diff options
Diffstat (limited to 'cpu/mpc83xx/cpu.c')
-rw-r--r-- | cpu/mpc83xx/cpu.c | 130 |
1 files changed, 127 insertions, 3 deletions
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 8c9b515..20bba6c 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -35,12 +35,14 @@ #include <watchdog.h> #include <command.h> #include <mpc83xx.h> +#include <ft_build.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu(void) { - DECLARE_GLOBAL_DATA_PTR; ulong clock = gd->cpu_clk; u32 pvr = get_pvr(); char buf[32]; @@ -92,6 +94,8 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) /* enable Reset Control Reg */ immap->reset.rpr = 0x52535445; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); /* confirm Reset Control Reg is enabled */ while(!((immap->reset.rcer) & RCER_CRE)); @@ -135,8 +139,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) unsigned long get_tbclk(void) { - DECLARE_GLOBAL_DATA_PTR; - ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; @@ -151,3 +153,125 @@ void watchdog_reset (void) hang(); /* FIXME: implement watchdog_reset()? */ } #endif /* CONFIG_WATCHDOG */ + +#if defined(CONFIG_OF_FLAT_TREE) +void +ft_cpu_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + ulong clock; + + clock = bd->bi_busfreq; + p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + +#ifdef CONFIG_MPC83XX_TSEC1 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); + memcpy(p, bd->bi_enetaddr, 6); +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); + memcpy(p, bd->bi_enet1addr, 6); +#endif +} +#endif + +#if defined(CONFIG_DDR_ECC) +void dma_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile dma8349_t *dma = &immap->dma; + volatile u32 status = swab32(dma->dmasr0); + volatile u32 dmamr0 = swab32(dma->dmamr0); + + debug("DMA-init\n"); + + /* initialize DMASARn, DMADAR and DMAABCRn */ + dma->dmadar0 = (u32)0; + dma->dmasar0 = (u32)0; + dma->dmabcr0 = 0; + + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* clear CS bit */ + dmamr0 &= ~DMA_CHANNEL_START; + dma->dmamr0 = swab32(dmamr0); + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* while the channel is busy, spin */ + while(status & DMA_CHANNEL_BUSY) { + status = swab32(dma->dmasr0); + } + + debug("DMA-init end\n"); +} + +uint dma_check(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile dma8349_t *dma = &immap->dma; + volatile u32 status = swab32(dma->dmasr0); + volatile u32 byte_count = swab32(dma->dmabcr0); + + /* while the channel is busy, spin */ + while (status & DMA_CHANNEL_BUSY) { + status = swab32(dma->dmasr0); + } + + if (status & DMA_CHANNEL_TRANSFER_ERROR) { + printf ("DMA Error: status = %x @ %d\n", status, byte_count); + } + + return status; +} + +int dma_xfer(void *dest, u32 count, void *src) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile dma8349_t *dma = &immap->dma; + volatile u32 dmamr0; + + /* initialize DMASARn, DMADAR and DMAABCRn */ + dma->dmadar0 = swab32((u32)dest); + dma->dmasar0 = swab32((u32)src); + dma->dmabcr0 = swab32(count); + + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* init direct transfer, clear CS bit */ + dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT | + DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B | + DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN); + + dma->dmamr0 = swab32(dmamr0); + + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* set CS to start DMA transfer */ + dmamr0 |= DMA_CHANNEL_START; + dma->dmamr0 = swab32(dmamr0); + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + return ((int)dma_check()); +} +#endif /*CONFIG_DDR_ECC*/ |