summaryrefslogtreecommitdiff
path: root/cpu/mpc5xxx/i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc5xxx/i2c.c')
-rw-r--r--cpu/mpc5xxx/i2c.c442
1 files changed, 0 insertions, 442 deletions
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
deleted file mode 100644
index 4f7f716..0000000
--- a/cpu/mpc5xxx/i2c.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc5xxx.h>
-#include <i2c.h>
-
-#if (CONFIG_SYS_I2C_MODULE == 2)
-#define I2C_BASE MPC5XXX_I2C2
-#elif (CONFIG_SYS_I2C_MODULE == 1)
-#define I2C_BASE MPC5XXX_I2C1
-#else
-#error CONFIG_SYS_I2C_MODULE is not properly configured
-#endif
-
-#define I2C_TIMEOUT 6667
-#define I2C_RETRIES 3
-
-struct mpc5xxx_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 *reg);
-static void mpc_reg_out (volatile u32 *reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in(volatile u32 *reg)
-{
- int ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out(volatile u32 *reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in(reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in(&regs->msr);
-
- while (timeout-- && (status & I2C_BB)) {
-#if 1
- volatile int temp;
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- temp = mpc_reg_in(&regs->mdr);
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- mpc_reg_out(&regs->mcr, 0, 0);
- mpc_reg_out(&regs->mcr, I2C_EN, 0);
-#endif
- udelay(15);
- status = mpc_reg_in(&regs->msr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin(int *status)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in(&regs->msr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay(15);
- *status = mpc_reg_in(&regs->msr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out(&regs->msr, 0, I2C_IF);
-
- return 0;
-}
-
-static int do_address(uchar chip, char rdwr_flag)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag) {
- chip |= 1;
- }
-
- mpc_reg_out(&regs->mcr, I2C_TX, I2C_TX);
- mpc_reg_out(&regs->mdr, chip, 0);
-
- if (wait_for_pin(&status)) {
- return -2;
- }
-
- if (status & I2C_RXAK) {
- return -3;
- }
-
- return 0;
-}
-
-static int send_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out(&regs->mdr, buf[wrcount], 0);
-
- if (wait_for_pin(&status)) {
- break;
- }
-
- if (status & I2C_RXAK) {
- break;
- }
-
- }
-
- return !(wrcount == len);
-}
-
-static int receive_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out(&regs->mcr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in(&regs->mdr);
-
- if (dummy) {
- dummy = 0;
- } else {
- rdcount++;
- }
-
-
- if (wait_for_pin(&status)) {
- return -4;
- }
- }
-
- mpc_reg_out(&regs->mcr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in(&regs->mdr);
-
- if (wait_for_pin(&status)) {
- return -5;
- }
-
- mpc_reg_out(&regs->mcr, 0, I2C_TXAK);
-
- return 0;
-}
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
-
-#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
-#define FDR432(x) (u8) ((x & 0x1C) >> 2)
-/*
- * Reset any i2c devices that may have been interrupted during a system reset.
- * Normally this would be accomplished by clocking the line until SCL and SDA
- * are released and then sending a start condtiion (From an Atmel datasheet).
- * There is no direct access to the i2c pins so instead create start commands
- * through the i2c interface. Send a start command then delay for the SDA Hold
- * time, repeat this by disabling/enabling the bus a total of 9 times.
- */
-static void send_reset(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
- u32 delay;
- u8 fdr;
- int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- fdr = (u8)mpc_reg_in(&regs->mfdr);
-
- delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
- scltap[FDR432(fdr)].tap2tap) + 3;
-
- for (i = 0; i < 9; i++) {
- mpc_reg_out(&regs->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
- udelay(delay);
- mpc_reg_out(&regs->mcr, 0, I2C_INIT_MASK);
- udelay(delay);
- }
-
- mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
-}
-#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
-
-/**************** I2C API ****************/
-
-void i2c_init(int speed, int saddr)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
-
- mpc_reg_out(&regs->mcr, 0, 0);
- mpc_reg_out(&regs->madr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out(&regs->mfdr, mpc_get_fdr(speed), 0);
-
- /* Enable module
- */
- mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out(&regs->msr, 0, I2C_IF);
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
- send_reset();
-#endif
- return;
-}
-
-static int mpc_get_fdr(int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->ipb_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed*scl) {
- if ((speed*scl - ipb) < bestmatch) {
- bestmatch = speed*scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb/scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- if (gd->have_console)
- printf("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe(uchar chip)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
-
- if (! do_address(chip, 0)) {
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- udelay(500);
- break;
- }
-
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- udelay(500);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
- if (do_address(chip, 1)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
generated by cgit v1.1 at 2024-07-17 02:20:45 +0000