1 files changed, 47 insertions, 20 deletions

diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c
index 967becf..f677f3c 100644
--- a/cpu/mcf5445x/speed.c
+++ b/cpu/mcf5445x/speed.c
@@ -84,26 +84,29 @@ void clock_exit_limp(void)
  */
 int get_clocks(void)
 {
+
 	volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
 	volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
-	volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
-	volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14);
 	int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
 	int pllmult_pci[] = { 12, 6, 16, 8 };
-	int vco, bPci, temp, fbtemp, pcrvalue;
+	int vco = 0, bPci, temp, fbtemp, pcrvalue;
 	int *pPllmult = NULL;
 	u16 fbpll_mask;
-	u8 cpldmode;
+
+#ifdef CONFIG_M54455EVB
+	volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
+#endif
+	u8 bootmode;
 
 	/* To determine PCI is present or not */
 	if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) ||
 	    ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
 		pPllmult = &pllmult_pci[0];
-		fbpll_mask = 3;
+		fbpll_mask = 3;		/* 11b */
 		bPci = 1;
 	} else {
 		pPllmult = &pllmult_nopci[0];
-		fbpll_mask = 7;
+		fbpll_mask = 7;		/* 111b */
 #ifdef CONFIG_PCI
 		gd->pci_clk = 0;
 #endif
@@ -111,20 +114,36 @@ int get_clocks(void)
 	}
 
 #ifdef CONFIG_M54455EVB
-	/* Temporary place here, belongs in board/freescale/... */
-	/* Temporary read from CCR- fixed fb issue, must be the same clock
-	   as pci or input clock, causing cpld/fpga read inconsistancy */
-	fbtemp = pPllmult[ccm->ccr & fbpll_mask];
+	bootmode = (*cpld & 0x03);
 
-	/* Break down into small pieces, code still in flex bus */
-	pcrvalue = pll->pcr & 0xFFFFF0FF;
-	temp = fbtemp - 1;
-	pcrvalue |= PLL_PCR_OUTDIV3(temp);
+	if (bootmode != 3) {
+		/* Temporary read from CCR- fixed fb issue, must be the same clock
+		   as pci or input clock, causing cpld/fpga read inconsistancy */
+		fbtemp = pPllmult[ccm->ccr & fbpll_mask];
 
+		/* Break down into small pieces, code still in flex bus */
+		pcrvalue = pll->pcr & 0xFFFFF0FF;
+		temp = fbtemp - 1;
+		pcrvalue |= PLL_PCR_OUTDIV3(temp);
+
+		pll->pcr = pcrvalue;
+	}
+#endif
+#ifdef CONFIG_M54451EVB
+	/* No external logic to read the bootmode, hard coded from built */
+#ifdef CONFIG_CF_SBF
+	bootmode = 3;
+#else
+	bootmode = 2;
+
+	/* default value is 16 mul, set to 20 mul */
+	pcrvalue = (pll->pcr & 0x00FFFFFF) | 0x14000000;
 	pll->pcr = pcrvalue;
+	while ((pll->psr & PLL_PSR_LOCK) != PLL_PSR_LOCK);
+#endif
+#endif
 
-	cpldmode = *cpld & 0x03;
-	if (cpldmode == 0) {
+	if (bootmode == 0) {
 		/* RCON mode */
 		vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC;
 
@@ -151,14 +170,22 @@ int get_clocks(void)
 			pll->pcr = pcrvalue;
 		}
 		gd->vco_clk = vco;	/* Vco clock */
-	} else if (cpldmode == 2) {
+	} else if (bootmode == 2) {
 		/* Normal mode */
-		vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC;
+		vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
+			/* Default value */
+			pcrvalue = (pll->pcr & 0x00FFFFFF);
+			pcrvalue |= pPllmult[ccm->ccr & fbpll_mask] << 24;
+			pll->pcr = pcrvalue;
+			vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+		}
 		gd->vco_clk = vco;	/* Vco clock */
-	} else if (cpldmode == 3) {
+	} else if (bootmode == 3) {
 		/* serial mode */
+		vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+		gd->vco_clk = vco;	/* Vco clock */
 	}
-#endif				/* CONFIG_M54455EVB */
 
 	if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
 		/* Limp mode */