diff options
Diffstat (limited to 'cpu/mpc5xxx/serial.c')
| -rw-r--r-- | cpu/mpc5xxx/serial.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c new file mode 100644 index 0000000..54ecf5b --- /dev/null +++ b/cpu/mpc5xxx/serial.c @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2000 - 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with + * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the + * Linux/PPC sources (m8260_tty.c had no copyright info in it). + */ + +/* + * Minimal serial functions needed to use one of the PSC ports + * as serial console interface. + */ + +#include <common.h> +#include <mpc5xxx.h> + +#if defined(CONFIG_PSC_CONSOLE) + +#if CONFIG_PSC_CONSOLE == 1 +#define PSC_BASE MPC5XXX_PSC1 +#elif CONFIG_PSC_CONSOLE == 2 +#define PSC_BASE MPC5XXX_PSC2 +#elif CONFIG_PSC_CONSOLE == 3 +#define PSC_BASE MPC5XXX_PSC3 +#elif defined(CONFIG_MGT5100) +#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3 +#elif CONFIG_PSC_CONSOLE == 4 +#define PSC_BASE MPC5XXX_PSC4 +#elif CONFIG_PSC_CONSOLE == 5 +#define PSC_BASE MPC5XXX_PSC5 +#elif CONFIG_PSC_CONSOLE == 6 +#define PSC_BASE MPC5XXX_PSC6 +#else +#error CONFIG_PSC_CONSOLE must be in 1 ... 6 +#endif + +int serial_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; + unsigned long baseclk; + int div; + + /* reset PSC */ + psc->command = PSC_SEL_MODE_REG_1; + + /* select clock sources */ +#if defined(CONFIG_MGT5100) + psc->psc_clock_select = 0xdd00; + baseclk = CFG_MPC5XXX_CLKIN / 32; +#elif defined(CONFIG_MPC5200) + psc->psc_clock_select = 0; + baseclk = gd->ipb_clk / 32; +#endif + + /* switch to UART mode */ + psc->sicr = 0; + + /* configure parity, bit length and so on */ +#if defined(CONFIG_MGT5100) + psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; +#elif defined(CONFIG_MPC5200) + psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; +#endif + psc->mode = PSC_MODE_ONE_STOP; + + /* set up UART divisor */ + div = baseclk / gd->baudrate; + psc->ctur = div >> 8; + psc->ctlr = div & 0xff; + + /* disable all interrupts */ + psc->psc_imr = 0; + + /* reset and enable Rx/Tx */ + psc->command = PSC_RST_RX; + psc->command = PSC_RST_TX; + psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; + + return (0); +} + +void +serial_putc(const char c) +{ + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(psc->psc_status & PSC_SR_TXEMP)) + ; + + psc->psc_buffer_8 = c; +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int +serial_getc(void) +{ + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; + + /* Wait for a character to arrive. */ + while (!(psc->psc_status & PSC_SR_RXRDY)) + ; + + return psc->psc_buffer_8; +} + +int +serial_tstc(void) +{ + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; + + return (psc->psc_status & PSC_SR_RXRDY); +} + +void +serial_setbrg(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; + unsigned long baseclk, div; + +#if defined(CONFIG_MGT5100) + baseclk = CFG_MPC5XXX_CLKIN / 32; +#elif defined(CONFIG_MPC5200) + baseclk = gd->ipb_clk / 32; +#endif + + /* set up UART divisor */ + div = baseclk / gd->baudrate; + psc->ctur = div >> 8; + psc->ctlr = div & 0xff; +} +#endif /* CONFIG_PSC_CONSOLE */ |