd_sdram(int(read_spd)(uint addr))
* Only DDR I is supported
* DDR I and II have different mode-register-set definition
*/
-
- /* burst length is always 4 */
switch(caslat) {
case 2:
- ddr->sdram_mode = 0x52; /* 1.5 */
+ tmp = 0x50; /* 1.5 */
break;
case 3:
- ddr->sdram_mode = 0x22; /* 2.0 */
+ tmp = 0x20; /* 2.0 */
break;
case 4:
- ddr->sdram_mode = 0x62; /* 2.5 */
+ tmp = 0x60; /* 2.5 */
break;
case 5:
- ddr->sdram_mode = 0x32; /* 3.0 */
+ tmp = 0x30; /* 3.0 */
break;
default:
puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
return 0;
}
+#if defined (CONFIG_DDR_32BIT)
+ /* set burst length to 8 for 32-bit data path */
+ tmp |= 0x03;
+#else
+ /* set burst length to 4 - default for 64-bit data path */
+ tmp |= 0x02;
+#endif
+ ddr->sdram_mode = tmp;
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
switch(spd.refresh) {
@@ -282,8 +320,13 @@ long int spd_sdram(int(read_spd)(uint addr))
*/
#if defined(CONFIG_DDR_ECC)
if (spd.config == 0x02) {
- ddr->err_disable = 0x0000000d;
- ddr->err_sbe = 0x00ff0000;
+ /* disable error detection */
+ ddr->err_disable = ~ECC_ERROR_ENABLE;
+
+ /* set single bit error threshold to maximum value,
+ * reset counter to zero */
+ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+ (0 << ECC_ERROR_MAN_SBEC_SHIFT);
}
debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
@@ -297,7 +340,8 @@ long int spd_sdram(int(read_spd)(uint addr))
* CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
* clock cycle after address/command
*/
- ddr->sdram_clk_cntl = 0x82000000;
+ /*ddr->sdram_clk_cntl = 0x82000000;*/
+ ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
/*
* Figure out the settings for the sdram_cfg register. Build up
@@ -311,6 +355,10 @@ long int spd_sdram(int(read_spd)(uint addr))
*/
tmp = 0xc2000000;
+#if defined (CONFIG_DDR_32BIT)
+ /* in 32-Bit mode burst len is 8 beats */
+ tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
/*
* sdram_cfg[3] = RD_EN - registered DIMM enable
* A value of 0x26 indicates micron registered DIMMS (micron.com)
@@ -324,7 +372,7 @@ long int spd_sdram(int(read_spd)(uint addr))
* If the user wanted ECC (enabled via sdram_cfg[2])
*/
if (spd.config == 0x02) {
- tmp |= 0x20000000;
+ tmp |= SDRAM_CFG_ECC_EN;
}
#endif
@@ -340,37 +388,94 @@ long int spd_sdram(int(read_spd)(uint addr))
udelay(500);
debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-
- return memsize;/*in MBytes*/
+ return memsize; /*in MBytes*/
}
#endif /* CONFIG_SPD_EEPROM */
#if defined(CONFIG_DDR_ECC)
/*
- * Initialize all of memory for ECC, then enable errors.
+ * Use timebase counter, get_timer() is not availabe
+ * at this point of initialization yet.
*/
+static __inline__ unsigned long get_tbms (void)
+{
+ unsigned long tbl;
+ unsigned long tbu1, tbu2;
+ unsigned long ms;
+ unsigned long long tmp;
+
+ ulong tbclk = get_tbclk();
+
+ /* get the timebase ticks */
+ do {
+ asm volatile ("mftbu %0":"=r" (tbu1):);
+ asm volatile ("mftb %0":"=r" (tbl):);
+ asm volatile ("mftbu %0":"=r" (tbu2):);
+ } while (tbu1 != tbu2);
+
+ /* convert ticks to ms */
+ tmp = (unsigned long long)(tbu1);
+ tmp = (tmp << 32);
+ tmp += (unsigned long long)(tbl);
+ ms = tmp/(tbclk/1000);
+
+ return ms;
+}
-void
-ddr_enable_ecc(unsigned int dram_size)
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+//#define CONFIG_DDR_ECC_INIT_VIA_DMA
+void ddr_enable_ecc(unsigned int dram_size)
{
-#ifndef FIXME
- uint *p = 0;
- uint i = 0;
+ uint *p;
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ volatile ddr8349_t *ddr = &immap->ddr;
+ unsigned long t_start, t_end;
+#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+ uint i;
+#endif
+
+ debug("Initialize a Cachline in DRAM\n");
+ icache_enable();
+#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+ /* Initialise DMA for direct Transfers */
dma_init();
+#endif
+
+ t_start = get_tbms();
- for (*p = 0; p < (uint *)(8 * 1024); p++) {
+#if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+ debug("DDR init: Cache flush method\n");
+ for (p = 0; p < (uint *)(dram_size); p++) {
if (((unsigned int)p & 0x1f) == 0) {
ppcDcbz((unsigned long) p);
}
+
+ /* write pattern to cache and flush */
*p = (unsigned int)0xdeadbeef;
+
if (((unsigned int)p & 0x1c) == 0x1c) {
ppcDcbf((unsigned long) p);
}
}
+#else
+ printf("DDR init: DMA method\n");
+ for (p = 0; p < (uint *)(8 * 1024); p++) {
+ /* zero one data cache line */
+ if (((unsigned int)p & 0x1f) == 0) {
+ ppcDcbz((unsigned long)p);
+ }
+
+ /* write pattern to it and flush */
+ *p = (unsigned int)0xdeadbeef;
+
+ if (((unsigned int)p & 0x1c) == 0x1c) {
+ ppcDcbf((unsigned long)p);
+ }
+ }
/* 8K */
dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
@@ -396,13 +501,31 @@ ddr_enable_ecc(unsigned int dram_size)
for (i = 1; i < dram_size / 0x800000; i++) {
dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
}
-
- /*
- * Enable errors for ECC.
- */
- ddr->err_disable = 0x00000000;
- asm("sync;isync");
#endif
-}
+ t_end = get_tbms();
+ icache_disable();
+
+ debug("\nREADY!!\n");
+ debug("ddr init duration: %ld ms\n", t_end - t_start);
+
+ /* Clear All ECC Errors */
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
+ ddr->err_detect |= ECC_ERROR_DETECT_MME;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
+ ddr->err_detect |= ECC_ERROR_DETECT_MBE;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
+ ddr->err_detect |= ECC_ERROR_DETECT_SBE;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
+ ddr->err_detect |= ECC_ERROR_DETECT_MSE;
+
+ /* Disable ECC-Interrupts */
+ ddr->err_int_en &= ECC_ERR_INT_DISABLE;
+
+ /* Enable errors for ECC */
+ ddr->err_disable &= ECC_ERROR_ENABLE;
+
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+}
#endif /* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 46c748f..6e02cce 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -796,7 +796,7 @@ icache_disable:
.globl icache_status
icache_status:
mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_SHIFT, 31, 31
+ rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
blr
.globl dcache_enable
@@ -828,7 +828,7 @@ dcache_disable:
.globl dcache_status
dcache_status:
mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_SHIFT, 31, 31
+ rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
blr
.globl get_pvr
@@ -836,6 +836,40 @@ get_pvr:
mfspr r3, PVR
blr
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbf */
+/* Description: Data Cache block flush */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbf
+ppcDcbf:
+ dcbf r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbi */
+/* Description: Data Cache block Invalidate */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbi
+ppcDcbi:
+ dcbi r0,r3
+ blr
+
+/*--------------------------------------------------------------------------
+ * Function: ppcDcbz
+ * Description: Data Cache block zero.
+ * Input: r3 = effective address
+ * Output: none.
+ *-------------------------------------------------------------------------- */
+
+ .globl ppcDcbz
+ppcDcbz:
+ dcbz r0,r3
+ blr
+
/*-------------------------------------------------------------------*/
/*
generated by cgit v1.1 at 2024-12-02 17:14:04 +0000