summaryrefslogtreecommitdiff
path: root/cpu/mpc824x/drivers/errors.h
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc824x/drivers/errors.h')
-rw-r--r--cpu/mpc824x/drivers/errors.h212
1 files changed, 0 insertions, 212 deletions
diff --git a/cpu/mpc824x/drivers/errors.h b/cpu/mpc824x/drivers/errors.h
deleted file mode 100644
index 20794a2..0000000
--- a/cpu/mpc824x/drivers/errors.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* Copyright Motorola, Inc. 1993, 1994
- ALL RIGHTS RESERVED
-
- You are hereby granted a copyright license to use, modify, and
- distribute the SOFTWARE so long as this entire notice is retained
- without alteration in any modified and/or redistributed versions,
- and that such modified versions are clearly identified as such.
- No licenses are granted by implication, estoppel or otherwise under
- any patents or trademarks of Motorola, Inc.
-
- The SOFTWARE is provided on an "AS IS" basis and without warranty.
- To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
- ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
- PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
- REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
- THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-
- To the maximum extent permitted by applicable law, IN NO EVENT SHALL
- MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
- (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
- BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
- INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
- INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility
- for the maintenance and support of the SOFTWARE.
-
-*/
-
-
-#include "config.h"
-
-/*
- 1 2 3 4 5 6 7 8
-01234567890123456789012345678901234567890123456789012345678901234567890123456789
-*/
-/* List define statements here */
-
-/* These are for all the toolboxes and functions to use. These will help
-to standardize the error handling in the current project */
-
- /* this is the "data type" for the error
- messages in the system */
-#define STATUS unsigned int
-
- /* this is a success status code */
-#define SUCCESS 1
-
- /* likewise this is failure */
-#define FAILURE 0
-
-#define NUM_ERRORS 47
-
-/* This first section of "defines" are for error codes ONLY. The called
- routine will return one of these error codes to the caller. If the final
- returned code is "VALID", then everything is a-okay. However, if one
- of the functions returns a non-valid status, that error code should be
- propogated back to all the callers. At the end, the last caller will
- call an error_processing function, and send in the status which was
- returned. It's up to the error_processing function to determine which
- error occured (as indicated by the status), and print an appropriate
- message back to the user.
-*/
-/*----------------------------------------------------------------------*/
-/* these are specifically for the parser routines */
-
-#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
-#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
-#define ILLEGAL_RD_STAGE 0xfb02 /* cannot specify reg. family in range*/
-#define ILLEGAL_REG_FAMILY 0xfb03 /* "cannot specify a range of special
- or miscellaneous registers"*/
-#define RANGE_CROSS_FAMILY 0xfb04 /* "cannot specify a range across
- register families" */
-#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
-#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
-#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
-#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
-#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
-#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the error checking toolbox */
-
-#define INVALID 0xfd00 /* NOT valid */
-#define VALID 0xfd01 /* valid */
-
- /* This error is found in the fcn:
- is_right_size_input() to indicate
- that the input was not 8 characters
- long. */
-#define INVALID_SIZE 0xfd02
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the address given falls outside
- of valid memory defined by MEM_START
- to MEM_END.
- */
-#define OUT_OF_BOUNDS_ADDRESS 0xfd03
-
- /* This error is found in the fcn:
- is_valid_hex_input() to indicate that
- one of more of the characters entered
- are not valid hex characters. Valid
- hex characters are 0-9, A-F, a-f.
- */
-#define INVALID_HEX_INPUT 0xfd04
-
- /* This error is found in the fcn:
- is_valid_register_number() to indicate
- that a given register does not exist.
- */
-#define REG_NOT_READABLE 0xfd05
-
- /* This error is found in the fcn:
- is_word_aligned_address() to indicate
- that the given address is not word-
- aligned. A word-aligned address ends
- in 0x0,0x4,0x8,0xc.
- */
-#define NOT_WORD_ALIGNED 0xfd07
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the starting address is greater
- than the ending address.
- */
-#define REVERSED_ADDRESS 0xfd08
-
- /* this error tells us that the address
- specified as the destination is within
- the source addresses */
-#define RANGE_OVERLAP 0xfd09
-
-
-#define ERROR 0xfd0a /* An error occured */
-#define INVALID_PARAM 0xfd0b /* "invalid input parameter " */
-
-
-#define INVALID_FLAG 0xfd0c /* invalid flag */
-
-/*----------------------------------------------------------------------*/
-/* these are for the getarg toolbox */
-
-#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
-#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the tokenizer toolbox */
-
-#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
-#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
-#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
-#define INVALID_STRING 0xFF03 /* unable to extract string from input */
-#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
-#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
-#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
-#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
-#define NO_OPEN_IBS 0xFF08 /* "no open input buffers" */
-
-
-/* these are for the read from screen toolbox */
-
-#define RESERVED_WORD 0xFC00 /* used a reserved word as an arguement*/
-
-
-/* these are for the breakpoint routines */
-
-#define FULL_BPDS 0xFA00 /* breakpoint data structure is full */
-
-
-/* THESE are for the downloader */
-
-#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
-#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
-#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
-#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
-
-
-/* these are for the compression and decompression stuff */
-
-#define COMP_UNK_CHARACTER 0xf800 /* "unknown compressed character " */
-
-#define COMP_UNKNOWN_STATE 0xf801 /* "unknown binary state" */
-
-#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
-
-
-/* these are for the DUART handling things */
-
- /* "unrecognized serial port configuration" */
-#define UNKNOWN_PORT_STATE 0xf700
-
-
-/* these are for the register toolbox */
-
- /* "cannot find register in special
- purpose register file " */
-#define SPR_NOT_FOUND 0xf600
-
-
-/* these are for the duart specific stuff */
-
- /* "transparent mode needs access to
- two serial ports" */
-#define TM_NEEDS_BOTH_PORTS 0xf500
-
-
-/*----------------------------------------------------------------------*/
-/* these are specifically for the flash routines */
-#define FLASH_ERROR 0xf100 /* general flash error */