diff options
Diffstat (limited to 'cpu/mpc8220')
| -rw-r--r-- | cpu/mpc8220/Makefile | 4 | ||||
| -rw-r--r-- | cpu/mpc8220/cpu_init.c | 4 | ||||
| -rw-r--r-- | cpu/mpc8220/dramSetup.c | 7 | ||||
| -rw-r--r-- | cpu/mpc8220/fec.c | 7 | ||||
| -rw-r--r-- | cpu/mpc8220/pci.c | 191 | ||||
| -rw-r--r-- | cpu/mpc8220/serial.c | 131 | ||||
| -rw-r--r-- | cpu/mpc8220/uart.c | 12 |
7 files changed, 206 insertions, 150 deletions
diff --git a/cpu/mpc8220/Makefile b/cpu/mpc8220/Makefile index 8b9979d..7c9b6c9 100644 --- a/cpu/mpc8220/Makefile +++ b/cpu/mpc8220/Makefile @@ -28,8 +28,8 @@ LIB = lib$(CPU).a START = start.o ASOBJS = io.o fec_dma_tasks.o OBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \ - interrupts.o loadtask.o serial.o speed.o \ - traps.o uart.o + interrupts.o loadtask.o speed.o \ + traps.o uart.o pci.o all: .depend $(START) $(ASOBJS) $(LIB) diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c index a1e2f65..8c358a8 100644 --- a/cpu/mpc8220/cpu_init.c +++ b/cpu/mpc8220/cpu_init.c @@ -49,6 +49,8 @@ void cpu_init_f (void) portcfg->pcfg1 = 0; portcfg->pcfg2 = 0; portcfg->pcfg3 = 0; + portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG; + portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG; /* * Flexbus Controller: configure chip selects and enable them @@ -109,7 +111,7 @@ void cpu_init_f (void) /* Master Priority Enable */ xlbarb->mastPriority = 0; - xlbarb->mastPriEn = 0x1f; + xlbarb->mastPriEn = 0xff; } /* diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c index 90a7183..1d0d384 100644 --- a/cpu/mpc8220/dramSetup.c +++ b/cpu/mpc8220/dramSetup.c @@ -543,12 +543,7 @@ u32 dramSetup (void) } /* Set up the Drive Strength register */ - temp = ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) - | (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) - | (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) - | (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) - | (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)); - sysconf->sdramds = temp; + sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH; /* ********************** Cfg 1 ************************* */ diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c index 96228e5..5746823 100644 --- a/cpu/mpc8220/fec.c +++ b/cpu/mpc8220/fec.c @@ -15,11 +15,10 @@ #include "fec.h" #define DEBUG 0 -/*tbd - rtm */ -/*#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ - defined(CONFIG_MPC8220_FEC)*/ +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ + defined(CONFIG_MPC8220_FEC) -#if (CONFIG_COMMANDS & CFG_CMD_NET) +/*#if (CONFIG_COMMANDS & CFG_CMD_NET)*/ #if (DEBUG & 0x60) static void tfifo_print (mpc8220_fec_priv * fec); diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c new file mode 100644 index 0000000..ca4a04d --- /dev/null +++ b/cpu/mpc8220/pci.c @@ -0,0 +1,191 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * Copyright (C) 2003 Motorola Inc. + * Xianghua Xiao (x.xiao@motorola.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI Configuration space access support for MPC8220 PCI Bridge + */ +#include <common.h> +#include <mpc8220.h> +#include <pci.h> +#include <asm/io.h> + +#if defined(CONFIG_PCI) + +/* System RAM mapped over PCI */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define cfg_read(val, addr, type, op) *val = op((type)(addr)); +#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); + +#define PCI_OP(rw, size, type, op, mask) \ +int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 addr = 0; \ + u16 cfg_type = 0; \ + addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ + out_be32(hose->cfg_addr, addr); \ + __asm__ __volatile__("sync"); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + out_be32(hose->cfg_addr, addr & 0x7fffffff); \ + __asm__ __volatile__("sync"); \ + return 0; \ +} + +PCI_OP(read, byte, u8 *, in_8, 3) +PCI_OP(read, word, u16 *, in_le16, 2) +PCI_OP(write, byte, u8, out_8, 3) +PCI_OP(write, word, u16, out_le16, 2) +PCI_OP(write, dword, u32, out_le32, 0) + +int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev, + int offset, u32 *val) +{ + u32 addr; + u32 tmpv; + u32 mask = 2; /* word access */ + /* Read lower 16 bits */ + addr = ((offset & 0xfc) | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("sync"); + *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("sync"); + + /* Read upper 16 bits */ + offset += 2; + addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("sync"); + tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("sync"); + + /* combine results into dword value */ + *val = (tmpv << 16) | *val; + + return 0; +} + +void +pci_mpc8220_init(struct pci_controller *hose) +{ + u32 win0, win1, win2; + volatile mpc8220_xcpci_t *xcpci = + (volatile mpc8220_xcpci_t *) MMAP_XCPCI; + + volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG; + + win0 = (u32) CONFIG_PCI_MEM_PHYS; + win1 = (u32) CONFIG_PCI_IO_PHYS; + win2 = (u32) CONFIG_PCI_CFG_PHYS; + + /* Assert PCI reset */ + out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR); + + /* Disable prefetching but read-multiples will still prefetch */ + out_be32 (&xcpci->target_ctrl, 0x00000000); + + /* Initiator windows */ + out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000); + out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 )); + out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 )); + + out_be32 (&xcpci->init_win_cfg, + PCI_INIT_WIN_CFG_WIN0_CTRL_EN | + PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO | + PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO); + + out_be32 (&xcpci->init_ctrl, 0x00000000); + + /* Enable bus master and mem access */ + out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M); + + /* Cache line size and master latency */ + out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT)); + + out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */ + out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */ + + out_be32 (&xcpci->target_bar0, + PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN); + out_be32 (&xcpci->target_bar1, + PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN); + + /* Deassert reset bit */ + out_be32 (&xcpci->glb_stat_ctl, 0x00000000); + + /* Enable PCI bus master support */ + /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, + PCIREQ2, PCIGNT2 */ + out_be32((volatile u32 *)&portcfg->pcfg3, + (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F)); + out_be32((volatile u32 *)&portcfg->pcfg3, + (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180)); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + + pci_set_region(hose->regions + 2, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + CONFIG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + hose->cfg_addr = &(xcpci->cfg_adr); + hose->cfg_data = CONFIG_PCI_CFG_BUS; + + pci_set_ops(hose, + mpc8220_pci_read_config_byte, + mpc8220_pci_read_config_word, + mpc8220_pci_read_config_dword, + mpc8220_pci_write_config_byte, + mpc8220_pci_write_config_word, + mpc8220_pci_write_config_dword); + + /* Hose scan */ + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); + + out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */ + out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */ +} + +#endif /* CONFIG_PCI */ diff --git a/cpu/mpc8220/serial.c b/cpu/mpc8220/serial.c deleted file mode 100644 index 08285b8..0000000 --- a/cpu/mpc8220/serial.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Minimal serial functions needed to use one of the PSC ports - * as serial console interface. - */ - -#include <common.h> -#include <mpc8220.h> - -int serial_init (void) -{ - DECLARE_GLOBAL_DATA_PTR; - -#if defined (CONFIG_EXTUART_CONSOLE) - volatile uchar *cpld = (volatile uchar *) CFG_CPLD_BASE; -#endif - - /* Check CPLD Switch 2 whether is external or internal */ -#if defined (CONFIG_EXTUART_CONSOLE) - if ((*cpld & 0x02) == 0x02) { - gd->bExtUart = 1; - return ext_serial_init (); - } else -#endif - { -#if defined(CONFIG_PSC_CONSOLE) - gd->bExtUart = 0; - return psc_serial_init (); -#endif - } - - return (0); -} - -void serial_putc (const char c) -{ - DECLARE_GLOBAL_DATA_PTR; - - if (gd->bExtUart) { -#if defined (CONFIG_EXTUART_CONSOLE) - ext_serial_putc (c); -#endif - } else { -#if defined(CONFIG_PSC_CONSOLE) - psc_serial_putc (c); -#endif - } -} - -void serial_puts (const char *s) -{ - DECLARE_GLOBAL_DATA_PTR; - - if (gd->bExtUart) { -#if defined (CONFIG_EXTUART_CONSOLE) - ext_serial_puts (s); -#endif - } else { -#if defined(CONFIG_PSC_CONSOLE) - psc_serial_puts (s); -#endif - } -} - -int serial_getc (void) -{ - DECLARE_GLOBAL_DATA_PTR; - - if (gd->bExtUart) { -#if defined (CONFIG_EXTUART_CONSOLE) - return ext_serial_getc (); -#endif - } else { -#if defined(CONFIG_PSC_CONSOLE) - return psc_serial_getc (); -#endif - } -} - -int serial_tstc (void) -{ - DECLARE_GLOBAL_DATA_PTR; - - if (gd->bExtUart) { -#if defined (CONFIG_EXTUART_CONSOLE) - return ext_serial_tstc (); -#endif - } else { -#if defined(CONFIG_PSC_CONSOLE) - return psc_serial_tstc (); -#endif - } -} - -void serial_setbrg (void) -{ - DECLARE_GLOBAL_DATA_PTR; - - if (gd->bExtUart) { -#if defined (CONFIG_EXTUART_CONSOLE) - ext_serial_setbrg (); -#endif - } else { -#if defined(CONFIG_PSC_CONSOLE) - psc_serial_setbrg (); -#endif - } -} diff --git a/cpu/mpc8220/uart.c b/cpu/mpc8220/uart.c index 42ae325..5f54aac 100644 --- a/cpu/mpc8220/uart.c +++ b/cpu/mpc8220/uart.c @@ -33,7 +33,7 @@ #define PSC_BASE MMAP_PSC1 #if defined(CONFIG_PSC_CONSOLE) -int psc_serial_init (void) +int serial_init (void) { DECLARE_GLOBAL_DATA_PTR; volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; @@ -68,7 +68,7 @@ int psc_serial_init (void) return (0); } -void psc_serial_putc (const char c) +void serial_putc (const char c) { volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; @@ -81,14 +81,14 @@ void psc_serial_putc (const char c) psc->xmitbuf[0] = c; } -void psc_serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } -int psc_serial_getc (void) +int serial_getc (void) { volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; @@ -97,14 +97,14 @@ int psc_serial_getc (void) return psc->xmitbuf[2]; } -int psc_serial_tstc (void) +int serial_tstc (void) { volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; return (psc->sr_csr & PSC_SR_RXRDY); } -void psc_serial_setbrg (void) +void serial_setbrg (void) { DECLARE_GLOBAL_DATA_PTR; |