summaryrefslogtreecommitdiff
path: root/cpu/mcf5445x
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mcf5445x')
-rw-r--r--cpu/mcf5445x/cpu_init.c2
-rw-r--r--cpu/mcf5445x/speed.c67
-rw-r--r--cpu/mcf5445x/start.S256
3 files changed, 302 insertions, 23 deletions
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index e07748b..51a9e90 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -61,11 +61,13 @@ void cpu_init_f(void)
GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | GPIO_PAR_FBCTL_RW_RW |
GPIO_PAR_FBCTL_TS_TS;
+#if !defined(CONFIG_CF_SBF)
#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
fbcs->csar0 = CFG_CS0_BASE;
fbcs->cscr0 = CFG_CS0_CTRL;
fbcs->csmr0 = CFG_CS0_MASK;
#endif
+#endif
#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
/* Latch chipselect */
diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c
index 967becf..f677f3c 100644
--- a/cpu/mcf5445x/speed.c
+++ b/cpu/mcf5445x/speed.c
@@ -84,26 +84,29 @@ void clock_exit_limp(void)
*/
int get_clocks(void)
{
+
volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
- volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
- volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14);
int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
int pllmult_pci[] = { 12, 6, 16, 8 };
- int vco, bPci, temp, fbtemp, pcrvalue;
+ int vco = 0, bPci, temp, fbtemp, pcrvalue;
int *pPllmult = NULL;
u16 fbpll_mask;
- u8 cpldmode;
+
+#ifdef CONFIG_M54455EVB
+ volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
+#endif
+ u8 bootmode;
/* To determine PCI is present or not */
if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) ||
((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
pPllmult = &pllmult_pci[0];
- fbpll_mask = 3;
+ fbpll_mask = 3; /* 11b */
bPci = 1;
} else {
pPllmult = &pllmult_nopci[0];
- fbpll_mask = 7;
+ fbpll_mask = 7; /* 111b */
#ifdef CONFIG_PCI
gd->pci_clk = 0;
#endif
@@ -111,20 +114,36 @@ int get_clocks(void)
}
#ifdef CONFIG_M54455EVB
- /* Temporary place here, belongs in board/freescale/... */
- /* Temporary read from CCR- fixed fb issue, must be the same clock
- as pci or input clock, causing cpld/fpga read inconsistancy */
- fbtemp = pPllmult[ccm->ccr & fbpll_mask];
+ bootmode = (*cpld & 0x03);
- /* Break down into small pieces, code still in flex bus */
- pcrvalue = pll->pcr & 0xFFFFF0FF;
- temp = fbtemp - 1;
- pcrvalue |= PLL_PCR_OUTDIV3(temp);
+ if (bootmode != 3) {
+ /* Temporary read from CCR- fixed fb issue, must be the same clock
+ as pci or input clock, causing cpld/fpga read inconsistancy */
+ fbtemp = pPllmult[ccm->ccr & fbpll_mask];
+ /* Break down into small pieces, code still in flex bus */
+ pcrvalue = pll->pcr & 0xFFFFF0FF;
+ temp = fbtemp - 1;
+ pcrvalue |= PLL_PCR_OUTDIV3(temp);
+
+ pll->pcr = pcrvalue;
+ }
+#endif
+#ifdef CONFIG_M54451EVB
+ /* No external logic to read the bootmode, hard coded from built */
+#ifdef CONFIG_CF_SBF
+ bootmode = 3;
+#else
+ bootmode = 2;
+
+ /* default value is 16 mul, set to 20 mul */
+ pcrvalue = (pll->pcr & 0x00FFFFFF) | 0x14000000;
pll->pcr = pcrvalue;
+ while ((pll->psr & PLL_PSR_LOCK) != PLL_PSR_LOCK);
+#endif
+#endif
- cpldmode = *cpld & 0x03;
- if (cpldmode == 0) {
+ if (bootmode == 0) {
/* RCON mode */
vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC;
@@ -151,14 +170,22 @@ int get_clocks(void)
pll->pcr = pcrvalue;
}
gd->vco_clk = vco; /* Vco clock */
- } else if (cpldmode == 2) {
+ } else if (bootmode == 2) {
/* Normal mode */
- vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC;
+ vco = ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+ if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
+ /* Default value */
+ pcrvalue = (pll->pcr & 0x00FFFFFF);
+ pcrvalue |= pPllmult[ccm->ccr & fbpll_mask] << 24;
+ pll->pcr = pcrvalue;
+ vco = ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+ }
gd->vco_clk = vco; /* Vco clock */
- } else if (cpldmode == 3) {
+ } else if (bootmode == 3) {
/* serial mode */
+ vco = ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+ gd->vco_clk = vco; /* Vco clock */
}
-#endif /* CONFIG_M54455EVB */
if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
/* Limp mode */
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index 89ec7bc..2a6019b 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -46,15 +46,30 @@
addl #60,%sp; /* space for 15 regs */ \
rte;
+#if defined(CONFIG_CF_SBF)
+#define ASM_DRAMINIT (asm_dram_init - TEXT_BASE + CFG_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - TEXT_BASE + CFG_INIT_RAM_ADDR)
+#endif
+
.text
+
/*
* Vector table. This is used for initial platform startup.
* These vectors are to catch any un-intended traps.
*/
_vectors:
+#if defined(CONFIG_CF_SBF)
+
+INITSP: .long 0 /* Initial SP */
+INITPC: .long ASM_DRAMINIT /* Initial PC */
+
+#else
+
+INITSP: .long 0 /* Initial SP */
+INITPC: .long _START /* Initial PC */
+
+#endif
-INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
@@ -83,6 +98,8 @@ vector1D: .long _FAULT /* Autovector Level 5 */
vector1E: .long _FAULT /* Autovector Level 6 */
vector1F: .long _FAULT /* Autovector Level 7 */
+#if !defined(CONFIG_CF_SBF)
+
/* TRAP #0 - #15 */
vector20_2F:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -122,9 +139,237 @@ vector192_255:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+#endif
- .text
+#if defined(CONFIG_CF_SBF)
+ /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
+asm_sbf_img_hdr:
+ .long 0x00000000 /* checksum, not yet implemented */
+ .long 0x00030000 /* image length */
+ .long TEXT_BASE /* image to be relocated at */
+
+asm_dram_init:
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1 /* init Rambar */
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+
+ /* Must disable global address */
+ move.l #0xFC008000, %a1
+ move.l #(CFG_CS0_BASE), (%a1)
+ move.l #0xFC008008, %a1
+ move.l #(CFG_CS0_CTRL), (%a1)
+ move.l #0xFC008004, %a1
+ move.l #(CFG_CS0_MASK), (%a1)
+
+ /*
+ * Dram Initialization
+ * a1, a2, and d0
+ */
+ /* mscr sdram */
+ move.l #0xFC0A4074, %a1
+ move.b #(CFG_SDRAM_DRV_STRENGTH), (%a1)
+ nop
+
+ /* SDRAM Chip 0 and 1 */
+ move.l #0xFC0B8110, %a1
+ move.l #0xFC0B8114, %a2
+
+ /* calculate the size */
+ move.l #0x13, %d1
+ move.l #(CFG_SDRAM_SIZE), %d2
+#ifdef CFG_SDRAM_BASE1
+ lsr.l #1, %d2
+#endif
+
+dramsz_loop:
+ lsr.l #1, %d2
+ add.l #1, %d1
+ cmp.l #1, %d2
+ bne dramsz_loop
+
+ /* SDRAM Chip 0 and 1 */
+ move.l #(CFG_SDRAM_BASE), (%a1)
+ or.l %d1, (%a1)
+#ifdef CFG_SDRAM_BASE1
+ move.l #(CFG_SDRAM_BASE1), (%a2)
+ or.l %d1, (%a2)
+#endif
+ nop
+
+ /* dram cfg1 and cfg2 */
+ move.l #0xFC0B8008, %a1
+ move.l #(CFG_SDRAM_CFG1), (%a1)
+ nop
+ move.l #0xFC0B800C, %a2
+ move.l #(CFG_SDRAM_CFG2), (%a2)
+ nop
+
+ move.l #0xFC0B8000, %a1 /* Mode */
+ move.l #0xFC0B8004, %a2 /* Ctrl */
+
+#ifdef CONFIG_M54455EVB
+ /* Issue PALL */
+ move.l #(CFG_SDRAM_CTRL + 2), (%a2)
+ nop
+
+ /* Issue LEMR */
+ move.l #(CFG_SDRAM_EMOD + 0x408), (%a1)
+ nop
+ move.l #(CFG_SDRAM_MODE + 0x300), (%a1)
+ nop
+
+ move.l #1000, %d0
+wait1000:
+ nop
+ subq.l #1, %d0
+ bne wait1000
+#endif
+
+ /* Issue PALL */
+ move.l #(CFG_SDRAM_CTRL + 2), (%a2)
+ nop
+
+ /* Perform two refresh cycles */
+ move.l #(CFG_SDRAM_CTRL + 4), %d0
+ nop
+ move.l %d0, (%a2)
+ move.l %d0, (%a2)
+ nop
+#ifdef CONFIG_M54455EVB
+ move.l #(CFG_SDRAM_MODE + 0x200), (%a1)
+ nop
+#elif defined(CONFIG_M54451EVB)
+ /* Issue LEMR */
+ move.l #(CFG_SDRAM_MODE), (%a2)
+ nop
+ move.l #(CFG_SDRAM_EMOD), (%a2)
+ nop
+#endif
+
+ move.l #500, %d0
+wait500:
+ nop
+ subq.l #1, %d0
+ bne wait500
+
+ move.l #(CFG_SDRAM_CTRL), %d0
+ and.l #0x7FFFFFFF, %d0
+#ifdef CONFIG_M54455EVB
+ or.l #0x10000c00, %d0
+#elif defined(CONFIG_M54451EVB)
+ or.l #0x10000000, %d0
+#endif
+ move.l %d0, (%a2)
+ nop
+
+ /*
+ * DSPI Initialization
+ * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h
+ * a1 - dspi status
+ * a2 - dtfr
+ * a3 - drfr
+ * a4 - Dst addr
+ */
+ /* Enable pins for DSPI mode - chip-selects are enabled later */
+ move.l #0xFC0A4063, %a0
+ move.b #0x7F, (%a0)
+
+ /* Configure DSPI module */
+ move.l #0xFC05C000, %a0
+ move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */
+
+ move.l #0xFC05C00C, %a0
+ move.l #0x3E000011, (%a0)
+
+ move.l #0xFC05C034, %a2 /* dtfr */
+ move.l #0xFC05C03B, %a3 /* drfr */
+
+ move.l #(ASM_SBF_IMG_HDR + 4), %a1
+ move.l (%a1)+, %d5
+ move.l (%a1), %a4
+
+ move.l #(CFG_INIT_RAM_ADDR + CFG_SBFHDR_DATA_OFFSET), %a0
+ move.l #(CFG_SBFHDR_SIZE), %d4
+
+ move.l #0xFC05C02C, %a1 /* dspi status */
+
+ /* Issue commands and address */
+ move.l #0x8002000B, %d2 /* Fast Read Cmd */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.l #0x80020000, %d2 /* Address byte 2 */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.l #0x80020000, %d2 /* Address byte 1 */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.l #0x80020000, %d2 /* Address byte 0 */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.l #0x80020000, %d2 /* Dummy Wr and Rd */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ /* Transfer serial boot header to sram */
+asm_dspi_rd_loop1:
+ move.l #0x80020000, %d2
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.b %d1, (%a0) /* read, copy to dst */
+
+ add.l #1, %a0 /* inc dst by 1 */
+ sub.l #1, %d4 /* dec cnt by 1 */
+ bne asm_dspi_rd_loop1
+
+ /* Transfer u-boot from serial flash to memory */
+asm_dspi_rd_loop2:
+ move.l #0x80020000, %d2
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ move.b %d1, (%a4) /* read, copy to dst */
+
+ add.l #1, %a4 /* inc dst by 1 */
+ sub.l #1, %d5 /* dec cnt by 1 */
+ bne asm_dspi_rd_loop2
+
+ move.l #0x00020000, %d2 /* Terminate */
+ jsr asm_dspi_wr_status
+ jsr asm_dspi_rd_status
+
+ /* jump to memory and execute */
+ move.l #(TEXT_BASE + 0x400), %a0
+ jmp (%a0)
+
+asm_dspi_wr_status:
+ move.l (%a1), %d0 /* status */
+ and.l #0x0000F000, %d0
+ cmp.l #0x00003000, %d0
+ bgt asm_dspi_wr_status
+
+ move.l %d2, (%a2)
+ rts
+
+asm_dspi_rd_status:
+ move.l (%a1), %d0 /* status */
+ and.l #0x000000F0, %d0
+ lsr.l #4, %d0
+ cmp.l #0, %d0
+ beq asm_dspi_rd_status
+
+ move.b (%a3), %d1
+ rts
+#endif /* CONFIG_CF_SBF */
+
+ .text
+ . = 0x400
.globl _start
_start:
nop
@@ -132,11 +377,16 @@ _start:
move.w #0x2700,%sr /* Mask off Interrupt */
/* Set vector base register at the beginning of the Flash */
+#if defined(CONFIG_CF_SBF)
+ move.l #TEXT_BASE, %d0
+ movec %d0, %VBR
+#else
move.l #CFG_FLASH_BASE, %d0
movec %d0, %VBR
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
movec %d0, %RAMBAR1
+#endif
/* initialize general use internal ram */
move.l #0, %d0
generated by cgit v1.1 at 2024-11-25 15:57:51 +0000