diff options
Diffstat (limited to 'cpu/mpc512x/cpu.c')
| -rw-r--r-- | cpu/mpc512x/cpu.c | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c deleted file mode 100644 index 09cbd20..0000000 --- a/cpu/mpc512x/cpu.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * (C) Copyright 2007-2010 DENX Software Engineering - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * CPU specific code for the MPC512x family. - * - * Derived from the MPC83xx code. - */ - -#include <common.h> -#include <command.h> -#include <net.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/io.h> - -#if defined(CONFIG_OF_LIBFDT) -#include <fdt_support.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int checkcpu (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - ulong clock = gd->cpu_clk; - u32 pvr = get_pvr (); - u32 spridr = in_be32(&immr->sysconf.spridr); - char buf1[32], buf2[32]; - - puts ("CPU: "); - - switch (spridr & 0xffff0000) { - case SPR_5121E: - puts ("MPC5121e "); - break; - default: - printf ("Unknown part ID %08x ", spridr & 0xffff0000); - } - printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); - - switch (pvr & 0xffff0000) { - case PVR_E300C4: - puts ("e300c4 "); - break; - default: - puts ("unknown "); - } - printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n", - strmhz(buf1, clock), - strmhz(buf2, gd->csb_clk), - gd->reset_status & 0xffff); - return 0; -} - - -int -do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - ulong msr; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~( MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); - - /* - * Enable Reset Control Reg - "RSTE" is the magic word that let us go - */ - out_be32(&immap->reset.rpr, 0x52535445); - - /* Verify Reset Control Reg is enabled */ - while (!(in_be32(&immap->reset.rcer) & RCER_CRE)) - ; - - printf ("Resetting the board.\n"); - udelay(200); - - /* Perform reset */ - out_be32(&immap->reset.rcr, RCR_SWHR); - - /* Unreached... */ - return 1; -} - - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - */ -unsigned long get_tbclk (void) -{ - ulong tbclk; - - tbclk = (gd->bus_clk + 3L) / 4L; - - return tbclk; -} - - -#if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - /* Reset watchdog */ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - out_be32(&immr->wdt.swsrr, 0x556c); - out_be32(&immr->wdt.swsrr, 0xaa39); - - if (re_enable) - enable_interrupts (); -} -#endif - -#ifdef CONFIG_OF_LIBFDT - -#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -/* - * fdt setup for old device trees - * fix up - * cpu clocks - * soc clocks - * ethernet addresses - */ -static void old_ft_cpu_setup(void *blob, bd_t *bd) -{ - /* - * avoid fixing up by path because that - * produces scary error messages - */ - uchar enetaddr[6]; - - /* - * old device trees have ethernet nodes with - * device_type = "network" - */ - eth_getenv_enetaddr("ethaddr", enetaddr); - do_fixup_by_prop(blob, "device_type", "network", 8, - "local-mac-address", enetaddr, 6, 0); - do_fixup_by_prop(blob, "device_type", "network", 8, - "address", enetaddr, 6, 0); - /* - * old device trees have soc nodes with - * device_type = "soc" - */ - do_fixup_by_prop_u32(blob, "device_type", "soc", 4, - "bus-frequency", bd->bi_ipsfreq, 0); -} -#endif - -static void ft_clock_setup(void *blob, bd_t *bd) -{ - char *cpu_path = "/cpus/" OF_CPU; - - /* - * fixup cpu clocks using path - */ - do_fixup_by_path_u32(blob, cpu_path, - "timebase-frequency", OF_TBCLK, 1); - do_fixup_by_path_u32(blob, cpu_path, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_path_u32(blob, cpu_path, - "clock-frequency", bd->bi_intfreq, 1); - /* - * fixup soc clocks using compatible - */ - do_fixup_by_compat_u32(blob, OF_SOC_COMPAT, - "bus-frequency", bd->bi_ipsfreq, 1); -} - -void ft_cpu_setup(void *blob, bd_t *bd) -{ -#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES - old_ft_cpu_setup(blob, bd); -#endif - ft_clock_setup(blob, bd); -#ifdef CONFIG_HAS_ETH0 - fdt_fixup_ethernet(blob); -#endif - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} -#endif - -#ifdef CONFIG_MPC512x_FEC -/* Default initializations for FEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) - */ - -int cpu_eth_init(bd_t *bis) -{ - return mpc512x_fec_initialize(bis); -} -#endif |