diff options
Diffstat (limited to 'cpu/mcf5445x/speed.c')
| -rw-r--r-- | cpu/mcf5445x/speed.c | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c new file mode 100644 index 0000000..967becf --- /dev/null +++ b/cpu/mcf5445x/speed.c @@ -0,0 +1,186 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> + +#include <asm/immap.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Low Power Divider specifications + */ +#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ +#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ + +#define CLOCK_PLL_FVCO_MAX 540000000 +#define CLOCK_PLL_FVCO_MIN 300000000 + +#define CLOCK_PLL_FSYS_MAX 266666666 +#define CLOCK_PLL_FSYS_MIN 100000000 +#define MHZ 1000000 + +void clock_enter_limp(int lpdiv) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + int i, j; + + /* Check bounds of divider */ + if (lpdiv < CLOCK_LPD_MIN) + lpdiv = CLOCK_LPD_MIN; + if (lpdiv > CLOCK_LPD_MAX) + lpdiv = CLOCK_LPD_MAX; + + /* Round divider down to nearest power of two */ + for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; + + /* Apply the divider to the system clock */ + ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i); + + /* Enable Limp Mode */ + ccm->misccr |= CCM_MISCCR_LIMP; +} + +/* + * brief Exit Limp mode + * warning The PLL should be set and locked prior to exiting Limp mode + */ +void clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + + /* Exit Limp mode */ + ccm->misccr &= ~CCM_MISCCR_LIMP; + + /* Wait for the PLL to lock */ + while (!(pll->psr & PLL_PSR_LOCK)) ; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3); + volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14); + int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; + int pllmult_pci[] = { 12, 6, 16, 8 }; + int vco, bPci, temp, fbtemp, pcrvalue; + int *pPllmult = NULL; + u16 fbpll_mask; + u8 cpldmode; + + /* To determine PCI is present or not */ + if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || + ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { + pPllmult = &pllmult_pci[0]; + fbpll_mask = 3; + bPci = 1; + } else { + pPllmult = &pllmult_nopci[0]; + fbpll_mask = 7; +#ifdef CONFIG_PCI + gd->pci_clk = 0; +#endif + bPci = 0; + } + +#ifdef CONFIG_M54455EVB + /* Temporary place here, belongs in board/freescale/... */ + /* Temporary read from CCR- fixed fb issue, must be the same clock + as pci or input clock, causing cpld/fpga read inconsistancy */ + fbtemp = pPllmult[ccm->ccr & fbpll_mask]; + + /* Break down into small pieces, code still in flex bus */ + pcrvalue = pll->pcr & 0xFFFFF0FF; + temp = fbtemp - 1; + pcrvalue |= PLL_PCR_OUTDIV3(temp); + + pll->pcr = pcrvalue; + + cpldmode = *cpld & 0x03; + if (cpldmode == 0) { + /* RCON mode */ + vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC; + + if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { + /* invaild range, re-set in PCR */ + int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + int i, j, bus; + + j = (pll->pcr & 0xFF000000) >> 24; + for (i = j; i < 0xFF; i++) { + vco = i * CFG_INPUT_CLKSRC; + if (vco >= CLOCK_PLL_FVCO_MIN) { + bus = vco / temp; + if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) + continue; + else + break; + } + } + pcrvalue = pll->pcr & 0x00FF00FF; + fbtemp = ((i - 1) << 8) | ((i - 1) << 12); + pcrvalue |= ((i << 24) | fbtemp); + + pll->pcr = pcrvalue; + } + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 2) { + /* Normal mode */ + vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC; + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 3) { + /* serial mode */ + } +#endif /* CONFIG_M54455EVB */ + + if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { + /* Limp mode */ + } else { + gd->inp_clk = CFG_INPUT_CLKSRC; /* Input clock */ + + temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; + gd->flb_clk = vco / temp; /* FlexBus clock */ + +#ifdef CONFIG_PCI + if (bPci) { + temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; + gd->pci_clk = vco / temp; /* PCI clock */ + } +#endif + } + + return (0); +} |